New type of call failed!
guys ,i'm new to this forum ...and i checked around to see if there was a thread to this kind of problem.
first off, its not the usual 3GS problem where the first time it says 'failed' and the second time it 'connects' the call.
mine is an iphone 3G 8gig ios 4.1[jailbroke and unlocked], it says 'call failed' and i can try try and try but it wont connect no matter what i do .
yes, i did try the clock-toggle-thingy and also the toggle-callwaiting-thingy.
i am in an are where the reception is excellent. the sim worked fine on any other handset.
p.s: i had this problem on ios 4.0 too. didnt have it on ios 4.1 till now. and its back again!
It's not that no one here doesn't want to help you, the terms of use of this forum do not permit us to help you. Use Google...type jailbroken iphone won't work...that's about all we can suggest.
ITS NOT MY FAULT
Of course its your fault, you're the one that hacked the phone.
Similar Messages
-
I have a brand new iphone 4s unlocked version from singapore and I am experiencing constant network fluctuations on my iphone , no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/bars searching etc... Ifeel miserable after trying out all the options changed multiple sims, tried multiple carriers, restored the phone back and have set-up as new device but the problem does not get solved... its is so frustrating that after investing on a world's most expensive phone you cannot enjoy the calling features which the phone offers which is the main thing you own the phone for.. Rest of the things are working.. The funniest part I am not able to make calls or receive calls but can access the internet.. I have tried every possible thing and really very frustrated with this iphone of mine...I hope the problem gets solved.. would anyone have any solutions to this problem.. Does it mean one should never update software as I hear that after updating to IOS.5.1 the problem has started coming and same has been with there.... Apple says its a hardware failure which is very difficult to digest as sometimes I get 5 bars and able to make and receive calls but 95% of the time I am unable to. If anyone has any solution I will be very happy if he or share can share the same. Many thanks. its so disgusting to experience this on top of this apple does not support global warranty for the phone as you need to go to the country from where you bought the phone for replacement.. Truly sad state of affairs.. very very very dissappointing.
Have a look at this it might help
http://support.apple.com/kb/TS4148 -
IPhone 4S Siri Will No Longer Voice Dial Contacts - Always Call Failed
I am not exactly sure when this started (5.0.1?), but when I ask Siri to dial someone in my contacts, Siri recognizes the request, proceeds to Dial the number and no matter which contact I try, I get an immediate "CALL FAILED" and then the iPhone immediately locks. I have restored the iPhone as new, Reset Network Settings, etc. to no avail. If I turn Siri off from Settings, the phone will revert to the previous Voice Control that was present in previous iPhones and Voice Calls are successful. Only when trying to use Siri do all voice initiated calls fail. And it is 100% consistent in the failure. This does not appear to be a Siri network issue, as all Siri other Siri requests work and are speedy. Co-workers with the 4S are also experiencing the same issue, so it does not appear to be specific to just my iPhone. Can anyone else confirm? Thanks.
OK, so i have tracked it down to a single AT&T Cell Tower location in my instance, but it also just so happens to be at my office, which means I am affected by it all day. What is happening is that at this particular location, the AT&T tower is misconfigured or experiencing some type of technical issue, resulting in the inability of the cell tower to handle simultaneous voice and data. Siri uses data to match the contacts, names etc and hands off to the Phone dialer, which immediately experiences a call failure as a result of the 3G Data still being in use by Siri. You can verify simultaneous voice and data connectivity by placing a voice call and then attempting to use 3G data (you must not be using WiFi to determine if this is a problem with the Cell network). While in a voice call, launch the Speedtest.net Mobile Speed Test app. You will clearly see that 3G data services have all but ceased if this is your problem. End the Voice Call and run the Speedtest.net Mobile Speed Test again and 3G data will work fine.
I have reported the problem via AT&T's Mark the Spot App numerous times and had my colleagues do the same and called AT&T Wireless customer service to no avail. They simply refuse to acknowledge the issue is on their end. I personally know at least 5 other iPhone 4S users in my office who are experiencing the same issue and the results can be consistently recreated on all of their devices. And again, once they leave the office in the afternoon, all of their services return to normal and they can again make and place Voice initiated phone calls without the dreaded Call Failed. Thanks AT&T. -
Remote procedure call failed and did not execute response after changing contents
Hey Hey!
I have reviewed the other posts related to this issue but have not found a solution.
I have done myself quite a mischief and hope someone here can help me out!
