New User need help... can't make any adjustments othe then presets and Tone Curve

Please Advise
Thanks

Not sure what you mean, but maybe you can try right-clicking on the Tone Curve (or other panel) heading and then check the other panels you want visible. In other words, in the Develop module, right-click next to the words "Tone Curve." Is that what you are after?
Edit: Or.... try the Window Menu and then click Panels and make sure the right panel is showing.
John

Similar Messages

New User need help, can't get installation completed

Got my new iPod, 30 gig, color, photo, etc last week. Put in disk to install software. It stopped during the middle of installation so removed disk and found it was scratched big time (I'm sure it was something I did). So, I went to website and downloaded the iPod user update 2005-11-17. Got it loaded and restored. Rebooted computer and all I get on my iPod screen is the "Do not disconnect". I uninstalled iPod software and did the installation, restored again and same thing. I have to think there is an easy solution to this, but I've read everything I can find and no answers. It would be SO nice if Apple had a customer service I could call as I'm sure I'm doing something wrong (and stupid). Anyone have any ideas? I got the iPod from frequent points with my credit card company, so can't take it back to local retailer. Please help, I want it to work so bad! LOL Thanks!

Hi Jimmy,
Please try the following :-
1. Eject your iPod from your computer
2. Press "select"+"menu" keys for reset, hold the keys until you see the Apple logo
3. Uninstall the iPod updater and iTunes by Add/Removal software
4. Downloand the iTune6 and iPod updater from apple.com again
5. Install both of the softwares
6. Open the iPod updater and wait until it asks you plug your iPod
7. Connect your iPod
8. Click the Restore on iPod updater
Good luck

I have one folder with several projects all of which Aperure can not find the original. I do not use referenced files. I can't make any adjustments like cropping etc. What can I do to print any of these photos?

I have one folder with several projects all of which Aperure can not find the original. I do not use referenced files. I can't make any adjustments like cropping etc. What can I do to adjust or print any of these photos? IO have no ther projects with this problem. My Aperture Library is automatically saved to two external drives.
Dick Koos

I have one folder with several projects all of which Aperure can not find the original.
Have you checked inside your Aperture library, if the original files are still there?
Try to find out, when the images in those projects have been originally imported, then open the Aperture library by ctrl-clicking it and using the command "Show package contents" from the pop-up menu. In the window that will open, select the folder "Masters" and browse the contents. You need to find the subfolder with the year you imported the images, then the folders with the month and the day.
Are your original files still there?
If yes, copy them to a folder on your desktop for safe-keeping, and then try, if repairing the permissions and the other Furst Aid tools will help Aperture to connect to these missing files again - see this link: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
If the First Aid Tools don't help, then check, if Aperture has moved the missing images to a "recovered folder". If not, reimport the images, you saved to your Desktop and use the Lift&Stamp tool to transfer any adjustment and captions to your reimported images.

Main iTunes screen: can't make any adjustments to select-deselect apps,etc

I'm helping a PC friend of mine. He has iPad 2, W7-fresh install, latest iTunes with iPad connected and viewing the contents on main iTunes screen, he can not make any adjustments to selecting apps (putting a check box next to app to include in next sync for ex.) He can not click on the mini ipad desktop screens for each page (along side the right side) to jump to different pages and rearrange icons. WEIRD! I've never seen this on the Mac side.
Almost seems like some type of permissions issue in windows...??? HELP ! ! !

solved it. He was working between 2 PCs and did not "Authorize" under AppleStore menu listing for this new PC.

HT4623 when i make software update my i phone shut down and it can't start it always Show the apple mark and then disappear i can't make any thing what the problem and what the solution thank you

Dear gentlemen:
i know how can update ios update but when i make update my iphone shut down and it can't start.
it always Show the apple mark and then disappear i can't make any thing i need know what can i do ?
thank you

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Very new user needs help setting up a three user network plus server

