New User Question: How do I enable comments in Reader when this option is greyed out on my menu?

I cannot figure out what I am missing here. I have a PDF Portfolio completed and now want to E-Mail for Review. But this option is greyed out on my Comment Menu dropdown list. What to do? Thanks!

Two Places to Check
In iChat in the Video menu (May say Audio) to the right of the Buddies one there is Camera Enabled. It should show a tick next to it.
Next in the View Menu the Show Video Status item also needs a tick.
If those two items are ticked then go to the Apple icon top left > About this Mac > More Info button to open the System Profiler.
Use the reveal Triangles and go to Hardware > USB and see if the camera is listed.
8:33 PM Wednesday; April 23, 2008

Similar Messages

How do I turn location services on when the option is greyed out?

I cannot turn the setting on. I have tried adjusting the restrictions settings as well. Help?!?!?!?!?

I had the same problem.
Going to Settings > General > Reset > Reset all Settings
re-enabled the location services. You'll have to go disable manually the ones you don't want on, maybe to save battery power, but this worked for me.

How can i turn off passcode when the option is greyed out

how can i turn off passcode in iPhone 4S when the option is greyed out?

You can't. Do you have an Exchange account on the phone? If so, the ability to disable the passcode can be restricted by a profile installed when setting up the Exchange account.

New User Question - How to Sync Sent Messages from Bold 9700

I am running BlackBerry Desktop Manager 5.0.1.37 and the 'Reconcile Email Messages' option is disabled and 'Email' is not mentioned in 'Configure Sync'. I have a BlackBerry non-enterprise data plan with my carrier. My computer is running XP PRO sp3 and Office 2007 is installed My question is how do I sync the sent messages from my Bold 9700 back into Outlook 2007? Thank you in advance.
Solved!
Go to Solution.

allanc wrote:
An alternative (for me) would be to *always and automatically* send a bcc to a specifc address of all my sent messages.
I cannot locate this option in the documentation.
Does it exist?.
Yes, in your BIS account setup for that email address. Edit the setup and you will see at the bottom a checkbox to automatically BCC messages.
Then, on your Outlook, set a filter for your incoming messages from yourself to be re-directed to your sent folder.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I enable my camera when the option is greyed out in iChat?

This may be a dumb question, especially as I only 'converted' to Macs 3 days ago... but when I start iChat the option to enable my camera is greyed out (it wasn't this morning when I checked) - what have I pressed to disable it and how do I re-enable it?
I have a MacBook Pro with a built-in camera (bought 3 days ago strangely....)
Thanks for any advice you can offer

Two Places to Check
In iChat in the Video menu (May say Audio) to the right of the Buddies one there is Camera Enabled. It should show a tick next to it.
Next in the View Menu the Show Video Status item also needs a tick.
If those two items are ticked then go to the Apple icon top left > About this Mac > More Info button to open the System Profiler.
Use the reveal Triangles and go to Hardware > USB and see if the camera is listed.
8:33 PM Wednesday; April 23, 2008

New User Question: How do I find ALL of my setting for my layout once I'm working on it?

I'd like to get screen captures of my settings for each project I do so that I have them for refference.
Thank you!!!

OK, I think you're basically on the right track, but I think converting your files to templates might be more useful than printouts. Templates contain the master pages (which is where margins and columns are typically changed from the defaults set during initial Document Setup (or they may not be changed from those defaults at all), all the styles defined for the project, and all the color swatches that have been defined, so you don't need to reinvent the wheel, only choose from among the available selections. They can also have page elements (headers and footers, page numbers, placeholder frames for standard layouts, etc.) predefined or in place.
You can make any file into a template just by saving as one (File > Save As... and choose Template from the file type dropdown), or by changing the file extension to .indt. The only functional difference between a document file and a template file is that when opened "normally" documents open as original, so you are editing the actual document, and templates open as an untitled copy, so you are editing the copy and won't accidentally change the template. You can delete essentially all the content (other than objects on a master page) from any file and save as a template and have everything you need to make a new file using the same parameters.
There are scripts available to tell you what styles are defined in a document (you can google for InDesign Style Reporter script, I think), and there may be others that will give you other parameters. There may be something like that in the Blatner Tools plugin, too. If you want one comprehensive script you may need to pay someone to custom write it for you, but it would be worth a trip to the scripting forum (InDesign Scripting) to see what is already written that might help you if you want reports.

