New updates in ATI Radeon (TM) HD 6470M graphic driver

are there new updates in ATI Radeon (TM) HD 6470M graphic driver? My Laptop : HP 431 OS win 7 32 bit

Whats your current version of driver for the graphic card .??
Usually if theres an update it would pop up in the driver software or through windowa updTe

Similar Messages

  • ATI Radeon (TM) HD 6470M latest driver update.

    are there new updates in ATI Radeon (TM) HD 6470M graphic driver?

    Roshan_wirantha wrote:
    are there new updates in ATI Radeon (TM) HD 6470M graphic driver?

  • Where can I find 24"  ATI RADEON HD 4850 video card or if there is one compereble to it or dose Aple  replaces with new one, because ATI RADEON HD 2600  is deffective and APPLE dose free replacment. Thanks

    Where can I find 24"  ATI RADEON HD 4850 video card or if there is one compereble to it or does  Aple  replaces with new one, because ATI RADEON HD 2600  has been recognised as deffective by Apple and APPLE  replaces for free. Thanks

    http://www.amd.com/us/products/notebook/graphics/Pages/notebook-graphics.aspx is a starting point.

  • Where can I buy a new ATI Radeon 5870 1 gb graphics card?

    I've had my Mac pro since 24/08/12. Recently the my machine has been making horrible screeching noises whenever I use graphic intensive applications like 3d design. I believe the noise is coming from the ATI Radeon 5870 and would like to replace it or have one on standby if my current one dies.
    I'm having difficulty finding a compatible replacement card, can anyone guide me in the right direction?

    One is listed here:
    https://eshop.macsales.com/shop/accelerators/ATI/

  • [GUIDE] Update AMD Mobility Radeon drivers to fix graphics issues

    I made this small guide because some topics on this forum are about this problem and there is no official step-by-step solution from HP. So, how to fix your laptop's graphics issues by updating drivers for AMD Mobility Radeon HD GPU to latest version from AMD?
    1. Install latest BIOS for your laptop from HP.http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Official-HP-statement-on-Switchable-Graphics-and-Open-GL/td-p/766285
    2. In BIOS set Switchable Graphics Mode to 'Fixed mode'.http://imageshack.us/photo/my-images/268/79500144.jpg/
    3. Install latest graphics driver for your laptop from HP.http://www8.hp.com/us/en/support-drivers.html
    4. In Catalyst Control Center make sure that active GPU is 'High-performance GPU'.http://imageshack.us/photo/my-images/853/cccv.png/
    5. Download latest version of Mobility Radeon drivers for your operating system from AMD.For now, I recommend version 12.6:- for Windows 7 64-bit:http://www2.ati.com/DRIVERS/mobile/12-6_mobility_vista_win7_64_dd_ccc.exe- for Windows 7 32-bit:http://www2.ati.com/DRIVERS/mobile/12-6_mobility_vista_win7_32_dd_ccc.exe
    6. Install AMD driver on top of HP driver. This installation will update AMD components to latest version.
    7. Enjoy graphics performance as if it was properly supported by HP.
    Solution for HP:
    Release new driver each time AMD makes a new release within 1 week maximum. Hard? But this guy does nearly the same. Alone and for free. http://leshcatlabs.net/ OR simply ask AMD to provide direct links to new drivers like in an example above (see point 5) and sticky these links with a step-by-step instruction on this forum.
    Problem solved. With kudos from Russia. Alexander.
    P.S. Does this guide work?
    http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Video-Card-Drivers-AMD-Radeon-HD-6770M/m-p/1405781#M43216
    http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/7690M-GPU-HP-HORRIBLE-DRIVER-SUPPORT/m-p/1403429#M43109

    hey there, i ve recently bought the g6-1304sv notebook first things i did when i got it was all the updates, both the windows 7 updates and the HP assistant updates(that basically gave me the new bios and i guess new drivers for graphics) when i got into the bios and actually switched it to fixed mode the notebook gave me a bluescreen (i could only get into the pc in safe mode through which i uninstalled drivers for both the onboard and the amd card in order to actually get back in the pc normal way) the strange thing after that  was that it didnt give me the catalyst center on the right click and when i downloaded and installed the latest it would say that catalyst could not start because it couldnt find the card (or sth like that) updated drivers for amd etc but still nothing. what i did then is creat backup cds and restore pc to factory settings. (does that remove bios update? dont think so)From that point onwards everything works fine and im now using the amd card no problemwhat worries me is the hp assistant messages saying that i need to update urgently. will that mess everything up again?i hope this helps others and i hope you have an answer for me thx in advance and for the guide!!!