I'm running an old ACER laptop with Windows 7. This PC belonged to an old colleague and therefore all of the folders and user names were still under his name, so I decided to try to change them all to my name. The main issue was the USER folder which had
the locked symbol next to it but it wasn't locked at all. I googled how to delete this folder and one bright spark suggested I create a new folder with my name, copy all of the folders from the other 'locked' user's folder into my folder, and then delete the
old user's folder.
That was fine. All seemed well. When I tried to delete the old folder the computer sat around thinking saying it was 'moving' but not doing anything. So, I cancelled the operation in the Task Manager. When I attempted to open any folder from the start menu
or desktop or task bar I was presented with a bunch of numbers and letters and the message "REMOTE PROCEDURE CALL FAILED AND DID NOT EXECUTE."
I quickly googled the message realising I'd made a major error and the first response was to type in services.msc or something to that effect, so I typed that into the Start Menu search bar and hit enter and nothing came up. So, I tried again, but now I
couldn't type anything into the search bar, I could not even select any programs from the Start Menu.
So, I can't access the Start Menu, search bar, or any of the folders unless I open uTorrent, select open containing folder, and from there I can access what I need.
I'm too afraid to reboot the PC. I can't locate my copy of Windows 7 anywhere. I'm freaking out!!
Before I pour my lowly student wage into getting a professional to fix it, could someone please offer some suggestions??
Greatly appreciated in advance.
Paris, Texas.Hi,
Based on your description, for this question is more related to NetQueryDisplayInformation() API, in order to get better help, we may ask for suggestions in the following MSDN forum.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Besides, we can try to use a script to get all domain users. Regarding this point, the following script can be referred to as reference.
How to list all active directory users in a particular domain using PowerShell
https://gallery.technet.microsoft.com/office/How-to-list-all-active-0d9be7ce
In addition, for scripts, we can also ask for help in the following forum.
The Official Scripting Guys Forum
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Best regards
Frank Shen -
Remote Procedure Call Failed - Verifying Account prior to establishing PIN as sign in option
PC Settings / Accounts / Sign in options / PIN / Verify Account info / : I enter my Microsoft Account password and receive the following message:
"Remote procedure call failed"
Cannot cancel - screen keeps reappearing.
I have successfully established a sign-in PIN for my Win 8.1 desktop. The above problem is occurring only on my Win 8.1 laptop.Hi,
Sorry for my late reply.
Regarding the issue, please ensure that RPC service is start.
If it stops, I suggest you perform the following step to start it.
1.Press Win+R, and type regedit, then press enter.
2.Please navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\RpcSs and
locate Start registry key
Double click on Start and edit the value:
Change Startup type :
Automatic - 2
Manual - 3
Disabled - 4
Automatic (Delayed Start) - 2
Note: When you change to Automatic (Delayed Start) a new key DelayedAutostart is created with value 1.
When you change to Automatic from Automatic (Delayed Start), DelayedAutostart change value to 0.
If it cannot start, please refer to the following article to test it.
"Could not start the Remote Procedure Call (RPC) Service. Error 1058" error message when you manually start the Remote Procedure Call service
http://support.microsoft.com/kb/838428
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
XI AF API call failed. Module exception: Java Mapping
Hi Experts,
I have faced a typical error for one of my interface. The Scenario is SOAP to SOAP and we are performing SOAP Lookup before sending the data to Target web service. We are using one Java Mapping 'FileIns_lookupLoad.java --- com/fi/' and performing the SOAP Lookup from within the code. In the Lookup Communication channel we are using 'Axis' as message protocol and passing couple of values through Module Key parameters. We have same ESR and ID objects in Development, Quality and Production (as per Version ID and History).
Now the problem is Lookup is failing only in Development but Quality and Production is working fine. I have replaced Quality CC URL with the development WSDL URL, but that worked fine. That means Development Web Service is good. We are getting the below error in Dev:
<SAP:Stack>StreamTransformationException triggered by application mapping program com/fi/FileIns_lookupLoad; Look Up Failed</SAP:Stack>
Trace : *
<Trace level="1"
type="T"> Some Thing Wrong in LookUpError when calling an adapter by using the communication channel CC_IN_SOAP_GEInsuranceLoadLookup1 (Party: , Service: BusService_GE, Object ID: 4214805c52893ef9b0b3f0ef0902fe9e) XI AF API call failed. Module exception: 'while trying to invoke the method org.apache.axis.types.URI.toString() of an object returned from com.sap.xi.XI.Message._30.QualifiedName.getNamespace()'. Cause Exception: 'while trying to invoke the method org.apache.axis.types.URI.toString() of an object returned from com.sap.xi.XI.Message._30.QualifiedName.getNamespace()'. </Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
<Trace level="1" type="T">Java mapping com/fi/FileIns_lookupLoad has thrown a StreamTransformationException. Thrown: com.sap.aii.mapping.api.StreamTransformationException: Look Up Failed at com.fi.FileIns_lookupLoad.execute(FileIns_lookupLoad.java:282) at com.fi.FileIns_lookupLoad.transform(FileIns_lookupLoad.java:74) at com.sap.aii.ib.server.mapping.execution.JavaMapping.executeStep(JavaMapping.java:92) at com.sap.aii.ib.server.mapping.execution.Mapping.execute(Mapping.java:60) at com.sap.aii.ib.server.mapping.execution.SequenceMapping.executeStep.................................................
