New to Windows RC 7 - ?connect to printer thru Airport Extreme

Okay - been a mac person forever, but have to access Windows info occasionally.
I installed RC 7 on an internal drive (directly, not via BootCamp). I am trying to set up the shared printer (HPO LaserJet 1300)I have connected via USB to my wired Airport Extreme. I was wondering if someone could guide me through the Windows RC connection to printer with this configuration for dummies?
Thanks!

The first thing I would suggest is to download and install Bonjour for Windows. Although the current version of Bonjour is for Window XP or Vista, it should work with Windows 7. The link provides both a 32- & 64-bit version to handle just about any variation of Windows.
Then check out this iFelix article: Installing Bonjour for Windows on a Vista Business Edition PC. Again, its written for Vista, but you may be able to transpose the instructions to make fit for Windows 7.

Similar Messages

Unable to connect Brother printer to Airport Extreme using USB

Hi, I recently bought a Brother HL-2270DW printer, which has 802.11 b/g wireless capabilities. My airport extreme (2008 model) is set to 802.11 n (5 ghz), so I can't set-up the printer wirelessly to the airport extreme without changing to 802.11 b/g. Instead I'm fine hooking up the printer to the airport extreme using a USB. When I first turn on the printer, I can print from my Macbook, but after a few minutes, the printer goes offline and has to be turned off/on. When I try to Open Printer Utility, there is a connection error. I have the right driver installed, and I can print fine for a few minutes after turning on the printer, and all the time when the printer is connected to the Macbook directly using the USB. I would like to use the printer by connecting it to the airport extreme using the USB or Ethernet. Any help would be much appreciated, thanks,

Please explain exactly what you're experiencing that leads you to claim that.
The current firmware of the TiVo Premier is easily confused about whether it's connected to the Internet or not. In my experience, a TiVo unit will quickly regain its senses and decide that it really is connected.

I cannot print from windows xp to a usb printer using airport extreme v5

I just bought the new airport Extreme, loaded Bonjour on a lenovo t400 running win xp sp3.
I can print with the printer plugged in to the computer but cannot print using the bonjour setup. I can print from my Imac connected to the airport extreme (hard wired) and wirelessly from my macbook.
I have no issues connecting to the web through the Airport Extreme with the PC.
I have all the proper drivers installed.
the Printer in question is a lexmark P910 Series and the drivers loaded with bonjour.
Any thoughts on why I cannot print using the PC?
Thanks

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Open discoverer report in new browser window and without connections page

Hi All,
We are using Oracle 11g Discoverer 11.1.1.4. Requirement is to open the discoverer report in a new browser window and without connections page.
When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
This excerpt is from the documentation available in the link
" _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
and Here is what we use to invoke our reports.
http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
Thanks in advance

Closing the thread
We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing.

How to connect my iPad, Brother printer, and AirPort Extreme?

How to connect my iPad, Brother printer, and AirPort Extreme?

I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

My iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, although it will print if connected via USB. Meanwhile, my MacBook (OS 10.5.8) prints still prints wirelessly. Please help.

May iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, though my MacBook (OS 10.5.8) continues to function just fine). The iMac will print if it is connected to the printer directly via USB. The iMac continues to connect to the Internet wirelessly. I've tried resetting the printer and ensuring the driver is up to date, but no joy.
Any suggestions?

EPSON Stylus CX4800 All-in-One Printer
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58606&prodoid=56291 067&infoType=Downloads&platform=Macintosh

Unable to connect HP PSC 1513 printer to Airport Extreme

HI, Hopefully someone can help me. I have a HP PSC 1513 printer which previously worked through my Airport Express. I have since moved to an Airport Extreme and have tried to co locate the printer with the base station. Unfortunately nothing seems to work. I have tried everything and have all the latest software updates installed. Thank you in advance of your assistance.

Desert Walker
By collocate do you mean connecting your printer to your extreme to print wirelessly?
What exactly is your problem?
Can't find printer?
Can't print to printer?
Is it the same as this problem?
http://discussions.apple.com/message.jspa?messageID=5455587#5455587
Or possibly this one
http://discussions.apple.com/thread.jspa?messageID=5455585#5455585
Have you done a thorough search of these discussions?
I have seen plenty of other people with HP problems, the solution may already be out there.
Thanks
Blocko

Can't connect to MacBook with Airport Extreme

I just swapped Airport Extreme base with new Airport Extreme 8012.N and now my Macbook can't connect to internet, keeps cutting out and dropping off. I have an iMac G5 connected via ethernet to Airport Extreme and Macbook in living room. It was working fine with old Airport Extreme router. I also have an Apple Express (not new 8012.N ) but it just blinks orange when plugged in. Any help would be appreciated.

