New TP creation fails

Hi All,
Just I am trying to create new TP.
I tried following ways
1. Just enter name of TP and finish the flow and validate it
2. Provide Name,Capabilities,Transport details,etc.. and validate
in both the cases I am getting following error
An error occurred during validation.
1.Error -: AIP-16001: The model validation engine failed due to an internal system error.
2.Error -: AIP-16001: The model validation engine failed due to an internal system error.
due to above problem I couldn't create and validate the agreement
Regards
Praveen

Hi,
I clearly understand the problem now
When ever TP is being added Communication capability under Custom doc with Generic Exchnage protocol. We are getting above error
I tried with AS2 protocol , this time we dont get any problem.

Similar Messages

The timesheet creation failed, because of problems with the project I server or with data validation

Hi,
One of my user is facing issue in creating new time sheet,
"The time sheet creation failed, because of problems with the project server or with data validations".
This issue is coming to only few members out of 10000 members.
Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
Many thanks in advance.

I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
Ben Howard [MVP] | web |
blog | book

When trying to start my Windows server 2008 R2 Data Center, I am getting "ramdisk device creation failed due to insufficient memory",

I have the following:-
VMWare workstation version 9 , with windows server 2008 R2 data center installed.
- I have installed the windows 2008 R2 inside the VM using an iso image.
- The host is windows 7.
I use to work well with the VM, but after adding a new VM to the same workstation . I start getting the following error when starting my old VM
ramdisk device creation failed sue to insufficient memory.
And on the windows boot manger screen they mentioned to :-
inset my windows installation dis and restart my PC.
click “repair your computer”
but not sure if this will fix the problem , baring in mind that the RAM assigned to the VM
is 24 GB & 80 GB hard disk.
The error is
Link.
so can any one advice what is causing this error?
Thanks

You might start by checking the RAM.
http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation failed

There's anyone ever get error like this?
[oradev@ebs bin]$ ./adcfgclone.pl dbTier
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
                     Copyright (c) 2011 Oracle Corporation
                        Redwood Shores, California, USA
                        Oracle E-Business Suite Rapid Clone
                                 Version 12.2
                      adcfgclone Version 120.63.12020000.7.1202010.2
Enter the APPS password :
Running:
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc5.jar oracle.apps.ad.context.CloneContext -e /u01/DEV/11.2.0/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_21933.lst -stage /u01/DEV/11.2.0/appsutil/clone 2> /tmp/adcfgclone_21933.err; echo $? > /tmp/adcfgclone_21933.res
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Provide the values required for creation of the new Database Context file.
Target System Hostname (virtual or normal) [ebs] :
Target Instance is RAC (y/n) [n] :
Target System Database SID : DEV
Target System Base Directory : /u01/DEV
Target System utl_file_dir Directory List : usr/tmp
RC-00213: Warning: The path specified must be the absolute path
Target System utl_file_dir Directory List : /usr/tmp
Number of DATA_TOP's on the Target System [1] :
Target System DATA_TOP Directory 1 [/apps/DEV/data] : /u01/DEV/data
Target System RDBMS ORACLE_HOME Directory [/u01/DEV/11.2.0] :
Do you want to preserve the Display [null] (y/n) : n
Target System Display [ebs:0.0] :
Do you want the target system to have the same port values as the source system (y/n) [y] ? : n
Target System Port Pool [0-99] : 0
Checking the port pool 0
RC-50221: Warning: Port Pool 0 is not free. Please check logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for conflicts.
Target System Port Pool [0-99] : 0
Checking the port pool 0
done: Port Pool 0 is free
Report file located at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Complete port information available at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Creating the new Database Context file from :
/u01/DEV/11.2.0/appsutil/template/adxdbctx.tmp
The new database context file has been created :
/u01/DEV/11.2.0/appsutil/DEV_ebs.xml
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Check Clone Context logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for details.
Running Rapid Clone with command:
Running:
perl /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl java=/u01/DEV/11.2.0/appsutil/clone/bin/../jre mode=apply stage=/u01/DEV/11.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/DEV/11.2.0/appsutil/DEV_ebs.xml showProgress contextValidated=true
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Beginning database tier Apply - Sun Mar 29 11:35:27 2015
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/u01/DEV/11.2.0/oui -classpath /u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc6.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/ewt3.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/share.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/srvm.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojmisc.jar   oracle.apps.ad.clone.ApplyDBTier -e /u01/DEV/11.2.0/appsutil/DEV_ebs.xml -stage /u01/DEV/11.2.0/appsutil/clone   -showProgress
APPS Password : Log file located at /u01/DEV/11.2.0/appsutil/log/DEV_ebs/ApplyDBTier_03291135.log
\     50% completed       RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
Sun Mar 29 11:46:03 2015
ERROR: Failed to execute /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl
Please check logfile.
[oradev@ebs bin]$