................................................................................<Trace level="1" type="T">Application mapping program com/fi/FileIns_lookupLoad throws a stream transformation exception: Look Up Failed Thrown: com.sap.aii.ib.core.mapping.execution.ApplicationException: Application mapping program com/fi/FileIns_lookupLoad throws a stream transformation exception: Look Up Failed at com.sap.aii.ib.server.mapping.execution.JavaMapping.executeStep(JavaMapping.java:95) at com.sap.aii.ib.server.mapping.execution.Mapping.execute(Mapping.java:60) at com.sap.aii.ib.server.mapping.execution.SequenceMapping.executeStep(SequenceMapping.java:40) at com.sap.aii.ib.server.mapping.execution.Mapping.execute
I have already checked with Basis and as per them JDK and Java versions are identical in Dev, QAS and Prod. It seems something is wrong with 'XI AF API' which we are calling from the channel. If we totally ignore Lookup process and send direct data, it is working fine. Target CC is also using Axis.
Sequence in CC: afreq ->xireq ->wssec2 ->xires ->afres
For any more information please let me know.
Thanks,
Nabendu.Hi Anupam,
The Java Mapping code is same in Dev , QAS and Prod. Also the versions of the JAR is same.
Please find the code below.
package com.fi;
import java.util.HashMap;
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mapping.api.AbstractTransformation;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.MappingTrace;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.DynamicConfiguration;
import com.sap.aii.mapping.api.DynamicConfigurationKey;
import com.sap.aii.mapping.api.TransformationInput;
import com.sap.aii.mapping.api.TransformationOutput;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.*;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.ParserConfigurationException;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.OutputKeys;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.*;
import org.w3c.dom.views.AbstractView;
import org.xml.sax.SAXException;
import java.io.ByteArrayInputStream;
import com.sap.aii.mapping.lookup.*;
/*import com.sap.aii.utilxi.hmis.server.HmisEnvironment.Accessor;
//import com.sap.aii.utilxi.lock.api.LockServiceException;
//import com.pmintl.pppimes.RFCLookup.javamapping.*;
//import java.io.FileInputStream;
//import java.io.FileOutputStream;*/
import java.text.DateFormat;
import java.text.SimpleDateFormat;
//import java.text.ParseException;
import java.util.Date;
import java.io.*;
public class FileIns_lookupLoad extends AbstractTransformation{
private Map param = null;
private AbstractTrace trace = getTrace();
String senderService = null;
String inParamChannel = null;
String inParamBusService = null;
//3. Each JAVA Mapping using program 7.1 API must implement the method
// transform(TransformationInput in, TransformationOutput out)
// as oppose to execute Method in earlier version.
