New v240, can't install or upgrade Sol 10

I've got two new SunFire v240 servers. They came running solari 10 03/05. OBP 4.18.10. I need to upgrade to at least update 2. The installer aborts every time.
I've tried installing via "boot net" or "boot cdrom" without sucess, both update 2 and update 3. After the initial round of questions about identifying the system, the installer just quits. I get a message that says I can run the script "Install_Solaris" if I want to restart the install process, but it still fails. Install log message says, "searching ctd0xxx for an upgradeable Solaris image".
This problem just feels like a newbie issue. If we just knew what setting to set, it would let us continue with the install. Any ideas?

Are you using media provided by Sun (manufactured commercially),
or are you using media that you created yourself onto blank disks ?
If these are "home made" disks, how did you create them?

Similar Messages

SPARC v240 can i install Solaris 10 and free Radius proxy software?

On a SPARC v240 can i install Solaris 10 and free Radius proxy software?

No, the patch was created on top of Solaris 10 packages. The patchadd utility requires that the VERSION strings match between the installed package's pkginfo file and the pkginfo files inside the patch. Unless the base package did not change between Solaris 9 and Solaris 10, the patch will not get applied because of the VERSION mismatch. But it is very unlikely that the packages did not change between the two releases.
Even if you were to be able to install it, there could be dependencies that the patch's binaries have on other Solaris 10 binaries.
-- Alan

How can i install iTunes upgrade 10.4.1 manually in win7

how can i install iTunes upgrade 10.4.1 manually in win7? i'm trying to do it but troubles occur every time i try (message after download: impossible to install due to an error, try to install manually from Tools menu) but where is the tools manu in iTunes?
thanks in advance for your answers

Go to iTunes.com/download and simply download then install the current version.

Install agent fail (Agent host must be registered before an agent can be installed or upgraded.)

I got the following error with trying to install agent
# java -jar agent.jar -d /u01/avagent/
Agent host is not registered.
Agent host must be registered before an agent can be installed or upgraded. Agent deployment failed.
database firewall ip address is 10.0.0.10 (for management) and 192.168.0.10 (for traffic source)
auditvault server ip address is 10.0.0.11 (for management)
I have 2 IP address on my DB 10.0.0.9 and 192.168.0.9
when i register host with ip 192.168.0.9 i will get the error
but if i register host with ip 10.0.0.9 installation is fine with no error
i want to monitor audit traffic on 192.168.0.9 interface which is for client to access so i need to register host with ip 192.168.0.9

hi Stefan,
this is expected behaviour, or at least it's better to say : in a multi homed system the choice of the network path that is used is determined by the underlying tcp network,
it doesn matter which path the sqlnet connection from agent to AV server takes as long as it is able to connect. Your statement about 'monitor audit traffic on 192.168.0.9'
does not make sense, the agent / collection framework is the part that fetches audit records from secured targets and has nothing to do with monitoring network traffic since
that part of the functionality is done by the firewall component. Anyway if you want to change the nework path you need to use 'route' and force it,
greetings,
Harm ten Napel

Do I need to need to uninstall old adobe flash before new version can be installed?

Do I need to need to uninstall old adobe flash before new version can be installed?

No, the Adobe installer will simply over-write the earlier version.
http://get.adobe.com/flashplayer/

Can I install an upgrade on a new computer?

On my OLD computer I have LR 4, which was an upgrade from LR 3.
On my new computer I har installed LR5 trial version.
Is it possible to buy an upgrade version to register LR5 on my new computer? I expect, I will be asked for ser.nr. for LR4? Then, will it cause problems that LR4 was an upgrade too?
Regards
Kasper

Thanks Victoria for that response. To clarify please:
I am getting a new computer which will move me from Windows XP to Windows 7. Now I can finally upgrade from LR 3 (itself an LR 2 upgrade) so I can get RAW support for my Olympus OM-D.
Can I do a fresh install on the new computer of only the LR 5 upgrade disk? It will simply ask for my LR 3 serial number and I'm good to go, correct? Thanks.
I think I'll order the Scott Kelby LR 5 book at the same time I get the upgrade ...
- Nelson

Can't install cs5 upgrade to cs3 on mavericks

I have cc subscription on my mbp2.5ghi5 2011 16gb/750SSD with 420 free. I tried to put my cs5 upgrade on the machine so that I could work with a new client who needs work in cs5. I couldn't install so I put cs3 back on the machine to give the upgrade software to " find". Still can't upgrade. I am running 10.9.2. CS3 installed fine, works ok, just put it there to get the cs5 on, and I can't get the upgrade installer to work. I can't wipe the 750SSd just for the sake of putting cs5 on temporarily, I need all the cs6 and cc software to keep working. I can't use the cleaner because it will damage the software I now have on there. Any ideas?

