New unlocked iphone 3g won't connect to wireless network

I have a new unlocked iphone 3g.  I have tried unsuccessfully to connect this phone to my home wireless network.  I keep getting error message... "unable to join the network"  I cannot figure out why this is not working... all my other devices (ipad, itouch etc) are connecting to this home wireless network successfully but for some reason I cannot get this new iphone to work.  I have connected it to my itunes and still not working.... any suggestions??????  Thanks

Related topic here
http://discussions.apple.com/thread.jspa?threadID=1889677&tstart=0

Similar Messages

  • My Iphone 5 won't connect to a network or wifi

    My Iphone 5 won't connect to a network or wifi, I just got the phone less then a month ago.....It is driving me nuts and I don't know how to fix it!I

    Have you read through the user guide and taken basic troubleshooting steps?  What have you done so far to troubleshoot?

  • Hp C4580 printer won't connect to wireless network, but see network is available.

    I've sat through quite a few of the threads here with regard to photsmart C4580 printer not connecting to wireless network.
    My issues started with a cartridge issue, which I resolved with a new cartridge, but only after trying out different solution offered on HP forum.
    Now printer won't connect to my network which it has been connected to for over 2 years with no issues. The wireless network is working perfectly fine and I even printed out a HP photosmart C4500 series connectivity status and in this report printer can see the network I need to connect to.
    I've tried downloading various programs from Scan doctor to complete install of all HP programs and even tried installing printer from Windows 7 "add a printer", but none can see this printer.
    lastly I was hoping trying to locate IP address for printer which looks like it may help, but report says IP Address "not applicable".
    I believe printer, wireless network and PC are working correctly, this there a way to switch printer to online so it can be seen.
    Help would be great.

    Hello there! Welcome to the forums @Cushionman ,
    I noticed your post about the issues you are having with connecting the printer to your network. I am wanting to offer you my suggestion that might help you out!
    Click this link and then choose Windows 7, and "Solution two: Manually resolve the issue", and follow the steps from there: The Printer is Not Found During Wireless Network Installation in Windows
    Let me know the results
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • IMac G3 won't connect to wireless network

    We recently bought an Airport wireless card and adaptor, we fitted it into the G3 today and it won't connect to the network. After we type in the password this message appears " There was an error joining the AirPort network", when we go into system profile under "Wireless Card Locale". It says USA, we live in the UK could this be a problem? We bought the card via eBay from china.
    And if it helps the G3 is running OS X 10.3.2, we have an Airport Express base station and our other macs connect to it ok.

    Yes, it very well could. Different regions/countries have different rules regarding which radio frequencies are available for unlicensed use, such as wireless products. If you have a card for the US, and you're in the UK, they very well could be trying to use different frequency ranges and thus unable to connect.
    Of course another, simpler, possibility is that you selected the wrong kind of wireless encryption. You should be using at least WPA, WEP is about the same as no encryption at all. I don't recall if 10.3 was ever updated to support WPA2 or not. If it does, once you get things all sorted out, if your router also supports WPA2, that'd be your best bet.
    For the future, you might want to avoid buying things off ebay like that. I know that it's not exactly like you can just pop round to the nearest electronics store and pick up one of these things, but you're going to have to accept the possibility that you were sold the wrong part and that money is now gone. You're probably lucky the part wasn't some cheap counterfeit knockoff that caused some kind of internal damage when connected. There's a lot of enterprising ebay sellers in China who like to go dumpster diving at big manufacturing plants. Finding parts that were discarded for failing QA testing, and selling them on ebay to people who only care about finding the lowest possible price.

  • HT4623 my iphone 4S won't connect to my network.   I shut it off and turned on again, I took out the network and when I've put it back in it asks for password and then when i push join nothing happens

    My Iphone won't connect to my wifi , its the phone as everyone and everything else is connected to it. 
    Ive shut it off and turned it back on , when it asks for the password I put it in and push join but nothing happens.  

    Try resetting your network setting on your iPhone. Go to your Settings>General>Reset>Reset Network Settings. (this will delete any saved wi-fi passwords that are currently on the phone). If that doesn't resolve the issue. Try connecting the phone to your computer and doing a back up and restore, once it is restored set it up as a new iPhone (very important step) then test the issue. If it resolves the issue reconnect your phone and  then restore it from the back up you created earlier. Follow this article if you want to do the back up and restore.
    http://support.apple.com/kb/HT1766

  • My iPhone 4 won't connect to wifi networks?

    I've tried resetting my network settings many times and it still doesnt seem to work. I then tried resetting all settings, still nothing has changed.
    It usually turns blue with a tick once it's connected properly but now the wifi signal strength turns blue but the actual wifi router name doesn't and the blue tick doesnt appear.
    What else could I do now? Please help Also I'm trying to download iOS 7 so the software it new but obvioulsy without a wifi connection, it's not possible.

