New user with mulitple issues
I just purchased PrE 9 and installed it a couple of days ago. My biggest concern is how much lag there is in the playback under the timeline view. I primarily use this for creating music videos. I have one video track for the stills and their transitions, one (and sometimes two) video tracks for the titles and their transitions, and an audio track containing the music. The audio track plays consistently, but the timeline generally has a problem keeping up and visually staying in sync with the music. I've used other video editors before and I've never experienced this problem.
I have also been experiencing multiple crashes while editing. So much so that I tend to have to save my work after each edit. This appears to be related to another problem in which I get a notice when starting up that I'm using a generic display driver and it will affect performance. At the start I was using a generic monitor driver but I replaced it with the driver specific to my monitor and yet I intermittently get these notices, and when I do the whole system seems to lag and overuse the CPU to the point I start getting warnings and eventually crash.
I've updated my graphics driver (Radeon x1950) and monitor driver so they are all current. I use a pentium 4 3ghz dual cpu with 2 gb of ram. I've been in touch with support and they want me to re-install the program. I'm hesitant to do that as apparently the installation process messes with the disk burning drivers to the point that I have to re-install my Primera Disc Publishing software for my Bravo SE printer/duplicator.
Anyone have any ideas or should I just abandon PrE at this point for another video editor?
A line may be red for two reasons:
1. You picked the wrong Preset so PRE cannot process it properly. If this is the case the line would be red as soon as you have loaded it.
2. You have applied some adjustment to a portion of your timeline (e.g. a Transition, Effect, or a scaling or changing opacity ....). These red lines mean that when you view your project in the monitor you are seeing a 'rough' version. If you 'render' those line by pressing [Enter] PRE will make a 'good' copy of that footage.
AHA!!!
This seems to be getting to the answer somewhat! I rendered as you mentioned and it cleared the lines and performed well, but at a pretty high cost in storage as would be expected. I've tried projects with AVCHD 720p square pixel and DV-NTSC. I'm somewhat flying blind without some clear references to understanding what project type would best suit me, so if you have any references, I'd appreciate it.
And give us some information about your clip and hardware:
* Use the *http://www.headbands.com/gspot/* to analyse the file and post screen image.
* What project preset did you use?
* Where did the clip come from?
* How did you get it into PRE?
* Post back here with the necessary information described here: http://forums.adobe.com/thread/459220?tstart=0
I've included a gspot screen capture of one of my .MOV projects. As mentioned above I've tried a couple of differnt project presets but I'm kind of flying blind on that issue.
I'm not sure what you mean by "clips" in that there are no real video clips in my projects. Each scene consists of a single still image on the video track which has a transition into it, a transition out, and on a secondary video track I have the titles with their own transitions. I coordinate these elements with an audio track which is a .WAV file. The clips (read stills) come from various sources on either the internet or digital photo. I bring them in via the organizer and drop them onto the video timeline where they need to be and adjust where it begins and ends relative to the audio track and add the appropriate transitions or fade-out/fade-ins.
In terms of tuning appropriate levels of software, as mentioned before this has all been done previously in trying to troubleshoot the problems. QuickTime and Windows updater are all up to current rev levels as are the display and graphics drivers. I use tune-up utilities 2010 in scheduled mode (nightly) which keeps my disks defraged as well as a clean and tuned registry and eliminates any temp files.
When I run PRE I've been putting the computer into Tuneup's Turbo mode which puts most background processes to sleep and turns off some of the more hefty Windows appearence features, so there's not much likelihood you'll find much wrong with the overally performance and maintenance on this computer.
The specifics of the computer are:
System Information
Time of this report: 12/27/2010, 08:35:50
Machine name: DAVES-COMPUTER
Operating System: Windows 7 Home Premium 32-bit (6.1, Build 7600) (7600.win7_gdr.100618-1621)
Language: English (Regional Setting: English)
System Manufacturer: Gateway
System Model: 830GM
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs), ~3.0GHz
Memory: 2048MB RAM
Available OS Memory: 2030MB RAM
Page File: 1515MB used, 2545MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: The file MAudioFastTrackPro.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Sound Tab 2: The file MAudioFastTrackPro.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: Radeon X1950 Series (Microsoft Corporation - WDDM)
Manufacturer: ATI Technologies Inc.