Hi,
I'm an owner/manager of a recruitment company in the UK and we use three mac minis in our office to run our recruitment software (on a filemaker database) internet, mail and MS Office 2008.
We currently use one of the mini's as a 'server' in so much that it has a external HDD attached and shared across the network. We use Airport Extreme to share the internet.
Although to begin with this set up has served us well the amount of data travelling across the network and the prospect of a couple of new employees starting has made me think it's time to invest in a network and server of some description.
With my very limited knowledge i'm proposing the following but would greatly appreciate some assistance from the forum users!
Install OSX 10.5.3 Server on one of the Mac Minis
Get an ethernet switch and cable the three minis together
Use the external HDD as a time machine backup and store all files on the 'server' HDD
Continue to use the Airport Extreme to share the internet over airport.
I have a couple of questions:
Can the Server computer still be used as a desktop or do we need to buy a new mini
Does this set up make the airport base station redundant
As we grow I would envisage enlisting the help of a specialist Mac IT support company but in the mean time any help would be greatly appreciated.
Thank you again in advance.

I would get something better specified than a mini to be my Mac OS X based server, and although you can run it as a desktop I wouldnt advise it.
You ought to go out and buy the book Mac OS X Server 10.5 Essentials - The only Apple-certified book on Mac OS X Server - which Ive found to be a godsend of a book in getting Leopard Server going. Make sure you get the 10.5 version. Im in the UK and got it from Foyles in London.
Your approach is fine, but Leopard Server isnt as plug and go as the rest of Apples products. In particular it just doesnt function correctly if you do not have working DNS before you start. Period. If you dont understand DNS in your office or If having read the book you find its too technical you might be better off buying a no-brand Network File Store/Disk or even a Time Capsule from Apple if its mainly shared disk space that you need.
Angus

Exporting from Numbers to Excel - New User needs help!

Hoping someone here can help me out, as I have searched the discussions and still haven't found what I'm looking for. I'm a new Numbers 09 user, and I love it. My experiences with Excel have been nothing short of frustrating, but with Numbers I feel like a spreadsheet wizard.
My problem is basically that I need to export my Numbers created sheets into Excel for use by clients that have not yet made the jump from PC/Excel to Mac/Numbers. This is crucial, as I just don't think I can build this sheet in Excel with the same type of success I have had with Numbers.
My Numbers document has five tables, a custom header graphic and a legend. When I export it to Excel, each table is put on it's own sheet, including the graphic and legend. Is there anyway anyone can help me export this properly or am I doomed to have to spend days learning Excel? Any responses would be appreciated. Thank you very much!
B

B,
It's a shame that you have become a Numbers user but are anchored to the Excel style of Sheet.
Separate Tables in Numbers will always become separate Sheets in Excel. If your clients don't have to write to the Excel document, why not send them a PDF of your Numbers document?
If you must furnish Excel documents to your clients, you're going to have to consolidate your five tables into one if you want everything to come out on one Excel sheet.
Jerry

Data base problem-new user need help

im new user and trying to insert data base to my page using
"asp.net c",i get connetction to my data base but when i try to
build a form ,and then preview him i get ,the following message
Server Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a
resource required to service this request. Please review the
following specific parse error details and modify your source file
appropriately.
Parser Error Message: File or assembly name DreamweaverCtrls,
or one of its dependencies, was not found.
Source Error:
Line 1: <%@ Page Language="C#" ContentType="text/html"
ResponseEncoding="iso-8859-1" %>
Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
%>
Line 3: <MM
ataSet
Line 4: id="DataSet1"
Source File: e:\inetpub\wwwroot\Untitled-1.aspx Line: 2
Assembly Load Trace: The following information can be helpful
to determine why the assembly 'DreamweaverCtrls' could not be
loaded.
=== Pre-bind state information ===
LOG: DisplayName = DreamweaverCtrls, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=836f606ede05d46a
(Fully-specified)
LOG: Appbase = file:///e:/inetpub/wwwroot
LOG: Initial PrivatePath = bin
Calling assembly : (Unknown).
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file
(E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from
E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: DreamweaverCtrls,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=836f606ede05d46a
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET
Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET
Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.EXE.
Version Information: Microsoft .NET Framework
Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
I know its probably something stupid ,so u can lauph,but i
realy cant fix it.
need help
tnx for advance

