New User - Spotify hasn't shown any Facebook friends

I just signed up for Spotify via Facebook.  It seems to show me everything fine, artists, celebrities I can follow, apps, except for Facebook friends. I have Spotify exempted from the only firewall I use.  It just doesn't show any possible Followers from Facebook.  It only says:Facebook Friends on Spotify: There are no more people to show at this time. I've signed out and signed back in several times, the problem is persisting. **Update**A friend managed to link me to music, which linked me to her profile.  Facebook friends are still not being shown.

Spotify is going backwards! It isnt possible any longer to go through the friend list and select a friend and view his/her playlists and songs. Why is this SPOTIFY??? You are going backwards! The follow site is JUNK! Come on and give us our friend list back! There are no longer any reason for connecting spotify with facebook. The onley thing you get out of it, is that face lets people know what you are listening to in the top right corner.  And if you ask me this is a waste!!!!!!!! WTF spotify??? get a grip and make spotify what it once was, and let us brows threw our friends and their musik again!  with todays technology we are making, or at least trying to make things easyer, but not SPOTIFY. They are deliberately trying to make this part of SPOTIFY wourse! Thank you spotify for **bleep**ing up a totally perfect function!   

Similar Messages

  • I was trying to upload a video clip to iMovie and I got a popup saying that there was an upload error. I switched profiles, came back, and when I opened iMovie it said that it was uploading my clip, but it hasn't shown any progress and won't close iMovie.

    I was trying to upload a video clip to iMovie and I got a popup saying that there was an upload error. I switched profiles, came back, and when I opened iMovie it said that it was uploading my clip, but it hasn't shown any progress and won't close iMovie.

    Post in the iMovie forum. 

  • New user created doesn't see any data in reports

    Hello Everyone,
    I am using Hyperion Planning 11.1.2.1. I have a problem when i created a new user in the system via Shared Services. The reports are Reporting and Analysis reports.
    I duplicated a current user in the system and applied the same groups and provisions. However, the new user cannot view any data in the reports. The current user however is able to do so. I am quite literally puzzled.
    The existing user has been given the "Planner" provision. Further, the existing user has dimension security applied as well. This works fine with the existing user, as when i log in as the existing user, the data is available only to the groups and dimensions he has been assigned to. But when I apply the same groups and provisions to the newly created user, I get absolutely no data though i can see the report.
    But if I apply the Essbase Cluster: Administrator provision to the new user, all the data is viewable in the reports irrespective of the dimension security.
    I would appreciate some help urgently to get this matter resolved.
    Regards

    Hi John,
    Though the problem was solved last time, it returned. Users aren't able to view any web analysis reports.
    I dropped all users from SS and deleted all the security filters from EAS. (made a backup of course). Then I created all the users once again with relevant access to groups and the provision of "Planner" in the relevant planning application.
    Then in planning (Administration > Manage Security Filters > UserName > Create) created the filter for the user.
    When I did that, the default filter for the user was as follows.
    Access - None
    Member - @IDES("Accounts"),@IDES("Scenarios"),@IDES("Versions"),@IDES("ABCGroup")
    I want the user to have access to the Cost Center (Branch) L103. So I added the following.
    Access - Read
    Member - "Final","Draft 1","L103","Budget","Actual","Final Forecast",@IDES("Input Assumptions"),@IDES("Balance Sheet"), @IDES("Profit and Loss Account"),@IDES("Financials Ratio"),@IDES("Report Assumptions")
    This used to work, but for somewhat reason, it doesn't. The story is the same for all users. When i log in as a user and try to view a report, i get the "Database Login" - No data available error.
    Pls help.

  • Solver "quits unexpectedly." I am new user of the software. Any ideas?

    I'm new user of MacBook Pro. Just upgraded to Lion. I start Solver and get Excel to load, but get a screen saying "Solver quit unexpectedly." Details are available of the script file - very long. I have downloaded and installed Solver from company website - it was already on the laptop but tried that as a possible.

    Microsoft support forums:
    http://www.microsoft.com/mac/support

  • Check new user SB and pureupload ASP user

    Hello,
    ASP
    I was wondering has any one used the dw SB "Check New
    Username" with
    pureupload.
    I have a form with a textfield and a file field. I want my
    user to add an
    image and an SKU. I want to be sure the sku is unique, I want
    to use the
    "Check New Username" but I cannot seem to get it to work.
    I am calling the vairable like this in my check new user
    query
    UploadFormRequest("picrefsku")
    if any one has done this before or can add any input am
    grateful
    regards
    k