I am unable to open a new tab in Firefox 16.0.2 - clicking the + does noting and the "New Tab" option is greyed out.

Unable to open new tabs - "+" button does nothing, "New Tab" option is greyed out in "File" menu and keyboard shortcut doesn't work either.

Hello JonnieW
check it in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#os=win8&browser=fx16 Safe Mode], in Safe Mode window select "'''''Start in Safe Mode'''''" and see if this happen again, '''if not''' see: [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems#os=win8&browser=fx16 Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Was playing game for months. Tonite, I went to play and it started me back as a new user. How do I find my player info and continue playing my origional game??

Was playing game for months, when I turned ipad on tonite and went to continue playing, it started me as a new user. My old achievements are still in game, but can only view them as the game recognizes me as a new user. How can I retrieve my player info to continue where I left off in game?

snozdop wrote:
If I bought a new iPad and wanted to continue as on the old iPad, I would setup the new iPad from a backup of the old iPad, thereby transferring everything from old to new.
Exactly, a full backup of the previous device would contain all the app workfiles that stored the current state of the game.
I'm thinking if your kids got ahold of the iPad and decided to start with a new/fresh character, it may not be possible to go back. Given that the device is not altogether geared for multiuser usage (Apple would rather everyone got their own), many games don't support multiple users, besides those on other devices when in networked multiplayer mode.
But hopefully they will answer and set the record straight. While you wait may want to interrogate the infractors on what they specifically did so you can provide details to the maker if they need them.
snozdop wrote:
Can be either iCloud or iTunes depending on where you chose to do your backups to.
I'm not sure iCloud stores everything. Even iTunes states that iCloud "Backs up the most important data..." whereas locally there will be "A full backup..."

How do I enable comments on an iWeb blog that is not hosted by MobileMe?

How do I enable comments on a blog that was created in iWeb and hosted by Go Daddy service?

You can install your own comment page using various methods...
http://www.iwebformusicians.com/iWeb/Comments-Password-Protect.html
Example...
http://www.iwebformusicians.com/iWebMusicWebsite/Comment.html
The alternative is to move your blog to Wordpress and retrieve all your comments from MobileMe before it disappears...
http://www.ragesw.com/products/iweb-to-wordpress.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

How do I enable the Move Option When Importing (It's Greyed Out)

Bonjour,
I am trying to figure out why Aperture 2 does not ask to delete photos from camera (Canon SD950 IS) after import or why the "move" option is 'greyed' out. I have searched the forums here and have only seen people offer advice why this is not good. Not to be an A##, but I don't want advice. I need an answer to my question. How do I enable this functionality? I know that it is technically possible as the simple app "Image Capture" that comes with Leopard does exactly this.(Imports then Deletes from my camera) It's just that Aperture cost too much money in my opinion to force one to use an external app to do what you want done, especially since it is not a difficult function to perform as evidenced by aforementioned app in Leopard. TIA.
Hardware: 17' Glossy HiRes Mac Book Pro 3.1 Intel Core 2 Duo 2.4 Ghz 4GB Ram
OS: Mac OS X 10.5.3 All updates applied
App: Aperture 2.1
A bientot,
William.