Chip type:
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_7240&SUBSYS_0D021002&REV_00
Display Memory: 1270 MB
Dedicated Memory: 511 MB
Shared Memory: 759 MB
Current Mode: 1920 x 1080 (32 bit) (59Hz)
Monitor Name: SyncMaster P2370(G)/P23700(G),Magic P2370G(Digital)
Monitor Model: SyncMaster
Monitor Id: SAM052A
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: DVI
Driver Name: atiumdag.dll,atiumdva.cap,atitmmxx
Driver File Version: 8.14.0010.0630 (English)
Driver Version: 8.56.1.15
DDI Version: 9Ex
Driver Model: WDDM 1.0
Driver Attributes: Final Retail
Driver Date/Size: 7/13/2009 20:14:55, 4030976 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-3100-11CF-C471-082DA1C2C535}
Vendor ID: 0x1002
Device ID: 0x7240
SubSys ID: 0x0D021002
Revision ID: 0x0000
Driver Strong Name: atiilhag.inf:ATI.Mfg.NTx86...1:ati2mtag_R580:8.56.1.15:pci\ven_1002&dev_7240
Rank Of Driver: 00F42001
Video Accel: ModeMPEG2_A ModeMPEG2_C
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
D3D9 Overlay: Not Supported
DXVA-HD: Not Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
Sound Devices
Description: Line 1/2 (M-Audio FastTrack Pro)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: USB\VID_0763&PID_2012&REV_0100
Manufacturer ID: 239
Product ID: 65535
Type: WDM
Driver Name: MAudioFastTrackPro.sys
Driver Version: 5.10.0000.5134 (English)
Driver Attributes: Final Retail
WHQL Logo'd: No
Date and Size: 11/9/2009 13:56:10, 158600 bytes
Other Files:
Driver Provider: M-Audio
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: S/PDIF (M-Audio FastTrack Pro)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: USB\VID_0763&PID_2012&REV_0100
Manufacturer ID: 239
Product ID: 65535
Type: WDM
Driver Name: MAudioFastTrackPro.sys
Driver Version: 5.10.0000.5134 (English)
Driver Attributes: Final Retail
WHQL Logo'd: No
Date and Size: 11/9/2009 13:56:10, 158600 bytes
Other Files:
Driver Provider: M-Audio
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
Description: Line 1/2 (M-Audio FastTrack Pro)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: MAudioFastTrackPro.sys
Driver Version: 5.10.0000.5134 (English)
Driver Attributes: Final Retail
Date and Size: 11/9/2009 13:56:10, 158600 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Description: Line 3/4 (M-Audio FastTrack Pro)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: MAudioFastTrackPro.sys
Driver Version: 5.10.0000.5134 (English)
Driver Attributes: Final Retail
Date and Size: 11/9/2009 13:56:10, 158600 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Similar Messages
-
How can i create a new user with only read rights ?
How can i create a new user with only read rights ?
You are asking about a Database User I hope.
You can look into the Oracle 8i Documentation and find various privillages listed.
In particular, you may find:
Chapter 27 Privileges, Roles, and Security Policies
an intresting chapter.
You may want to do this with the various tools included with 8i - including the
Oracle DBA Studio - expand the Security node and you can create USERS and ROLES.
Or use SQL*Plus. To create a
user / password named John / Smith, you would login to SQL*Plus as System/manager (or other) and type in:
Create user John identified by Smith;
Grant CONNECT to John;
Grant SELECT ANY TABLE to John;
commit;
There is much more you can do
depending on your needs.
Please read the documentation.
-John
null -
How to create new user with more than one default folder
hi
A new user created in OCS has only one default folder(Inbox).
I want to create new user with customized default folder.
for example:
a new user has more than one default folder(Inbox,Outbox,Draft,Dustbin...)
