New user who has purchased Premier Elements but it is telling me I have a trial version

Hi
I'm signed in to my Adobe account, on my details it shows I have purchased the Premiere elements product, its on my desktop and I'm using it fine. But it is now telling me that my video I have created has been done using the trial version and its asking me to purchase it.
Any ideas?

Did you enter the serial number when asked so the program could activate?
Remove Trial Watermark http://forums.adobe.com/thread/433730?tstart=30

Similar Messages

  • When i want to send sms to my friend who has a imessage also, but the problem is when i have no internet in my phone it should be automaticaly send as a simple sms but in my phone even if i have no internet my sms will send as a imessage.

    When i want to send sms to my friend who has a imessage also, but the problem is when i have no internet in my phone it should be automaticaly send as a simple sms but in my phone even if i have no internet my sms will send as a imessage.
    Iphone 5c, ios 8.0.2

    And this is how iMessage works (as gdgmacguy tried to explain):
    Messages lets you exchange text messages with other SMS/MMS devices using your cellular connection, and with other iOS devices using iMessage.
    iMessage is an Apple service that lets you send unlimited messages over an active Wi-Fi (or cellular data*) connection to other iOS devices using iOS 5 or later or Macs using OS X Mountain Lion or later. With iMessage you can see when other people are typing and let them know when you've read their messages. iMessages are displayed on all your iOS devices logged in to the same account, so you can start a conversation on one of your devices, and continue it on another device. For security, iMessages are encrypted before they're sent
    * Cellular data connectivity requires iPhone or iPad (Cellular Models).
    If you are sending an iMessage to another iOS device that is registered to Messages, then it will send it as an iMessage unless iMessage is not available.
    GB

  • How to identify the user who has created accounts,lead, Opp in portal

    Hi experts,
    I am working in CRM 5.0 now i want to know the user who has created a particular account, Lead, and opportunity in Portal not in GUI kindly give some inputs regarding this .
    Thanks in advance
    Amar

    Hi Frederic,
    Thanks for your reply.
    But is there any way by which we can make it happen in PCUI.
    The customer is very particular about it. They use only PCUI to create new accounts and they want a facility to view change history in PCUI Account Application itself. They are not interested to go back to GUI to know change history for that BP.
    We have just checked whether any related BSP structures containing change fields are assigned to COMM_BUPA but not successful.
    Kindly help with a possible solution.
    Regards,
    Amar

  • Iphone 5C will not sent iMessage to another Iphone user who has not installed ios7

    I have found that if I am trying to send an imessage to another Iphone user who has not upgraded to ios7, the messages will appear in my history as "sending". I deleted that contact history and tried to send another text and it worked as it was sending as a "green message" rather than a "blue message".  Is there a way to work around this?

    Thanks for the answer.  Disabling iMessage does work, but it's a bit clunky to have to do that every time I want to message him.  Many of my other contacts have iPhones and I like the iMessage feature.
    He's had the same number for years and I only recently have had this issue, he doesn't have iMessage on any device, he only has an iPod nano.  I wonder what happened that all of a sudden it has defaulted to iMessage for him.
    Any other ideas?

  • How to disable via Group Policy - "Any user who has a password doesn't need to enter it when waking this PC"

    The setting can be found in the following location:
    From the “Charm” bar, Settings>Change PC Settings>Users>Sign-in Options> click the “Change” button next to “Any user who has a password must enter it when waking this PC”.
    I am looking to disable this option via Group Policy on our domain, but am unable to find a default policy related to this setting.  I am searching Group Policy on a Server 2012 machine, and in local Group Policy in Windows 8, but have found nothing. 
    Hoping I'm just missing the location of this and someone can point me to the right place.
    Regards,
    -BN

    There is no specific policy for this item. Please set “Require a password on wakeup” policy instead.
    Niki Han
    TechNet Community Support
    I'm using Windows Server 2012 R2, and I can't find the above quoted policy, and don't know where to anymore where to look. I searched for "Require a password when the computer wakes up", but it took me to the "Define Power Buttons and Turn On
    Password Protection" page of System Settings, but there's NOTHING there except the "When I press the power button".  I really want to stop having to enter a password every time I wake up the monitor screen.
    Capt. Dinosaur