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C")
Please check - $ env | grep LC
If its set to LC_CTYPE = UTF-8 then unset or set it to blank value i.e. export LC_CTYPE =
Please see - ODA: oakcli command failed with perl: warning: Setting locale failed. (Doc ID 1526079.1)
-Kj

Tree creation failed on node: pcd:portal_content/...

Hi out there,
after patching our EP 7 from SPS 10 to SPS 13 we have the following error:
In the portal content directory there are some folders which cannot be
expanded anymore. The following error message appears: "Could not load
or refresh node Tree creation failed on node: pcd:portal_content/..."
I have found out that this is always caused by an inconsistent role
which is located in the folder I'd like to expand (or in a subfolder
of it).
It seems that this error has already been occuring in earlier SPs and / or releases. Has anyone found a solution to it?!?
Thanx for your support and best regards
Juergen Kuechle.

Hi
Restart the server it solve ur problem
The problem is caused by a missing "ADD" notification for imported folder objects. If the package contains new folder objects , the caches on other cluster nodes are not synchronized for these folders. If the package contains a complete folder hierarchy with other PCD objects (like iViews, pages, roles, ...) under a folder, and this folder object is contained in the package and imported before the objects under the folder, the complete hierarchy is not synchronized in the cluster.
Release the PCD cache on all cluster nodes after importing an EPA file containing folder objects
Create separate transport packages for the folder objects and import them after the transport packages containing the (regular) objects under these folders
Check SAP NOTE 991599
Regards
Krishna.

BO Polestar XI 3.1 - Index Creation Failed

Hi,
I am using BO Polestar XI 3.1 with a universe on top of BOE XI 3.1, and for some reason I canu2019t index a new space I created.
When I click on the u201Cindexu201D of the relevant space I get the error of u201CIndex Creation Failedu201D
Here is the part in the log, Please assist.
2010-01-24 12:25:11,364 - Navigation index creation failed: cd4ead8d-1658-4746-a346-0f642a2e1d94, 2010-01-24_12.25.09.692, null
java.lang.NullPointerException
     at com.businessobjects.datadiscovery.search.business.FactTableBuilder.writeIndexData(Unknown Source)
     at com.businessobjects.datadiscovery.search.business.FactTableBuilder.createFactTable(Unknown Source)
     at com.businessobjects.datadiscovery.search.business.ExplorationIndexesBuilder.createIndexes(Unknown Source)
     at com.businessobjects.datadiscovery.search.commands.async.CreateNavigationIndexCommand.run(Unknown Source)
     at com.businessobjects.datadiscovery.executor.impl.Executor$Task.run(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
     at java.lang.Thread.run(Thread.java:619)
DoronS

just find out that i have some toolbar that use the same cerdentials...

