New URL for PieroF FCE Effects

Since a few days ago, the site where I make some FCE and FCP plugins available for free, has changed its URL. The new URL is:
http://web.mac.com/piero.fiorani/PieroFFCEEffect/Welcome.html
You can still access all my plugins, either from the Welcome page or after you change each "%20" char into "_" in their URL, AND remove "iWeb/" from the URL.
Note. That's correct: the site has changed its URL... I did not change its URL ! This seems a new feature for iWeb (in iLife 08) which maps "blank" characters in the web page names into "_" and not "%20". While I personally like this solution, I didn't like the automatic renaming of all my pages (without warning or request for confirmation) since this made them immediately unavailable to whoever knew the old name...
In any case let me know if you still have problems accessing those plugins.
Sorry...
Piero
Thanks Tom: in fact redirection works, but to the Welcome page only.
Message was edited by: PieroF

Thanks for letting us Piero. The old link still works though. You just get redirected to the new URL name.

Similar Messages

  • How to convert existing url to  a new url for crystal reports on server

    Post Author: Ashton Kutcher
    CA Forum: General
    Hi folks,
              I have crystal reports  on the webserver and it has a url  http://myserver/legal/viewreport.csp?website=legal_website&report=Budget%20Group%20Costs&toolbar=110101&@Year=" + Year "&@BudgetGroup=" BudgetGroup, 'newwindow', config='toolbar=no, menubar=no, scrollbars=no, resizable=yes,location=no, directories=no, status=no')
    I need to convert it to a new url like this  http://myserver/businessobjects/enterprise115/InfoView/scripts/openDocument.aspx?sDocname= Budget%20Group%20Costs&sPath=legal_website&toolbar=110101&lsS@Year=" + Year "&@BudgetGroup=" BudgetGroup, 'newwindow', config='toolbar=no, menubar=no, scrollbars=no, resizable=yes,location=no, directories=no, status=no')
    please help me out how should I convert the old exisiting url to a new url??

    Hi,
    You can try using "goLiink" and then use the property targetFrame set to "_blank"; below are some for ur references:
    targetFrame          
    _blank: The link opens the document in a new window.
    _parent: The link opens the document in the window of the parent. For example, if the link appeared in a dialog window, the resulting page would render in the parent window.
    _self: The link opens the document in the same page or region.
    _top: The link opens the document in a full window, replacing the entire page.
    Thanks,
    Pandu

  • Url for the geocoder

    Hello friends I'm learning how to use the oracle maps, now I'm studyng the "gant_chart_pivot_table.htm"
    of the oracle examples to jdeveloper 11g this is the url http://www.oracle.com/technology/obe/obe11jdev/11/dvt/gant_chart_pivot_table.htm#tv
    but the url for the geocoder is lost , Who knows the new url for the geocoder?
    the url of the tutorial is http://elocation.oracle.com/geocoder/gcserver , but not the aplication cannot connect to this url.
    thanks
    salu2 from Ecuador

    Welcome to Apple Discussions!
    I don't know the direct URL for it, however, http://www.apple.com/swupdates/ usually posts the same updates sometimes at the same time, or just a little later than the Software Update themselves. I prefer using the website, as then it is easier to read the details of the update and get a chance to bookmark it for later downloading elsewhere.

  • What is RSL URL for OSMF 2.0?

    Hi,
    I am implementing a dynamic plugin to work with OSMF 2.0, I would not like to merge into OSMF 2.0's code into my pluign, instead, I would like to use Runtime Shared Library for OSMF 2.0 as link type,  the player app will  link to the OSMF 2.0 through RSL as well, and load a URL for my dynamic plugin.  But unfortunately, I could not find an official RSL URL for OSMF 2.0,  can you help to tell me the RSL url for OSMF 2.0?
    Thanks a lot,
    WB Zhan

    From Flash Builder 4.6,  I can get a RSL URL for an older version of OSMF as below,  but it is NOT for OSMF 2.0,   my dynamic Plugin works on OSMF 2.0 only. 
    Appreciate if you can tell me the new Url for OSMF 2.0.
              <libraryPathEntry applicationDomain="default" forceLoad="false" index="2" kind="3" linkType="4" path="${PROJECT_FRAMEWORKS}/libs/osmf.swc" useDefaultLinkType="true">
                <crossDomainRsls>
                  <crossDomainRslEntry autoExtract="true" policyFileUrl="http://fpdownload.adobe.com/pub/swz/crossdomain.xml" rslUrl="http://fpdownload.adobe.com/pub/swz/flex/4.5.1.21328/osmf_1.0.0.16316.swz"/>
                  <crossDomainRslEntry autoExtract="true" policyFileUrl="" rslUrl="osmf_1.0.0.16316.swz"/>
                </crossDomainRsls>
              </libraryPathEntry>

  • How can I make linux firefox let me click in the url address bar and have the whole url highlighted so that I can delete it with one press of the delete button, in preparation for typing in a new url?