    this is the code for the check new user
    this UploadFormRequest("ininbutt") is rfom the form button,
    when the form is
    submitted then this should be finred, but its not the case.
    <%
    ' *** Redirect if username exists
    MM_flag = UploadFormRequest("ininbutt")
    If (CStr(Request(MM_flag)) <> "") Then
    Dim MM_rsKey
    Dim MM_rsKey_cmd
    MM_dupKeyRedirect = "ffff.asp"
    MM_dupKeyUsernameValue = CStr(Request.Form("ggg"))
    Set MM_rsKey_cmd = Server.CreateObject ("ADODB.Command")
    MM_rsKey_cmd.ActiveConnection = MM_connpeepeek_STRING
    MM_rsKey_cmd.CommandText = "SELECT imagesku FROM
    piddle.ps_usr_image WHERE
    imagessku = ?"
    MM_rsKey_cmd.Prepared = true
    MM_rsKey_cmd.Parameters.Append
    MM_rsKey_cmd.CreateParameter("param1", 200,
    1, 45, MM_dupKeyUsernameValue) ' adVarChar
    Set MM_rsKey = MM_rsKey_cmd.Execute
    If Not MM_rsKey.EOF Or Not MM_rsKey.BOF Then
    ' the username was found - can not add the requested
    username
    MM_qsChar = "?"
    If (InStr(1, MM_dupKeyRedirect, "?") >= 1) Then MM_qsChar
    = "&"
    MM_dupKeyRedirect = MM_dupKeyRedirect & MM_qsChar &
    "requsername=" &
    MM_dupKeyUsernameValue
    Response.Redirect(MM_dupKeyRedirect)
    End If
    MM_rsKey.Close
    End If
    %>

  • No password sent in GRC10 notification for new users

    Hi,
    I have a strange problem in our GRC10 system. 
    We send email notifications to users on completion of user access requests after provisioning is complete.  The notification contains the PROVISIONING variable, so new users should be notified of their initial password in the message.  This works fine on tests against our development system.  The email contains the user ID, the roles assigned, and the password information.
    However when the same process is followed in our Production system, the notification only contains the user ID and roles provisioned - no sign of any password information.
    We're currently running GRC 10.0 SP13.  The plugins are all updated to the same level.  We have the global provisioning configuration set OK, and all SAP Notes that appear to be related to the problem have been applied - but I still can't get emails to be displayed in the email notifications to new users.
    Can anyone offer any hints or suggestions to try?  I have even looked at password-related startup profile parameters as a last desperate straw.  I found 4 differences in settings between our Dev and Prod systems. would theses cause an issue?  the parameters were:
                                                                       Dev             Prod
    login/min_password_digits                               0                  1
    login/min_password_letters                              0                  1
    login/password_downwards_compatibility          1                  3
    login/password_max_reset_valid                     N/A                30
    That 4th parameter doesn't exist in our Dev profile.
    please help - I'm desperate on this one...

    Hi Ian
    I'm starting to run out of suggestions for you.I would probably put a trace on the RFC back to the GRC to see what the system user does. AS well as that check ST22, SM21 and SLG1 logs to see if any error. Already you've confirmed configuration and system match each other so it's down to data and security or program issue.
    In using the trace, may be able to identify the function module/RFC and then do a consistency check on the code to make sure nothing out of the ordinary there.  Depending on your background grabbing an ABAPer would help her.
    Also, as it's your production system do you have multiple app servers and load balancing in play? It's one area where your DEV and PROD may vary. Possibly the password is "leaving" the plug-in but getting lost in the nether as it goes to your GRC. I'm taking a complete stab here and showing my deficiency in Basis and System Admin.
    Otherwise, unless Marketplace has another correction not you probably need to raise an Incident.
    Regards
    Colleen

  • Any more news of the new Premiere Pro/AE updates shown at NAB?

    I'm sorry if this has been asked, but from googling, there hasn't been any recent news that I could find! Did they have an ETA on the new updates?

    The short answer is No.
    The most recent 'official Adobe' statement about PrPro next is here:
    Revealing the next release of Premiere Pro: Creativity just got a lot more colorful. | Premiere Pro work area
    But that was released pre-NAB so whatever you heard out of NAB is obviously more current.
    Other than that, the most timely info often appear in places like this:
    Adobe CC Video & Audio | Facebook
    So I suggest staying tuned to something like that, twitter, or this forum and you will no doubt as soon as it's publicly announced.

  • Any new user creation gets: unable to log into user account error

    Sort of reposting from http://discussions.apple.com/thread.jspa?threadID=2795507&tstart=0 as that initial question was answered.
    Anyway, running an xserve managing all network accounts (only local accounts are a local admin on each system). DNS checks out and all current users can log in fine. However, it seems any new user I create keeps getting this wonderfully ambiguous error. I've tried Guest (but figured it probably interfered with the Guest Account), Student (but thought it might be interfering with a group of the same name), Guest Student, and Temp User.