  • TS2446 hi my apple id has been disable, as i has purchased more than 1000$ from app store and i have to update my apps and also i have planning to purchased more apps i will be appreciate if you activate my apple id. i am impatiently waiting for new iphon

    hi
    my apple id has been disable,
    as i has purchased more than 1000$ from app store and i have to update my apps and also i have planning to purchased more apps i will be appreciate if you activate my apple id.
    i am impatiently waiting for new iphone.
    i hope to buy many apps with this apple id and enjoy  them
    Viva Apple

    These are user-to-user forums, you are not talking to Apple here.
    Depending on why it's been disabled, you might be able to re-enable it via this page : http://appleid.apple.com
    Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • I have a user who has smartphone. He gets his email fro...

    I have a user who has smartphone. He gets his email from our server by having it setup on the blackberry email site. I used to go to the blackberry.com/go/vwz site but it is no longer available so I cannot manage his account. Please advise.

    Hi!
    To find all carriers BIS login sites, see here:
    http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to get a list of Local Users who has not logged in for 3 months or around 90 days

    hi
    i found this thread to pull out a list of local users
    Retrieve all local user accounts information on remote computers (PowerShell)
    however, i need to filter out users who has not logged in for 3 months or around 90 days, how can i do further filtering?
    i understand dsquery has an -inactive <xweeks> , however i am doing it for local accounts

    $ErrorActionPreference = "silentlycontinue"
    $([ADSI]"WinNT://$env:COMPUTERNAME").Children | where {$_.SchemaClassName -eq 'user' -and $_.lastLogin -gt (Get-Date).AddDays(-90)} | ft name,lastlogin
    using the sample from the link extendend with the 90 days criteria, the erroraction preference surpresses the errors you get for accounts with no lastlogon value (guest being a typical one)

  • I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution.  When I go to share the DVD to disc the form only offers 8pixels at the bottom.  How do I burn this DVD in HD with higher number of pixels?

    I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution.  When I go to share the DVD to disc the form only offers 8pixels at the bottom.  How do I burn this DVD in HD with higher number of pixels?  I have read other forums on burning HD DVD's but I do not see the option to turn the 8 pi into 40 pi the one forum recommended.  I want my DVD to be HD so I may sell these videos online for my business.  I can't sell them the low quality they are burning now.  Hopefully you can help me.  Thanks.

    desalvom
    Thank you for your reply.
    You cannot burn your high resolution video that you can view on your computer to an AVCHD on DVD disc
    that will replay through a regular DVD player. But players are marketed under a variety of names with
    different support opportunities. One manufacturer may call its product MultiMedia Player, media player, Blu-ray player,
    etc.The bottom line is the specifications for each of the players that are candidates for the playback of
    the AVCHD format on DVD disc or the format of interest.
    If you upload your HD (1920 x 1080) video to YouTube, YouTube converts the video to flash format, but it goes up as the HD video.
    But, beware. Look at the YouTube viewing setting when your uploaded video is playing back. The YouTube default is not
    HD. It might be 360p, 480p. If you have a 1080p video, then before the YouTube playback, you should be looking
    at the video with the YouTube 1080p HD setting for best viewing. That is a YouTube matter.
    Best results depend on you
    a. setting up the Premiere Elements project preset to match the properties of the source media. That means, if
    you have 1080p source, you (manually) or the project (automatically) set the project preset at
    NTSC
    DSLR
    1080p
    DSLR [email protected]
    or the PAL counterpart, depending on your region need.
    b. if you upload your video to YouTube using the Premiere Elements feature, there is a HD preset, but you cannot
    customize it.....if you need customization, then you can export your Timeline to a file...in this example
    Publish+Share
    Computer
    AVCHD
    with Presets = MP4 H.264 1920 x 1080p30 or PAL counterpart
    and then customize the preset under the Advanced Button/Video Tab of that preset. In increase quality, you might look to increase
    the Bitrate under Advanced Button/Video Tab settings - without compromising the file size.
    Then you would upload that file to YouTube at the YouTube web site.
    All of the above are factors that need looking into in order to determine the why for what you wrote
    I have published a shortened advertisement video to YouTube- say 5 minutes-
    and it is low quality
    Often SD video upscaled to HD can present poorly. But, you are dealing with a HD workflow so that should not be introduced into the matter. The setup of the project and
    the properties of the source video are important, but let us start with the above and rule in or out those considerations first.
    Thank you. As always, any clarification needed, please do not hesitate to ask.
    ATR

  • How to get the list of users who has access for list of tcodes.