And also I want to automaticly enable the functions:
When sending messages, place a copy in Outbox
Keep message drafts in Draft
Move deleted messages to Dustbin
who know that?
thanksThe same reason that Apple and 3rd Party vendors put multi-size templates in one file I expect. I am trying to construct an in-house standard template for use in our company, and it is easier to manage if there is only one file to send to people rather than many - both initially and for subsequent edits / updates to the template.
Of course it would be possible to create several templates (one for each size). But since it is clear that templates can be combined, it appears sensible to do this - unless the doing of it is horridly complicated -
Create a new user with Privileges to execute Seeded API's
Hi,
We have a requirement from our client, they want to create a new user with Privileges to execute Seeded API’s,
So they dont want to execute using APPS user.
We want to know is it possible to have a new user for executing seeded API's and if so what all priveleges we need to have.
We are on 12.1.3 with 11.2.0.3 two node RAC Database on Exadata and Exalogic servers.
Waiting for your suggestions and replies.
ThanksHi,
Plz update this forum,
and give me a suggestion at the earliest,
Waiting for your valuable advice.
Thanks -
Hi all
I need to create new user with the following privileges :
1- access any table data (read only)
2- access the tables structure (read only)
3- access the tables relations (read only)
thanx in advanceHi,
giggs11 wrote:
I did the following :
create user youruser identified by yourpassword;
grant connect to youruser;
grant SELECT_CATALOG_ROLE to username;
but I cann't see my tables
there is no erroExample :-
Step 1:-
sql> Conn system/manager@orcl;
connected.
step 2:-
SQL> create user trial identified by trial;
User created.
Step 3:-
SQL> grant connect to trial;
Grant succeeded.
SQL>grant SELECT_CATALOG_ROLE to trial;
Grant succeeded.
SQL> grant select any table to trial;
Grant succeeded.
Step 4:
SQL> conn trial/trial@orcl;
Connected.
SQL> select * from tab;
no rows selected
Step 5:
SQL> select * from scott.dept;
DEPTNO DNAME LOC
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
Step 6:
SQL> desc scott.dept;
Name Null? Type
DEPTNO NOT NULL NUMBER(2)
DNAME VARCHAR2(14)
LOC VARCHAR2(13)
you must read about privileges..
http://download.oracle.com/docs/cd/B10501_01/server.920/a96521/privs.htm
Regards
S.Azar
DBA
"Question is Unquestionable"
Edited by: azarmohds on Aug 15, 2009 6:28 AM
Edited by: azarmohds on Aug 15, 2009 6:32 AM -
How to create full new user with all privileges
how to create full new user with all privileges?
and how to delete existing users?
Thanks in advance..Common solution is probably to use sudo for privilege elevation, wiki should help
-
I am a new user with i pad, I have an i phone with the app account tracker on it, I cannot get the information off my phone onto my i pad why?
iTunes: About iOS backups - Support - Apple
-
How do you change an used ipad to a new user with a new itunes account?
How do you cange a used ipad to a new user with a new itunes account?
plug your ipad to your computer, open your itunes, click on the ipad icon, at the first page there is an option to "restore" ipad to its factory settings, click it. Don't remove USB connection, wait until it finishes wiping the data and it should place a new window that asks you to register the ipad.
There you go, your iPad is sync with your itunes account under your name, its best to also use "Find my iPad" just in case it gets lost, you can track it from your computer. Very handy tool and its free!
But if you want the data that is in the iPad, back up it first and sync the content to your library before restoring it to its factory settings
Have a great day and enjoy your iPad -
How to create new user, with same personal files, for troubleshooting?
I cannot find this answer in "Finder Help", nor in the Community discussions thus far. What I must do to troubleshoot the spinnign beach ball: My next step: I must troubleshoot my friend's iMac running Mac O.S 10.6.8 by setting up a new user, called "Test". This I can do easily. However, what I am unsure of is this: as this "new user", actually just me as a tester, I must be able to access the same email, Word files, Desktop, photos, etc. that I used to access. How, then? Copy all into a shared folder or what? There must be a less cumbersome way. I do NOT wish to delete anything. Of course, I have justmade a perfect backup of everything on my hard drive. Please advise re my next step: sharing the "User" little house files, with myself, as the new, possilbly temporary, user. Thank you so much, anyone and everyone!
