New valuvation group for existing valuation area - Account Determination

Hi Experts,
Existing Scenario :
-> Plant level valuvation is been maintained
-> Valuvation group code 0001 is assigned for all the Valuvation Area until now.
Req :
I need to set new account determination for a particular material type for the existing valuvation area.
How to achieve the same ?
1.Do I need to create a new valuvation groupcode and assign the same for the existing valuvation area ?
Your inputs will be helpful.
Regards
Prasath

Hi
For new Material type account determination there is no requiremnt of gioing for anew valuation grouping code.
You go for a valuation grouping code only hwen you need to trigger differnt g/L accounts based on the PLant combination.
YOu can go ahead with the existing account determination by maintaining the new account category reference & valuation classes to the new material type.
Hope this solves your query
Thanks & Regards
Kishore

Similar Messages

New BP grouping for existing BP role

Hi Media experts,
We have a requirement to add a new BP grouping for an existing role(Retailer- ISM001) which enable us to create a BP in the retailer role with a different number range. So we created new grouping and customer account group and assigned a new number range.The problem is that we created BP with the new number range but in change mode it shows only the general data.System not showing the company code and sales area datas.
Note: Integration is BP to Customer
Please give a solution
Thanks in advance,
Regards,
Srikanth.M

Thanks for your reply
As you mentioned we checked the configuration, but it is quite okay. We normally create BP with the same settings. You mean to say that we need to change the configuration under u2018Configure Field Attributes per activityu2019 for the new BP Grouping we created? Could you please explain little more about how BP Grouping (Newly created) links with the above mentioned customizing activity? Isnu2019t this customizing common in create, change display activity irrespective of BP Grouping?
with warm regards,
Srikanth.M

New Excise Group for Existing Plant

Dear CIN Experts,
We have query, as there is Change in Excise Group for Existing Plant, Question here is weather it is possible from functional part what will be effect on historical data and from CIN [Excise transaction] perspective and how to cope up with new excise related transaction like;
1) Sales Excise Invoice
2) Register Updates
3) Utilization
Kindly expedite from CIN perspective about the pro and cons for the same.
Thanks in Advance,
Ashish

Hi
For new Material type account determination there is no requiremnt of gioing for anew valuation grouping code.
You go for a valuation grouping code only hwen you need to trigger differnt g/L accounts based on the PLant combination.
YOu can go ahead with the existing account determination by maintaining the new account category reference & valuation classes to the new material type.
Hope this solves your query
Thanks & Regards
Kishore

Define new tolerance group for G/L accounts

Hi,
Where do define new tolerance group for G/L accounts?
Thank in advance.
Swetha

Hi Swatha,
Debit Account
Maximum Revenue Difference on Clearing
     Clearing differences in your favour are permitted up to the amount specified here. The amount always refers to the local currency. Differences up to amount specified are automatically posted by the system as increasing profits. To do this, the system creates new line items.
     In addition to the amount, enter a percentage rate in the Percentage field. The lower of the two limits applies. If you only want to use absolute amounts or percentage rates, you have to enter maximum value in other fields. Ensure that you define these limits for your G/L accounts and your employees. The lower of the two limits applies.
Credit Account
Maximum Expense Difference on Clearing
     Differences to your disadvantage are permitted up to the amount specified here. The amount always refers to the local currency. Differences up to amount are automatically posted by the system as reducing profits.
     In addition to the amount, enter a percentage rate in the field
     Percentage. The lower limit applies. If you only want to use absol amounts or percentage specifications, you have to enter maximum value in other fields. Ensure that you define these limits for your G/L account and your employees. The lower value applies.
May be this information is useful to you
Edited by: surya naveen on Jul 28, 2008 2:11 PM

Want to create new protection group for 2 members which are already under another protection group.

Want to create new protection group for 2 members which are already under another protection group. I have 12 servers under xyz protection group, want to move 2 members server to new protection group. How it is possible without loosing current backups.

Hi,
It all depends if the data source was originally co-located on the same replica shared with other data sources. If not then DPM will simple re-use the same replica and pick up where it left off. If it was co-located, then the old replica and RP
volume is shared and the RP's will expire as new ones are made on the new replica and RP volume created when it's re-protected.
Moving Between Co-Located and Non-Co-Located Protection Groupshttp://technet.microsoft.com/en-us/library/ff399045.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

HT201303 I have a new ipod added to existing laptop itunes account it is now asking a security question i have not answered help

I have a new ipod added to existing laptop itunes account it is now asking me a security question I have not answered - can anyone help please ?

Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
(88450)

I am upgrading from a 2nd gen ipod touch to a 4th gen ipod touch. Will I have problems syncing my new ipod to my existing itunes library/account?

I am upgrading from a 2nd gen ipod touch to a 4th gen ipod touch. Will I have problems syncing my new ipod to my existing itunes library/account?

Don't know why you would.
You can sync as many ipods/iphones/ipads as you like.

Adding new hard drive for Flash recovery area

i am adding new hard drive for flash recovery area. How i can make single directory on that flash recovery area & how i can test that i am accessing that rightly , to that directory & flash back recovery area disk?

Are you on Windows or Unix? And are you using ASM?
I'll assume you are on Windows....So after allocating the drive, you will format it say as F drive. Then you can create a directory T:\Flash. The parameter determining the location of the flash recovery area is db_recovery_file_dest. But you also need to set the size of the flash recovery area as well. After that's done. You can do your backups to Flash and see if the directory is populated.

Can we create new customer site for existing customers using custm interfc

Hi ,
I have a requirement :
version -- R12 .
We need to add new customer site for existing customers , is it possible to create it through customer interface with insert_update_flag set as U / I .
Any help in this is grate .
regards ,
Azzu .

I am pretty sure I've done this on one of my past project..
why don't you try it out?
Another route would be use customer APIs (TCA APIs)...which I am sure can achieve what you're looking for.
Edited by: James Kim on Mar 17, 2010 2:48 PM

Service entry sheet error.with new material group for services

Dear Experts
We need to create material group for roll shop spare parts service,we created a new material group.
when we are creating PR/PO with item category as D and a/c assignment K( entered cost center here).its giving error message
as RC= 3M8 47 Account determination for entry JSL KBS J001 not possible(while making service entry sheet)
after that i changed PR/PO and gave cost center and G/l account.now the service entry sheet is accepted.
is it necessary give G/L account manually,if user chose wrong G/L account how to avoid this problem.
please clarify me,
do we need to assign valuation class for material group for services?(where to assign)
or
should assign G/L account manually to cost center while creating PR/PO
Please clarify me
Regards,
Varun
Edited by: madhu varun tirupati on Sep 8, 2010 2:48 PM

Hi,
Option-1:-- >
Without creating material group and you can use your other service material group(existing service material group) and create a service master in AC03 as spareservice. Create a Service PO with text as roll shop spare parts service with other details as required like quantity of service, cost center & G/L account etc. After service being completed you can do SES in t.code: ML81N
Option-2:-- >
If you want report at the end based on different material/service group level, you can create a material/service group in OMSF for roll shop spare parts service and then you can assign to valuation class to material group in OMQW t.code. Then carry out regular process service order, SES etc.
Based on requirement, you can enter G/L account manually or can set default G/L account in purchasing document with help of t.codes: OMSK, OMQW, OME9, OMGO & OBYC
For error u201CAccount determination for entry JSL KBS J001 not possibleu201D, you cannot assign KBS transaction/event key to an account in OBYC t.code. Only you can assign G/L account to cost center with your CompanyCode in OKB9 t.code. Check the SAP note: 364570 & 106981
Regards,
Biju K

Applying new license file for existing installation

Hi experts,
I have installed Sybase ASE 15.7 SP110 Developer Edition (DE) on a VM running RHEL 6.2 for x86_64. Now my company purchased a license for Enterprise Edition and my manager sent me a license file (*.lic). Now I'm wondering if I can apply this new license on my existing installation. If yes, could someone point me to the detailed steps to do that?

