New Toshiba Sattelite L750-10F audio freezes in place for a second then returns to normal

I recently bought this notbook and the audio constantly freezes and makes a squealing noise for a second or two then returns to normal. Any suggestions?

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region. If it's a European model, you could check the Toshiba Europe forums.
- Peter

Similar Messages

BB Curve tried 2 new batteries won't charge - battery icon flashes yellow for few seconds then shows a black plug

BB Curve 9360. Please help.
My 6 month old battery stopped taking a charge. Had left to charge overnight from the mains and phone was dead in morning. Wouldn't turn on or take a charge.
Had a spare battery from before and tried this. Charged to 25% and then showed battery icon with black plug and wouldn't take any more. If unplug and re-plug, shows yellow flash as if charging for a few seconds and then shows black plug. 25% charge runs down very quickly.
Bought a new battery. Exactly same experience. Sometimes gets between 5 - 25% charge but mostly is completely dead and not enough power to get beyond red flashing indicator.
Tried on and off. Tried taking out battery (many times!). Tried taking battery out while charging, waiting 30 seconds and then replacing battery (many times). Tried 3 other chargers, both from mains and from USB.
Have left it plugged in for hours even when showing black plug or just empty red battery - nothing. Just dies completely and hard to get enough power to get started again.
Left it unplugged and without battery for 2 days. Plugged into mains, got yellow flash and then black plug. Every time got black plug would unplug and re-plug to get yellow flashing back. Got it to 80% that time. But now gone back to only reaches 5% or won't take a charge and just red batterys sometimes with black plug or just empty, red flashing indicator.
Plugged into BB desktop manager to back up and checked for software updates. No updates available.
Only thing I can think is mini USB slot on BB is broken and need a new phone. Any ideas of anything else to try before bite the bullet??? Thank you!!

SaitoChikara wrote:
The number on the front of the battery is C-M2. It has a yellow label.
Wrong battery!
You need the CS-2, blue
http://www.amazon.com/BlackBerry-CS-2-Original-Li-Ion-Battery/dp/B0030T0UGW
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I purchased a new album and downloaded. When I play the first song only plays for 15 seconds then skips to the next song. Rest of album is fine.How do I correct this?

After purchasing a new album I found that 1st song only plays for 15 seconds then skips to next song. The rest of album is fine. How do I correct this?

Try Deleting it from your device, then download again from purchase history.
Hope this helps
PJRS

I recently bought the new Iphone 4S on the Bell network. I subscribe to visual voicemail, and when I get a voicemail I can listen to them but when I go to delete them it freezes the screen for a second or two and goes back to the homescreen.

I recently bought the new Iphone 4S on the Bell network. I subscribe to visual voicemail, and when I get a voicemail I can listen to them but when I go to delete them it freezes the screen for a second or two and goes back to the homescreen. Anyone else having this problem? I've called Belland they're clueless about this, and Apple support doesnt seem to know much about it either.

I was mislead as well. It turns out that visual voicemail is only partially supported by Bell. You can only playback voicemail. It doesn't show the caller ID either. You still have to call your VM in order to delete messages (which kinda defeats the purpose). According to Bell tech support they're "working on it" but I wouldn't hold my breath.

Some pictures in I-Photo seem to be corrupted. When I click on them, the photo comes up for a second, then the picture turns black with a white fuzzy circle inside it and what looks like an explanation mark. Some older, some newer, no common thread.

Some pictures in I-Photo seem to be corrupted. When I click on them, they come up for a second, then turn black with a white circle in the middle and what looks like an explanation mark. There does not seem to be any rhyme or reason to the photos that are a problem, some older ones, some newer, some albums have none, some albums have a lot.
Thanks,
Mark

time to time (when I have a chance), I will go to Finder, bring up ALL Images and start going through them to label them (before I put a label on them, they are simply listed as 123 jpg, 124 jpg etc.).
You're damaging the Library doing that, and that's the cause of your problem.
Never, ever, ever use the All Images search and work on items in yoyr iPhoto Library. They must only be accessed via the iPhoto window.
Restroe from abck up or try rebuild the Library:
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Next: You need to learn how to use iPhoto. There's no need to be dragging things to the desktop:
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491

Gaming apps freezes for few seconds , then resumes by itself or crashes sometimes ,after upgrading to iOS 8.3 on iphone 6

Gaming apps freezes for few seconds , then resumes by itself or crashes sometimes ,after upgrading to iOS 8.3 on iphone 6

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

I'm trying to play this new movie i bought with my macbook but every time i put the movie in it makes a noise and only stays there for 6 seconds then ejects itself how can i fix this problem?

