New Variant in VA05

Hi All,
In Transaction VA05 i need a new variant with following combination:
There are a variant named "Status and blockings
This new variant shall contain all claim sales order types, ZFA, ZRE, ZG2, ZG3, ZL2 and ZL3
Creations Date, Sales order number, item, material number, quantity, overall status for each item and reason for rejection, for this last field it shall be the text not only the two digit code
of reason for reaction.
How can i create above combination in SAP 4.6 version.
Thanks in advance.
Regards
ajit jaiswal

Hello Ajit,
That is a lot of information that you're looking to put into the report before running it. In your post you do not mention the need for sold-to party, so my assumption is that you're looking for this information for a specific sold-to number. What I would recommend is running the report for a variable period for all documents for the needed sold-to party. Then, once the report runs, set a filter on Sales Document Type for the listed SaTY's listed in your post, sort by creation date and filter any rejection reasons / material numbers / qtys / etc. Then, save this layout so that you can use the layout for any other sold-to parties you would like to additionally use.
Basically, VA05 does not have many options at entry, so instead of creating a variant to restrict the information you want pulled, I would recommend running it to pull all information in a date range for one sold-to party then creating a layout to restrict only the information you would like to see. Hope this works for you!

Similar Messages

New Variant creation in VA05

Hi
Can we create new variant in VA05 list of sales orders
Reagards
kkd

hi,
within Va05, you can create varaints.
If the "save display variant" option is NOT displayed, then this
is an authorization problem. To correct and be able to save user
specific variants, maintain the user parameter "SD_VARIANT_MAINTAIN"
through the transaction SU01 as follows:
   In order to maintain the parameter "SD_VARIANT_MAINTAIN":
    1-transaction SU01
    2-input the user-name and press the change button
    3-press the "PARAMETER" button
    4-under Parameter input SD_VARIANT_MAINTAIN with value "A" and save
Please note:
The values for parameter SD_VARIANT_MAINTAIN are:
       A - to be able to define standard or user variants,
       U - to be able to define user variants.
Once the change is made you will need to log on again to update.
If you would like to make this variant the initial variant, after you
save the variant, follow the same menu path but select administration
instead of save. Place a green checkmark next to your newly created
variant (in the IV column) and hit save.
See note 300633 for more information
hope this helps
Paul Q

How to create new variants - VA05

Hi All,
I'm new in SD
How to create new variants in Tcode VA05, our client wants to create new variants as per user selections, pls advise how to resolve this issue.
Regards,
Sankaran

Below is an example of step by step explanation...Following that u cud do that in VA01...
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]..
Hope this helps...

Create variant in VA05

Hi,
How can we create a variant in VA05 to make it available in the display variant list?
i have done below settings after that what i have to do??
A) Menu -> 'System -> User profile -> Own data'
B) Change to the 'Parameters' screen
C) Maintain the following entry,
Parameter: SD_VARIANT_MAINTAIN Value: A
D) Save your new settings.
Thanks

Hello,
I would suggest you to use T-Code VA05N.
Here enter the required selection creteria & then select Goto - Variants - Save as Variant.
Hope this helps,
Thanks,
Jignesh Mehta

How to create a variant in VA05?

Hi,
How can we create a variant in VA05 to make it available in the display variant list?do we need any authorization?
Thanks,
Rakesh.

Display variants can be administered in the result list, not at the selection screen. Do not mix up 'display variants' with normal variants which are a mere set of input-parameters.
To gain access to the 'administraion' and 'save' functions of the display variant, you need to have Parameter ID SD_VARIANT_MAINTAIN on your user with value 'A'.
also ref:
http://help.sap.com/saphelp_erp2005/helpdata/EN/ed/9db6e8aea911d2b71f0000e8160175/frameset.htm

Creation of New Variant

Hello,
I need a variant which does ' quant * quant = quant '.
The nearest variant that I found is QUANTI12 which does ' qant / quant = factor ' . I copied the variant to Zvariant.
Now I try to modify the outpout from ' factor ' to ' quant '.
Someone already did it?
Thanks,
Ben

A QUANT operand is not prorated unless it is multiplied in a subsequent step with a factor or a price which has more than one value for the billing period. When the output operand is a quantity systems looks ahead in the schema and determine if this output operand is used in other steps as input operand and if so if other input operands (factors, prices) used as input operands in the same step have prorations. If they do then the quantity operand is prorated, if not only a single value is store for the quant operand.
You might be able to create time slices for the output operand in an new variant but I think you should also consider using user exit EBIA0002 - IS-U: proration according to customer-specific dates.
Regards,
Daniel Toba

Is this a new variant of the 'grey screen, won't boot' problem?