    Just making sure, you have selected the home location, and then actually pressed the "Create home" button? I have missed it few times and then wondered why it is not working. Then check the home folder location that it is actually there and created successfully.
    Yeah, and then hit Save!
    Message was edited by: VincensoXFIN

  • All of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any

    all of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any file or library that has anything to do with itunes except safari and quicktime are fine. im about to pull out whats left of my hair.

    Okay, that's got one thing ruled out at least.
    Can you check something for me, big? I'd like to see if iTunes launches with the Bonjour Service disabled.
    In your Start menu, right-click Computer and select "Manage".
    Expand "Services & Applications".
    Open "Services". (Perhaps maximise the screen to better see what's going on.)
    Right-click the Bonjour Service and select "Properties".
    In the General tab, set the Startup type to "Disabled":
    ... and click OK.
    Restart the PC and try launching iTunes. Does it open this time?

  • How do I open a web page in Adobe Reader from ipad2?  I don't see any buttons to click. I'm new user

    How do I open  a web page in Adobe Reader? I got the app for ipad2, but when a page says I need a certain version of AR, I don't know what to do. I'm a new user and don't know if I have to "open" AR and it automatically reads whatever doc I have up on the web, or is it always running and any web page I'm on should show a button to click in order to open the page in AR?

    If a website says that you need a certain version of Adobe Reader, it is probably attempting to detect whether or not you have the Adobe Reader browser plugin installed. This is something that only works on desktop systems where browser plugins exist. Since browser plugins don't exist on mobile, website developers should take care to present different messages and provide different options for downloading PDF's when visited by mobile browsers. I recommend contacting the website owner and requesting that they implement access for mobile devices.

  • When I open iTunes, I get a message that "iTunes has stopped working".  I've tried reinstalling itunes, creating a new user file, changing the startup programs, and am having no success in getting iTunes to stay open. Any "fixes" for this problem?

    When I open ITunes, I get a message that "iTunes has stopped working".  I have tried reinstalling iTunes, creating a new user file, changing the startup programs in accordance with articles in iTunes troubleshooting, but am having no success in getting iTunes to stay open.  Any fixes for this problem?

     

  • Any suggestion​s on creating a new user account please? (thinpad x61 tablet, Vista Business edition)

    I would appreciate any suggestions on creating/editing the user account on my second-hand thinkpad X61 tablet (running Vista Business) edition. I bought the laptop from ebay in Germany/Austria. When I switched it on, there were no options to create or edit a username. I have completed all the updates (Lenavo and Windows). I tried the following to add a new administrative account:
    1, Control Panel then selecting User Accounts. A screen appears for a second and then disappears. 
    2. I have also tried typing in sysdm.cpl in the command prompt, 
    None of the above worked, as the screen does not appear at all. I have also tried allowing the automatic updates on, that does not work either. I was wondering if this is managed by the Think Vantage system. Not sure if this is relevant, the Vista Business language was set in German and I added a language pack via Vistalizator to turn it into English.
    Any help with this issue would be appreciated. Many thanks in advance.

    Hello,
    Have you tried running the Local Users and Groups Manager (filename: LUSRMGR.MSC) to create a new user?  If so, were you able to create additional accounts through it?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • How to create a new user without any sample objects from any other user?

    Question as the title.
    I had the example dababase installed when I installed the Oracle database.
    Every time, when I create a new user, there will be some example objects coming
    with the new user.
    How can I remove these objects from the new user?
    Or, how can I create a new user without the example objects?
    Thanks in advance.

    I think the easiest way for you would be to use OEM.
    Just locate each object that you want to remove and right click->remove. Don't bother doing this for any indexes as these will be removed when you drop the corresponding tables.
    If you want to try command line through sqlplus then identify the objects you want to remove by selecting from the user_objects view while logged in as this user. This will give you the name and type of object. Then issue the relevant drop command.
    It's probably worth making sure you have a valid backup first, just in case things go wrong!

  • Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

    Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

    Question # 1 is what do you mean by "inherited"? Is this a case where the computer belonged to someone else? Your user would not be entitled to use a program licensed to someone else.

  • Both in safari and Facebook app. Likewise, can't see any Facebook contact pictures on contacts app. my softwar is up to date. my Facebook app is updated. please advise any solution to this. When you view it from safari, no pictures are shown and it looks

    both in safari and facebook app. Likewise, can't see any facebook contact pictures on contacts app. my sofware is up to date. my facebook app is updated. please advise any solution to this. When you view it from safari, no pictures are shown and it looks like html script texts. In facebook app, there are texts but no no images shown. thanks.
    iPad, iOS 6.1.3

    Where did you get the device?  Is it possible that it has an IT policy on the device blocking Facebook and/or Facebook options?  Look in Options >Security Options >General Settings (actual menu paths vary with OS version) and see if there is any reference to IT policy.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Maybe you are looking for