New Update Only Make Internet Connection Problem Worse?

Since getting this thing, I've had the same random internet drop issues alot of people have reported. It was annoying but not unbearable as drops only happened a couple of times a day. Yesterday I anxiously ran both the OS and Time Capsule updates hoping this lingering issue would have finally been addressed, instead those, I am now lucky to maintain net connection for more than 5 minute at a time. My modem (Moto 2210) lights are all as should be and show no status change when dropped, but the airport status has the time freeze and within a minute or two it renegotiates the connection and the cycle repeats.
I am so annoyed with this thing. I jumped from PC to Mac about 6 months ago because of the notion that Mac stuff "just works" and while my notebook has been bulletproof, the Time Capsule (dropped twice while typing this message) and AppleTV leave a great deal to be desired at this point.

The concept of Mac " JUST WORKS" is still very much true. As for Time Capsule. I think its something that Apple need to refine it. It is really making my hair white !!
But I still like it!! haha.. The idea, the concept and the look !! Apple just need to tweak its stability.

Similar Messages

  • I have updated all of my plugins and still cannot get any videos to play i get either an error message or internet connection problem message and my internet is working fine

    videos have stopped playing on firefox, i get an error message on youtube, facebook and on netflix i get an internet connection problem, i have no problem with my internet connection, i have updated all of my plug ins...what has happened

    If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
    iPhone and iPod touch: About backups

  • Just one month before i bought iphone 5... but the iphone has the internet connectivity problem... while a iphone 4s is cathcing 3G tower, whereas iphone 5 is catching 2G network only.... I've tried so many things to get recovered, but alas

    Just one month before i bought iphone 5... but the iphone has the internet connectivity problem... while a iphone 4s is cathcing 3G tower, whereas iphone 5 is catching 2G network only.... I've tried so many things to get recovered, but alas, nothing is workable- such as- restaring the iphone, reseting the networks etc... Please help me out from this problem..

    to be clear, my phone works fine when not in motion in a vehicle.  If I pull over and come to a complete stop, remaining in the car, my phone works.
    And while the phone is not working when I'm in motion, an internet search or a text message will go through, but I can not use Siri or any voice assistance when doing the text message or internet search.  The microphone is greyed out.
    So this is a unique issue, which appears to be the iPhone and not Verizon.

  • OSX Mavericks having internet connection problems.

    Just updated to OSX Mavericks on my early 2011 MacBook Pro, and it's having internet connection problems. I'm using wi-fi, and so far only Firefox and Mail will connect. All other programs (such as iTunes and App Store) won't establish a connection. This is a problem that only started after I installed Mavericks. What can I do to fix this? Thanks in advance.

    App Store / iTunes Store relies on Safari settings if you can't access secure sites from Safari then they won't work...  Reset Safari  and make sure Block Cookies Setting is not set to Always.  You can also try to create a new user and see if it works there to help isolate the issue.

  • RG54G2 Wireless Router Internet Connection Problem

    Hi,
    (apologies for the long message - trying to cover all details - summary: wireless router often drops internet connection)
    I recently bought an RG54G2 Wireless Router, a CB54G2 PCMCIA Wireless card and a D-Link GWL-630 PCMCIA Wireless card.  In addition to two laptops connected to the wireless router WLAN, I have two PCs (one Win WP Pro SP 1 and one Win98SE) connected to the router via wired LAN.  I also have a SurfBoard SB3100 Cable Modem connected to the WAN port (this connects to my ISP -  Optusnet (Australia) via DHCP).
    The problem I have is that the internet connection is disconnected many times a day (often every few minutes, sometimes an hour or so).  I am able to reconnect by resetting the wireless router via the wireless router configuration page.  When the internet is disconnected I am still able to access the computers on the LAN/WLAN (via Windows Explorer and Ping), I am also able to ping the router and the Cable Modem, but nothing outside of the cable modem.
    Also, when the internet is disconnected the System Status page indicates that the router is still connected to the internet, and the Diagnostics page passes the Test Connection test, though no external pings work.
    I did not have this problem when the cable modem was connected directly to the Win98SE PC (and other PCs via ICS).
    I have disabled the WLAN and the problem still exists with only the wired LAN.
    I have changed numerous settings in the wireless router config page with no success (eg disabling DHCP and setting each IP address, minimising LAN and WLAN speeds to 10 and 11MBps plus others).
    I have upgraded the wireless router firmware to R1.0.6.0 (no change to the problem).
    Searching on Google I have found several other cases of routers with unstable internet connections (none refering to the MSI routers), but none had solutions that helped my situation (most replies suggested updating the firmware).
    Any suggestions of how to make the router internet connection stable?
    Thanks,
    Mike