Hello all. My second hand Powerbook G4 starts, the bitten apple comes up, then there is no further boot up action. The situation leading to this was as follows;
- firstly, starting but going to a blank/grey screen and staying there. The new variant alluded to, which I have not been able to find referred to, was that at this stage, one could for a while, actually type letters (coming out in white). After a while this stops.
- researching this problem here I followed the advice in the Grey Screen article - http://support.apple.com/kb/TS2570
one on resetting the PMU - http://support.apple.com/kb/HT1431#faq11
and on using Target Disk Mode - http://support.apple.com/kb/HT1661
None of this helped in the slightest with these symptons.
Because I was away on holiday at the time I did not have access to system disks, or actually using Target Disk Mode. On returning I used TDM to successfully connect to the PB, and it became evident that there is a drive problem. I had taken quite a few edited videos with me and it was possible to copy some off, but not others. Data that refused to copy always led to having to restart the machine because the 'copy' mode would refuse to cancel. I also reinstalled the OS, and using another PB used TDM to allow Diskwarrior and Disk Utility to work on the poorly machine. Both were able to do some work, but not complete all their tasks. The SMART, so called, diagnostics always came up fine.
Now if I turn it on the grey screen stage is not reached, the apple symbol comes up and stays there, with no spinning wheels.
So, is there anything else I can do?
Is the grey screen with some typing possible relevant or interesting in any way?
Thanks!
Stephen

Hello,
It's possible to have two Mac OS X's installed on one drive.
Have you tried this:
Restart whilst holding down Command-S
The screen should turn black and load some text
At the prompt type
fsck -fy and press Return
Hopefully some repairs will be performed.
At the prompt type
reboot and press Return
If that doesn't provide any help then try starting in safe mode.
http://support.apple.com/kb/HT1455
Once in safe mode, you can set the startup disk and reboot.
If that don't help, then all I can suggest is a clean install of the OS.
Using a Mac OS X install disk either retail or for a PowerBook G4, boot and upon selecting the destination drive, select option, then erase and reinstall.
A fresh install should resolve this problem as a last resort.
Best of luck, let us know how you get on.

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

T.code FKMT: the customizing navigation to create new variants ...

Hi All,
with reference to t.code FKMT (Account Assignment Model) could anyone show me the customizing navigation to create new variants in the screen template (from menù: seetings/screen template) ?
Thanks
Gandalf

please check
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/screen-template-define-in-tcode-fkmt-2375586
http://iris.tennessee.edu/BPP/FI/Finance%20&%20Controlling/FI_GL_FKMT_FI%20acct%20assnmt%20model%20mgmt.doc.
hopes it helps
Edited by: Jose Lastra on Oct 26, 2008 1:01 PM

How to create column selection variant for VA05?

Hi Experts,
How do I create column selection variant for VA05?
Thanks,
Sachin

Hi,
Goto SU3, enter user name and press enter
goto parameters tab, enter parameter ID SD_VARIANT_MAINTAIN and parameter value 'A' and save.
Now check in VA05, you will get save button in active mode.
Regards,
Chandra

Creating Variant for VA05???

Hi SAPians,
Could you please give me the step by step process on how to create variant for VA05 for column layout.
Thanks in advance
MM.

hello, friend.
first, execute VA05. customize your layout by clicking on the "current" icon.
next, save your layout by going SETTINGS > DISPLAY VARIANTS > SAVE. please note that unless your user parameters include the appropriate profile, the "save" option remains greyed out and unavailable. ask your BASIS consultant to assign you parameter = SD_VARIANT_MAINTAIN with value "A". then you can save your own variant.
regards.
p.s.
i got this idea from someone else. i think it was lakshmipathi. whoever it was, thanks.

Saving variant for va05

Dear Sap Guru,
I am creating variant for Va05 but saving option is coming grey.
So i went to SU02 in parameter tab & I maintain SD_variant_maintain- a but still it is showing grey so what to do. It's urgent.
Regards
rdc

Hello,
please check your user profile and maintain the parameter
SD_VARIANT_MAINTAIN with a value of 'A' in the following path:
      > system
        > user profile
          > own data
            > parameter tab
If you have set the parameter you can save your own display variants.
Please have a look at the note 113965 concerning the problem.
To createa display variant please check the note 300633.
But please notice that the SAP-variants cannot changed in the SAP-
area.
I hope that the information are helpful for you.
Regards
Claudia
If you are satisfied with the answer, please give Reward Points

SUBMIT with a new Variant

Dear all,
I want to call a report via 'SUBMIT'. Hereby I have to create a new variant.
My Questions:
1) How can I create the variant with selection parameters (Not manual) mybe via Functionmodul?

You don't need a variant to submit the program, this is only required for background jobs.
When using submit , you can easily pass the parameters one by one, or specify them (and their values) in special table and then pass it at once during program submition.
Check [SUBMIT|http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_SHORTREF.htm]
Regards
Marcin

Adding New Fields to the Variant in VA05

When we click the t code VA05 we get Display list of open sales orders. When we click on Display variants we get three fields
1) Requests
2) Order Item
3) Order Schedule
My question is when you click on these of these variants u get fields. How do u add additional fields and whats the procedure for that.????
Regards
Atul Keshav

Hello Atul,
You can review the note 350068, which describes how to add any field (as an example VBAP-KDMAT in the note) in VA05. I hope it helps.
Best regards,
Lela

Adding a new field to VA05 Report output

Hi All,
Please suggest what's the best method to add the new field in the report output of VA05 this can be done in 2 ways one way is by writing the code in theUser exit PERFORM MOVE_USERFIELDS or copy the whole program to Zprogram and write the Code?Ist one need access key but the the other method is not required.
Please suggest me the best method
Thanks&Regards
Mahesh

Hi Mahesh,
i'm in the process of making a similar change,
copying to a ZPROGRAM is not so difficult, but as i told you you have to add your new field to VBMTV structure, and copy the includes that you need to change,
P.S. Note, when you copy you have to change some SELECT statements where
it's selecting from T180V table based on sy-repid, you hav to change sy-repid to SAPMV75A, as there's some configuration done for this.
Regards,
Raghavendra

New Variant in VA05

Similar Messages

Maybe you are looking for