  • ATI Mobility Radeon HD 6370 switchable graphics driver

    Is there any way to get a new driver for the ATI Mobility Radeon HD 6370 switchable graphics card? I have a HP Pavilion dv7-4276nr Entertainment Notebook PC and the latest driver I can download from HP are from 2010!! Lots of games are not running properly because of the lack of updated drivers and I cannot download them from de ATI page since they wont work. Please tell me if there is any other place from where I can download a more updated driver. Thanks in advance.

    @stormsfury 
    I understand that you are looking for help with disabling the more powerful GPU on your notebook.
    I did some searching and found a few posts on this matter, by a few of the HP forum experts. Check through these pages:
    how to disable switchable graphics
    Disabling switchable graphics or setting global default.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Fix for video tearing ATI Radeon HD 4200 using Catalyst Driver??

    Hey guys, as the title asks, is there a fix for pretty serious video tearing that I am experiencing on my ATI Radeon HD 4200 video card? I'm using the proprietary driver (catalyst, built from AUR) and would prefer to use that one or, if need be, radeonhd driver as I need HDMI sound output.
    Below is my xorg.conf.
    Many many thanks in advance to anyone who may have some ideas/experience with this.
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "glx"
    Load "dri"
    Load "drm"
    EndSection
    Section "ServerFlags"
    Option "Xinerama" "off"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    # Driver "radeonhd"
    BusID "PCI:1:5:0"
    Option "Audio" "on"
    Option "HDMI" "all"
    Option "AccelMethod" "exa" # to enable 2D and Xv acceleration on R6xx/R7xx - default AccelMethod shadowfb
    Option "DRI" "on" # to enable 2D and Xv acceleration on R6xx/R7xx - default DRI disabled
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection

    FIXED - Bad file from ATI Radeon - Use windows/ hp drivers- Cat control center not updated nor used,? thats why I could not see/ control dual monitors. This 4200 series is probaly on its way out.
    I had to pay to get it fixed.  Do NOT Update using the update from ATI Readeon?  It did not work for me.
    Hope that might help someone.  
    Bye

  • AMD Radeon(TM) HD 7650A Graphics Driver that supports Miracast

    Please 
    Anyone with any infomation as when will HP and  AMD release a new Display driver with Miracast support, would be very much appreciated.
    DxDiag on this cards driver is as follow:
    Display Devices
              Card name: AMD Radeon(TM) HD 7650A Graphics
           Manufacturer: Advanced Micro Devices, Inc.
              Chip type: AMD Radeon Graphics Processor (0x6751)
               DAC type: Internal DAC(400MHz)
            Device Type: Full Device
             Device Key: Enum\PCI\VEN_1002&DEV_6751&SUBSYS_26811462&REV_00
         Display Memory: 5875 MB
       Dedicated Memory: 2035 MB
          Shared Memory: 3840 MB
           Current Mode: 1920 x 1080 (32 bit) (60Hz)
           Monitor Name: Generic PnP Monitor
          Monitor Model: HP TouchSmart
             Monitor Id: HWP4213
            Native Mode: 1920 x 1080(p) (59.993Hz)
            Output Type: DVI
            Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
    Driver File Version: 8.17.0010.1230 (English)
         Driver Version: 13.152.0.0
            DDI Version: 11
         Feature Levels: 11.0,10.1,10.0,9.3,9.2,9.1
           Driver Model: WDDM 1.3
    Graphics Preemption: DMA
     Compute Preemption: DMA
               Miracast: Not Supported by Graphics driver
    Hybrid Graphics GPU: Not Supported
         Power P-states: Not Supported
      Driver Attributes: Final Retail
       Driver Date/Size: 8/31/2013 08:13:56, 1233080 bytes
            WHQL Logo'd: Yes
        WHQL Date Stamp:
      Device Identifier: {D7B71EE2-2411-11CF-1C73-8B06BEC2C535}
              Vendor ID: 0x1002
              Device ID: 0x6751
              SubSys ID: 0x26811462
            Revision ID: 0x0000
     Driver Strong Name: oem68.inf:cb0ae414a9bc0bd1:ati2mtag_NI:13.152.0.0ci\ven_1002&dev_6751&subsys_26811462
         Rank Of Driver: 00DA0001
            Video Accel: ModeMPEG2_A ModeMPEG2_C
    Please help me.