anyone? please help

New User,need help, charging, using, everythi

I recently bought a Zen V Plus and have no tech savy so need help. I've checked with support but don't get th answers I need so thought someone here could help. Here are my questions.
1. Is there anything else that can be used as a charger besides a Zen product. I have several cell phone chargers both for house and can, can any of these be used? need to save money
2. Can the Zen be used while charging? All I get is the docked message and nothing else?
3. I use my player mainly for audio books and the battery doesn't hold for a whole book so I have to charge but when I do the book goes? back to the first part instead of holding my place. I do I hold my place?
Anybody that can give me simple clear answers please help. Because of my age I have trouble reading and the player allows me to enjoy books but I have trouble understanding how to make it work. Don't laugh but my 3 year old grandson would probably have better luck with getting it to work.
Thanks for any help provided

Li'vewolf,
First, no three year old will do better than you can with the player. That said, spend some time reading the tutorials listed under support at the top of this page, and use the search in this forum to find everything you can about the Zen V Plus.
When I shut down my Zen V plus, while reading my current audiobook, I just hit the pause button and then pull down the slide button on the left for "shutting down". Some of my books seem to do better with just a shut down instead of pause first. I have found that the bookmark feature is more trouble than it is worth. I use audiobooks from NetLibrary and Overdri've and a few extra from a forum on audiobooks. It seems that they all work differently when shutting down and holding a place.
Anyway, spend some time trying different methods of bookmarking. The Zen V Plus is fairly forgiving player.
Best Wishes.
luvmyrescuedogs
One more thought for recharging your battery. Try Amazon or eBay for a recharger, if you can't afford the Creative charger, but remember that you can fry the player if you use the wrong one and the warranty doesn't cover that damage. The easiest and cheapest way to recharge is to use the computer.

New User needs Help...

Hello Everybody!
I am MetalheadGautham, a guy who has been using linux since May 2007, and linux made me what I am - a guy with an attitude, from a n00b who couldn't use his brains thanks to windows. I migrated from Ubuntu 7.04, my first distro, to Ubuntu 8.04 on may 2008 then within a few weeks, I got rid of that horrible piece of bloatware. Then I installed Debian Lenny, and then migrated to Sidux in just a couple of days, when I heard lenny was about to go on a suspended animation soon.;)
I installed arch a week back, since even debian sid was proving too slow for my hardware, and I think its the best linux distro ever. Period. Its so simple to use, everything can be done so very easily, that I think even Ubuntu was much much harder to use than arch. But I still have lots of unsolved issues, since I am still a newbie (depending on how far you stretch the defination of the word "newbie").
1. Hardware
I have a Pentium 4 "Prescott" 2.66GHz processor (not the HT technology model), 256MB DDR 400MHz RAM, Intel D915GLVG motherboard with onboard Intel GMA 900 Video and RealTek ALC880 Audio. I hope you see that this is certainly not the best system in the world... I run KDEmod on this. So far, except for Firefox hanging, I have found no issues. Any advice on running arch on this ugly baby ?
2. IceDE
I am trying to create a full DE using IceWM, called IceDE. I want to make lightweight easy to use apps, either simple commandline like nano or curses based terminal apps or light gui apps available for use on this. So far I use EmelFM as file manager, DFM for desktop icons, nano for text editing and xterm for terminal. I need some more apps, mainly a media player. Please suggest a good light weight all-format-supported media player for this environment.
3. AUR and Pacman
I need a good GUI client for Pacman. I heard of aorut or something. How good is it and is it a native KDEmod app ? And is there a simpler way to install stuff from AUR other than visiting the site each time ? Is there some AUR client ? And does anyone know some good commandline pacman game ?
4. Konqueror issues
Konqueror can't use WYSIWYG editing mode in vBulletin. If I press and hold the down arrow in a text box, I can't reach the end of the text I am typing. I need some adblock filters for doubleclick, ad.yeildmanager, google, yahoo, etc. Please help. I want to replace firefox completely.
5. Doccumentation
Can someone please link me to some good .txt files containing well formatted doccumentation I can read with less while in commandline mode ? I need all the doccumentation I can use, since without that as a newbie I can get seriously screwed on this distro. I want one for newbies, pacman, kdemod, aourt, AUR, fstab, rc.conf and most importantly, kernel compiling. Files with formatted coloured text to help see things more clearly will be welcome. And why doesn't arch place the doccumentation files anywhere in the OS after installing ? I had to copy the wiki manually via another live CD to my /home directory in order to finish my configuring.