    Try updating your phone through iTunes on your computer.  You will need to make sure you have iTunes 11.1 installed

  • G4 (MDD) with AirPort Can't See/Won't Connect to Wireless Networks

    Hi all. I've seen topics/threads that get close to my question/problem, but not quite.
    I inherited a PowerMac G4 (MDD)/Dual 1 GHz/1.5 GB DDR SDRAM/running 10.3.9.
    I purchased a used original AirPort card from eBay, opened up the machine, and plugged it in. When I went to update the software (from a CD), my machine told me that it was up to date (though one HD is running OS9 and one running OSX -- so the software wouldn't install because the HD running OSX said it was up-to-date and the HD running 9 said it was impossible). The machine recognizes the card/shows it gray in the toolbar/says it has Firmware Version 8.70 in the System Profile.
    My problem is that the AirPort can't see any wireless networks 99% of the time, even though 3 (including mine) are in range all the time. I've seen my network only flicker into possibility a few times, and even though I've disabled all security measures on the wireless router (Linksys Wireless-G, Model WRT54G), it simply won't connect. One time in 3 hours it momentarily looked like it was going to connect, then said "out of range," then disappeared completely. It has seen 0 wireless networks for the past hour.
    I've read everything far and wide trying to solve this issue and am totally stuck. At first I thought I needed an antenna for the AirPort, but this is an internal card, so that doesn't seem right. I know the AirPort card (and not Extreme) is right because a) I don't have a FW800 port and b) the machine recognizes this card. Finally, I thought it may have had to do with the WPA security on the Linksys, but even with security disabled...nothing.
    I'm feeling very frustrated. Any advice?
    Thank you very much.

    Thanks, Tom. I did as you suggested, and the Max Signal under the Log is showing a red 12, which is terrible, yes? What, exactly, does this tell me? That this is simply a case of old technology (AirPort b) struggling to communicate with new technology (Linksys g) over a medium distance (Linksys is in next room, through wall)? If plugging straight into the ethernet were an option, I'd just do it. But I can't get my G4 onto the Internet without running cords down the hallway and through my TV room, which is an obvious eyesore.
    Is there a chance this AirPort card is only partly functional and I should return it? Or do I need to accept the fact that this G4 needs to either be moved closer to the Linksys router or be plugged in directly?
    Thank you.

  • Won't connect to wireless network but indicates full signal strength

    I just bought a new macbook pro last week and connected to my home's wireless internet immediately with no problems. Until this morning it was working fine. When i opened my computer and it woke from sleep it would no longer provide me with internet access. Both skype and safari won't work but my icon indicates that i have full signal strength and that i am in fact connected to my home network. I ran a diagnostic test and the result was that it "appeared to be connected" yet i still am not able to access the internet. When i plug an ethernet cable into my mac the internet works and all the other computers in the house (all non-macs) have wireless internet access.
    Thanks for any help!

    When i opened my computer and *it woke from sleep* it would no longer provide me with internet access.
    Sometimes a restart will correct network problems since you are getting the full bars and the diagnostic test confirms +"appeared to be connected".+
    Resetting an Apple portable's System Management Controller (SMC)
    Since your computer is new, check Software Update & make sure you have all the latest "network" updates for your model computer.
    Read the 2008 Macbook Pro forum to determine if there are any wireless network issues with your model computer - http://discussions.apple.com/category.jspa?categoryID=251

  • MacBook Pro won't connect to wireless network unless tilted

    Hi! My MacBook Pro occasionally has trouble connecting to the wireless network in my house, but that can usually be solved by turning Airport off and then back on. Today (very suddenly), Airport disconnected from my network and could not find it again. I tried restarting my MacBook Pro and router multiple times. Finally it was able to connect, but here's the thing: it only works if my MacBook is tilted at an angle. If I try to open a webpage while the MacBook is sitting normally on a flat surface, the page won't load. If I lift one side of the MacBook so that it's tilted at a 45 degree angle, the page will load. Once it's level again the internet will stop working and the Airport signal bars will turn gray.
    I've never come across a problem like this before. Everything was running fine this morning. It is so strange and I have no idea what to do! Help, please? Is my Airport dying? Is something loose inside? My MacBook Pro is about 4 years old.

    Delete your network from system preferences, network, advanced.
    re enter your network you wish to join
    If that fails then do a PRAM reset
    http://support.apple.com/kb/ht1379
    and a SMC reset
    http://support.apple.com/kb/HT3964
    Maybe something to do with the motion sensor
    if so try resetting the SMC

  • Iphone 4 will not connect to wireless network

    I have went to phone settings and connect to a network. The phone says known networks will be joined automatically. I clicked on my network, put in my passcode and it does nothing. I'm doing this to print pictures from my iphone 4 to my wireless printer.