You have to power down everything to start with. Make a clean slate so to speak.
I switched from an older Air Port Express to the new Extreme. Run the new software and when you power back up the new base station should show in the window. Follow the steps. It made me feel stupid the 1st time through and I had to do it again. You have to take your bent paperclip and reset.
After I got the new base station up and running I took the old Express and used it for Airtunes. At first it just blinked and wouldn't show up on the list of devices. I had to do the paperclip thing. And there it was! Green light! Follow the steps for Airtunes. Then I had to reconfigure my settings for my HP 3300 series wireless printer. That wasn't so bad, it all worked.
The machines all work well; we all just need pay close attention to the instructions.
I think that the Apple on line instructions could be a bit more clear. It all worked as it was supposed to but it was certainly a trial and error process.

Printer and AirPort Extreme Base Station with Gigabit Ethernet

Hello!
I own a macbook, one windows xp pc, and two windows vista notebooks. I bought a airport extreme base station. I set it up with my macbook at first and I do a print and it works. I do the same with the others. I install the printers drives to all notebooks. Then tried to print and only one of them worked. They all have bonjour download for windows. So i restarted all the pc's and mac and tried to print and never prints. On the pc's i get a error message. On the mac i get an its busy and never prints. All of them connect to the internet, but no printing. I have the printer connected to the base station. I did two prints and then I couldnt print after that. Internet works. Please i need some help to fix this. Thanks in advance

Hi
Maybe you already have fixed your printing problem. I'm no expert but I sometimes have had printing problems and I feel for you. However, first of all. What sort of printer do you have? It sounds to me that one of the pc printing documents got stuck somewhere on its way to the printer and now it is taking up space on the network (figuratively speaking ofcourse). I can recall something happening to my network/printer some years ago. Unfortunately I can not remember what I did to fix the problem but if I were you I would do the following: First I would disconnect the pc from the network and then try to reset the printer clearing its print memory. Then I would try to get the mac to print again. If succesfull I would take the mac off the network and connect one of the pc's and get that to print. If I succeded I would repeat the procedure with the other pc's. If I wasn't succesfull I would clear the memory again and then try with one of the other pc's. But I would only try one computer at the time to try to isolate the problem. Maybe you have already tried this and since pc's are a mystery to me I dont't know how to help you in that department. However using bonjour on the pc's I would not expect to have problems (though I use Windowc XP print menu on my vertual pc - works fine).
Hope that you will solve your problem soon.
Berit

1 out of 2 computers cannot Print via Airport Extreme

I have an Epson Stylus Photo 1400 connected to the USB connector on my Airport Extreme. I have 2 MacBook Pro Computers connected wireless to the Airport Extreme.
On one of thes computers I have no problem printing over the network on the Epson Printer.
On the other computer, when I want to print a document and click on file/Print, I get the usual dialog box and when I click on print, a fleeting popup is on my screen and nothing prints. The printer queu is empty and it says printer ready. When I plug the printer directly into the USB connector on the computer, it prints fine.
Apple support suggested that I make sure I have the latest printer driver, which I downloaded - no change.
I also reswtored the hardware preferences by booting up while holding down CMDoption+RP - no change.
Has anyone had a similar experience and what was the solution.

wernerne wrote:
On the other computer, when I want to print a document and click on file/Print, I get the usual dialog box and when I click on print, a fleeting popup is on my screen and nothing prints.
make sure I have the latest printer driver, which I downloaded
Did you actually install that driver and create a new printer entry in System Preferences?
This may not fix your problem, but try resetting the printing system: Open the Print & Fax panel of System Preferences, control-click (right-click) on the printer, and select the that entry from the contextual menu.

Can't print with Airport Extreme

I am having trouble printing with Airport Extreme.
My printer is connected to the AE but every time I try to print I get a printer offline message.
I have tried in the past to print wirelessly but have given up.
I just bought a new MacBook Pro so I thought I would give it another go.
Thank you.

Not very much to go on here but I'll give it a stab.
Go to the Airport Utility program located in Applications/Utilities folder.
Run this and select "manual setup" for your AE displayed on the left.
Hit the Printers icon on the top. Your shared printer should be displayed here. If it's not, then ensure it's powered on, good usb connection etc.
After this shows a usb printer connected then go to System Preferences>Print & Fax. You'll see printers you have setup before on the left. A green icon usually means they are available. If print doesn't work to the desired printer the best thing to do is remove the previous definitions by highlighting the printer and hitting the "-" icon.
Now hit the "+" sign and define the shared printer. It should be listed in the resulting "add Printer" dialog. Highlight, change any naming info and click "add".
Printer should now be available. I'm assuming a supported printer that have the device drivers loaded on your system.
That's all I got.