public void transform(TransformationInput arg0, TransformationOutput arg1) throws StreamTransformationException {
// TODO Auto-generated method stub
//4. An info message is added to trace. An instance of trace of object is obtained by calling
// the getTrace method of class AbstractTransformation
inParamChannel = arg0.getInputParameters().getString("COMM_CHANNEL");
inParamBusService = arg0.getInputParameters().getString("BUS_SERVICE");
getTrace().addInfo("Input Parameter: " + inParamChannel);
getTrace().addInfo("Input Parameter: " + inParamBusService);
this.execute(arg0.getInputPayload().getInputStream(),
arg1.getOutputPayload().getOutputStream());
//5. Input payload is obtained by using arg0.getInputPayload().getInputStream()
* @param args
public static void main(String[] args) {
// TODO Auto-generated method stub
public void execute(InputStream in, OutputStream out)
throws StreamTransformationException {
// TODO Auto-generated method stub
try
//Get The Trace
// trace = (AbstractTrace)param.get(StreamTransformationConstants.MAPPING_TRACE );
trace = getTrace();
getTrace().addInfo("Java Mapping Started");
DocumentBuilderFactory ifactory = DocumentBuilderFactory.newInstance();
DocumentBuilder ibuilder = ifactory.newDocumentBuilder();
Document IDoc = ibuilder.parse(in);
Document TDoc = ibuilder.newDocument();
String mrnVal = "";
trace.addInfo("Preparing Target Doc");
Element message = TDoc.createElementNS("urn:Medtronic.com:CATS_Patient_Transactions","n1:Mt_Insurance");
Node tRoot = TDoc.appendChild(message);
//trace.addInfo(tRoot.getNodeName());
Element sRoot = (Element)IDoc.getFirstChild();
//trace.addInfo(sRoot.getNodeName());
NodeList nl = sRoot.getChildNodes();
// trace.addInfo("Len"+nl.getLength());
//// for(int i=0;i<nl.getLength();i++)
// Node n1 = TDoc.importNode(nl.item(i), true);
// trace.addInfo("Adding Child Nodes");
// trace.addInfo(nl.item(i).getNodeName());
// tRoot.appendChild(n1);
NodeList lmrn = sRoot.getElementsByTagName("Mrn");
if(lmrn != null)
Node n1 = TDoc.importNode(lmrn.item(0), true);
Element e1 = (Element)lmrn.item(0);
//trace.addInfo(e1.getNodeName());
mrnVal = e1.getTextContent();
tRoot.appendChild(n1);
NodeList lfsc = sRoot.getElementsByTagName("Fsc");
if(lfsc != null)
for(int i=0;i<lfsc.getLength();i++){
Element n1=TDoc.createElement(lfsc.item(i).getNodeName());
tRoot.appendChild(n1);
Node fieldch = TDoc.createElement("Fields");
n1.appendChild(fieldch);
NodeList chl = lfsc.item(i).getChildNodes();
trace.addInfo("len11"+chl.getLength());
for(int j=0;j<chl.getLength();j++){
if(!chl.item(j).getNodeName().equals("FscNumber")&&!chl.item(j).getNodeName().equals("Priority")){
if(chl.item(j).hasChildNodes()){
trace.addInfo(chl.item(j).getNodeName());
Element fscfield = TDoc.createElement("FSCField");
fieldch.appendChild(fscfield);
NodeList FUQl = chl.item(j).getChildNodes();
for(int p =0;p<FUQl.getLength();p++){
//trace.addInfo(" i: "+i+" J: "+j+" P: "+p);
if(FUQl.item(p).getNodeName().equals("FUQNumber")){
//Node tFUQ = TDoc.createElement("FUQNumber");
//tFUQ.setTextContent(FUQl.item(p).getTextContent());
fscfield.setAttribute("FUQNumber", FUQl.item(p).getTextContent());
if(FUQl.item(p).getNodeName().equals("Value")){
Node tVal = TDoc.createElement("Value");
tVal.setTextContent(FUQl.item(p).getTextContent());
fscfield.appendChild(tVal);
//Node tName = TDoc.createElement("Field");
//tName.setTextContent(chl.item(j).getNodeName());
fscfield.setAttribute("Field", chl.item(j).getNodeName());
// Node fuqch = chl.item(j).getFirstChild();
// Node valch = fuqch.getNextSibling();
// if(fuqch!=null){
// Node tFUQ = TDoc.createElement("FUQNumber");
// tFUQ.setTextContent(fuqch.getTextContent());
// fscfield.appendChild(tFUQ);
// if(valch!=null){
// Node tVal = TDoc.createElement("Value");
// tVal.setTextContent(valch.getTextContent());
// fscfield.appendChild(tVal);
// Node tName = TDoc.createElement("Filed");
// tName.setTextContent(chl.item(j).getNodeName());
// fscfield.appendChild(tName);
else{
//Node numch =TDoc.importNode(chl.item(j), true);
//Element e1 =(Element)n1;
if(chl.item(j).getNodeName().equals("FscNumber")){