I am posting a screenshot.
Now matter how many times I restart, I get this message. i am in the administrator account. As a test, I tried installing on a 2009 mac pro with a traditional sata drive, and it installed without incident. Remember, I can't wipe my 750 ssd drive, I have too much invested in it and on it and I can't take the weeks to get the adobe cc suite working again.
Is there a reason it won't install on an ssd drive?

Can i install the upgrade ilife11 on TWO computers?

I bought the ilife 11 upgrade and installed it succesfully on my imac. Am I allowed to also install it in my macbook?

Do you mean is it possible, legal or ethical to do. Two of those have definite answers but seeing you are asking on a Apple discussion board, I can tell you the upgrade is for one computer.

New HD, can't install OS x

Installed a new 640 GB hard drive in my mid 2010 core 2 duo, 2.4ghz , macbook pro 13", Macbook Pro 7,1
Boots fine with install disk, 10.6.7 (not original that came with computer) After selecting the language to install, it says "can't install Mac OS X on this computer". options are restart or install from time machine (back-up).
This is being set up as a totally new computer so no back up exists.

You must use the computer's original disks or create a Mac OS X 10.6.4 or newer system on an external drive or through target disk mode from another Mac.
(73326)

How can I install Tiger upgrade on Power Mac G5?

I have PowerMac G5 with OSX 3.9. I bought retail disk of Tiger but it will not install as upgrade. It goes past the restart process but stops shortly after installation begins with message telling me that installation failed. I originally bought Leopard and encountered same problem and then bought Tiger thinking that I might need to upgrade to that first. Here are the specs for my computer:
Machine Model: Power Mac G5
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 1
CPU Speed: 1.6 GHz
L2 Cache (per CPU): 512 KB
Memory: 2.25 GB
Bus Speed: 800 MHz
Boot ROM Version: 5.1.5f2
Serial Number: XXXX
GeForce FX 5200:
Type: display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0321
Revision ID: 0x00a2
ROM Revision: 2060
Thanks much!

Hi Mobe!
Is the disc the Full Retail Version, of the Tiger Install DVD, that does not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on it?
If not, you can order the correct Tiger 10.4.x installer from Apple Phone Sales 1-800-692-7753, for $129.00.
That model of PowerMac G5 should also support the Leopard System Requirements, if you use a Full Retail Version of the Leopard DVD.
The Full Retail Version, of the Leopard Install DVD, can be purchased at The Apple Store (U.S.).
ali b

Can't install software upgrade to iTouch with 1.1.4.

I recently acquired an 16 GB iTouch that already had version 1.1.4, and I purchased the January 1.1.4 software upgrade to get email, etc.
I can see the purchase for the upgrade in my account, but it won't install the upgrade to my iTouch because of an unknown error OxE8000001. I restored the iTouch, but that didn't help. Every time I sync, I get the same error message.
Can anyone help with this?
I have read the help notes on the website; I'm on the home computer I normally sync on, I have iTunes 7.6, etc.

Well, I was hesitant to do that, since all the Apple info on the web said that you had to be logged into the account in which you purchase the software upgrade.
However, I found some additional info at this website: http://www.apple.com/support/ipodtouch/troubleshooting/ipodtouch/#
It suggested that if all else failed, try: Tap Settings > General > Reset > Erase All Contents and Settings
When I did that and restarted and sync'd, it finally downloaded by software upgrade!! Hooray! It only took me about 5 hours to accomplish this! Thanks for your help, Scott!

How can I Install BIOS Upgrade without windows installed

Hi Guys,
I want to Install BIOS Upgrade for Lenovo 3000 N100. The problem is i have a brand new hard drive, so i want to install it on command line after booting the system from bootable CD.
I have found all the BIOS updates on Lenovo site are Installer Packeges which runs on windows.
I am stuck, any help will be highly appreciated.
Cheers,
Ashik

I am Trying to update the BIOS on my G530-35U to 6get18ww (currently 6get17ww). I did not automatically install when I run the file 6get18ww, maybe because I did not have the battery in place (I forgot) all it did was to put all it's 17 files (BIOS.wph, mfc42.dll, ... winphlash.gid, etc.) in C:\DRIVERS\BIOS\6get18ww.
Are those files the ones you are talking about it?
Actually I will copy all but those txt files into a CD and I will try to boot from it.
otherwise I will just copy large size executable file BIOS.WPH other?
I will report here if I don't forget.
thanks

Can't install CS3 Upgrade on NEW iMac 24". An Imac DVD drive issue?

