New to wireless Cant get airport express to join airport extreme network

So... I just got this MBP yesterday along with airport extreme and airport express. I got the base station set up i just cant get the express to connect for the life of me... help anybody? Everything is in range i know that for a fact. I just cant get it configured and i already looked on the airport express support page and followed the instructions and i still can't get it. :-/

Factory reset your Airport Express (AX).
Resetting AirPort Express
http://docs.info.apple.com/article.html?artnum=108044
Connect to the Airport Extreme Network
Use the Airport Assistant to configure a new base station and configure the AX to join an existing wireless network (either use client mode, only extend your network if you need to do so).
iFelix

Similar Messages

HT1731 How does one configure a NEW (unconfigured) AirPort Express to join a WiFi network that has a non-broadcasted SSID?

The following KB article assumes that the user has a configured AirPort Express:
http://support.apple.com/kb/HT1731
I reset my AirPort Express, because the SSID of the WiFi network changed and its name is not broadcast for security reasons.
When using the "AirPort Utility" ( not the "AirPort Admin Utility" – which is the wrong name of the application in the article! ) the application found the unconfigured AirPort Express, connected to the LAN via ethernet; However, when selected, the configuration "wizard" assumes that the user wants to configure the AirPort Express as a WiFi base station.
I selected the option to have the AirPort Express join a WiFi network; However, the AirPort Utility sent back an error, saying that a "Base station" ( WiFi network?! ) could not be found. Well, guess what? That's because the SSID of the network I want the AirPort Express to join.
UGH!
...and the best part is that there is no other solution, but to run with the AirPort Utility's assumptions, configure the AirPort Express as a WiFi Base station, then follow the KB article's instructions ( which are not accurate ) to re-configure the AirPort Express as a WiFi client.
This is a really bad user experience, Apple.
Please try following your own instructions to see how fantastically they fail..then, re-write your KB articles.
Thanks,
PS — If anyone knows of any easier methodologies, do tell. (That's the "question" part of this inquiry )
PPS — My Mac Pro, which I used to configure the AirPort Express, does not have WiFi.
PPPS — Why do all the articles that match searches for "AirPort Express" return articles that refer to "AirPort Base Stations"?! Please, for the love of UX, be consistent!

Here are the basic steps:
Run the AirPort Utility
Select the AirPort Express
Click on Manual Setup
Click on the AirPort icon
Click on the Wireless tab
For Wireless Mode, select the "Join a wireless network" option
In the Wireless Network Name field, enter the SSID of the hidden wireless network you want the Express to join.
Select the approrpriate wireless security type in the Wireless Security window.
Enter the appropriate wireless security password for the hidden network.
Click on Update.

Can't get Express to join established Extreme network

My Extreme base works fine connected via ethernet to an eMac without an AirPort card. My roaming MacBook finds the network, and everything is just swell. Both computers are running 10.4.10. THE PROBLEM OCCURS when I try to set up a wireless delivery system with an Express. I want to extend the reach of my network and use the Express to play my iTunes library on the eMac.
Naturally, I can't set up the Express with the eMac, since the eMac lacks the card. So I use the AirPort Utility on the MacBook. After I reset the Express, the Utility sees both the Extreme and the Express. I proceed to configure the Express, following the steps in the Utility, and it tells me I've done it correctly--though curiously, the Express icon vanishes at the end of the process.
Then things get worse. Both bases have green lights. But the network falls apart. Even though my Internet Connection on my MacBook says I'm on the network, I can't get online ("server not found" error message). And now the AirPort Utility on my MacBook doesn't see the Extreme, only the Express. After quitting the Utility and restarting it--both bases still have green lights--I then can see NEITHER base. (Finally unplugged the Express and reconfigured the Extreme with the AirPort Utility on the eMac to get things back to normal.)
Sorry that was so long. Wanted to be as detailed as possible. Any suggestions?

Wide,
I have a very similar problem as well. I set up a WDS using my Extreme (N) and an Express in a similar fashion to what you are describing. When my iMac (10.4.10) is in the vicinity of the Extreme, it connects without difficulty. The problem arises when I attempt to connect the same iMac using the extended network Express. The iMac sees the network, has a good signal, but cannot connect to the internet. Again, both the Extreme and Express have a green light and are configured properly for a WDS.
Very frustrating,
Jerol

Problem with setting up Airport Express to join an existing network

I want to use an Airport Express to stream music from iTunes to my stereo. I've followed all of the instructions in Airport Utility (latest update) to the end, when the Airport Utility starts to update and loses sight of my airport Express. I get the following message: "Airport Utility was unable to find your AirPort device after restarting. The setting for this AirPort device was successfully updated, but there was a problem in joining the network or the Airport device." After this, the only way I can get back on the internet is to use the Network panel in System Preferences. When I start that off, I get this message: "Airport has the self-assigned IP address x.x.x.x and will not be able to connect to the internet." After rejoining my network, I'm back where I started from, but the MacBook cannot see the Airport Express device. I have to do a Factory Reset, in order to start over. But I end up just where I was: with Airport Utility losing sight of Airport Express and I having to return to Network Preferences to get back on the Internet.