    maybe this is the FIX 4 wireles router internet connection problem
    please let me know if any one fix the problem with this tips
    thankz
    M. B.      Feb 6 2004, 8:20 am     hide options
    Newsgroups: comp.os.ms-windows.networking.windows
    From: "M. B." - Find messages by this author
    Date: Fri, 06 Feb 2004 16:20:48 GMT
    Local: Fri, Feb 6 2004 8:20 am
    Subject: SOLUTION to my router loosing connection to Windows XP
    Reply | Reply to Author | Forward | Print | Individual Message | Show original | Report Abuse
    I am happy to report that after 8 days of constant battles, reboots, phone
    calls, cable pulling, router changing, it seems that I finally have found a
    combination that has had me using Verizon DSL account for over 12 hours so
    far without any kind of interruptions.
    Since so many of you tried giving me comments and suggestions, I felt that
    it is necessary for me to post this here so that the next person will not
    (hopefully) need to go through this hell as I did!
    My original problem was that when after I purchased a D-Link Wireless Router
    DI-624, I would get disconnected from Verizon DSL at least once every 2
    hours or so. My internet access would "freeze" and then a little popup box
    at the bottom right system tray would tell me that the "LAN cable has been
    unplugged".   After about a minute or so, my internet connection would be
    back working   This was NEVER happening during the 2+ years I was using my
    Westell modem alone (running in router mode).
    Please keep in mind: The problem I was having was not wireless related as
    it was happening to the desktop computer to which the router/westell was
    connected to!
    During these last 8 days, I tried: one DI-624 wireless router, two Netgear
    614v3 routers and two Linksys WRT54G v.2 routers. In addition, I received a
    brand new Westell 2200 modem from Verizon.   I also tried about four
    different CAT-5 cables. Here is the final outcome:
    I have the Linksys WRT54G (version 2) wireless router connected to the
    Netgear Fast Ethernet FA310TX network card in Auto-Sense mode (using the
    built-in XP drivers, as Netgear told me that there was never a newer
    revision released). I have DISABLED the built-in 3Com Gigabit LOM (3C940)
    network card (via the ASUS P4C800 Deluxe motherboard BIOS), DISABLED the
    Zero Wireless Configuration service, and have put in the IP/Gateway/DNS
    address numbers inside my Windows XP Network Connections | LAN setup. My
    operating system is Windows XP Pro SP1 and the modem is a Westell 2200
    configured as bridge only.
    If my situation continues to be stable, I *might* try to go back to the 3Com
    built-in card (disable any power management) and then re-enabling the Zero
    Wireless Configuration services. But in reality, I am happy with the way
    things are and have already spent enough time trying to get my router to
    work with Verizon DSL without having it drop connections!
    Now, the next step will be setting up the WIRELESS part of this. I don't
    even yet have a laptop with me on the premises, but the 802.11g card that I
    already have is the D-Link DWL-G650. I hope and assume that this will work
    okay with the Linksys...
    One thing I must say is that I never realized that how many problems other
    users are having. I would have thought that since 802.11x has been around
    in the mainstream by now 2+ years, that things would have been much more
    "system friendlier".   And again, my issues were not even WIRELESS related.
    All 3 tech supports were not really helpful, as none of them realized that
    the problem is somehow between the router and Windows XP (Ethernet card?)
    loosing a connection, which of course results in Verizon DSL loosing the
    connection also.
    One other comment about the Netgear 614 v.3 router: A number of people have
    responded to tell me that they have had this random "router resetting"
    happen to them (where the routers behaves as if someone turned the power off
    and then back on, and the lights flash) just as if you first turn it on). I
    was lucky to witness it myself during one of the "disconnects" that I had.
    This was actually the reason why I went back to try the Linksys one more
    time. So, I would definitely recommend staying way from this 614 (version
    3) model.
    Once again - THANK YOU everyone!