My CS3 Design Premium Upgrade CD fails to install Photoshop on my BRAND NEW iMac yet it is able to install everything else on the CS3 disc. I just bought this iMac yesterday and CS2/CS3 Upgrade are the FIRST things I installed (besides updates) when I turned it on. I'm still using 10.4.10.
I searched through the Adobe forums and the internet as to how others with the same issue have dealt with the problem, but it seems the most common reason is that people had installed Photoshop CS3 beta previously as well as older Flash/Acrobat plug-ins conflicting with the installation process. Further, these causes seem to be effecting Windows users.
So a few hours ago I tried to COPY the upgrade CD contents to my hard disk, I get the message:
"The Finder cannot complete the operation because some data in 'AdobePhotoshop 10en_US.dmg' could not be read or written. (Error code -36)."
This procedure of copying to the disk (and the resulting error message) is SPECIFICALLY addressed in the Adobe support pages TechNotes:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401429&sliceId=2
The page says that it may be a drive issue that is causing the problem. Of the 7 possible solutions given on the page, I've narrowed it down to only 1 option left (but I can't try it since I don't have another Mac!):
"*Solution 4*: Copy the software to the hard drive of a different computer.
*If the software copies successfully, the model of DVD drive on your original computer might not be able to read the DVD. Contact the DVD drive or computer manufacturer for any updates that might be available.*"
But what's funny (or annoying rather) is, I had a 20" Alum 2.4 iMac earlier this year (returned because of screen problem), and the CS3 upgrade installed without any problems on it!..??? And according to the iMac specs, the 20" and 24" models both have the same DVD drive make right?
Any ideas??? Are there other 24" iMac users who are experiencing similar problems? If not, then I guess I may have to return yet another iMac...which I'm reluctant to do since this screen is PERFECT! I'm scared to get another iMac with the dreaded screen gradient issue.

I just solved the problem.
I tried copying the DVD files to the hard disk about 7-8 more times. The last try SUCCESSFULLY copied to the disk and I was able to install Photoshop CS3.
Yay.

Error 1607 - Still can't install or upgrade to new iTunes

I was having various problems trying to remove the old version of my iTunes, however I over came those. I thought for sure once I got rid of the older version of my iTunes I'd be able to install the newer version. However that doesn't seem the case. I've updated my computer numerous times, turned off my anti-virus, and even tried downloading Quicktime seperately, which failed as well.
When I try to install the new version of iTunes on my computer, from CD or from the internet, I received the following error:
Error 1607: Unable to install InstallShiel Scripting Runtime.
I've tried the touble shooting on the following link:
http://docs.info.apple.com/article.html?artnum=93976
With no luck.
Can anyone help? All I want is to install iTunes to put music on my new iPod.
Thanks for any help!!

Ok this is what happenes.
I tried to "Reinstall the InstallScript engine"
However when I do so and type in the file path on my Windows Explorer I get the following Error:
Cannot find 'file:///C:/Program%20Files/InstallShield/Developer/Redist/Language20%Indpenede nt/i386'. Make sure the path or Internet address is correct.
"Running Setup from a virtual drive"
This seemed to work, I didn't receive any Error msg when I followed this step.
"Register Idriver and Msiexec" When I tried this step, again I received a Error msg:
"C:\Program Files\Common Files\InstallShield\Developer\7\Intel 32 refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the dick is properly inserted, or that you are connected to the internet or your network, and then try again. If it still cannot be located, the information may have been moved to another location.
When I try the 2. in this step I receive a box saying: An event was unable to invoke any of the subscribers.
"Change Permissions"
On this step I can get to the "Installer Folder" However when I right click there is not a security tab for me to click on???
"Stop other instances of Windows Installer"
Checked in the Processes and there wasn't another Msiexec.exe running.
Sorry for all the trouble, I'm so close to installing this, It's probably something really minor or stupid mistake on my part. Any ideas? Oh and FYI, I had a few Trojans on my computer, which I got rid of already....but do you think this could be a reason why iTunes won't install??
Any feedback helps, thanks once again!!

New Laptop - can not install upgrade versions of CS

Dear Sirs
I have bought a new notebook with WIN 7 and tried to install the prior versions of CS to be able to install CS 6 Design Standard.
I have installed Photoshop 6 - Creative Suite Standard and failed due to my system compatibility.
What can I do now?
I have bought the following licences:
Photoshop 6
Creative Suite Standard
CS 5.5 Design Standard
CS 6 Design Standard
Thank you very much for your reply and kind regards,
Susanne

Hi there, thank you very much for your kind reply.
When I try this, it says that there is no compatible version on my machine.
I try later on my old one to deactivate all adobe products and hope, that it will work then.
Cheers,
Susanne

New v240, can't install or upgrade Sol 10

Similar Messages

Maybe you are looking for