I'm trying to play this new movie i bought with my macbook but every time i put the movie in it makes a noise and only stays there for 6 seconds then ejects itself how can i fix this problem?

Restart your phone,hold the home button and the off button down till the apple symbol comes up. If that doesnt fix it , you need to do a restore in itunes by connecting to itunes , click on your phones name to the left, then click restore in the center of the screen and restore from backup.

I did the recent update on my ipad 7.0.4 and now it keeps freezing up and can not use it. Tried reboot and works for a second then freezes right up again. Anyone else have this issue or know a fix?

I did the recent update on my ipad 7.0.4 and now it keeps freezing up and can not use it. Tried reboot and works for a second then freezes right up again. Anyone else have this issue or know a fix?

Madmonkey,
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Gaylefromnewhope,
Seems like you tried this all ready and it didn't help.
Next might be to reset all settings.
Settings > General > Reset > Reset all Settings
Note that when you do this you will not lose data but you will have to enter all passwords again.
If that doesn't help you might tries a restore of your iPad using iTunes on the computer you normall sync with. Do a backup and save all data first. Or
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Bought new charger: Says it charging for a second then goes away.

I just got a new charger for my laptop after my last one broke and I plug it in and it says it is charging for a second then the charging icon goes away like its not working anymore? I have no idea what to do because I am sure the same will happen if I bought another charger.

Hi MSginobili20,
Welcome to the HP Forums! Was the original charger doing the same thing as the new one? It could be the battery that is causing the problem. Start with a Hard Reset and if that doesn't work then we will run a hardware test on the battery. For that I will need your operating system and your product number, please.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Dreamweaver (CS 6 12.2) freezes while saving for 1 second

After the last Update Dreamweaver freezes for one second (with blue Spinner) while saving files. I cant do something, until the spinner disappears.
Why does saving a textfile take so long in the new version? Is this a bug? If yes: Is it possible to install older versions of Dreamweaver again? I have a CC Subscription.

Not sure why that would happen. I don't see the same thing here. You could try uninstalling and reinstalling. IIRC, you should get 13.0 again on a fresh install.
You can also have DWCS6 and DWCC installed at the same time (they just can't be used at the same time) if you are a subscriber. You can follow the instructions here to get it: http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

Macbook Pro freezes, shuts off for 10 seconds, and then returns to normal

My 13.3" Macbook Pro has this issue of shutting off for 10 seconds and then turns back on to normal. Usually it happens whenever I wake the laptop with the lid open, whenever I open the lid "too fast" from clam shell sleep, and whenever I reopen the lid after when I realized that I needed to check something else. Every time I start using the Macbook Pro from these situations, everything works fine for about 20 seconds and then suddenly everything freezes and shuts off temporarily. Then after about 10 seconds, everything turns back on again. I do not know why this occurs, but I had this issue the 3rd week I purchased this. Is this a normal thing or is this an issue with possibly the motherboard?

take a look at this topic, maybe will help:
http://discussions.apple.com/thread.jspa?threadID=2420192&tstart=15

