New User Log-In Help

I just downloaded oracle 10g express and installed it. I selected to run the application after install and its asking me for username and login. How do I get a username and password? I tried the username and password that I created after signing up, but that did not work.

joracle wrote:
I just downloaded oracle 10g express and installed it. I selected to run the application after install and its asking me for username and login. How do I get a username and password? Hi!
During installation of XE you was prompted for password for users SYSTEM and SYS.
For the first time log in into web interface (APEX) use username SYSTEM and password you typed during install.
After that you should unlock user HR account to be able to start with building your first APEX demo application.
Cheers!

Similar Messages

Mountain Lion has created new user log-ins and moved old Users to a separate folder

Mountain Lion has created new user log-ins and moved old Users to a separate folder.
The new users are set-up as "standard" and the old ones were "Administrators"
All files are missing, i.e. no desktop files etc. But they are located in a folder called "Users 1" which is a new folder.
Can anyone help?

Here is perhaps the solution :
http://forums.macrumors.com/showthread.php?t=1191262
follow the "Ratatapa's" instructions.
1/ boot on Recovery part (command R)
2/ find "terminal" in disk utilities
and write "resetpassword" for root. Enter a new password for the root user.
3/ reboot as root user (or when your are login, log out and typing to open a other user "root")
in the "system pref" panel, open "users and groups" and then create new user with the same name, same password.. normally it must be asking you about "You are already an account with the same name" say yes. And it's done.
4/ Log out. re-log as the normal user. desactivated the root user.
about "root user", see also :
http://support.apple.com/kb/ht1528
your welcome
f

How can i disable the registration pop up when a new user logs in each time?

i work at a University and i install FCE 4, it launches and it comes to a registration screen.
how can i get that registration screen to go away so that when new users log into the Mac
they wont get that registration screen pop up?
any help would be great.

The registration screen should only appear after every 5 launches.
If you register FCE it will no longer appear assuming it is on the same computer.

MF Crashes on startup, but works in safe-mode and for a few minutes after making a new user, can anyone help?

After troubleshooting for a few hours, I still cannot find a proper solution. Effectively, I learned that if I create a new profile user, with this command in windows Run: "C:\Program Files\Mozilla Firefox\firefox.exe" -p , I can open the user profile menu manually, and create/delete a new/not-new user, and upon creating and using a new one, it works fine. For a couple of times opening the browser, anyway, in which it results in the same problem as before. I took a list and compared the old files to a brand new users files, and did find some differences. Take these into effect,
The compatability and extensions .ini files were differed by 3 kb , with a new user being 1, and the old user being 4.
The Local Store .rdf file differed from 2 for a new user, to 4 for an old user.
The Mime Types .rdf file differed from 3 for a new user to 4 for an old user.
Plugin Reg(istry?) .dat differed from 17 new to 20 old.
Search.json differed from 13 new to 16 old.
Search Metadata.json differed from 1 new to 4 old.
URL Classifier Key 3.txt differed from 1 new to 4 old.
Web App Store.sqlite differed from 96 new to 128 old.
(All units are KB)
Seeing as a few articles relating to the problem are "no longer maintained" and the solutions work only temporarily, I came here hoping to fix this little issue. Thank you, and good luck in advance.
-Av
Note; the first crash ID is for the new user that crashed, the last is for an old user.

I see.. I have heard rumors of this, but it did not occur to me that this would literally crash upon startup. Thank you for the help, Edmeister. Will check as "solved it" if it works. Thanks again!

New user log on went to my google home page, how do I get a seperate one?

I'm setting up a new user on XP, when I tried to get a Google homepage it put my existing one on the new user's log in email and all. How do I get a separate one?

Bumping

Freaky new User log-in option at start-up-arrgrhghghhh

When I start-up (10.4...) I am presented with the log-in screen per my usual preference settings - I recently had to reset my passwords using the install cd to access the options for such a task (don't ask). Everything went as planned but when the computer restarted, in addition to my usual list of users there was a new user, listed as 'Other' and if selected a screen opens presenting spaces to type in a User Name and User Passwork.
When I check my system prefs>Accounts, this new 'Other' is not listed. How do I make it go away?! It's freaking me out. MANY THANKS!