Welcome to the discussions, Matt!
"Airport Utility was unable to find your AirPort device after restarting. The setting for this AirPort device was successfully updated, but there was a problem in joining the network or the Airport device."
This error occurs when the AirPort Express does not receive the correct information to join the wireless network. The settings that you provided were stored successfully on the AirPort Express...what the message does not tell you is that unfortunately they were not the right settings. It's almost always a security setting that causes this error.
Please go into your wireless router and locate the settings page. We need to know the exact type of wireless security that your router is using. When we have this information, we should be able to recommend a compatible setting for the AirPort Express or another setting on your wireless router that will allow a successful connection.

Cannot get Airport Express to join AT&T U-Verse (2Wire) for printing

I just switched to AT&T U-Verse and now cannot get my Airport Express to join the network to provide wireless printing. When I go through Airport Utility to configure the Airport to join an existing network to provide wireless printing it initally states setting change success and begins a restart process from which it never is found on the network again. I contacted Apple Care who was very thourough in running various tests and settings and even checking AT&T 2-Wire network settings. They even replaced my airport (which was 3 years old but covered under the Apple Care I purchased with my new iMac - very cool). However, new Airport Express was still not able to join the network. After another hour of working with Apple Care with the new Express the expert advised the issue must be with AT&T 2-Wire security settings. I contacted AT&T U-Verse internet support and was advised they charge by the hour for network support and there is no guarantee it will be resolved.
Anyone have this issue?

Just found solution from another post from Mark:
I had the same problem... couldn't get the AE to join the network. Here is how I got it to work. Go to the 2Wire config page in safari. For me it's <http://192.168.1.254> Go to settings tab. Go to LAN tab. Go to wireless heading. Under "Security", change "Authentication Type" to "WPA2-PSK (AES)". After the 3800HGV-B reboots, use Airport utility to configure the AE to join the wireless network. I have no idea why, but it works. The light is solid green and I can play Airtunes through my antique AE using iTunes or iPhone. Hope it works for you as well. Mark

HT4259 When a Netgear N 300 wireless router is the base station for my network, what steps do I take to add AirPort Express 802.11n as an network extender?

When a Netgear N 300 wireless router is the base station for my network, what steps do I take to add AirPort Express 802.11n as an network extender?

You don't have to do anything to the netgear.. the Express cannot wirelessly extend non-apple networks. You must plug the Express in by ethernet and create a new wireless network.. this can be the same name (SSID) and security as the netgear so it can become a roaming network.

Trying to update airport express by downloading airport utility 5.6 on my macbook pro/lion. getting error message "version of OS X on this volume is not supported" What does it mean?

Trying to update airport express by downloading Airport Utility 5.6 (which it says I need). When installing I get an error message, "...version of Mac OSX on this volume is not supported." What does it mean/what do I do?

For OS X Lion, you need to download this version directly from Apple Support Downloads.

Help!! can't get my airport express to connect to my network

I have set up my airport express to connect to my network so I can play itunes with it but it says that the Airport has been set up but cannot connect To my network. I've tried it on both my computer and my wife's computer and we have the same problem. I have been able to connect in the past with my Airport express that I had for this one but for some reason I can't seem to connect it using this airport express. Any help would be much appreciated.

When joining a non-Apple WEP encrypted wireless network with an AirPort, you must use one of two different styles for password entry depending on whether the network is protected with an ASCII or HEX key.
ASCII password
If using a password that is plain ASCII text, use the double quotation mark (") before and after the password. These are case-sensitive, and they are at least five characters long for 40-bit encrypted networks or at least 13 characters long for 128-bit encrypted networks.
Hexadecimal password
If using a password that uses only the hexadecimal range of characters, add a dollar sign ($) before the password. These passwords are at least 10 characters long for 40-bit encrypted networks or at least 26 characters long for 128-bit encrypted networks.

HT5664 Just bought a new IMAC. Cant get the iPhoto to open even after apparently loading the library upgraded. Ideas?

Just bought a new IMAC. Cant get the iPhoto to open even after apparently loading the library upgraded. Ideas?