How do I install an HP C4100 printer to airport extreme?

I can connect my C4100 via USB directly to my laptop, but I don't know how to install it to airport extreme. When I attempt to print using airport extreme, I get a connection failure. Can you provide instructions? (I am a new MAC user).
Thanks.

Hi there,
this morning I resolved the printing issue with my HP psc 1217 All in one.
I was almost ready to go into the next computer store to buy a airport compliant device when I found this link for more than 600 printer drivers:
http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs#Printers
My psc 1217 is not directly listed, but works well with the drivert for the 1210 device.
the photosmart C4100 is also listed so it should work as well.
What you have to do is:
go to the page: http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs#Printers
1. download the package: Foomatic-RIP (88k) and install
2. download the package: espgs-7.07.1.ppc.dmg (5.4MB) and install
3. download the package: hpijs-2.7.6.U.dmg and install
go to the printer manager and select the driver from the list you will see a bunch of newly installed printers.- Works well for me and allows me to keep my loved psc1217.
Cheers,
Torsten

Can't connect wireless device to airport extreme

I bought airport extreme router second hand and am connecting it to HP desktop windows 8. All software is installed properly and router is connected. I have a solid green light, and internet access on desktop, but cannot connect wireless devices to network (kindle, cell phone, etc.) All wireless devices show excellent network signal strength, allow me to put the password in, but all show connected and have not internet access.

This appears to be a simple modem, so assuming that you reset the modem completely before you connected it to the AirPort Extreme, the next step would be to check to insure that the AirPort is in router mode and not bridge mode.
Open up AirPort Utility, click on the AirPort Extreme, and then click Manual Setup
Click the Internet icon at the top of the window
Click the Internet Connection tab just below that
Make sure that the setting for Connection Sharing is set to Share a public IP address
Click Update to save any changes, and give the AirPort a full minute to restart
Check the network again to see if devices can connect now.

Why does 2 Airport Expresses connects to one another instead of connecting to the primary Airport Extreme For internet Connectivity ?

I have Netgear DG834G router only for dsl connectivity wifi connectivity to that router is off. i have connected netgear that provides adsl connectivity to the (Shakeel's Airport Extreme) Airport Extreme dual band Wireless N 5th generation via cat 5 cable so airport extreme is the main wifi device through which i get wifi signals at my home. now our house is big and i have installed the adsl netgear modem and airport extreme router at the same place in my room in the upper story but the signals are weak even in the upper story at the other end of the house so i have installed the new airport express dual band wireless N in the upper story (Kafeel's airport express) and it is connected to the primary airport extreme (Shakeel's Airport Extreme) wireless router in range extention mode it repeats the same ssid. Our ground floor has another airport express dual band wireless N the new one ( Lounge's airport express) signal was weak there so i installed another airport express (Lounge's Airport Express) their and configured it to extend the range of primary router airport extreme (Shakeel's Airport Extreme) in the upperstory with the same ssid. Now the problem i am facing that sometimes lounge's airport express connects to kafeel's airport express instead of connecting to the airport extreme and the signals in lounge are weak because all the devices are connected to kafeels airport express and does not connect to lounge air port express. but when lounge airport express is connected to primary router airport extreme then everything works fine devices connect to lounge airport express and signals are full. i have took pictures of the problem i am facing you will understand better by having a look at it. In normal working setup both the airport expresses are connected to airport extreme which is shown in this picture
The second picture shows when lounge airport express is connected to kafeels airport express and not the airport extreme (Shakeel's Airport Extreme) this is the problem.
isnt there a way to correct this so that they dont connect with each other and connect to the airport extreme ?

Lounge's AirPort Express must be located signficantly closer to Shakeel's AirPort Extreme than it is to Kafeel's AirPort Express, and there must be fewer obstructions in the signal path than the other possible connection.
The reason is that if you want Lounge's AirPort Express to connect to Shakeel's AirPort Extreme, it must receive a significantly stronger wireless signal from Shakeel's AirPort Extreme than it does from Kafeel's AirPort Express.

Will Time Machine work with an external hard drive connected (via usb) to Airport Extreme?

Will Time Machine work with an external hard drive connected (via usb) to Airport Extreme?

Sorry, but this article is about 4 years old, and was printed based on preliminary information at the time.
The bottom line here is that Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme.
If it works for you, great.
You might want to review the Apple Support documents below, which are far more recent than the article you reference:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
http://support.apple.com/kb/HT2038
It is supported.....
This is NOT correct. Please do not post false information on the forums.

New to Windows RC 7 - ?connect to printer thru Airport Extreme

Similar Messages

Maybe you are looking for