New radio connect WLC for 60 second then reconnect

I have a 5508 with sw 7.0.98, i have 30 3500 ap conected inn local mode. When we connect a 1142ap on a remote location the radio connect the controller download sw stay there for about 40-90 sec, the reconect. On a other remote site against the same controller, is everything ok.
Log
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
*Aug 17 08:05:20.997: %WIDS-6-DISABLED: IDS Signature is removed and disabled.
*Aug 17 08:05:20.998: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 17 08:05:30.998: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 17 08:05:31.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.160.10 peer_port: 5246
*Aug 17 08:05:31.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Aug 17 08:05:31.890: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.160.10 peer_port: 5246
*Aug 17 08:05:31.891: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.160.10
*Aug 17 08:05:31.891: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 17 08:05:32.052: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Aug 17 08:05:32.195: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Aug 17 08:05:32.203: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
*Aug 17 08:05:32.212: %LWAPP-3-CLIENTEVENTLOG: OfficeExtend Localssid saved in AP flash
*Aug 17 08:05:32.382: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller H1-WLC01-R132
*Aug 17 08:05:32.402: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Aug 17 08:05:32.411: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Aug 17 08:05:32.436: %LWAPP-3-CLIENTEVENTLOG: Switching to Connected mode
*Aug 17 08:05:32.437: %LWAPP-3-CLIENTEVENTLOG: SSID Statnett_Guest added to the slot[0]
*Aug 17 08:05:32.452: %DOT11-6-DFS_SCAN_START: DFS: Scanning frequency 5680 MHz for 60 seconds.
*Aug 17 08:05:32.461: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Aug 17 08:05:32.461: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Aug 17 08:05:32.462: %LWAPP-3-CLIENTEVENTLOG: SSID Statnett_Ansatt added to the slot[0]
*Aug 17 08:05:32.601: %LWAPP-3-CLIENTEVENTLOG: SSID Statnett-VPN added to the slot[0]
*Aug 17 08:05:32.626: %LWAPP-3-CLIENTEVENTLOG: SSID Statnett_Guest added to the slot[1]
*Aug 17 08:05:32.642: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Aug 17 08:05:32.646: %LWAPP-3-CLIENTEVENTLOG: SSID Statnett_Ansatt added to the slot[1]
*Aug 17 08:05:32.686: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Aug 17 08:05:32.702: %DOT11-6-DFS_SCAN_START: DFS: Scanning frequency 5680 MHz for 60 seconds.
*Aug 17 08:05:32.703: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Aug 17 08:05:34.077: %LWAPP-3-CLIENTEVENTLOG: SSID Statnett-VPN added to the slot[1]
*Aug 17 08:05:34.261: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Aug 17 08:05:34.277: %DOT11-6-DFS_SCAN_START: DFS: Scanning frequency 5680 MHz for 60 seconds.
*Aug 17 08:05:34.286: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Aug 17 08:05:34.287: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Aug 17 08:05:34.303: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Aug 17 08:05:34.388: %WIDS-6-ENABLED: IDS Signature is loaded and enabled
*Aug 17 08:06:34.642: %DOT11-6-DFS_SCAN_COMPLETE: DFS scan complete on frequency 5680 MHz
*Aug 17 08:06:50.970: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_ECHO_REQUEST ., 3)
*Aug 17 08:06:50.971: %LWAPP-3-CLIENTEVENTLOG: Switching to Standalone mode
*Aug 17 08:06:50.971: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Aug 17 08:06:50.971: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.160.10:5246

Hi
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
It seems that we have found the cause of the problem, communication from 150.X.X.X is being NAT by some faulty rule in the Firewall here in Oslo.
Thanks for the help

My camera only stays on for a second then shuts off. I have the new iPad with retina display

My new iPads camera shuts off a second after I turn it on, what can I do ?

Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

I am having trouble with a LaCie 526 monitor working with my new Mac Pro. When I boot up, I see the sign-in screen for a second, then it disappears, reappears with some of the screen pixelated and the spinning beach ball -- and then freezes. Any thoughts

The LaCie is connected via DVI to thunderbolt adapter. It had been working, and then when I switched off the computer and restarted several days later, I see the signon screen flash quickly, followed by nothing, followed by the signon screen and spinning beach ball and it simply freezes. Any thoughts?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Can record audio for 10 seconds then stops

I have just put a new mobo in my agp G4 and the audio in jack seems to have a problem . I can get it to work but for only 10 seconds at a time. It will record but then stop and start again in 10 seconds. The audio out works fine no problem with that.
I've never had his happen before. Is there a fix for this?
thanks
Tony B
G4 power mac 1GHz w/sonnet upgrade Mac OS X (10.3.9)

Had to reinstall the os and that fixed the problem.

New Toshiba Sattelite L750-10F audio freezes in place for a second then returns to normal

Similar Messages

Maybe you are looking for