You shouldn't do any of that for troubleshooting. The test user account should be pristine. If you copy stuff from the old account, then you also copy whatever is causing a problem.
Just use the Accounts/Users & Groups preferences to create a second user called, "test." Make this user an admin user. Then log out of the old account and log into the new one. That's it. You can still access and use applications in the Applications folder if you need to test third-party applications.
We could be more helpful if you explain just what you need to troubleshoot. If just the spinning beachball is your issue, then visit The XLab FAQs and read the FAQ on resolving the SBOD problem.
If the computer is simply running slowly then read the following:
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to: OS X Maintenance - MacAttorney;
The X Lab: The X-FAQs;
The Safe Mac » Mac Performance Guide;
The Safe Mac » The myth of the dirty Mac;
Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
Auto-provisioning new users with GRC 10.1
There is some lack of clarity at my client on auto-provisioning new users into SAP systems with GRC 10. Here's what they want and I'm telling them they need SAP IdM.
The client will regularly have upwards of 500 new users on an on-going basis. These users are approved and created in Active Directory. The client believes that GRC 10 can now pick up these new users from Active Directory and then go ahead and provision them into ECC and CRM automatically, as soon as they're created, with no further approval required.
To the best of my knowledge, the easiest way to do this would be for IdM to do this, and have IdM trigger GRC for certain users, and to provision users who fall into this group of 500 users.
These users are different from regular users, who need to go through the approval workflows. Regular users will have managers and roles that need approval. These 500 or so users are approved to be created in the system and don't need to get caught up in the approval workflow.
Am I wrong in saying that IdM 7.2 is the best way to do this, or am I missing something about what GRC 10 can do?
Thanks for your help. I really appreciate it.Hi Santosh,
In AC 10.1, I created one brf plus initiator rule.Although I saved it in GRAC_ACCESS_REQUEST package.Transport button is not available(Not greyed).
Dis you faced this issue..How to get this change in transport??
PS:Application are activated.
Thanks,
Mamoon -
New user with strange font problem
I created a user account for my girlfriend...when she brought up the safari the google homepage had a strange grafiti font for all the text. (I say strange, but it's one of my many fonts in the collection) I opened up firefox and had the same problem...this morning I realized it was doing it in mail as well. Under my account (the admin and original account) there isn't an issue, but I've looked all over and can't find a setting to fix it for her account.
It's driving me nuts. Any help would be greatly appreciated.
15" Titanium Powerbook Mac OS X (10.4.8)..."I say strange, but it's one of my many fonts in the collection"...
Since it sounds like you know the name of the font, you could try to see if anything turns up with the command below, which searches through user preferences for a given string:<pre>defaults find "font name"</pre>A partial font name should be fine. Enter the command using "/Applications" > "Utilities" > "Terminal.app".
Also, the caches (associated with a user by the 'uid') don't appear to be cleared when an account is deleted. So if a new user is created and gets assigned a previously used 'uid', they may inherit the old cache files. For starters, try clearing out any file or folder whose name contains the user's 'uid', such as the "/Library/Caches/com.apple.IntlDataCache.###" file or the "/Library/Caches/com.apple.ATS/###" folder belonging to the affected user. Then log out and back in. To determine the user's 'uid', try:<pre>id -u username</pre> -
New user with query about hands free kit
Hi, new user to the forum so please bear with me.
I have recently got a Nokia 6303 Classic 'phone and was thinking about buying a CK-100 hands free unit.
Questions are:
1/ Are they compatible?
2/ Do you have to use the external speaker supplied or can you use the car stero's speakers?
3/ Is the hands free unit easy to fit?
4/ Does the hands free unit automatically mute the car stero, or, is it necessary to buy a piece of equipment to do this?
5/ When fitting the hands free kit do any other connectors have to be brought to connect to the car stero? If so, are they readilly available?