Cluster Creation Failed with Ambari AppManager

Hi,
I am getting this error when creating cluster
(cluster create --name hdp --distro HDP-1.3.2 --appManager Ambari --networkName Hadoop_NW)
serengeti>appmanager list
NAME DESCRIPTION TYPE URL
Default Default application manager Default
ambari AmbariServer Ambari http://10.6.55.239:8080
==========================
It seems that agent on the host is not able to connect to the server but the problem is the Ambari Server is not located at localhost:8080 how can i change it to ambari server's address.
Running setup agent script...
==========================
{'exitstatus': 1, 'log': "Host registration aborted. Ambari Agent host cannot reach Ambari Server 'localhost:8080'. Please check the network connectivity between the Ambari Agent host and the Ambari Server"}
Connection to node1.hadooptest.com closed.
SSH command execution finished
host=node1.hadooptest.com, exitcode=1
ERROR: Bootstrap of host node1.hadooptest.com fails because previous action finished with non-zero exit code (1)
ERROR MESSAGE: tcgetattr: Invalid argument
Connection to node1.hadooptest.com closed.
STDOUT: {'exitstatus': 1, 'log': "Host registration aborted. Ambari Agent host cannot reach Ambari Server 'localhost:8080'. Please check the network connectivity between the Ambari Agent host and the Ambari Server"}
Connection to node1.hadooptest.com closed.