n1.setAttribute("Number", chl.item(j).getTextContent());
if(chl.item(j).getNodeName().equals("Priority")){
n1.setAttribute("Priority", chl.item(j).getTextContent());
//tRoot.appendChild(lfsc.item(0));
// Element e1 = (Element)lfsc.item(0);
// trace.addInfo(e1.getNodeName());
// mrnVal = e1.getNodeValue();
/////Start of Look Up Code////
//Preparing Input String
String lookUpRequest = "<LoadPatientFullInsuranceDetail><Mrn>"+mrnVal+"</Mrn></LoadPatientFullInsuranceDetail>";
trace.addInfo("Request");
trace.addInfo(lookUpRequest);
SystemAccessor acc;
Channel channel;
Payload lookupResult;
try
channel = LookupService.getChannel(inParamBusService, inParamChannel);
trace.addInfo("Got the channel");
acc = LookupService.getSystemAccessor(channel);
trace.addInfo("Got The Channel and Accessor");
InputStream ist = new ByteArrayInputStream(lookUpRequest.getBytes());
XmlPayload payload = LookupService.getXmlPayload(ist);
if(acc != null){
trace.addInfo("Got The Channel and Accessor");
trace.addInfo("Executing The Webservice");
lookupResult = acc.call(payload);
trace.addInfo("End of Executing The Webservice");
trace.addInfo(lookupResult.toString());
if(lookUpRequest!=null){
trace.addInfo("Responce is not null");
InputStream rist = lookupResult.getContent();
Document lresDoc = ibuilder.parse(rist);
Node n1 = lresDoc.getFirstChild();
trace.addInfo(n1.getNodeName());
if(n1.getNodeName().endsWith("LoadPatientFullInsuranceDetailResponse"))
Node ch1 = n1.getFirstChild();
trace.addInfo(ch1.getNodeName());
NodeList lookupnl = ch1.getChildNodes();
//trace.add
for(int i=0;i<lookupnl.getLength();i++)
Node n2 = TDoc.importNode(lookupnl.item(i), true);
trace.addInfo("Adding Child Nodes");
trace.addInfo(lookupnl.item(i).getNodeName());
tRoot.appendChild(n2);
else{
throw new StreamTransformationException("Error in Look Up"+n1.getTextContent());
//while(ch1.hasChildNodes() && !ch1.getNodeName().equals("FSCS")){
else{
trace.addWarning("Responce is null");
throw new LookupException();
catch(LookupException le)
trace.addWarning("Some Thing Wrong in LookUp"+le.getMessage());
throw new StreamTransformationException("Look Up Failed");
Transformer transformer = TransformerFactory.newInstance().newTransformer();
// StreamResult reqResult = new StreamResult(new StringWriter());
DOMSource source = new DOMSource(TDoc);
Result result = new StreamResult(out);
transformer.transform(source,result);
catch(StreamTransformationException ste)
throw new StreamTransformationException(ste.getMessage());
catch(Exception e){
trace.addInfo(e.getMessage());
finally{ -
Outgoing to ISDN calls fail with cause 0x2C
Cisco 2821 with 4 E1 connected to PSTN. Most outgoing calls flow without any issues, but sometimes fails (debug isdn error shows "CCPMSG_OutCall: fails with cause 0x2C"). I see enough free timeslots in E1 at this time. This E1 using for outgoing calls only, incoming calls come via other E1.
Router configuration:
controller E1 0/1/1
framing NO-CRC4
pri-group timeslots 1-31
interface Serial0/1/1:15
no ip address
encapsulation hdlc
no logging event link-status
isdn switch-type primary-net5
isdn timer T303 120000
isdn incoming-voice voice
isdn map address .* plan isdn type national
isdn send-alerting
isdn negotiate-bchan resend-setup
isdn bchan-number-order ascending round-robin
isdn sending-complete
no isdn outgoing display-ie
trunk-group PSTN 10
no cdp enable"debug isdn q931 detailed" & "debug isdn error" show:
ISDN Se0/1/1:15 Q931d: Default type/plan 0x0 0x1 sw-type 18 Calling number 4242510458 isdn_map 0 mask 0x3022
ISDN Se0/1/1:15 Q931d: Calling plan/type unspecified in call_decode, so ignored.
ISDN Se0/1/1:15 Q931d: No call_decode, isdn default set
ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: Comparing 4242510458/.*, (regexp)
ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: overriding plan/type for 4242510458, isdn/unknown to isdn/national; Oct3a 0x81
ISDN Se0/1/1:15 Q931d: Default type/plan 0x0 0x1 sw-type 18 Called number 9262151 isdn_map 0 mask 0x3022
ISDN Se0/1/1:15 Q931d: Called plan/type unspecified in call_decode, so ignored.