    Hi Sleyum"
    Thank you for your inquiry.
    HP strives to have the most up to date drivers  but many factors affect this.
    You can check the manufacturers website for recent updates for your product.
    Here is a link to the "AMD Support and Drivers page. click here.
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • FM2-A75MA-E35/A10-6800K/Radeon HD8670D - cant load graphics driver

    I'm building a new HTPC machine (specs below). OS installed fine. Boots with generic Microsoft drivers. Tried to install chipset drivers that came with mobo. The AMD catalyst control center tries to install the graphics driver (13.350.1005.0000 Beta). The screen flickers off once, then back on, then off again never to return. I'm seeing talk about flashing the BIOS with a cheap trinity core then flashing with my Richland core.  I need expert advice on how to fix this.  Thank You
    FM2-A75MA-E35 motherboard (MS-7721 Ver:1.3)
    A10-6800K/Radeon HD8670D
    2x2GB G.SKILL 1600
    Windows 8.1 64 bit
    BIOS Ver 1.5
    480W power supply
    Samsung monitor on VGA

    i had the same problem in last week, but i didnt buy a new processor, my bios just dont let me do anything so, i put a booteable usb of windows 7 and i booting the usb from bios and ignore the message to actualize to richland. Then i could install windows 7 ultimate 64bits and download the new BIOS driver. And that as you make so easy you just need to copy the ".exe" driver bios and put in a usb free. Start program, upgrade bios, reboot, and finish! you have richland v2.2 or something and you can run APU A10 6800k with no problems =)

  • New MacPro -(dual) ATI Radeon HD 2600 XT vs NVIDIA GeForce 8800 GT

    Greetings all,
    This is my first post to the Apple Discussions in general...so pardon if I missed something earlier posted.
    I am strongly considering getting one of the new MacPros (specifically the dual 2.8 quad, 2 GB RAM, 1 350 or 500GB HDD). I am caught with a dilemma regarding waiting for the 8800 or going with the dual 2600 config.
    I would prefer not to wait the 3-5 weeks for the 8800 but would be willing to if having 2 2600s isn't much of a performance boost compared to the 8800.
    This is how I mainly plan to use my new system (assuming basic day to day usage e-mail web browsing, general mac usage, etc).
    -Dual boot (Mac OS and Vista Ultimate)
    -Mac side usage would range from iPhoto/iMovie/DVD authoring to playing the latest Mac games
    -PC side are primarily gaming (Halo 2, Lord of the Rings Online, etc) and Media Center
    Does anyone have input with the above said scenario or any other general compatibility issues with how I plan to use the system? Any feedback would be greatly appreciated.
    Thanks!
    -Hanover

    hi!
    tomorrow i'll order my new mac pro and got a similar question regarding these 2 cards.
    i wanna buy 2x24" tft's too, not sure which one but i'll be some of the "cheap low-tec" ones ( ) like the new dell E248WFP, samsung 245B, lg L246WH or iilyama B2403WS
    i know that the dell & samsung "only" tn panels so i'm not sure, if it make sense for me to wait or buy the 8800 later.
    the 90% usage is audio with logic and some digital lifestyle things. the other 10% it could be that i install the dark side os on an external drive but only to play some games (if the future 24" tft let me ). i don't know which games i'll pay, in the past it was just the strategy multiplayer shooter from tom clancy, like ghost recon and rainbow six (the native mac versions). but i've seen that there ar e some new one out but only for pc.
    so what's your advice for me? does make any difference to alternative order 2 2600's, each for one of the 24"?
    thx alot and best regards

  • ATI Radeon 9000 Pro Mac AGP (driver needed for OS 9.2?)