        I believe being able to print wirelessly is the best invention ever! With that being said, are you using the Air Print on the iPhone?
    http://bit.ly/W3dasD
    Have you been able to get a WiFi connection on the phone?
    Tamara H.
    Follow us on Twitter @VZWSupport

  • Power Mac G3 Pismo with Airport wireless card in Mac OS X 10.4 won't connect to wireless network  with  newest Airport Extreme Base Station set at WPA Personal/WPA 2 Personal encryption.

    My Power Book G3 Pismo with an Airport wireless card  running Mac OS X 10.4.11 will not connect to my new Airport
    Extreme Base Station using WPA Personal/WPA 2 Person encryption.  The Airport firmware is version 9.52.  From
    posts I've read online at different places indicates the Airport card should support the WPA encryption.  Perhaps the problem
    is the Base Station is using a combination setting and the fault is in the base station?
    Thanks for any suggestions

    Perhaps an inexpensive usb wireless adapter would work as well?
    This is probably the simplest way to get the G3 connected to the wireless network.
    I'll have to read up on getting an express and using it as a wireless bridge as I am unfamiliar with the concept.
    The new AirPort Extreme is broadcasting a wireless signal.
    A new AirPort Express could be located close to the G3. The Express will pick up the wireless signal from the AirPort Extreme, then provide an Ethernet connection to the G3 though a short Ethernet cable. 
    This can work very well......IF.....you keep the G3 at a fixed location, since it will always be connected to the AriPort Express using an Ethernet cable.
    I do have an old Linksys Wireless G router.  I wonder if that would work?
    In theory, yes. But it would have to use much older WEP "security", which is easily cracked in minutes using free tools available on the Internet. So, anyone who really wanted to get on the network could do so. It's an option, but not a very good one.

  • After updating my iPod to 5.0.1 it won't connect to wireless networks

    Anyone noticing this problem? I updated to 5.0.1 but now the iPod won't connect to the wireless network. It's not a network problem because my iPad is connected to the same network and I also used this network to update my iPod. It didn't have the problem until after the update.  Any ideas? Thanks

    Mine works after the 5..0.1 update. Have you tried:
    - Resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Resetting network settings: Settings>General>Reset>Reset Network Settings
    - Powering off and then back on your router.

  • Won't Connect to Wireless Network

    So I've set up a wireless network in our apartment (using a Belkin Wireless G router) and our two other Macs (G5 iMac and 17" Powerbook) have no problem connecting to it. However, my flat-panel iMac, though it can connect to other wireless networks, won't connect to ours. It asks for the password, I enter it, and then it just tells me there was an error trying to connect to the network. Any thoughts? Thanks!
    flat-panel iMac, GL1, FCP3   Mac OS X (10.4.9)  

    Nothing out of the ordinary. 
    The exact type may hold the key to the issue though. Ensure that all the devices in your wireless network are using the same type. Older devices may not support WPA but if possible you should use WPA throughout. If you are using WEP then you should set a password that is 13digits long for 128bit encryption and 5 digits long for 40bit encryption.<p<p>> Yeah, I just finished updating everything.
    Have you lost the ability to connect since the updates? And if so what day/date did you upgrade?
    cheers
    mrtotes

  • Airport Express Won't Connect To Wireless Network

    My AE was working perfectley fine until one day everything  just stopped working including music streaming. I try doing a facotory reset and then set everything back up again, but when I try to connect it to my wifi i get an error message that states "an unexpected error occured. Please try again" what should i do?

    3 things must occur when the AirPort Express is configured to join a wireless network.
    You must know the name of the wireless network....you probably do
    You must know the password of the wireless network...you probably do
    You must know the exact type of wireless security setting that the wireless network is using....you may not know this, but it is crucial that the AirPort Express is provided with the same settings.
    Suggest that you contact AT&T support if you do not know the exact type of wireless security that the 2-Wire router is using, so you can then provide the AirPort Express with the correct setting to join the network.

  • MacBook running OSX 10.9.2 - Canon MX860 multifunction printer won't connect to wireless network

    At the same time I upgraded to OSX 10.9.2, my wireless modem/router died and I had to replace it.  Don't know which (or both) caused the problem, but I can't get my Canon MX860 multifunction printer back on the wifi network.  Has anyone solved this problem?

    I thought I would let you all know how I ended up fixing the issue on my system.
    I noticed that after some time the 'ping' would stop responding and I would have to reset the printer in order to get the ping responses again. This seemed more like a network strangness than an actual printer issue.
    So I connected to my AirPort Extreme to see if it was missing any software updates (it was not) and in the process I ended up making a couple of changes that I don't believe could be the cause of my issue, but any change made requires the device to reboot. After this, I was then able to add my printer.
    Everyone should also note that after you click on the + to Add a printer, it will take some time before the printer shows up in the Default section. So make sure you wait at least a couple of minutes for it to show up.
    So even though you may think the printer is actually on the network like I did (I could even put the IP address into Safari and access the printer configuration), it may still be a wireless network issue and not an actual issue with the printer or OSX 10.9.2 or the printer drivers.
    Hope that helps others having this same issue.

Maybe you are looking for