ISDN Se0/1/1:15 Q931d: No call_decode, isdn default set
ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: Comparing 9262151/.*, (regexp)
ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: overriding plan/type for 9262151, isdn/unknown to isdn/national
ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: Comparing 4242510458/.*, (regexp)
ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: overriding plan/type for 4242510458, isdn/unknown to isdn/national
ISDN Se0/1/1:15 **ERROR**: CCPMSG_OutCall: fails with cause 0x2C
ISDN Se0/1/1:15 Q931d: L3IF_rx_L2_pak: received data
080285335A
ISDN Se0/1/1:15 Q931d: L3_Go: source 0x020A, event 0x005A, call id 0x0000, int id 0x0
ISDN Se0/1/1:15 Q931d: L3_Go: event 0x5A cr_len 2 cr 1331
ISDN Se0/1/1:15 Q931d: L3_Go: call_id 0x84C9 cr 0x533 state 19 event 0x5A ces 1
ISDN Se0/1/1:15 Q931d: L3_ProcessEvent: callref = 0x0533 RELEASE_COMP:U19_ReleaseComp(nlcb)
ISDN Se0/1/1:15 Q931d: L3_state_change: callref 0x0533 old RELEASE_REQUEST, new NULL_STATE -
Hi All,
I am trying to add a new task to a Tasks list called CATasks. The list was created via Visual Studio “Add > New Item > List” process and not by custom code. The code I am using to add a task is shown below.
What I have noticed is if I use my code to add a Task to a Task List created by Visual studio “Add > New Item > List” process, I get an error. Error message when adding an item:
Call failed. Error: An unexpected 'PrimitiveValue' node was found when reading from the JSON reader. A 'StartObject' node was expected.
But if I create the same list using custom code I don't get an error.
Am I missing something in my custom code or is this a bug?
I hope you can help.
CEStar
App.js Code:
function createItem() {
var call = jQuery.ajax({
url: _spPageContextInfo.webAbsoluteUrl + "/_api/Web/?$select=Title,CurrentUser/Id&$expand=CurrentUser/Id",
type: "GET",
dataType: "json",
headers: {
Accept: "application/json;odata=verbose"
call.done(function (data, textStatus, jqXHR) {
var userId = data.d.CurrentUser.Id;
addItem(userId);
call.fail(function (jqXHR, textStatus, errorThrown) {
failHandler(jqXHR, textStatus, errorThrown);
function addItem(userId) {
var due =
new Date();
due.setDate(due.getDate() + 7);
var call = jQuery.ajax({
url: _spPageContextInfo.webAbsoluteUrl + "/_api/Web/Lists/getByTitle('CATasks')/Items",
type: "POST",
data: JSON.stringify({
"__metadata": { type:
"SP.Data.CATasksListItem" },
Title: "Sample Task",
AssignedToId: userId,
DueDate: due
headers: {
Accept: "application/json;odata=verbose",
"Content-Type":
"application/json;odata=verbose",
"X-RequestDigest": jQuery("#__REQUESTDIGEST").val()
call.done(function (data, textStatus, jqXHR) {
var div = jQuery("#message");
div.text("Item added");
call.fail(function (jqXHR, textStatus, errorThrown) {
failHandler(jqXHR, textStatus, errorThrown);
function failHandler(jqXHR, textStatus, errorThrown) {
var response = JSON.parse(jqXHR.responseText);
var message = response ? response.error.message.value : textStatus;
alert("Call failed. Error: " + message);
Create List Custom Code:
function createList() {
var call = jQuery.ajax({
url: _spPageContextInfo.webAbsoluteUrl + "/_api/Web/Lists",
type: "POST",
data: JSON.stringify({
"__metadata": { type:
"SP.List" },
BaseTemplate: SP.ListTemplateType.tasks,
Title: "CATasks"
headers: {
Accept: "application/json;odata=verbose",
"Content-Type":
"application/json;odata=verbose",
"X-RequestDigest": jQuery("#__REQUESTDIGEST").val()
call.done(function (data, textStatus, jqXHR) {
var message = jQuery("#message");
message.text("List added");
call.fail(function (jqXHR, textStatus, errorThrown) {
var response = JSON.parse(jqXHR.responseText);
var message = response ? response.error.message.value : textStatus;
alert("Call failed. Error: " + message);Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support -
Log4j:ERROR setFile(null,true) call failed.