    It's clear no human has read my question yet, but some computer somewhere has asked for more details.
    I don't know what kind of details could make my question clearer - I thought it was verbose to begin with.

    The question is clear. <br/>
    Type <b>about:config</b> and change (double click) either or both of
    <pre>browser.urlbar.clickSelectsAll
    browser.urlbar.doubleClickSelectsAll</pre><br/>
    But as a user of Firefox on Linux I wouldn't want it to do that. If I already have a URL in there I often want to modify it and that's easy as it is. If I want to type a completely new URL I can double-click it to select the whole thing then just start typing - no need to hit delete. <br/>

  • Create URL for image content and display in new window

    Hi,
    I am attaching a new image and it is displayed in a table view.
    I am having problems creating the URL for the image.
    When i give the link of external site like http://www.google.com, it works fine. It does not work when i give as www.google.com.
    It does not work for the image. Please help.
      ls_properties-name         = 'KW_RELATIVE_URL'.
      ls_properties-value        = lv_imgname.
      APPEND ls_properties TO lt_properties.
      ls_properties-name         = 'LANGUAGE'.
      ls_properties-value        = sy-langu.
      APPEND ls_properties TO lt_properties.
    Assign file properties
      ls_file_access_info-binary_flg = 'X'.
      ls_file_access_info-file_name  = lv_imgname.
      ls_file_access_info-mimetype   = 'image/pjpeg'.
      ls_file_access_info-property   = lv_string2.
      APPEND ls_file_access_info TO lt_file_access_info.
    Move content to file_content
      lv_str = lv_img_content.
      lv_strlen   = XSTRLEN( lv_str ).
      lv_offset   = 1022.
      lv_bytes_rd = 0.
      lv_bytes_rm = lv_strlen.
      ASSIGN lv_str TO <fs>.
      WHILE lv_bytes_rd LT lv_strlen.
        IF  lv_bytes_rm LT lv_offset.
          ls_content-line = <fs>+lv_bytes_rd(lv_bytes_rm).
        ELSE.
          ls_content-line = <fs>+lv_bytes_rd(lv_offset).
        ENDIF.
        APPEND ls_content TO lt_content.
        lv_bytes_rd = lv_bytes_rd + lv_offset.
        lv_bytes_rm = lv_strlen - lv_bytes_rd.
        CLEAR ls_content.
      ENDWHILE.
    Create a Document using class CL_CRM_DOCUMENTS
      CALL METHOD cl_crm_documents=>create_with_table
        EXPORTING
          business_object     = ls_business_object
          properties          = lt_properties
          file_access_info    = lt_file_access_info
          file_content_binary = lt_content
          raw_mode            = 'X'
        IMPORTING
          loio                = ls_loio
          phio                = ls_phio
          error               = ls_error.
    Using the logical and physical id's, get the file location as an URL
    data:
    lv_no type char1 value '1'.
        CALL METHOD cl_crm_documents=>get_with_url
          EXPORTING
            loio     = ls_loio
            phio     = ls_phio
            url_type = '2'
          IMPORTING
            error    = ls_error
            url      = lv_url1.
    should i prefix the url with 'javascript:'?
    Thanks in advance.
    Regards
    Shanthi

    Hi Shanti,
    The URLs that are external to the server, you should always have http://, your image URL is has http:// prefix? Other wise system will always look for the same inside the current BSP application. For Example your BSP application is ZBSP and if you are accessing www.google.com the URL in the browser will be
    *******/bsp/ZBSP/www.google.com which will not be existing, hence causing the problem.
    If not try adding http:// to the URL by concatenation and try.
    Regards,
    Ravi

  • What are the new / correct URLs for the Servlet / Persistence XSD ?

    Hi,
    the URLs: http://java.sun.com/xml/ns/persistence/persistence_2_0.xsd
    http://java.sun.com/xml/ns/persistence/persistence_2_0.xsd
    Do not work anymore and you constantly get annoying validation errors in all XSD validating IDE's.
    What are the new URLs now? I could not find any related document or article in the internet.
    Thanks!
    Sebastian

    you should never rely on remote resources for xml validation. you should always have them locally.