    How to get the list of users who has access for list of tcodes.

    Go to transaction SUIM, this has a number of reports for users/authorisations
    open the Where used>Autorization Values>In Users
    and double click to execute
    in authorisation object, enter S_TCODE
    then press the "Enter Values" button
    It will offer entry boxes to put the transaction code you are interesed in.
    Then execute and the list of users with access to this transaciton code will be returned.

  • Generate a list of users who has admins rights in BO XI.

    Post Author: bstn82
    CA Forum: Administration
    Any one has an idea how to produce a list of users who has admins rights?

    Post Author: TAZ
    CA Forum: Administration
    launch query builder from the admin launchpad
    enter this query
    select * from ci_systemobjects where si_parentid=19
    this will give you a list of all the members of the administrators group.
    You can experiment with query builder and possibly ask for help in the DEV forum if you need to write a more complex query.
    Regards,
    Tim

  • How can I find out the list of users who has the access to IT 0008

    All,
    How can I find out the list of users who has the W R permission for IT 008
    for others?
    SUIM doe not look like giving me the correct results.
    Please advise.
    Thanks,
    From
    PT.

    combine tables AGR_1251 and table AGR_Users on keyfield AGR_USERS
    in tabel AGR_1251 select on Field LOW values IT0008.OR W OR R,
    noiw you get also other values
    So better solution run the query twice over AGR1251 first on IT0008 and secondly on values W OR R and then the result over table AGR_USERS
    Youu also might put an additional selection on object P* (only selecting HR objects)
    output wll be UID in table AGR_USERS

  • How do you assign the user who has logged in current session ?

    Hello,
    in oracle forms , you could assigned user who has logged in to any field , e.g field_name := USER_ID;
    I need to assign the user who has logged to a field in jdeveloper 12 . How do you do that please ?
    Thanks.

    Try this: https://www.google.com/search?q=adf+get+current+user
    CM.

  • How to find the users who has done the manual blockings in F110?

    I would like to knw the users who has blocked the inoice in F110 and even who has re-allocated the payment method/bank details in F110

    Hi,
    You can open the TC F110. Give the run dates and identification numbers then go to menubar systems- status.
    Which user has been blocked the invoice displayed.
    I hope it will help to you.
    Thanks,
    Venkat

  • How to capture the user who has logged into the portal.

    Hi,
    How do I capture the user who has logged into the portal.
    HOw do I retrieve the first name and last name of the logged in username.
    Could someone provide me a related link or PDF to work on this.
    Thanks,
    Suvarna

    Hi suvarna,
    Check the following code
    ISearchResult rst = UMFactory.getUserFactory().getUniqueIDs();
                      IUserFactory usf = UMFactory.getUserFactory();
                      IUser iuser = null;
                      IUserListElement userElement = null;
                      int i = 0;
                      while (rst.hasNext()) {
                            iuser =
                                  UMFactory.getUserFactory().getUser(rst.next().toString());
                            String email = iuser.getEmail();
                            String fname = iuser.getFirstName();
                            String lname = iuser.getLastName();
    regards
    Anil Dichpally

Maybe you are looking for

  • Error in opening .pdf files from the search results

    Hi All, When we do the search it displays the results, upon clikc the link of .pdf files it gives error "<b>File is damaged and cannot be repaired</b>". However, subsequent click on the same link it opens the .pdf file correctly. We are in EP50 SP50

  • Compare in Acrobat pro 9

    When trying to compare 2 text documents, Acrobat closes instead of creating a compare document. I can load the old and new version of a document, but when I click 'Compare', Acrobat closes down

  • Line item texts restriction for GL accounts

    Hi Gurus, I had lots of the Line item texts defined at the client level which can be choosen at the time of document postings.Can we restrict the line item texts with respect to GL accounts number to which we are postings.i.e.If I choose a particular

  • How to login first time in BO XI R2

    Hi, I am installing Business Object XI R2 server software in my system but I am not able to login it. So, what should I do for the same.?? Please guide me anyone...............

  • How do i create mailing labels for an avery template using pages

    how do i create mailing labels for an avery template using pages.