Hello
I have Log4j.properties
log4j.rootCategory = DEBUG, file ,ImportFileAppender , console
log4j.appender.stdout.threshold = ERROR
log4j.appender.stdout = org.apache.log4j.ConsoleAppender
log4j.appender.stdout.layout = org.apache.log4j.PatternLayout
log4j.appender.stdout.layout.ConversionPattern = %d{ABSOLUTE} %5p [%t] %c - %m%n
log4j.appender.file.threshold = DEBUG
log4j.appender.file.File = ${qtl.log.location}
log4j.appender.file.MaxFileSize = 10MB
log4j.appender.file.MaxBackupIndex = 10
log4j.appender.file = org.apache.log4j.RollingFileAppender
log4j.appender.file.layout = org.apache.log4j.PatternLayout
log4j.appender.file.layout.ConversionPattern =%-5p|%-80m|%d%n
log4j.appender.ImportFileAppender.threshold = DEBUG
log4j.appender.ImportFileAppender.File = ${qtl.log.import}
log4j.appender.ImportFileAppender = org.apache.log4j.RollingFileAppender
log4j.appender.ImportFileAppender.layout = org.apache.log4j.PatternLayout
log4j.appender.ImportFileAppender.layout.ConversionPattern = %-5p|%-80m|%d%n
and i am giving ${qtl.log.location} through java file like this
private static String LOG_4J_PROPERTY_FILE = "/src/com/impact/qtl12/commons/log4j.properties";
logFileName = "log-" + new SimpleDateFormat("yyyyMMdd-hhmm").format(new Date()) + ".log";
logFilePath = dirString + "\\" + logFileName;;
System.setProperty("qtl.log.location", logFilePath); //replacing ${qtl.log.location} by the logFilePath in log4j.properties String directory = System.getProperty("user.dir");
PropertyConfigurator.configure(directory + LOG_4J_PROPERTY_FILE);
when i run my program i get error of this type
log4j:ERROR setFile(null,true) call failed.
java.io.FileNotFoundException:
at java.io.FileOutputStream.openAppend(Native Method)
at java.io.FileOutputStream.<init>(Unknown Source)
at java.io.FileOutputStream.<init>(Unknown Source)
at org.apache.log4j.FileAppender.setFile(FileAppender.java:289)
at org.apache.log4j.RollingFileAppender.setFile(RollingFileAppender.java:165)
at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:163)
at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:256)
at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:132)
at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:96)
at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyConfigurator.java:654)
at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyConfigurator.java:612)
at org.apache.log4j.PropertyConfigurator.configureRootCategory(PropertyConfigurator.java:509)
at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:415)
at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:316)
at org.apache.log4j.PropertyConfigurator.configure(PropertyConfigurator.java:324)
at com.impact.qtl12.imports.UI.CSVFile.QTL.main(QTL.java:964)
log4j:ERROR setFile(null,true) call failed.
Edited by: Mayur Mitkari on Jan 2, 2013 12:53 AM
Edited by: Mayur Mitkari on Jan 2, 2013 12:54 AM
Edited by: Mayur Mitkari on Jan 2, 2013 12:55 AMMayur Mitkari wrote:
I checked it out the directory existsReally? You have a directory 'src' in the root of your filesystem?
/src/com/...EDIT: never mind, moving along, I missed a bit of code there... In my own defense, use \ formatting tags to make it slightly more inviting to read it. -
I can not make any skype calls on any type of plataform i use (windows 8, mac and android) in all of them i have uninstalled and reinstalled the latest versions and i still can't make any calls i have checked my internet and audio/video settings and everything seems fine but i keep getting the internal error message on mac and call failed one on windows i need help urgently since is theway i comunicate with my family.
Attachments:
Screenshot (1).png 41 KBOn both Mac Yosemite and Android 4.4.4 on my cell, I get either "Call failed" or "Call error." Using Skype 7.7 on a new Mac Mini and 5.3 on the cell. WiFi connection is FIOS. I cannot find any reason for this except application failure. Pretty outrageous in these modern times. It is consuming much time to resolve and, as you know, time is of the essence.
-
cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?
I recently bought a new HP computuer and uploaded Window 8.1. I then transfered photo files from old computer to new computer using a portable storage drive.
When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'. Photos are in jpeg format.
Please let me know what I can do to view photos?What program you use to view these photos? Choose another app to view these photos
for a test.
This issue only occurred when you view photo? What is the result if we connect the
portable storage drive to other computer (if possible)?
Run sfc/scannow to check and fix if there are some missing or corrupted system files.
Check the event viewer to see the detailed information of this issue.
Regards
Yolanda
TechNet Community Support -
Dropped calls and "Call failed" on edge
My experience has been the opposite from others on the forum with the new 2.0.2 software. I can get 3G in town and I can place and receive calls just fine. At home, I only have an edge connection with usually 2-3 bars. 9 out of 10 calls I try to make from home fail. I get the three beeps and "Call failed" message on the screen. Usually it is a split second after I hit the call button. It's not even trying to make the call. I have restored it, restarted, etc. and it still happens! I cannot make a phone call at all. This is my business phone, and it is affecting my response to clients. Anyone have any suggestions? I will probably go to the genius bar tomorrow, but if I don't have to go through the hassle, I won't.
tigerarch,
Does this happen in all locations, or just your home?
What does the AT&T coverage map show for your home?