Did you install and RUN the iPhoto Library Upgrader on your library?
OT

How to set Time capsule as base station and airport express to join

I have a wireless network using an Airport express. Now I would like to have time capsule to be set up as the base station and just the airport express to join this network, in order to listen wirelessly to music, but keep the speed of the time capsule.
Right now, the ethernet cable is connected to the Airport express. Do I have to switch that to the Time capsule? I tried to do that, but it wasn't able to connect to the internet in this case.... I am lost. Now I have a speedy time capsule, but have the network running on the slow Airport express... Please help!!! And I believe as you guessed already, I am not a smarty, when it comes to networks.
HELP! Please!!

I actually have mine set up this way that you are looking to do. Works well for me. here si what you can try:
Make sure you unplug the Express all together first. It does interfere when trying to set this up. Next setup your TC just like the instruction says (remember no Express). You should just be able to set up your TC, connect to the internet and get going like any other router or like the Airport Extreme. if you set up your TC with your comp and CANNOT access the internet that is your first problem. My suggestion: do a hard reset of the TC if you have already attached it to the Express while also doing a hard reset of the Express - this is to bring them both back to afctory defaults to start fresh. This definitaely helped me.
So once you have your TC up and running and you have internet access thru your TC, you are halfway there. Make sure your TC shows in the left column of the Airport Utility (and dont forget to install the Airport Utility from the disc that comes with teh TC before you do any of this, forgot that). if it shows up in the left column you should also be able to see the Express in that column, both with green lights, if you have set this up correctly. Then plug in the Express. As the above mentioned remember t make sure it is connected to the correct port on that back of the TC. It will remain amber then blink a few times. This is normal. It should be blinking amber when you attempt the setup of the Express. Your airport utility shoul dnow see the addt base station (Express) in the left column. When you click on it and click CONTINUE it will ask you if you want to switch networks. You can do that and lick switch provided you are already connected to the TC and alrady have an internet connection. Once you click switch the TC will disappear from the left column and you will be left only with the Express. This is OK. I am not in fron to fm y comp right now so I am doing this from memory but in setting up the Express you want to add it to your existing network. You will have to choose which network to add it to in a drop down box in one of those steps - just make sure you add it to the one that you named your TC. Then click to the finish and click UPDATE. Let it finish the update - you shoul dsee green light son both the TC and Extreme HARDWARE - not necessarily in the airport utility. Also it is a good idea to to to the menu bar on top where the WiFi icon is and manually select your network in case you get bumped off while the TC is updating itself after you ckicl update - this happened ot me and it wouldnt complete the update and took me forever to figure out it needs internet connection to complete the update screen.
next make sure you RESTART your comp. This I guess will make all changes basically go into effect as you cycle it up. When you are up and running you should see your WiFi connect as your TC and NOT your Express. Also go back into airport utility and see if you ahve both items listed in left column - they too should have a greenlight. If they do you should be set.
I did this because I wanted to steam my iTunes files that I have on my TC to stream to iTunes via my network. The Express part, as you know, is what allows the streaming. So make sure you plug your stereo cable into the Express audio port. Then go to iTunes and on the bottom you will notice a new little drop down box - make sure to select Express so it can wireless stream (in iTunes prefs there is a pref you must turn on also to allow iTunes to see remote speakers.
Ive simplified this a little since I am not at home but this is the gist. In a prefect worl you should be able to easily have this work. I did so I know it does at least work if not anything else. You just have to make sure you get the steps correct and have everyhing plugge din where they should be...
G'luck

Link Airport Express to an AirPort Time Capsule to use Airplay?

I am thinking about getting an 2GB AirPort Time Capsule. I use the Airplay feature on my Airport Express that is not part of the AirPort Time Capsule and that is the only reason I have not replaced the Airport Express with the Airport Time Capsule. Has anyone had any experience in setting up a these two units to do what they do together? Any potential problems linking these two units together?

If your intent is to use the new Time Capsule as your "main" Internet router, and then, use the Express for iTunes streaming this can be done without any real issues.
Please check out the following Apple Support article on how to configure an AirPort Express for iTunes.

Using Airport Express as Ethernet Access for Network Audio Receiver

Hello,
I have a quick question.
I recently bought a Onkyo CR-N755 Network receiver.
I would like to take advantage of the network radio functions, but am running into a problem.
I created an "Internet Sharing" set-up so that my macMini shared it's wi-fi signal over Ethernet, but it seems that this creates a new network as the receiver shows that it has IP address 192.168.2.3, where as everything else in the house is on 192.168.1.xxx. The receiver was able to access internet radio, but I could not find it with the controller app on my iphone, presumably because it was on a different network.
I think that the easiest solution would be to buy an Airport express and Connect the receiver to it by LAN.
In order to do this, would I set up the express as a bridge, create a new network with the same settings as the Extreme, or would I have to extend the network? I have read that bridging reduces bandwidth, so I would prefer not to do that if possible.
So can (and how do) I go...
Airport Extreme --wireless-- Airport Express --Ethernet-- CR-N755 while still keeping full bandwidt for the 3 ipads, 2 iphones, 2 wifi macs, appleTV, and numerous connected gaming systems that I, my wife, and 3 children use?
Thanks for any help you can offer.