Hi, just to confirm that you followed what Henry G4 said.
You logged on as an Administrator first?
then find>
Apps
Utilities
Net Info
"Security" (at top of desktop)
click "disable root user"
log out, and "other" should be gone!
Good computing! Robert.

New User Log in

I m running 10.4.10 and I have tried to create a new user account. Every time I try and add a new user I am able to create a name and password and it the system seems to accept it however when I try to log in with that user name and then password I get the jiggling password box. I have tried multiple times to no avail . This was also a problem under 10.4.1 etc. All else seems OK. Tried correcting permissions, Techtool, Disk Warrior, Zapping Pram etc.
Bob

You sure you got the casing of the password correct?
You can change the password. These two methods will skip lots of the normal change password software.
Mac OS X:
Changing or resetting an account password via GUI:
http://docs.info.apple.com/article.html?artnum=106156
Changing password from single user mode:
You can also change the a password from single user mode. These steps are more complicated.
You need to get into single use mode for steps one and two that are listed below.
This page will tell you how to get into single user mode.
http://www.securemac.com/macosxsingleuser.php
Basically, you hold down the command-s key when powering on. The command key has a little apple symbol on the lower left. It is between the alt/option key and the space bar. On a PC keyboard, it will be the windows key, I think.
You can change the password on an account. ( Do you know Unix. You are in a Unix single user console. )
To find out the users on the system type:
ls /Users
Pick one of the users and type:
passwd a-user-name
and enter the new user password. You need six characters.
Robert

New user who needs help quickly!

Hello!
I am a new user upgrading from using Premiere 6.5. I have had much success but there is one part that I can't figure out. I know on the 6.5 verison I would be able to right click my video, click on "Video" and then click on "motion" to adjust the size of the video as if I wanted to scroll text next to the video. I can't seem to figure that out in this new version. Help!
Thanks,
Vince

Left-click to Select the Clip. Look in the Effects Control Panel and you will see all of the Fixed Effects (Motion, Opacity, etc.) and any Effects that you have added. Their control (plus Keyframing) will be found there. By default, it is in the Pane with the Audio Mixer and the Source Monitor.
Good luck,
Hunt

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

Message "another program on your computer would like to modify Firefox with the following add-on" appears every time a new user logs in... Bad problem

I have just deployed an image to over 500 workstations, and they are all deep frozen using deepfreeze.
When users are logging in, and open Firefox they are getting the message "another program on your computer would like to modify firefox with the following add-on:" Adobe Acrobat - Create PDF 1.2
Yes I know u can do a one-time click and allow, but we have potentially 50,000+ students logging into these PCs and it is unacceptable that they are greeted with this message rather than the Homepage.
This is very dissapointing, as we upgraded to the latest version of firefox in preperation for rollout, and then added some software like adobe.
The profile is kept in the default user, so everytime a user logs in, they will get prompted with the message, and this will always happen because we use deepfreeze.
I need a FIX ASAP from mozilla on how to disable this pop-up via Group Policy...
Not at all happy,
Sharpy

Hi,
One way you could try is to install Firefox on a fresh PC/image which has the same Adobe software versions installed as the clients. You may also have to install the same extensions as well as software for any additional plugins as on the clients. Start Firefox and make sure everything is okay. After that you can copy and overwrite the '''extensions.ini''', '''extensions.sqlite''' and '''pluginreg.dat''' files and probably the '''extensions''' folder and any supporting files of the extensions from this fresh profile, onto a client profile after temporarily disabling/unfreezing Deep Freeze. If everything is okay you can then push the changes onto the other clients via a logon/startup script after temporarily disabling Deep Freeze and then re-enable Deep Freeze.
[http://kb.mozillazine.org/Profile_folder Firefox Profile Folder]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]

New user need some help.

I am a brand new user, have a video by someone else, how do open the file to edit? I would like to explode the video to make additions and deletions?

Hello, Russell70. You made a wrong turn somewhere, I'm afraid. This is the forum for requesting enhancements in future versions of Photoshop Elements, Adobe's still photo editing program. I think you want the Premiere Elements forum, which is here:
http://forums.adobe.com/community/premiere/premiere_elements

I had lost my icloud account password.i want to reset my password but i dont remember my security question's answer also.and i even dont know my email id in which password reset linc cuold be send..i am new user..please help me out:(

is there any rule that an app downloded from my old apple id cannto be updated by my new apple id?