  • Has anyone experienced internet connection problems through Comcast after taking a recent Apple security download?

    Has anyone experienced internet connection problems through Comcast after taking a recent security update download from Apple??

    Hello jessie029, and a warm welcome to the forums!
    What browser do you connect with?
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then Open System Preferences>Network>Configure>Proxies Tab, make sure none are set, like for HTTP & HTTPS to use at Home, if you use it at 2 locations, just make a New Location for home.
    Make a New Location, Using network locations in Mac OS X ...
    http://docs.info.apple.com/article.html?artnum=106653
    Then try putting these numbers in Network>TCP/IP>DNS Servers for the Interface you're using...
    208.67.222.222
    208.67.220.220
    Then Apply. These are safer/faster than most ISP's DNS numbers, and have been patched against DNS poisoning.
    https://www.opendns.com/homenetwork/start/device/apple-osx-tige
    How to Flush DNS in Mac OSX using the Terminal.
    In Mac OSX versions 10.5.1 and before, the command lookupd -flushcache performs this task:
    lookupd -flushcache
    Reboot.

  • Persistent internet connection problems.

    Every 8 months I get a spate of internet connection problems that last for a few months. (Meaning I get relief for two months at a time, and bad service for two months). When the previous bout of internet connection issues happened I was fortunate enough to get a good technician who showed me how to reset the connection at the fios box at the entrance to my home, by unplugging the backup battery, unplugging the connection box and then reconnecting the battery and plugging back in the connection box. The technician had remarked that there were problems with the main fios connection system to the townhouses, and somehow that got fixed.
    This time I have not had as much luck. The technicians on duty have had me reset the cable router (which isn't the problem) and even replace the cable router (also not the problem). Fortunately I have remembered the previous technician's solution and am doing that every three days, without contacting technical support since they have proven useless at this time, only continuing to have me get new routers that do not even connect without the previous steps.
    How do I get Verizion to bother to listen to me? At this time I am really wishing Cox was in my neighborhood, since I was able to go at least eight months straight without problems from them. 
    I am hoping that this causes someone to check on this problem. You had a good technician on technical support once, but  not now.
    By the way - this has been going on for over two years.

    AtrixWolfe
    Since we haven't heard back from you or have received a form submission as requested in your private support case, it appears assistance is no longer required. If you need any future help with your Verizon service, please make a post here on the forums so we can assist.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Omni 10 mostly internet connection problem, also difficulties responding generally

    Dear all,
    For two weeks now i am proud owner of an omni 10 tablet. However, i already encountered some problems like the loss of the audio System, which was luckily restored with the help of the hp support via telephone.
    Unfortunately, my tablet is not properly connecting to the internet since yesterday. It also has problems opening PDF files with 'adobe read', deleting or newly creating appointments in the challenger app and foremost it sometimes does not open the settings section depite repeatedly tapping on its button..
    Most important currently is the internet connection problem. Is connects but says at the same time that the connection is limited. Additionally, it does not offer any solutions to this. That happend with three differend routers so far..
    I hope you can help me
    Greetings

    The only thing I can suggest is for you to follow as many steps in this document as you can: Troubleshooting Wireless Network
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • Internet connection problems with OSX 10.10.3

    Does anyone else have very bad Internet connection problems after downloading OSX 10.101.3?  Does anyone have a solution? P.S. What do you think of PHOTOS, after Aperture?

    1, No problems here with internet on 10.10.3
    2, No solution
    3, I think that Photos is a toy. Apple has basically neutered both Aperture and iPhotos with their efforts to make their desktop solution match the iOS solution.
    I am currently looking for a non-Apple solution for my photographic needs since Photos in no way shape or form is able to fill my needs.

