New Tracker Feature and "Available Time Range"
From the 6.0.0 release notes:
Earliest 15% of Tracking Data Is Not Currently Available for Querying
The earliest 15% of tracking data is not currently available for querying. However, the appliance retains the data, and the data will be available for querying after this issue has been resolved. [Defect ID: 39471]
IronPort will address this issue in a future release.
We are just fellow users here, but you can provide feedback to Apple here http://www.apple.com/feedback/iphone.html
Similar Messages
-
I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.
Have a look here > http://support.apple.com/kb/TS1646
-
I have a new MacBook Pro and every time I open Safari it locks up???
I have a new MacBook Pro and every time I open Safari it locks up???
Okay, then you have made a whole bunch of trouble for yourself. First, download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
and then you can manually remove as many bits of PSE as you can find. Not only the application itself, but also in hard drive>library>application support>adobe. And go to your username>library>preferences and delete everything there pertaining to PSE. That library is hidden. To see it, click the Go menu in the Finder and hold down the Option key and it will appear below the little house for your user account.
Then go here to download the installer and install it from scratch. You can never move an installed copy of PSE (except for the app store version):
Download Photoshop Elements products | 9, 8, 7 -
I have a new Airport Express and each time I open my laptop, I have to select my network. How to I configure to automatically go to my network>
ATOV,
Go to System Preferences...>Network>Wi-Fi>Advanced...>✓ "Remember networks this computer has joined," and click "OK." -
Cisco Identity Services Engine (ISE) Version 1.2: What's New in Features and Troubleshooting Options
With Ali Mohammed
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about what’s new in Cisco Identity Services Engine (ISE) Version 1.2 and to understand the new features and enhanced troubleshooting options with Cisco expert Ali Mohammed.
Cisco ISE can be deployed as an appliance or virtual machine to enforce security policy on all devices that attempt to gain access to network infrastructure. ISE 1.2 provides feature enrichment in terms of mobile device management, BYOD enhancements, and so on. It also performs noise suppression in log collection so customers have greater ability to store and analyze logs for a longer period.
Ali Mohammed is an escalation engineer with the Security Access and Mobility Product Group (SAMPG), providing support to all Cisco NAC and Cisco ISE installed base. Ali works on complicated recreations of customer issues and helps customers in resolving configuration, deployment, setup, and integration issues involving Cisco NAC and Cisco ISE products. Ali works on enhancing tools available in ISE/NAC that are required to help troubleshoot the product setup in customer environments. Ali has six and a half years of experience at Cisco and is CCIE certified in security (number 24130).
Remember to use the rating system to let Ali know if you have received an adequate response.
Because of the volume expected during this event, Ali might not be able to answer each question. Remember that you can continue the conversation on the Security community, sub-community shortly after the event. This event lasts through September 6, 2013. Visit this forum often to view responses to your questions and the questions of other community members.Hi Ali,
We currently have a two-node deployment running 1.1.3.124, as depicted in diagram:
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_010.html#ID89
Question 1:
After step 1 is done, node B becomes the new primary node.
What's the license impact at that stage, when the license is mainly tied to node A, the previous primary PAN?
Step 3 says to obtain a new license that's tied to both node A & node B, as if it's implying an issue would arise, if we leave node B as the primary PAN, instead of reverting back to node A.
=========
Question 2:
When step 1 is completed, node B runs 1.2, while node A runs 1.1.3.124.
Do both nodes still function as PSN nodes, and can service end users at that point? (before we proceed to step 2)
Both nodes are behind our ACE load balancer, and I'm trying to confirm the behavior during the upgrade, to determine when to take each node out of the load balancing serverfarm, to keep the service up and avoid an outage.
===========
Question 3:
According to the upgrade guide, we're supposed to perform a config backup from PAN & MnT nodes.
Is the config backup used only when we need to rollback from 1.2 to 1.1.3, or can it be used to restore config on 1.2?
It also says to record customizations & alert settings because after the upgrade to 1.2, these settings would change, and we would need to re-configure them.
Is this correct? That's a lot of screen shots we'll need to take; is there any way to avoid this?
It says: "
Disable services such as Guest, Profiler, Device Onboarding, and so on before upgrade and enable them after upgrade. Otherwise, you must add the guest users who are lost, and devices must be profiled and onboarded again."