The car the kit would be fitted into is a Mondeo ST220 with standard Sony 6 CD head unit.
Thank you - SteveThe issue was all around Mobilme syncs and the solution to stop duplicates by choosing "all contacts" solved the problem here.
-
Setting Up a New User Account - iTunes issue
My wife and I were both using our Mac as a single user, but logging into iTunes under separate iTunes accounts to download our own music and apps.
This week I set up a new User Account in her name, and transferred all music and apps to her User Account so she would be able to access and sync on her own account, just by fast switching, rather than logging into iTunes each visit.
When she plugs her phone into the iMac to sync via iTunes, she gets the following message:
*iTunes could not sync information to the iPhone " " because another sync client is already running*.
Anyone had this problem and found a solution ?I recently had this same error message problem with my 3GS. Here's everything I did, one of the steps solved the problem...
1. Restarted with the phone unattached.
2. Repaired permissions using Disk Utility.
3. Restarted the phone. Here's where I had some difficulty: After swiping to confirm the shutdown, the screen went black, and I had the spinning icon that wouldn't go away. I ended up having to hold the lock and home buttons down to force shutdown the phone. I powered it back up, and it took forever to start, but it eventually did. I then power-cycled it one more time, and everything was back to normal.
4. Started up iTunes. Go into the preferences, and under the "Devices" tab, I found my previous backup. I deleted it.
5. Plugged in the phone, and everything was normal. iTunes made a new backup, so the sync took awhile, but it was successful.
Good luck! -
The setup:
We have the option "Password must: be reset on first user login" enabled in the Global Password Policy on our 10.9 / Mavericks server. We import new user accounts into Open Directory via a delimited text file and include a default password for each user.
What I've observed and tested:
When a user attempts to log into a computer that's bound to our Open Directory for the first time, they can enter anything in the password field and still receive the prompt to reset their password. They are never notified that they entered their default password incorrectly. The password reset will then fail (as it should), but they still aren't notified that this is the reason for the password reset failure. To put it another way: Seeing the prompt to reset your password would reasonably imply that you entered the default password correctly, but that's not the case at all.
The question:
Is this expected behavior? If it is, it doesn't seem logical. If this was the case in OS X Server 10.3 through 10.7 I never noticed it. Can anyone corroborate this with their own setup? Thanks in advance.
-- SteveSome follow up questions:
- How did you migrate (dsmig ldif or binary import)
- Did the accounts in .x have any custom password policies set?
For a "new" and a migrated entry, can you check if a passwordpolicysubentry is configured?
(search as directory manager and fetch the attribute) -
Create new user with objectclass
I've extended our schema to include an objectclass "lfcouser" with a parent of inetorgperson. We are running 4.12. I'd like this objectclass to become part of any new user that is created, how do I do this? I've researched the documentation any many websites and can't find an answer.
If creating a user from the console, from the Object menu, select New and Other. Scroll down the list to find lfcouser.
Maybe you are looking for
-
How do I... Set up an entirely seperate iTunes library for my kids?
I would like to set up an entirely separate iTunes library for my kids on the pc which currently has one iTunes library and everything we own collectively in it. There are some items not suitable for children (explicit music lyrics, "MA" or "R' movie
-
Problem in ADS configuration .please help me.....
HI experts, I am new to Interactive forms in WebDynPro for java. I have installed CE7.1 Dev_studio and J2EEServer.To Develop Adobe Interactive Forms i have installed Adobe Designer7.1. I am unable to Install a PKCS #12 Credential. B'coz to paste *.pf
-
I just wrote over a pages document and saved it by mistake, can I find the older version of the document?
-
I am having some trouble getting an image to be a hyperlink with the image and hyperlink component. <a href="lastpage.htm"> <img border="0" src="buttonnext.gif" width="65" height="38"> </a>Can this be done with the jsf components?
-
BADI For Transaction ME51N going to endless loop
Hi All, I have implemented BADI ME_PROCESS_REQ_CUSTand calling the set data method of it but the badi is going to an endless loop as the value for address number in delivery address is not retained. Any suggestions??? Asha