Hi Qing,
Thanks for the solution its solved the earlier problem but now i got a new one. According to the error Failed to start ping port listener of:[Errno 98] Address already in use" This the only address on the lan .... what can be causing this issue ?
Mohsin
The failed nodes: 1
[NAME] hdp2-worker-0
[STATUS] VM Ready
[Error Message] ==========================
Copying common functions script...
==========================
scp /usr/lib/python2.6/site-packages/common_functions
host=node5.hadooptest.com, exitcode=0
==========================
Copying OS type check script...
==========================
scp /usr/lib/python2.6/site-packages/ambari_server/os_check_type.py
host=node5.hadooptest.com, exitcode=0
==========================
Running OS type check...
==========================
Cluster primary/cluster OS type is redhat6 and local/current OS type is redhat6
Connection to node5.hadooptest.com closed.
SSH command execution finished
host=node5.hadooptest.com, exitcode=0
==========================
Checking 'sudo' package on remote host...
==========================
sudo-1.8.6p3-12.el6.x86_64
Connection to node5.hadooptest.com closed.
SSH command execution finished
host=node5.hadooptest.com, exitcode=0
==========================
Copying repo file to 'tmp' folder...
==========================
scp /etc/yum.repos.d/ambari.repo
host=node5.hadooptest.com, exitcode=0
==========================
Moving file to repo dir...
==========================
Connection to node5.hadooptest.com closed.
SSH command execution finished
host=node5.hadooptest.com, exitcode=0
==========================
Copying setup script file...
==========================
scp /usr/lib/python2.6/site-packages/ambari_server/setupAgent.py
host=node5.hadooptest.com, exitcode=0
==========================
Running setup agent script...
==========================
Restarting ambari-agent
Verifying Python version compatibility...
Using python /usr/bin/python2.6
Found ambari-agent PID: 1682
Stopping ambari-agent
Removing PID file at /var/run/ambari-agent/ambari-agent.pid
ambari-agent successfully stopped
Verifying Python version compatibility...
Using python /usr/bin/python2.6
Checking for previously running Ambari Agent...
Starting ambari-agent
Verifying ambari-agent process status...
ERROR: ambari-agent start failed
Agent out at: /var/log/ambari-agent/ambari-agent.out
Agent log at: /var/log/ambari-agent/ambari-agent.log
('INFO 2015-04-01 06:19:59,137 HostCheckReportFileHandler.py:109 - Creating host check file at /var/lib/ambari-agent/data/hostcheck.result
INFO 2015-04-01 06:19:59,205 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:09,207 Heartbeat.py:76 - Sending heartbeat with response id: 1 and timestamp: 1427869209207. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:09,251 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:19,252 Heartbeat.py:76 - Sending heartbeat with response id: 2 and timestamp: 1427869219252. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:19,296 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:29,296 Heartbeat.py:76 - Sending heartbeat with response id: 3 and timestamp: 1427869229296. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:29,340 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:39,340 Heartbeat.py:76 - Sending heartbeat with response id: 4 and timestamp: 1427869239340. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:39,384 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:49,384 Heartbeat.py:76 - Sending heartbeat with response id: 5 and timestamp: 1427869249384. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:49,428 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:59,429 Heartbeat.py:76 - Sending heartbeat with response id: 6 and timestamp: 1427869259429. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:21:05,061 main.py:83 - loglevel=logging.INFO
INFO 2015-04-01 06:21:10,870 main.py:83 - loglevel=logging.INFO
INFO 2015-04-01 06:21:10,871 DataCleaner.py:36 - Data cleanup thread started
INFO 2015-04-01 06:21:10,875 DataCleaner.py:71 - Data cleanup started
INFO 2015-04-01 06:21:10,876 DataCleaner.py:73 - Data cleanup finished
ERROR 2015-04-01 06:21:10,877 PingPortListener.py:44 - Failed to start ping port listener of:[Errno 98] Address already in use
INFO 2015-04-01 06:21:10,877 PingPortListener.py:52 - Ping port listener killed
', None)
Connection to node5.hadooptest.com closed.
SSH command execution finished
host=node5.hadooptest.com, exitcode=255
ERROR: Bootstrap of host node5.hadooptest.com fails because previous action finished with non-zero exit code (255)
ERROR MESSAGE: tcgetattr: Invalid argument
Connection to node5.hadooptest.com closed.
STDOUT: Restarting ambari-agent
Verifying Python version compatibility...
Using python /usr/bin/python2.6
Found ambari-agent PID: 1682
Stopping ambari-agent
Removing PID file at /var/run/ambari-agent/ambari-agent.pid
ambari-agent successfully stopped
Verifying Python version compatibility...
Using python /usr/bin/python2.6
Checking for previously running Ambari Agent...
Starting ambari-agent
Verifying ambari-agent process status...
ERROR: ambari-agent start failed
Agent out at: /var/log/ambari-agent/ambari-agent.out
Agent log at: /var/log/ambari-agent/ambari-agent.log
('INFO 2015-04-01 06:19:59,137 HostCheckReportFileHandler.py:109 - Creating host check file at /var/lib/ambari-agent/data/hostcheck.result
INFO 2015-04-01 06:19:59,205 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:09,207 Heartbeat.py:76 - Sending heartbeat with response id: 1 and timestamp: 1427869209207. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:09,251 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:19,252 Heartbeat.py:76 - Sending heartbeat with response id: 2 and timestamp: 1427869219252. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:19,296 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:29,296 Heartbeat.py:76 - Sending heartbeat with response id: 3 and timestamp: 1427869229296. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:29,340 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:39,340 Heartbeat.py:76 - Sending heartbeat with response id: 4 and timestamp: 1427869239340. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:39,384 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:49,384 Heartbeat.py:76 - Sending heartbeat with response id: 5 and timestamp: 1427869249384. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:49,428 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:59,429 Heartbeat.py:76 - Sending heartbeat with response id: 6 and timestamp: 1427869259429. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:21:05,061 main.py:83 - loglevel=logging.INFO
INFO 2015-04-01 06:21:10,870 main.py:83 - loglevel=logging.INFO
INFO 2015-04-01 06:21:10,871 DataCleaner.py:36 - Data cleanup thread started
INFO 2015-04-01 06:21:10,875 DataCleaner.py:71 - Data cleanup started
INFO 2015-04-01 06:21:10,876 DataCleaner.py:73 - Data cleanup finished
ERROR 2015-04-01 06:21:10,877 PingPortListener.py:44 - Failed to start ping port listener of:[Errno 98] Address already in use
INFO 2015-04-01 06:21:10,877 PingPortListener.py:52 - Ping port listener killed
', None)
Connection to node5.hadooptest.com closed.
cluster hdp2 resume failed: Task execution failed: An exception happens when App_Manager (Ambari) creates the cluster: (hdp2). Creation fails..