Exactly how do you disable services? Disable all the authorization policies?
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_01.html#reference_4EFE5E15B9854A648C9EF18D492B9105
==================
Question 4:
The 1.1 user guide says the maximum number of nodes in a node group was 4.
The 1.2 guide now says the maximum is 10.
Is there a hard limit on how many nodes can be in a node group?
We currently don't use node group, due to the lack of multicast support on the ACE-20.
Is it a big deal not to have one?
http://www.cisco.com/en/US/customer/docs/security/ise/1.2/user_guide/ise_dis_deploy.html#wp1230118
thanks,
Kevin -
Q: new language features and JVM 1.4
I just finished reading Joshua Bloch's article on new Java language feature and am looking forward to their introduction.
Will programs compiled using the new features (generics, enhanced for, autoboxing, enums, static imports, and metadata) still run under a JVM 1.4?
I understand that a program that uses new gizmos from Swing, etc. will NOT run, but how about these language features?
Thanks, RalphObjects you would like to use in the new for loop syntax must be >instances of the Iterable interface which will be added to the >java.lang package. The Collection interface will extend Iterable. This >will allow arbitrary type to be used in the new for loop without
having to extends Collection. ah ok, why is this needed over doing plain syntactical transformations at compile-time e.g.
for( o : myarray ){
code
goes to
for(int i=0; i<myarray.length; i++){
Object o = myarray<i>;
code
or
for( o : myCollection ){
code
goes to
for(Iterator i = myCollection.iterator(); i.hasNext(); ){
Object o = i.next();
code
(I don't see why typing the element holder couldn't be automated too?)
asjf -
Installing a new hard drive and using Time Machine to Restore system
I just upgraded a Macbook (2006) hard drive and had problems importing the Time Machine backup. The problem was that the initial install discs were for Tiger, which did not support Time Machine. After numerous attempts at a work-around I solved this problem the following way:
I connected the 2006 Macbook (with new hard drive) to a newer Macbook (with Firewire port) - one with install discs for Leopard (which supports Time Machine).
I launched the newer Macbook with the install disc (#1)
I connected the two Macbook via firewire cable.
I launched the 2006 (new hard drive) Macbook in the Target Disc mode.
I connected the USB external hard drive containing the Tme Machine data to a USB port in the newer Macbook.
Next I went to the Utilities Menu on the Macbook (operating from the Install Disc) and selected Time Machine. I followed the prompts to match the source and destination. The process worked fine.
The above assumes that a new hard drive is properly formatted using Disc Utility per Apple's guidance prior to the Time Machine restoration described above.
Cheers.
BillBill,
No, the glass is half full!! In this case, we (collectively) have three things to brighten our day:
1) That I was mistaken, and that your usage is completely legitimate. I definitely prefer this to what was inherent in my erroneous assumption, and I do not mind being wrong (not in the slightest).
2) That we can be clever enough to overcome obstacles, then go out of our way to share our newfound knowledge with others. More specifically, that you have done so.
3) That we are willing to police ourselves, if and when one of us might go astray. Even if I was wrong in this case, isn't it nice to know I am willing scold someone for being less than honorable?
Perhaps my greatest mistake was the assumption that, if you had the proper disks at one time, you would still have them, or would have said so in your initial post. My apologies. Technically speaking, the media for a given OS should always be somewhere in your possession when running that OS. In practice, however, I strongly believe that some "wiggle room" exists, guided by common sense. In this case, I believe that the fact that you purchased said media gives you a pass, regardless of whether or not you know off the top of your head where it is.
There. Are you still saddened?
Scott -
Individual track start and end times: Fade in & out?
I can set start & end times for individual tracks.
Can I also fade in & out?You can set start and stop times for individual tracks using Get Info>>Options tab.
iTunes Preferences>>Playback tab has a crossfade option that you could check out to see if it does what you want on fading in and out. -
I have used Mozilla Firefox for 3 years with no issues. I have now purchased a new laptop (Samsung) and cannot access my regular sites (like Windows Live or my banking, most everything) without getting a Yellow waring arrow stating that I am going into an encrypted page and third parties are able to see what I am doing. I am very concerned if others are having access. My bank says it has nothing to do with them...it is an https secure site. I still have major concerns, please help!
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
I purchased a Macbook Air on 01st October and from day 3 every time I close the cover and reopen it later the mouse pointer is frozen
I updated the operating system today but no change.