  • Can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

    can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

    Hi, Alan -
    How can I connect to both printer (HP 4050n, via direct connection) and internet (via LAN), as my iMac has only one R45 port?
    You can, but you'll need to expand your cabling a bit.
    You'll need to get an intermediate ethernet hub, switch, or router. That device sits alone, with the Mac, your printer, and your modem/LAN plugged into it.
    If you are already using a router, either separate or in combination with the modem (many modems have a built-in router), then you just need a hub or switch.
    I use an ethernet switch (10/100/1000) to let both my Macs (a 2010 iMac and an elderly G4 DA model) use my HP4000n printer and my modem. The ethernet switch is a passive device, meaning there's no setup nor instructing it required - it's truly plug-and-play. All four items (two Macs, printer, and modem) are plugged into it via ethernet; both Macs have full-time independent access to the printer and the modem.

  • When is Apple going to fix Yosemite's internet connection problem

    Is Apple going to fix Yosemite"s internet connection problem?

    Nobody here knows any more than you do about what Apple is going to do. If you want help from other end users with your problem, you'll have to describe it in more detail.

  • How to resolve this: Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, using the older version, or using basic HTML mode.

    Keep getting this message while using Gmail "Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, using the older version, or using basic HTML mode. "
    I have to use the older version of gmail for it to work properly.

    now i cant even send emails out of gmail, except when using the older version.

  • I am new How to make internet enable group in my active directory 2003 ?

    I am new How to make internet enable group in my active directory 2003 ?
    Thanks & Regards, Amol . Amol Dhaygude

    Greetings!
    What is Internet Enabled Group? Would you please clarify this?
    Mahdi Tehrani   |  
      |  
    www.mahditehrani.ir
    Please click on Propose As Answer or to mark this post as
    and helpful for other people.
    This posting is provided AS-IS with no warranties, and confers no rights.
    How to query members of 'Local Administrators' group in all computers?

  • Some Gmail features have failed to load due to an Internet connectivity problem.

    This error message comes up both using Firefox and Chrome when using G mail. Also if it works at all,
    switching from compose to draft just takes very long or keeps working.
    No problem with G mail using Internet Explorer or Safari.
    I have used Firefox for many years & want to go back when I can solve this Vexing problem.

    Thank you for your help.
    I reset Firefox, re started and wanted to answer using G mail with Firefox,
    and the same error message comes up.. When it does the screan gets
    very lite with the error message on top.
    '''''Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, or using the basic HTML version. Learn More.'''''
    I am now using Explorer to send this!
    Sy

  • HT1657 get money back on a movie because of internet connection problem

    I rented a movie but i had an internet connection problem, now after 24 hours it is fixed but my movie has expired. Can I get my money back ?

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

Maybe you are looking for

  • Special characters not displaying in button label

    My production environment is: Oracle Forms 6i connecting to an Oracle 8i database. Forms are Windows client/server. In a form there is a layout of buttons like a QWERTY keyboard. And in the property palette information for each data block, the item i

  • Additional directory structure on the ROM portion of a disc?

    Can I write an additional directory structure on the ROM portion of a disc? I want directory "A" on the root level of the disc and directory "1", "2", and "3" within directory "A". There would be various pdf's in the 1, 2, and 3 directories.

  • Serialize ---- Proxy to Idoc scenario

    Hi Folks,             I m using Proxy to Idoc scenario and am trigerring proxy messages one after other from my function module on the outbound side. However sometimes idoc2 gets posted before idoc1. My requirement is that idoc2 to be processed only

  • 0PM _ PRM_PLCS_1 Datasource returns 0 Records

    Gurus, I have a problem with this datasource (0PM _ PRM_PLCS_1).  I am trying to map it to cube 0PM_C05, but the datasource is returning 0 records and I cannot go further than that.  I have followed the steps I found in the following thread: (datasou

  • Interactive report based on a temporary table?

    hi -- I'm trying to get around some performance issues using database links, and the use of global temporary tables was suggested. However, the performance issue is in defining the query for an interactive report... and the allowable source for these