Hyper-V 2012 R2 Cluster Creation Fails

I am trying to create a 2 Node Hyper-v 2012 R2 Cluster. The Cluster Validation passes with no errors or warnings but the the cluster creation fails.
The error is similar to
here .
In this case he solved it by joining the Nodes to a Windows 2012 Domain. We don't have that option in our environment.
In the System Logs Events 7024 The cluster service terminated... The cluster join operation failed, and 7031 Cluster Services Terminated unexpectedly.
Anyone have an idea?
Todd

Hi Todd,
For troubleshooting , please try to create a new OU then move cluster nodes computer to that new OU then block inheritance , restart the nodes .
After this try to use domain admin account logon the cluster nodes to build cluster again .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

ASM DG creation fails on sles11_x86_64 with 11gR1

Hi,
I have sles11x86_64 installed and using Veritas Volume manager raw disks for ASM but ASM dg creation fails with error mentioned below;
ls /dev/vx/rdsk/asmdg/asmvol
/dev/vx/rdsk/asmdg/asmvol
test:~ # ls -l /dev/vx/rdsk/asmdg/asmvol
crw-rw---- 1 oracle oinstall 199, 65533 Feb 26 12:08 /dev/vx/rdsk/asmdg/asmvol
test:~ # su - oracle
oracle@test:~> bash
oracle@test:~> export ORACLE_SID=+ASM
oracle@test:~> export ORACLE_HOME=/oracle/orabin/product/11.1.0/db_1
oracle@test:~> cd /oracle/orabin/product/11.1.0/db_1/bin
cat /etc/oratab
# This file is used by ORACLE utilities. It is created by root.sh
# and updated by the Database Configuration Assistant when creating
# a database.
# A colon, ':', is used as the field terminator. A new line terminates
# the entry. Lines beginning with a pound sign, '#', are comments.
# Entries are of the form:
# $ORACLE_SID:$ORACLE_HOME:<N|Y>:
# The first and second fields are the system identifier and home
# directory of the database respectively. The third filed indicates
# to the dbstart utility that the database should , "Y", or should not,
# "N", be brought up at system boot time.
# Multiple entries with the same $ORACLE_SID are not allowed.
+ASM:/oracle/orabin/product/11.1.0/db_1:N
test./sqlplus /nolog
SQL*Plus: Release 11.1.0.6.0 - Production on Fri Feb 26 12:25:32 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL> connect /as sysdba
Connected.
SQL> select name from v$asm_diskgroup;
no rows selected
SQL> select path from v$asm_disk;
PATH
/dev/vx/rdsk/asmdg/asmvol
SQL> create diskgroup asm_dg external redundancy disk '/dev/vx/rdsk/asmdg/asmvol';
create diskgroup asm_dg external redundancy disk '/dev/vx/rdsk/asmdg/asmvol'
ERROR at line 1:
ORA-15018: diskgroup cannot be created
ORA-15201: disk /dev/vx/rdsk/asmdg/asmvol contains a valid RDBMS file
SQL> select name from v$asm_diskgroup;
no rows selected
SQL> create diskgroup asm_dg external redundancy disk '/dev/vx/rdsk/asmdg/asmvol' -f;
create diskgroup asm_dg external redundancy disk '/dev/vx/rdsk/asmdg/asmvol' -f
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> create diskgroup asm_dg external redundancy disk '/dev/vx/rdsk/asmdg/asmvol' force;
create diskgroup asm_dg external redundancy disk '/dev/vx/rdsk/asmdg/asmvol' force
ERROR at line 1:
ORA-15018: diskgroup cannot be created
ORA-15080: synchronous I/O operation to a disk failed
ORA-15080: synchronous I/O operation to a disk failed
ORA-15080: synchronous I/O operation to a disk failed
ORA-15080: synchronous I/O operation to a disk failed
SQL> create diskgroup asm_dg external redundancy disk '/dev/vx/rdsk/asmdg/asmvol';
create diskgroup asm_dg external redundancy disk '/dev/vx/rdsk/asmdg/asmvol'
ERROR at line 1:
ORA-15018: diskgroup cannot be created
ORA-15201: disk /dev/vx/rdsk/asmdg/asmvol contains a valid RDBMS file
SQL> create diskgroup asm_dg external redundancy disk '/dev/vx/rdsk/asmdg/asmvol' force;
create diskgroup asm_dg external redundancy disk '/dev/vx/rdsk/asmdg/asmvol' force
ERROR at line 1:
ORA-15018: diskgroup cannot be created
ORA-15080: synchronous I/O operation to a disk failed
ORA-15080: synchronous I/O operation to a disk failed
ORA-15080: synchronous I/O operation to a disk failed
ORA-15080: synchronous I/O operation to a disk failed
SQL>
can some body help on this.
Also wanted to know the background process during ASM creation.
~Dhananjay
Edited by: user9075978 on Feb 26, 2010 4:18 AM