I live in a moderate area, and AT&T's disclaimer on the coverage map says that Good and Moderate may not have in building coverage. Not only does my iPhone sometimes not pick up a signal or complete calls, the same applies to other AT&T phones there.
My home is also made of stucco, which along with brick and cement block, is one of the worst materials for blocking signals.
If this only happens in one location, I would recommend contact AT&T and see if they will open a ticket. The probably won't open a ticket if your coverage is listed as "Moderate"
Hope this helps,
Nathan C. -
I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee
try general>settings>reset>reset all settings and start up as an new phone.
-
Web services Connection_Operations.Logon call fails on Data Services 4.0
Hello,
We recently installed Data Services 4.0. We have a custom Java app which makes use of the web services interface. We had previously used Axis to generate the java class. With DS 4, it looks like the Logon method did change as it now requires the cms system and authentication. We manually updated the java classes to includes these, which has been our general approach in the past for newer releases. However DS 4 uses Axis2 and I'm not sure that this approach would work.
My problem is that the "Logon" call fails with very little details.
In viewing both the webadmin.log and WebService.log it only reports the following:
11/02/2011 18:42:17 [ SEVERE ] Logon failed. Error: null
I understand that I can control the logging detail . The Integrator Guide for DS 4.0, has the following instruction, yet there is no log4j.properties file on my system?
"To control the level of detail in the webadmin.log file, you must edit the log4j.properties file.
The properties file is located in:
LINK_DIR\ext\webserver\webapps\acta_web_admin\WEB-INF
To obtain a debug trace of events, change the log level from the default of INFO to DEBUG. For example,
log4j.rootLogger=DEBUG, A"
Any advise would be greatly appreciated
ThanksHello,
Unfortunately, stdout.log below doesn't show anything possibly due to some mis-configuaration of log4j.properties. In my previous post I requested info on which log4j.properties should be modified as the documentation in the DS 4.0 Integrator's guide mentions a none-existent path?
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
com.businessobjects.webpath.rebean3ws.Activator
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
null -
I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall). Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB). I'm seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then....
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
---------------------------------more troubleshooting--------------------------
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
TCP 10.x.x.x:53 0.0.0.0:0
LISTENING 1692
[DFSRs.exe]
TCP 10.x.x.x:54669
10.x.x.x:5722 TIME_WAIT 0
TCP 10.x.x.x:54673
10.x.x.x:5722 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64773
10.x.x.x:389 ESTABLISHED 1692
[DFSRs.exe]
TCP 10.x.x.x:64787
10.x.x.x:389 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64795
10.x.x.x:389 ESTABLISHED 2104
Receiving Member:
[DFSRs.exe]
TCP 10.x.x.x:56683
10.x.x.x:389 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:57625
10.x.x.x:54886 ESTABLISHED 2808
[DFSRs.exe]
TCP 10.x.x.x:61759
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61760
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61763
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61764
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61770
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61771
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61774
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61775
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61776
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61777
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61778
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61779
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61784
10.x.x.x:52757 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:63661
10.x.x.x:63781 ESTABLISHED 4880
------------------------------more troubleshooting--------------------------
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
- I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I'm seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR 957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
---------------------------------------more troubleshooting-----------------------------
I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried. Does anyone have any other suggestions? Maybe I need to look somewhere
else on the server side or firewall side?
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue.
Some other things I'm wondering:
-Could it be the speed of the NICs? Server A is a 2012 Server that has Hyper-V installed. NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout's cause the issue? From time to time I get a timeout but it's not as often as the events I'm seeing. I'm getting 53ms pings. The folder
is only 3 GB so it shouldn't take that long to replicate but it's been days. The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am. Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps. Server A is on a 5mb circuit and Server B is on a 10mb circuit.I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
It also says...
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:\info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
I'll see if I can find anything useful out, but a better solution would be most wonderful.
Maybe you are looking for
-
I can't update my Pages'9 4.3 and its not compatible with newer versions???
Hi I have had no problems with my Pages 4.3 which i installed a year ago, until the last month or 2. I have the app on my ipad but when i send pages docs from my ipad to my computer my computer tells me that i have an older version of pages and it wo
-
Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system
-
hi, is there any one who can tell me that in any organigation how can we check how many users in that company. i am not talking about here logged in user rather i am talking about the quantity of that users.
-
Dear experts, I have 2 questions related to co production orders please guide me its very urjent 1. In one of our plant we are using co productin orders, what is the use of co production orders other than normal production orders. 2.Whi
-
What is the use of ABC indicator in functional location segment.
Hi Expert, I want to know about ABC indicator in functional location segement actually, what is the use of indicators in master data? Regards, Ram Rathode