In order to do this, would I set up the express as a bridge, create a new network with the same settings as the Extreme,
This option would require a permanent wired Ethernet connection between the AirPort Extreme and AirPort Express. This will provide full bandwidth over the entire network.
or would I have to extend the network
This setting would be used if you plan to connect the AirPort Express to the AirPort Extreme wirelessly. There will be some unavoidable loss of bandwidth over the network with this type of setup.....approximately 30-50%, depending on a number of factors.

Renamed Airport Express with the Airport utility, but iTunes shows old name

I renamed my two Airport Expresses using the Airport Express utility because I have moved them in the house and the old names don't make sense anymore. In the AirPort Express utility, I can see the new names. However, iTunes (and Apple Remote on the iPhone) do not recognize these new names, they are still showing the old names. How can I get these devices to recognize the new names?

Actually I have solved my own problem. I hadn't realized that the Airport Utility has essentially two names for each Airport. There is the name of the device as the Airport Utility sees it, and then a different name called the iTunes Speaker name (look under manual setup in the Music area). This latter is the name that appears in iTunes. As soon as I changed this, iTunes recognized the new name.

Can't see Airport Express unit, nor Airport Express Setup in my Network Settings

I can see my Airport Express in the Airport Express Utility App, lights are all green, but I can't see the unit, nor see the Airport Express Setup section inside my Network Settings. This is the case when trying to find the WiFi signal from 3 MacBookPros, as well as my iPad and iPhone (all running latest OS versions). I've been through the screenshots on line about how easy this is supposed to be to set up, but I cannot see the Express units at all. Oh, and I've downloaded the firmware updates and recycled the unit. No change. Bad Unit?

Do you want the Express to create a wireless network?
How did you configure the Express to connect to the Internet, and how are you connecting to the Internet now?
Here are the instructions: http://manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2 nd_gen_setup_guide.pdf
Let me know the page where you're getting stuck or where things aren't making sense.

Problem with airport express extending wifi from extreme

My setup is an airport extreme wired to the internet with two iMacs connected by wire and an airport express to extend wifi from the extreme to the further parts of my house. When originally installed about a year ago this arrangement worked perfectly, but I noticed a few weeks ago that neither my iphone, ipad, nor my MBP 13" is connecting to the aitport express anymore and the network extension is not working as intended.
Last night I investigated the isue and found that the express is connected wirelessly to my extreme because when I wired my MBP to the express and turned off the wireless connection it could still reach the internet. But, even with the express sitting plugged in next to my iPhone I could not get it to connect to the express - it always uses the extreme and while I'm in range there is no problem. The problem is that my house is old and the wals tend to cause problems with reception and I can't get wifi in the garden and some parts of the house.
I have the express and the extreme configured to allow access only by the client macs that I have provided and it looks like the two devices share this information when they are in extend mode (but not sure about that). When I set up the system I added the aitports mac addresses to the approved list in the access control screen, which seemed to be necessary then though I removed them (the airport mac addresses) fromt he list last night to see what effect this had and biefly the airport did connect to my MBP. But after returning it to its location where it usually is I have not been able to reconnect to it.
In brief; I have an airport express extending an airport extreme wifi, it used to work, but now all wifi clients will only connect to the master. I have a suspicion that a recent airport update has caused this (both airports are up-to-date) but can't be sure. I have the express correctly configured to extend the wifi of the extreme as it was originally working.
One thing I have noticed - I had the express set to use a fixed IP by setting 'static' in the internet screen - this is not the current setting (it's reverted to DHCP) and I cannot force it to update to and remain set to static.
Does anyone know how I can restore the correct functioning of the express as an extension of the wifi network?
Thanks
Damon

Perform the Factory Default Reset one more time. Hold the reset button until the amber light has been blinking rapidly for 8-10 seconds before you release the reset button
Run the setup wizard, and wait for screen similar to this to appear, then click on Other Options:
Select the Add to an existing network option, then click Next and follow the prompts.
If you are still having difficulty, try running the setup utility on an iPhone or iPad, since Yosemite has a number of bugs in the setup process.

New to wireless Cant get airport express to join airport extreme network

Similar Messages

Maybe you are looking for