Force the partition table on the second node to be reread
# partprobe
Initialize all shared disks on one node (execute as user root)
dd if=/dev/zero of=/dev/sdc1 bs=1M count=10
dd if=/dev/zero of=/dev/sdc2 bs=1M count=10
dd if=/dev/zero of=/dev/sdc3 bs=1M count=10
dd if=/dev/zero of=/dev/sdc4 bs=1M count=10
dd if=/dev/zero of=/dev/sdd1 bs=1M count=10
dd if=/dev/zero of=/dev/sdd2 bs=1M count=10
dd if=/dev/zero of=/dev/sdd3 bs=1M count=10
dd if=/dev/zero of=/dev/sdd4 bs=1M count=10
dd if=/dev/zero of=/dev/sde1 bs=1M count=10
dd if=/dev/zero of=/dev/sde2 bs=1M count=10
dd if=/dev/zero of=/dev/sde3 bs=1M count=10
dd if=/dev/zero of=/dev/sde4 bs=1M count=10
dd if=/dev/zero of=/dev/sdf3 bs=1M count=10
dd if=/dev/zero of=/dev/sdf4 bs=1M count=10
Install ASM lib (execute as user root) on all cluster nodes
rpm -i /ptc/oms/asmlib/*
Configure ASM lib (set driver owner to oracle and group to dba) on all cluster nodes
/etc/init.d/oracleasm configure
Label ASM lib disks on one node (execute as user root)
/etc/init.d/oracleasm createdisk data01 /dev/sdc3
/etc/init.d/oracleasm createdisk data02 /dev/sdc4
/etc/init.d/oracleasm createdisk flash01 /dev/sdd3
/etc/init.d/oracleasm createdisk flash02 /dev/sdd4
/etc/init.d/oracleasm createdisk flash03 /dev/sde3
/etc/init.d/oracleasm createdisk flash04 /dev/sde4
/etc/init.d/oracleasm createdisk flash05 /dev/sdf3
/etc/init.d/oracleasm createdisk flash06 /dev/sdf4
Scan and list the disks on the other node (execute as user root)
/etc/init.d/oracleasm scandisks
/etc/init.d/oracleasm listdisks
Set up udev to configure block device permissions (as user root)
vi /etc/udev/permissions.d/49-oracle.permissions
sdc1:root:oinstall:0640
sdd1:root:oinstall:0640
# Voting
sdc2:crs:oinstall:0640
sdd2:crs:oinstall:0640
sde2:crs:oinstall:0640
# ASM spfile
sde1:asm:oinstall:0640
# ASM devices
sdc3:asm:oinstall:0640
sdc4:asm:oinstall:0640
sdd3:asm:oinstall:0640
sdd4:asm:oinstall:0640
sde3:asm:oinstall:0640
sde4:asm:oinstall:0640
sdf3:asm:oinstall:0640
sdf4:asm:oinstall:0640
Restart the udev service (execute as user root)
/sbin/udevstart