    Hi guys!
    How's everybody doin?
    I just picked up a used ATI 9000 AGP 128 MB (as an upgrade for my G4 Quicksilver 800 MHZ).
    I'm using 2 HD's (one with OS9), the other (with OSX)
    I think OS 9.2 will do ok without the need for a driver, but I just wanna make sure ...
    Thanx
    Everyone is very helpful around here
    Mike

    Hello again Carl, and Dave
    I know it's been a while since we last talked about this issue. Well apparently, I do have OS freezing problems
    with 9.2 and the ATI 9000 Mac Pro - take a look:
    http://discussions.apple.com/message.jspa?messageID=4289264#4289264
    Wonder if your driver would solve this?
    But can I put your driver in the system while it's still functioning with the older OEM video card back in?
    (that's the only way I can get the system not to freeze)
    Thanks
    Mike

  • Is the ATI Radeon HD 4870 512mb Graphics card good

    I'm thinking about getting a new mac pro and i've been looking a this graphic card and i've also been reading comments about this card and just wondering is this card good at all.
    null

    I don't want to sound like a jerk but don't want people to wast their money because
    You said
    "If you have a 2006-07 mac pro, and want the most power you can get, crossfire two flashed pc 4870s."
    That is wrong because a 2006-2007 mac pro only has ONE PCI.1.1 X16 slot you can only make it so you have two X8 slots or one X16 & one X8 To get anything from a CrossFire or SLI setup using any PCI X16 card you need two card slots that are X16.
    I do agree & know if you have a 2006-2007 mac pro, then yes the apple 4870 is most likely the best you can get, besides going a flashing route. (I don't like to flash & the 4870 WORKS IN THE 2007 Mac Pro)
    I have a 2,1. Mac Pro 8 Core 2007 & just got the New 2009 8 Core with 2.93 GHz Duel CPUs & I got the new GTX 285 came in the mail before the Mac Pro I got the 4870 from the 2009 to work in the 2007. But I have not tried the GTX 285 in the 2007 as the drivers have to be loaded from the disk that comes with it first & I did not take the time to do that & had the reformat the 2009 after trying to put the GTX 285 in the 2009 I found myself removing the 4870 I had just put in the 2007 then back in the 2009 then reinstall OS X 10.5.7 after that loading the driver disk from the GTX 285 first in the 2009 before placing the card the new Mac.
    So I will when I have less work try the GTX 285 in the 2007 Mac Pro & let you know what happens.
    I hope I was of Help
    Thomas

  • Did new update, and now screen when to old graphic and shows folder

    I recently did the newest update on my ipod, and then it deleted all my songs and when to these old school graphics and will only show a folder with an exclamation point. My computer is having trouble recognizing it also. Please help!!!

    I recently did the newest update on my ipod, and then it deleted all my songs and when to these old school graphics and will only show a folder with an exclamation point. My computer is having trouble recognizing it also. Please help!!!

  • ATI Radeon 9600 pro 256M graphics card

    I had the above card in my G4 as an upgrade, recently the G4 died so I removed the card. I was wondering if this card would be useable in my quad pro to allow the use of a second monitor. It has dual avi ports on it so I thought it would ideal for a smaller secondary monitor.
    Any help on this would be much appreciated.

    Thanks Kappy,
    Any recommendations on an alternative card that might do the job (and not break the bank)
    The monitor I want to connect has an avi connector.