rooloo wrote:
3. AUR and Pacman
I need a good GUI client for Pacman. I heard of aorut or something. How good is it and is it a native KDEmod app ? And is there a simpler way to install stuff from AUR other than visiting the site each time ? Is there some AUR client ? And does anyone know some good commandline pacman game ? big_smile
it's not GUI and it's called yaourt. Fortunately you only need to visit the AUR once and use makepkg to build yaourt. Then once installed you can use yaourt like pacman and install stuff directly from AUR using yaourt in terminal. Yaourt is a wrapper for pacman that gives AUR functionality.
5. Doccumentation
You could try
man man
man pacman
man yaourt
man rc.conf
man fstab
or how about the wiki? Did you see the links at the top of the page?
http://wiki.archlinux.org/
yaorut ? I guess thats the one. I don't need GUIs. I just need something better. I am pretty comfortable with commandline.
rooloo wrote:
btw,
makepkg, AUR, and ABS are discussed extensively in the wiki.
yes they are, but I need text only version browsable from commandline init 3 using less. And man pages don't make the cut - they are not sufficiently newbie friendly since they lack advices and tips.
skottish wrote:
Welcome to the forums MetalheadGautham.
Most WMs will get the best out of your system, including Ice. Openbox is a good choice here at Arch. You'll get tons of helpful advice for that one; Just about everyone loves Openbox here. I've used E17 on a machine with far lower specs than yours with excellent results. In fact, it's all I use on both of my computers. Just don't use the default theme, you'd be at risk of random vomiting!
As far as a media player goes: Xine is very lightweight and can play most formats. Mplayer and VLC are a bit heavier but play more formats, and both will do well on machines less powerful than yours. MPD is a great choice for music. I use Sonata as a front end and love it. The combination is extremely lightweight.
IceWM is simply THE LIGHTEST I have ever seen. It uses lesser ram than fluxbox which uses lesser ram than openbox. Along with that, its got great features - flag+space to run a command of your choice, a network monitor, a cpu load monitor, a tray, workspaces, easy to edit menus, etc. Its simply THE best. Thats why I didn't install the LXDE based OpenBox and decided to create my own IceDE just for the fun of it.
I have been thinking of Xine MPlayer and VLC, but I need something commandline. I remember that launching vlc via (I guess) ncurses-vlc or something launches the ncurses version. I don't know the same for MPlayer and Xine. Which uses the least resources while in commandline ? And I don't want mpd since I want to keep things as simple as possible, with ONE APP PER TASK approach.
mcmillan wrote:Since you asked about a gui app and yaourt isn't what you're looking for you might want to look at shaman. It's made by the same people involved in making kdemod, and they've done a nice job of integrating it with kde4.
Sounds good. But I doubt I will be using it most of the time since I love working from init 3. Is there a (n)curses client for pacman, the way aptitude exists for apt-get ?
Square wrote:When it comes to hardware, you're ok on everything. I would suggest upgrading your RAM if you get a chance however, for 256MB could put you at a snag every once and a while (Especially if using a DE). About 512MB is perfect IMO, for a basic desktop, and could greatly improve overall performance.
I am thinking of getting myself another gig of ram on 2nd of august (the sunday). Will it help run KDE4 without issues ?
And will my onboard gpu become better if I up its vram from the current 12mb to 192mb ? (after adding a gig ofcourse).
peets wrote:I suggest that you learn to enjoy your shell (bash, zsh, fish, ...) It's my quick and scriptable file manager. I find it fun to use.
I am trying... its fun... but I have still not managed to COMPLETELY replace a file manager with the shell due to various obvious reasons (like speed while using).