DPM 2012 R2 Online Protection - Online Recovery Point Creation Failed

Hi
We are moving from protecting our DPM server with another server to use an Azure Data Vault. 2 of the Protection Groups work fine, but the third - protecting a pair of Folders - fails. On the DPM MMC it shows Online recovery point creation
failed, and in the Event Log it shows -
Creation of online recovery points for D:\ on blah.blah.co.uk have failed. The last online recovery point creation failed for the following reason: (ID: 3188)
The operation attempted cannot be performed at this time because a backup or restore operation is currently running. (ID: 100049)
The DPM server is the only one conducting any backups. The target server is Win 2003 (for the moment).
Could anyone give me any pointers?
Thanks

Ok, nobody any more ideas?
The latest test involved 9.75GB on the protected server. I created the protection group and this was the outcome:
Replica volume: 15.98 GB allocated, 0 KB used | Recovery point volume: 3.70 GB allocated, 0 KB used
I then create a recovery point and then deleted all 9.75GB on the protected server. And did a full restore from DPM. It then gave following outcome:
Replica volume: 15.98 GB allocated, 9.85 GB used | Recovery point volume: 3.70 GB allocated, 654.86 MB used
Then after the creation of the first recovery point (sync + recovery point), I get this:
Replica volume: 15.98 GB allocated, 4.79 GB used | Recovery point volume: 13.70 GB allocated, 3.27 GB used
As you can see DPM took the 9.75GB and added it to the recovery volume. And strangly it took away half of the replica volume.
In addition I get 3 entried in my logs:
1) The used disk space on the computer running DPM for the recovery point volume of E:\ has exceeded the threshold value of 90% (DPM accounts 600 MB for internal usage in addition to free space available). If you do not allocate more disk space,
synchronization jobs may fail due to insufficient disk space. (ID: 3169)
2) Synchronization jobs for E:\ on ****** have failed. (ID: 3115)DPM has run out of free space on the recovery point volume and will fail synchronization for E:\ on ***** in order to prevent existing recovery points from being
deleted. (ID: 30195)
3) Creation of recovery points for E:\ on ****** have failed. The last recovery point creation failed for the following reason: (ID: 3114)DPM does not have sufficient storage space available on the recovery point volume to create
new recovery points. (ID: 214)
I hope someone can help me with this.
regards,
Maurice

Oracle 11g(11.1.1.6) SOA Domain creation failed

Hi ,
I am new to SOA .I have downloaded s/w from OTN (ORACLE) site .I have followed the quick start guide for installation .Everything went well
I have successfully installed oracle XE ,weblogic server,OEPE,RCU,OracleServiceBus.
When I try to create a Soa domain.I am getting following exception
Preparing...
Extracting Domain Contents...
Creating Domain Security Information...
Domain Creation Failed!
Domain Location: C:\demos\domains\SOAOSBPS4DevDomain
Reason: null
Exception:
Traceback (innermost last):
File "<iostream>", line 6, in ?
File "<iostream>", line 21, in cd
     at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
     at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
     at com.oracle.cie.domain.script.jython.WLScriptContext.cd(WLScriptContext.java:602)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: No nested element JDBCDriverParams is found
I have selected converttoRACMultiDatasource radio button
If I dont select that radion button Soa domain is getting created successfully
Can anyone please let me know what could be the problem
Thanks