Please don't take the following as a flame...
<quote>The move option is grayed out when importing from a card to save you from yourself. At least that's what I've always assumed.</quote>
That's a bit draconian don't you think? Why have the option greyed out if you don't want the user to be able to do this. It's kind of like saying hahah, this is possible to do, but, you, the user, are a moron. Why even place the option on the page in the first place.
<quote>It just happens to be a bug that few on this forum care to see fixed because most of us feel that using it is unwise due to the danger of lost images and corrupted cards.</quote>
Again, why put it on page as an option if it weren't intended to be enabled in a plist somewhere for those who wish to be 'unwise.'
My logic is as follows: If Apple provides software that is more accessible to the 'unwashed masses' (because it's included with Leopard ie. Image Capture) and it deletes images directly from the camera, then why would a professional package (Aperture) limit the so called 'professional' from designing and using his/her own workflow governed by their own experience. Which could include first a backup to dvd or other device of your choice (keyword here: CHOICE) THEN import images and delete directly from the camera. Logically this is completely BACKWARDS, the app available to the 'masses'(Image Capture) should NOT let the user delete images directly from the camera and the 'professional' app (Aperture) should allow more flexibility for the advanced user who understands the implications of his/her work flow and adjusts accordingly.
Besides, And I quote myself "I have searched the forums here and have only seen people offer advice why this is not good. Not to be an A##, but I don't want advice. I need an answer to my question. How do I enable this functionality?"
Therefore, respectfully, your answer is: non sequitur.
Best Regards

Enable Commenting for Reader not working

I create a PDF file in Acrobat 8.1 and select Enable Commenting in Reader. However, the users open the file in Reader 9 and it doesn't work. I've been able to replicate this. And no matter what I do - save the file with a different name, in a different location, whatever - it never enables commenting. However, if I check the Security for the file in Reader it says commenting is allowed. I'm at my rope's end. This is how my users provide feedback so it's a really important feature for us.
Anyone know why this is happening? This was not an issue up until recently and nothing has changed (no upgrades or anything).

Thanks for getting back. I am uploading a sample of PDF in which I enabled commenting but when I open it in Reader the commenting toolbar is not displayed but when you go to properties it says commenting is allowed. I also checked to make sure the files were not be saved as archive files (it is set to never save files as archives).
I am also uploading screenshots of the process I follow to enable comments and of the Reader properties dialog that shows commenting is allowed.

I've just bought a new mac and I want to transfer the content from my old Macbook to my new. If I have iCloud enabled on both devices, is this simple, or is there a limit to what I can transfer? For example, can I upload word files to iCloud?

I've just bought a new mac and I want to transfer the content from my old Macbook to my new. If I have iCloud enabled on both devices, is this simple, or is there a limit to what I can transfer? For example, can I upload word files to iCloud?

iCloud is not the way to do this. You should use Migration Assistant - with this you can transfer your complete User folder from the old Mac including preferences and logins. You will need to connect the two with FireWire or USB depending on the models.
Ideally you should do this before you set up the new Mac - if you create a user account with the same name than the Migration will have to give the migrated user folder a different name. When you first switch on the new Mac it should ask you if you want to transfer your data, and give you instructions.

How do I share a new project on imovie if the export option is greyed out and not an option?

how do I share a new project on imovie if the export option is greyed out and not an option?

nicoleking wrote:
... I heard that if you bring in your old iPhone, they will give you a new one with some kind of fee, but I don't know how that works.
https://discussions.apple.com/message/22920500

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

How do you disabled it if running the same?

I have a new Macbook pro, I cannot get past the country selection screen. 'Continue' is greyed out and keys just make error sounds. How do I move it on?

I have a new Macbook pro, I cannot get past the country selection screen. 'Continue' is greyed out and keys just make error sounds. How do I move it on?

sideeque wrote:
I have the same problem. What did you do last time?
What should I do now? Its around 40 miles away the apple store? Would they pay my taxi fare to go and return?
How can we trust this apple product?
You are still under warranty. Call Apple Care.

New User Question: How do I enable comments in Reader when this option is greyed out on my menu?

Similar Messages

Maybe you are looking for