Since you say you are a "new user", please explain how and why you have an iCloud password, security questions, and an email id that you cannot remember. How could this happen?

New User Exit ABAP help Needed

Hi ABAPers.
I need some help please
PLease give me the coding for the following scenario
if a user exists in table usgrp_user with user group 'x'
allow that user to post to GL account HKONT '441100' without a trading partner VBUND
If not, then issue message
thanks so much guys
Brian

Hello
Check with ABAPer on the user exit coding. Once done create a substitution rule and assign the user exit there.
Reg

New user, need major help...

I just got a new Ipod shuffle for Christmas and having a little trouble...I have many mp3's on my winamp, and really wanted to transfer them to the shuffle so i could listen to them while i work out or travel...i right clicked on the song and it transferred, but i can't get them to play on the ipod....basicaly, how do i transfer mp3's that i currently have onto this and have them play?...is the shuffle for itunes only?...thank you for your help, i appreciate it...

Add the songs to the iTunes library, and then send them to the iPod shuffle from there. The iPod uses a folder structure different from other MP3 players, and requires software specifically designed for that structure for storage of playable music.
(27678)

New user needs workflow help..

Hi,
I have been using iMovie for years and love the product. I have done 3 documentary style films (60 - 90 minute range) using it. Call me crazy, but I did everything I needed to do in it quickly and easily.
Upon seeing the future of imovie with its latest release, I decided that instead of getting the new imovie, which I don't like, I would take the opportunity to upgrade to Final Cut Express instead. So I am transitioning my workflow from imovie to FCE.
Here's my current question: I have started to shoot footage for my latest film. Previously, in imovie.. I would then take all that footage and just import EVERYTHING into imovie. Since I shoot about 90 minutes of footage each week, I would just create a different imovie file, corresponding to each tape I used in the camera, so I'd have different files: week 1, week 2, etc. This allowed for ALL my footage to be in the computer in a way I could find things easily and not leave anything on the camera. Then I would edit down each week, once it was done I'd export that "sequence" and when all the sequences were done, I'd pull all the pieces into one new imovie file to do the final assembly, sound work, etc.
So what do you all recommend for switching over to FCE? In looking through the literature, it appears FCE stores all the video elements for all projects together, rather than in my weekly individual files. TO me, that means I have one file reference over 30 hours of raw video footage and that just makes me uneasy. So... do I do what I have always done and just import everything into FCE and then edit afterwards, or do I do a "first round" of editing when I import so that I am only capturing what I think I will use? What will give me the least amount of headaches come mid-October when I start to plow through all this footage and put the film together?

Steve,
You can do it just about the same way in FCE, although there are some subtle differences & siginificantly greater editing capabilities in FCE.
You will have to create an FCE project in order to capture video from your camera. However, once captured, the resulting clips (which are actually QuickTime files on your hard drive) can be used & reused in any FCE project - they are not locked to the FCE project in which you captured them.
So, for example, you could capture each tape individually same as you always have (giving each tape a unique name - that's important). Each capture in FCE will give you a separate file on your hard drive. Then, instead of having a different iMovie file for each tape, you will have a different file (captured clip, in FCE terminology) on your hard drive for each tape.
You can then create a new FCE project (if you want to) and import any/all of the captured clips, edit them together as you desire, and export the resulting sequence.
In an FCE project, however, you have additional capabilities beyond iMovie to organize your clips - because in the FCE Browser you can create Bins & Folders with their own names and then import & organize your clips into them. You also have the capability to create multiple sequences in a single FCE project, so you wouldn't necessarily have to go through the extra steps & aggravation of exporting intermediate sequences only to reimport them for further editing. Nested sequences in FCE are a very powerful way of assembling a finished project from intermediate sequences & clips.
I do suggest that you get a copy of Tom Wolsky's excellent book, Final Cut Express HD 3.5 Editing Workshop to help you get started with FCE.

New User Log-In Help

Similar Messages

Maybe you are looking for