  • Radeon HD 8750m switchable graphics driver BY HP is not working on Windows 8.1

    Hello all,
    I have  laptop Envy 6-1200el.
    It's a good machin but I have always been annoyed by video drivers trouble.
    When I bought my PC last year it worked good when we had Windows 8, but the video drivers didn't work properly already there.
    The drivers made troubles when I tryed to start some 3D applications as Batman: Arkham Asylum. The problem was the HP video driver. That driver is made by Radeon HD drivers plus Intel HD 4000 series all together.
    To make the two video cards working together properly you cannot use intel driver installation first then the AMD catalyst installation utility, but you need a driver installation utility that installs the two video cards both, otherwise the switchable graphics will not work properly and 3D applications won't start.
    When I had Windows 8.1 update I had absolutely to find a new driver. I downloaded the automatic utility from AMD site and luckily it downloaded an updated driver that was including and installing together both the video cards properly. Since there my laptop started to work very good in everithing.
    Some days ago I had to format my PC and that good video driver got lost.
    I installed almost everithing including windows 8.1 update but I sadly discovered that on AMD site it was downloadable only the Radeon HD driver not including any more switchable graphics installation and Intel HD driver.
    I have now installed the video driver given by HP on the right laptop portal, but this driver IS SO BAD!!!
    HP says that it's an update driver working properly on Windows 8.1 but it's false!
    MY PC WITH THAT HP DRIVER IS MAKING MANY TROUBLES:
    - 3D GAMES ARE NOT STARTING OR NOT WORKING PROPERLY;
    - PASSING THE MOUSE ON THE NEW START BUTTON ON WINDOWS 8.1, THE BUTTON BECOMES BLACK!
    - HP UTILITY CENTER IS NOT OPENING;
    - HP SUPPORT ASSISTANT IS NOT WORKING PROPERLY;
    - THE SYNAPTICS MOUSE DRIVER DOESN'T WORK PROPERLY, THE DOUBLE TOUCH DOESN'T WORK ETC.;
    - iNTEL DRIVERS INCLUDED ON THAT HP PACKAGE ARE OLD;
    - SWITCHABLE GRAPHICS DOESN'T WORK GOOD AND IS NOT ABLE TO ADDRESS SOME 3D CHARGES TO THE RIGHT CARD.
    PLEASE HP RELEASE AN UPDATE! pLEASE MAKE A REAL COMPLETE DRIVER THAT IS REALLY ACTUAL AND IS REALLY WORKING ON WINDOWS 8.1 WITHOUT CONFLICTS, WITHOUT GRAPHICS ERRORS ETC.!!!
    THIS SITUATION IS UNACCETTABLE, SOLVE IT PLEASE!