  • Hotkey shortcut for selecting url in address bar to type new url?

    Hi, is there a shortcut hotkey for selecting all of the url in a browser window in oder to quickly type a new address, etc?
    Thanks
    (For example, rather than move the cursor up to an address such as http://www.apple.com is there a key combination I can use to select the entire address so I can type in a new url, such as pixar.com ?)
    Sorry if this is so basic.....

    oceanbluesky,
    Use (⌘ + L)
    ;~)

  • What is the URL for Nightly Start Page i want to use that in my Open a new tab?

    How can i find the URL for the new Nightly start page as i want to use it in the new tab so it is the same as the home page . i use the nightly start page as home page too

    hello caseyvan, "about:home" is the url for the default firefox/nightly start page. you can set that as a new tab page when you can enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up) and search for the preference named '''browser.newtab.url'''. double-click the entry & change it to any site you want to show up on a new tab.

  • After Effects CC only - Purchasing a new system for....

    Getting ready to purchase a new system for After Effects CC.  I create 3D effects, video effects and many animation effects small scale for website development and YouTube.  I have been considering a system with Xeon E5-2697 V3 processor (14 cores, 3 GHz Clock), 16 GB RAM, 1T SR-HD, and of course a NVIDIA GTX-GPU Cuda video card.  Would this pass the system requirements for After Effects CC?   Any other recommendations?  I do not want to experience the slow downs that I am currently having with my i7 intel system.
    Thank you
    Alexandra Parks

    ....Eric may have the most expert advice on this topic....he builds machines at ADK for what you are talking about.
            You may want to ask him about Haswell E...AE requires CPU clock speed, many cores, and large system memory. Also, a fast, separate drive for the  " global performance cache" is beneficial. The GPU use is less than what is used in Premiere ....a solid GeForce card like the NVidia 970 may suffice. Eric can advise

  • How to find out the URL for OAM at a new site

    Hi
    if you turn up at a new site, and you only have the oracle / applmgr account password
    to a linux server, how would you go about finding out the URL for OAM ?
    Many thanks

    OAM URL is:
    http://hostname.domain:port/servlets/weboam/oam/oamLogin

  • How can I see the URL for a page opened in the new version of safari?

    Sometimes I like to copy the URL for an article I find on the web.  The new version of Safari doesn't seem to show the URL.  How can I see it?

    Just click inside the url address bar. Full url address highlighted, will appear.
    Best.

  • Buying a New Machine for After Effects

    Can anyone give me some advice on what system to get for an After Effects, Maya and Photoshop user.
    I am looking at Dell's and HP's and I would like to know what level of processors, how much ram and what kind
    of video card etc. I would like to get a fast and reliable system without going overboard.

    Thanks for the info. To let you know, I have worked with AE for years doing corporate and commercial work. The system I am on now is just getting old. (dual Zeon 2.40ghz with 2 GB of RAM, NVIDIA Quadro FX 500) My projects can get complex. The last job I did was in about 2.5 minutes long and took 3 hours to render. Lots of footage and several large photos to deal with. Many precomps and lots of effects. The RAM previews take up all my time. They are very slow. Also, my MAYA projects can get fairly complex too. Lots of textures and raytracing. My renders vary from approx. 1 minute to 40 minutes per frame. More and more my clients are asking for HD and my machine just can't take it. I feel like I spend my whole life waiting for renders, so I am thinking of spending 3 to 4k on a new system.(more if I need to)

  • I have a new logic board and fce is asking for my serial number from packaging , which has long gone- help?

    final cut express
    I have a new logic board and fce is asking for my serial number from packaging , which has long gone- help?

    Without the serial number your FCE disc is useless and nobody here can help.
    Your only chance, if you have the receipt or can prove your purchase is to contact Apple and hope they may be able to help.

  • Hi, problem occurs when I'm clicking a button or a new url on the current site. For instance, when i clicked that "Ask This" button on this web site, It redirects me to the default homepage. I cant go back and I'm losing the previous web site HELP PLEASE!

    Hi, problem occurs when I'm clicking a button or a new url on the current site. For instance, when i clicked that "Ask This" button on this web site, It redirects me to the default homepage. I cant go back and I'm losing the previous web site HELP PLEASE!

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Maybe you are looking for