Hi Vijay
I have checked the post and tested the same on my installation everything looks right
SQL> SELECT comp_id, comp_name, version, status, mrc_name, owner FROM schema_ver
sion_registry;
COMP_ID
COMP_NAME
VERSION STATUS MRC_NAME
OWNER
BAM
BAM Services
11.1.1.5.0 VALID DEV
DEV_ORABAM
COMP_ID
COMP_NAME
VERSION STATUS MRC_NAME
OWNER
MDS
Metadata Services
11.1.1.6.0 VALID DEV
DEV_MDS
COMP_ID
COMP_NAME
VERSION STATUS MRC_NAME
OWNER
ORASDPM
SDP Messaging
11.1.1.6.0 VALID DEV
DEV_ORASDPM
COMP_ID
COMP_NAME
VERSION STATUS MRC_NAME
OWNER
SOAINFRA
SOA Infrastructure Services
11.1.1.6.0 VALID DEV
DEV_SOAINFRA
can any body suggest what will be wrong.I have been on this issue since 2 weeks

Ksvcreate: Process(q001) creation failed

Hi Guys...
I run Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production on Solaris.
My database is experiencing a poor performance and when I check in the alert log I find this:
ksvcreate: Process(q001) creation failed
When I connect local my database hang on these:
SunOS:oracle:PRODDB /data1/app/oracle>sqlplus "/as sysdba";
SQL*Plus: Release 10.2.0.5.0 - Production on Wed Dec 1 06:10:18 2010
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
It takes time to connect as susch it is unusable.
How can I deal with this issue?
Please help!!!!!!!!!!!!!!!!!!!!!

user11979518 wrote:
I run Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production on Solaris.
My database is experiencing a poor performance and when I check in the alert log I find this:
ksvcreate: Process(q001) creation failedThere are a number of reasons why creating new processes can be slow and even fail. Most of these are due to lack of resources - for example having to swap out memory to create new virtual pages for the new process. If the resources are under strain, so too will be the creation of that process.
Basic things to check would be CPU and memory utilisation, and file system free space. Also the number of processes already running. Hopefully you are not running a 101 Oracle instances on that single server platform?

New Database Create Fails in Windows 2003

I have just installed Oracle9i on Windows 2003 Enterprise Edition without any problems (Server software -> New version of the Installer -> Patchset). Then I tried to create a new database with the DBCA (Database Creation Assistant). Although I can create the template without any problems, the db creation fails with a messagebox showing "CreateProcess: null -new -sid GTPORA -startmode m error=2". Then it gives me a ORA-12560 error. Can anyone assist here ?

I have installed 9.2.0.3 following the instructions - server; new installer; then the patchset. It looks like a problem of the Java environment that DBCA is using but I am not sure.

Database creation failed. review

Hi!
Thank Colin to help me.
I have used the oracle enterprise edition.
The log file shows:
- ERROR: The 'CREATE DATABASE' statement for the sid1 database
failed.
egrep failed to find 'ORA-' error in the file:
/u01/app/oracle/admin/sid1/create/crdbsid1.1st
Pls help me again.
Best Regards
null

Welkin (guest) wrote:
: Hi,
: When I install the oracle with install new product-Create DB
: objects, I received the error "Database creation failed. Please
: check log file". I don't know what go wrong. I have followed
the
: instruction of the installation of oracle on Redhat 5.2
: downloaded from htt://jordan.fortwayne.com/oracle. If anyone
can
: help me, please send me email. Thank you!
: Best Regards
: Welkin Fung
Thank you, it is use for only 8.0.5.0 Standard Edition but I
have Enterprise Edition I cannot create some file so What should
I do.
null

VM Creation fails

When I create a VM connected to my VM Network the VM Creation fails with the following error:
Error (10605)
The specified VLAN configuration is not valid.
Recommended Action
Ensure that the virtual network adapter is connected to a virtual switch, that a valid VLAN ID is specified, and then try the operation again.
The strange thing is that when I create a VM without NIC and then add the NIC with the same VM Network manually it just works and the VM is connected.
Can someone guide me in the right direction?

Hello,
It is not clear how you are creating new VMs or which version of SCVMM , we have similar issue while using App controller to deploy new VMs and the same was fixed after applying the hot fix from
http://support.microsoft.com/kb/2802159/en-us

New TP creation fails

Similar Messages

Maybe you are looking for