    Hi Fotoji,
    I want to be honest, it's very disappointing for me to be treated like a child.
    You should know that most of the people you meet here in this forum are not n00bs and the causes you suggest to consider haveall already been excluded in every way you would try yourself too!
    The fact you say, that the issues are caused by a 'broken OS' are so disappointing and unbelievable!
    I work in IT field since I was 14yo and now I am a graduated 28 who knows very well how to handle a PC in a clean and smart way.
    Look, many of these issues was already 'on' when I bought and started my PC for the very FIRST TIME.
    The video drivers needed are auto-installing drivers containing intel and AMD video drivers both and installed together at the same time.
    The first day I had my PC the system was VIRGIN, I simply installed steam then ran 'Batman:Arkham Asylum' to make a try, it has never ran up, no matter if the OS is W8 or W8.1, no matter if the PC is new or used for 6 months, that driver has never worked good.
    I tryed many things, used HP recovery manager several times in order to make a clean OS new installation, but it always went like that.
    Recently I sent my computer to HP Italy fro an hardisk problem, replaced in warranty. The laptop came back CLEAN, perfect, with W8.1 and all the new recent drivers.
    The problem was the same, games did not run or ran badly, the start symbol was black, HP Utility Center didn't work.
    So tell me where's the magic when I unistall in a CLEAN AND CORRECT way those video drivers, why EVERITHING COMES TO WORK SO GOOD BACK????
    Some months ago I knew that those drivers where so bad so I tryed to download the original driver package from AMD site, hoping that they was including the intel video drivers both, and guess...IT WORKED!
    Those drivers was including the intel video drivers too during installation, then after a restart I had NO GRAPHICS ERROR, NO HP UTILITY CENTER FREEZE, ANY GAME OR 3D APPLICATION WORKED AT LEAST 2x FASTER AND NOT ANY COMPATIBILITY PROBLEM IN ANY STATE OR SITUATION.
    Unfortunately my laptop started to have maybe some motherboard power problems and my HDD passed away then HP took my pc and fixed it.
    When it came back it was perfect again, virgin, with all the update installed, with those bad HP drivers installed again, so with all those problems that I found since I bought it: graphics error, compatibility problems, some programs freeze, all WHITOUT TOUCHING ANYTHING!!!
    I knew that I would solve it just downloading the right drivers directly from AMD site but UNLUCKILY THE NEW CATALYST 14.4 DIDN'T INCLUDE THE INTEL VIDEO DRIVER ANY MORE.
    I had all those compatibility, stability and graphics problems always with a just-formatted computer with all the updates installed, a virgin untouched machine just formatted completely automatically using HP recovery manager or fixed by your engeneers!!!
    The only case everithing worked very good was when I used the original AMD's drivers, when these used to inclued the intel graphics drivers too during AUTO-INSTALLATION.
    I am replying now using a just-formatted machine automatically and perfectly just using HPRECOVERY MANAGER,and updated using WINDOWS UPDATE and HP SUPPORT CENTER self updater.
    So guess what???? When I uninstall in A CORRECT WAY your HP video drivers (doesn't matter if the new one or the oldest) everything works good back, and when I used original AMD drivers everything worked so good.
    It's so hard to do something wrong about it, the driver installation utility are IDIOT-PROOF, you cannot do anything during installation except for clicking the RESTART button.
    So AMD used to make perfect drivers and now not any more, sadly, every issue disappears without your driver installed, HP sent me a perfect virgin computer with the same issues.
    So please, don't tell me that AMD is able to make better software, don't tell me HP is not able to handle a recovery and sent me a pc with the same issues, don't tell me I probably made a bad use of my VIRGIN laptop after years spent on SGI workstations UNIX based.
    I know how to keep a pc clean, and I'm telling you something more: the new synaptics mousepad driver package you are giving from HP website and HP support center DOESN'T WORK GOOD TOO!!!
    Once you accept the auto update it starts with the self installation, but after the restart gess what?? The double toe gesture used to simulate the right click doesn't work any more!!!
    No matter if you try to change any option in the control panel, no matter if you have windows 8 or 8.1, just try to unistall that and reinstall the old synaptics mouse driver and, OH WOW MAGIC, IT WORKS GOOD BACK AGAIN!!!
    So now what?
    Are you thinking that HP engeneers who fixed my laptop wasn't able to re-install windows and drivers?
    The IT engineers working for HP are maybe also n00bs that can't handle a pc format and send me a BROKEN OS as you said?
    I am magically breaking my os system just clicking one time on clean automatic HP recovery button then click on the automatic update buttons twice????
    Perhaps AMD is able to make more stable end recent drivers than HP does???
    (considering that aven the last HP graphics drivers update is so bad because the intel side of the package is very old and you can recognize it just making a comparison with the new intel additional control panel!)
    I don't need to recover the system for the 4th time in a proper way (plus HP fix would be the 5th!), I know these silly things.
    I need to be taken seriously and not be treated like a grandmother who's not able to switch-on a smartphone!
    I would challenge anyone to operate on my computer and try to solve it using Teamviewer and HP's drivers!
    I think I've been quite hard nut hopefully clear, so please do something more than giving me a manual fro grannies.
    Thank you.

Maybe you are looking for

  • WebHelp - What Files Need to be Posted on the Sever

    Hello, can anyone tell me what files & folders I need to post to the sever to enable my project to run. I have just developed a small project and in the folder where it is saved there are two folders and 44 other files inc the .xpj file. Can you help

  • Controlling Multiple PRI T-1's with 1 d Channel

    We are connecting a Redcom IGX to three Cisco 3745 routers (12.4(7g) ios) with 13 T-1's using MGCP and a Call manager running 4.1. We just converted to PRI using 4ESS between the two. The redcom has a way to control (span) up to 5 T-1's using one D C

  • Account hijacked for calls to Ethiopia and Egypt

    Hi, My skype account was suddenly auto-recharged today (20th April, 2012)  around 1:00AM (GMT+5.5).  When I checked, several calls were made to EGYPT and ETHIOPIA.  I have taken the necessary measures to prevent further charges.  I also notified skyp

  • Applet not loading from jsp

    using weblogic server 6.1 sp2, solaris 8 mu7, netscape 6.2.1           the compiled applet UploadScreenshots.class is bundled into a web app           file named roach.war and resides in the following directory in the war           file:           WE

  • ScrollBars not showing up properly

    I am displaying a JTree in a JScrollPane with default settings ie. both horizontal and vertical scroll bars will show up when the contents can not fit in to the scroll pane.In this case when i expand the tree nodes the scroll bars are not showing up