re: lmutil lmhostid ...
Make sure you've sourced the $SYBASE/SYBASE.sh script before running lmutil lmhostid; also make sure you've sourced this file before trying to start up your dataserver and backupserver.
re: license 'upgrade' ...
Making quite a few assumptions (eg, this is a unserved license; the manager entered the correct hostid when generating the license; the license is appropriate for your vm in terms of license type and number of licenses; the new license isn't a subcapacity license; etc, etc, etc) ...
If your dataserver is up and running you can use the sp_lmconfig stored proc to change your license information. In particular you're looking to reset the edition type (PE) and license type (LT) settings to match the settings in your new license.
If your dataseerver is down/not-running, you can make the same changes by updating the $SYBASE/ASE*/sysam/<DSQUERY>.properties file. Using an ascii text editor (eg, vi) you want to change the PE/LT values to match what's in your license. [I typically go ahead and remove all of the lines that look like hex code values.] [Obviously (?) make a copy of the <DSQUERY>.properties file before you edit it.]
Where it starts getting tricky is when my list of assumptions are incorrect, eg, manager generated a served licensed (so you may need to setup a license manager), manager used the wrong hostid (in which case the license will need to be turned in and regenerated with the correct info), you've got a subcapacity license (in which case you'll likely need to make some other changes to the <DSQUERY>.properties files ... assuming the correct subcap license tag/id was provided when the license was generated), etc, etc, etc. [And you may want to find a few chickens ... for sacrifices to the SYSAM gods ... just in case.]

Help needed to generate new target group for contacts from BP Target Group

In CRM 5.0, we have a functionality in which say we have created a target group (T1) for 10 BPu2019s (organization) and each of these BPu2019s have one or more contact persons associated to them. Now if I want to create a target group for all these contact persons associated to the 10 BPu2019s, in CRM 5.0 I have the option to right click on the target group (T1) and then I get an option u201C generate new target group from contactsu201D. By doing so another target group for all the contacts associated to those BPu2019s will be generated. I am not able to find out the similar option in CRM 2007 (web UI) where in I can create target group for contacts associated to BPu2019s (organization). There should be some work around for this requirement.
Please let me know how to achieve this requirement.
Thanks,
udaya

Hi udaya,
we're also using that functionality in CRM 5.0. I think it would be worth a combined OSS message to get this functionality back in standard if it isn't there.
Best regards
Gregor

New Vauation Category for Spit Valuation

Dear All
We want to create new Vauation Category for Split Vauation.
However when I try to create new Vauation Category say Z by going to "Gobal Vauation Categories" and click create the new Vauation Category is not created.
I see a message that "No Changes are made"
Am I missing something here?
Regards

Dear All
The problem got resolved.

Valuation and Account Determination...

Hello,
Can anyone help me to get some of the functional implementing questions on "Valuation and Account Determinationa" ....
Thanks
Priyanka

Hi,
In SAP every movement of goods is followed by one movement type and movement type trigged transaction event keys. G/L account assignment and G/L account assigned to transaction event key (OBYC). GR & IR will updated by movement of goods only. In Account Determination, respective G/L accounts assigned to your chart of account,relevant to business transactions keys(Example:BSX,PRD,FRE,GBB),Account modifier(Example:BSA,VBR) and Valaution Calsss.If all are assigned then you would not face any problems during your posting of GR,IR etc..........
Configuration of Automatic Account Determination with T.Code are as follow:
1.OMSK: valuation Class with Account category reference,
2.OMWM: Active Valuation Grouping Code,
3.OMWN: Active Movement type with G/L account,
4.OMWD: Active Valuation Area,
5.OMWB: Active Chart of account,Valuation Grouping Code,Account Grouping Code,Valuation Class and G/L acocounts
In OMWB or OBYC
Click TE key and enter Chart of account and then save the Roles 1st for
1.Debit/Credit
2.General modification
3.Valuation Modif
4.Vakuation class
And then enter respective critetia for that TE key and save.
If assignment(Chart of account,Valuation Grouping Code,Account Grouping Code,Valuation Class and G/L acocounts are correct and u would not face any problems in G/GI/IV.
For more check the links:
http://www.sap-img.com/materials/general-test-of-sap-mm-knowledge.htm
http://www.saptechies.com/category/financial-accounting/page/0
http://e-mory.blogspot.com/2007/06/sap-mm-and-fi-doc-number-verification.html
http://www.sap-img.com/materials/sap-mm-configuration-tips.htm
http://moryhanry.com/sapmmfidocverify.html
http://www.sapcustomization.com/document/fi_mm_integration.pdf
Regards,
Biju K

New valuvation group for existing valuation area - Account Determination

Similar Messages

Maybe you are looking for