New User: Needs Help with getting started with the Z

Hi, my son got a creative Zen for xmas, only getting round to getting it together now, and having some problems with the manual. All this is new to us -technology etc. We have managed to rip a CD but cant get any further! Downloading from internet sounds like such a good idea, but 'know-how-to do' seems light years away in this house! Is there an easy start manual or step by step directions that I've missed out on somewhere? the quick start manual is fine for learning how to use the player but doesn't give any info on ripping CDs and whatever comes after. Can any of you 'experts' bring yourselves back to the begining and explain what to do in simple english?
Message Edited by Jeremy-CL on 02-0-2005 0:25 AM

Mother,
I moved and edited your message as your are more likely to get help out here. As far as suggestions go for downloading from the internet goes, there is not a lot of difference between getting it from CDs. The main difference is the process of actually getting the music.
First off there are several music stores out there and some that are free. Here are a few suggestions (this is all personal knowledge, this is not an official endorsement of any of these):
Napster - Integrates into Windows Media Player if you desire and can transfer directly to most Zens. Also allows a user to subscribe to an account that allows for streaming and computer only downloads of music (must purchase song to transfer to the player...usually around .99 a song)
Buymusic.com - Website interface that sells individual tracks and albums.
Wallmart music store - Website interface that sells individual tracks and albums.
There are others but these three are the mains ones (outside of itunes, which is designed for the Ipod).
Basically once you download them, you go into MediaSource or Windows Media Player and add the files to the music library. Then you just transfer like you do with CDs.
JeremyMessage Edited by Jeremy-CL on 02-0-2005 0:34 AM

New user needs help with Email account questions

Good day - I have been a 10-year user of Blackberrys (Curve, Bold, and earlier models). Just received a new Q10 for work. Enterprise Outlook synched up and I am getting all emails, calendar, and contact information as in the past. All good with this. Here are my questions I cannot find answers to anywhere:
1) How can I insert a "signature" with emails I compose from Q10?
2) How can I delete all emails on Q10, rather than one at a time?
3) How do I set the Q10 to only delete from phone and not network. In other words I only want to delete emails from the Q10 device and not my PC.
Appreciate any help. Thank you,
Chris

#3 is even easier
Go to Hub settings, then display and actions and drag down, you'll see the option 'delete'.
Regards.
Blackberry! Here, now, forever!

Need help can't make purchases

I keep getting pop up to contact support apple i tunes when trying to make purchases in game! Need help please!,

You need to do what the message syas. Contact support.
https://expresslane.apple.com/Issues.do
They are the ones that can only help you with this

Need Help - Can't Import ANY Images into LR4.4 Since OS Upgrade

I can't import ANY images to LR 4.4 since upgrading my Mac OS to Mountain Lion 10.8.3 this past week. I downloaded LR5 Beta and all works well. I deleted LR5 Beta to see if it was conflicting with LR4.4 somehow and rebooted. Still no change. I can't import from my card reader (that says it can't even read the files) or from a location on my hard drive. I am beyond lost and frustrated.
The error message for importing is "Could not copy a file to requested location."
I need ideas. I am afraid to deleted and reinstall as I don't want to lose all my folders within. I looked all over the web and can't figure it out.
If you need any other info, please let me know. I am hopeful that someone can help me.

I added LR5 again and that works perfectly, but LR4 is still not working properly. I opened the preferences and catalog settings to compare...and they all look the same. I am beyond baffled. I don't plan on dropping more money for LR5, so I need LR4 to get back to working properly.

New User Needs Help with Linux OBIEE Install via Terminal

Hi All - I'm installing Linux OBIEE. I'm on a Mac and thus can't use the GUI install option. I've unzipped the tar and now am stuck. Where do I need to be on my server (I know not root) and what command do I use to actually install OBIEE. I've tried setup.sh but it's not working properly and thus I am assuming I'm doing something incorrectly.
Many thanks for your help.

I can use my mac for installs but prefer to use a VNC Server session on the Linux box and a VNC Client on the mac to do remote installs as it survives network bumps.
If you want to use your mac as an XServer to do the install you have to have X11 installed (have a look at http://developer.apple.com/Darwin/runningX11.html)
Edited by: mcharchu on Aug 11, 2009 5:37 PM

New User need help... can't make any adjustments othe then presets and Tone Curve

Similar Messages

Maybe you are looking for