Any one else having this annoying problem. Seems like a software glitch to me.http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359 -
New (missing) Features and iChat/PhotoBooth effects
According to http://www.apple.com/macosx/refinements/enhancements-refinements.html
AirPort menu signal strength.
The AirPort item in the menu bar now includes signal strength for all available wireless networks, so you can see which access point has the best signal before selecting it.
I'm not seeing this. Anyone else seeing this? Anyone know the fix?
Also, I have More iChat Effects 1.2 installed. See http://www.apple.com/downloads/macosx/email_chat/moreichateffects.html
Photo Booth crashes when attempting to view these effects in the effects browser. Anybody else seeing this or know a fix?jephwhy wrote:
Also, I have More iChat Effects 1.2 installed. See http://www.apple.com/downloads/macosx/email_chat/moreichateffects.html
Photo Booth crashes when attempting to view these effects in the effects browser. Anybody else seeing this or know a fix?
I had a similar problem when I upgraded from Tiger to Snow Leopard (and also upgraded to iLife 09). For me, the solution was to run iChat and Photo Booth in 32-bit mode instead of 64-bit mode.
To do this, go to the Applications folder, select the icon for iChat, go to the menu bar and select File->Get Info. (Alternatively use the shortcut ][-I or "right click" the icon). Check the box for "Open in 32 bit mode". Repeat for Photo Booth.
(note- I have also posted the above text to another thread in the iSight forum to improve the chances of it being found by others seeking a solution) -
New timing features and smoothcam
I manipulated the speed of a clip with the new retiming tools in FCP. Some of the footage is a little shaky but I can't add the smoothcam filter to the clip. The clip highlights if I drop the filter on top of it but nothing happens beyond that. Any ideas?
Hi, Mcastanheira, and welcome to the Community,
Whilst Skype may not be providing for such a facility, I trust you are researching third-party developer software add-on's which might.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
I bought a new MacBook Pro and every time I open Adobe Photoshop Elements 9 quit unexpectedly.
Has any one had trouble opening Photoshop Elements 9 with the new MacBook Pro?
Okay, then you have made a whole bunch of trouble for yourself. First, download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
and then you can manually remove as many bits of PSE as you can find. Not only the application itself, but also in hard drive>library>application support>adobe. And go to your username>library>preferences and delete everything there pertaining to PSE. That library is hidden. To see it, click the Go menu in the Finder and hold down the Option key and it will appear below the little house for your user account.
Then go here to download the installer and install it from scratch. You can never move an installed copy of PSE (except for the app store version):
Download Photoshop Elements products | 9, 8, 7 -
What do I do when the App Store wants me to
Use my old email and I don't remember the password even though I set up a new apple ID accountContent acquired from iTunes is permanently tied to the Apple ID that it was acquired with.
If that is not your Apple ID, delete the content in question.
If it is your Apple ID, reset the password and stop using the new Apple ID. -
Its a brand new 2 gb ipod shuffle and has never been connected to a computer before.
It would be interesting if it could "talk" to iTunes on a different host computer..if it couldn't it sounds like it would be some type of hardware problem, and would involve a warranty replacement of the new device.....wish I had a better answer...
Maybe you are looking for
-
I need to re-install the PhotoshopCC on the new computer.
I need to re-install the PhotoshopCC on the new computer. I do not deactivated the software PhotoshopCC on the previous computer did not appear because the deactivation link. Now he no longer appears in Creative Clould desktop for me to reinstall the
-
HT204406 cant find file.. itunes.msi from old itunes ..wont update or uninstall
i can not remove or update itunes...missing file itunes.msi
-
In the Create tutorial, the Text object I created is not shown as a sub-element of the roundrect in
The tutorial shows it like this but what I get is this
-
How to CHANGE formulas in Process Chain decision?
Hi, I'm working on a BI 2004s system with SP10. I have created a Process Chain with a decision. This decision should check the first day in the month. In that case the chain should follow another path. After creating a formula in the decision process
-
Message no. B1003""Could not determine recipients for message type ACPJMM""
Hi All, While posting GR in MIGO, an error is showing. I am attaching the error description. ""Could not determine recipients for message type ACPJMM"" Message no. B1003 Diagnosis An IDoc of message type ACPJMM was passed to the ALE layer, but the t