New vendor for a rawmaterial

Hi ,
I have a requirement in which I need to find new vendor a raw material used for a product. How can we that information?
Thanks,
Mohan

Hi ,
Thanks for your reply. I will look into those T codes .
Thanks again for your quick answer.
Mohan

Similar Messages

Configuration for new company code & new vendor for Invoicing(FB60)

Hi All,
i am using FB60 to create the Invoice & then using F110 for the payment for existing company codes. Now i need to do the invoice & payment for a new comapny code & new vendor . Please tell me what are the configurations, i should do so that i can do the invoice for new comapny code & new vendor.
Thanks
pabi

Hi,
Use tables,
1.For material MARA,MARC,MVKE,( try use t.code:MM60)
2.For vendor LFA1,LFB1 (try use t.code:MKVZ)
Regards,
Biju K

Change vendor evaluation with new scores for automatic criteria

Hi,
I would like to delete actual vendor evaluations and revaluate my vendors with new scores for the automatic criteria on time delivery.
Using the program RMEVALDL doesn't work.
Does somebody have a suggestion please ??
Thanks in advance,
Kind regards

hi,
Points scores for automatic subcriteria: The intervals for the automatic subcriteria used must be maintained, otherwise nonsensical scores may result. In addition to the F1 documentation, you should take account of SAP Note 51054. The limit values -99.9% and 99.9% must be maintained. Similarly, the invisible limit 0 must be observed.
Variance             Score
-99.9%               1
+99.9%              100
A variance of 0% brings the vendor 100 points, whereas a variance of -1% results in a score of 1 point.
check the following link.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/KnowledgePaperVendor+Evaluation
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
regards
sumit simran

What is procedure for creating new vendor and material master data in ABAP

What is procedure for creating new vendor and material master data in ABAP .

see below code which is used for creation of vendor master as well as extension...
*& Report ZFC_VENDOR_CREATE                                           *
REPORT ZFC_VENDOR_CREATE LINE-SIZE 100
                           NO STANDARD PAGE HEADING
                           MESSAGE-ID ZZ.
                     TABLES
TABLES : SSCRFIELDS.   " Fields on selection screens
                     CONSTANTS
DATA : C_SPLIT TYPE C VALUE '#'. " Used for Has Separator in GUI_UPLAOD
                     TYPES
Int'table to hold Vendor Master Data
TYPES : BEGIN OF TY_VENDOR_MASTER,
          FLAG TYPE C,               " Update Flag
          LIFNR TYPE LIFNR,           " Vendor Number
          BUKRS TYPE BUKRS,           " Company Code
          KTOKK TYPE KTOKK,           " Account Group
          ANRED TYPE ANRED,           " Title
          NAME1 TYPE NAME1_GP,        " Name1
          NAME2 TYPE NAME2_GP,        " Name2
          SORTL TYPE SORTL,           " Search Term 1
          SORT2 TYPE AD_SORT2UL,      " Search Term 2
          STRAS TYPE STRAS_GP,        " Street
          PSTLZ TYPE PSTLZ,           " Postal Code
          ORT01 TYPE ORT01_GP,        " City
          REGIO TYPE REGIO,           " Region
          LAND1 TYPE LAND1_GP,        " Country
          SPRAS TYPE SPRAS,           " Language
          VBUND TYPE RASSC,           " Trading Partner
          BANKS TYPE BANKS,           " Country
          BANKL TYPE BANKK,           " Bank Key
          BANKN TYPE BANKN,           " Bank Account
          BKONT TYPE BKONT,           " Bank Control Key
          BANKA TYPE BANKA,           " Name of Bank
          AKONT TYPE AKONT,           " Reconciliation Account
          FDGRV TYPE FDGRV,           " Cash Management Group
          ZTERM TYPE DZTERM,          " Payment Terms
          REPRF TYPE REPRF,           " Check Double Invoice
          ZWELS TYPE DZWELS,          " Payment Methods
          XPORE TYPE XPORE,           " Pay all items separately
        END   OF TY_VENDOR_MASTER,
Int'table to hold Vendor Extend Data
        BEGIN OF TY_VENDOR_EXTEND,
          FLAG TYPE C,               " Update Flag
          LIFNR     TYPE LIFNR,           " Vendor Number
          BUKRS     TYPE BUKRS,           " Company Code
          KTOKK     TYPE KTOKK,           " Account Group
          REF_LIFNR TYPE LIFNR,           " Reference Vendor Number
          REF_BUKRS TYPE BUKRS,           " Reference Company Code
          AKONT     TYPE AKONT,           " Reconciliation Account
          FDGRV     TYPE FDGRV,           " Cash Management Group
          ZTERM     TYPE DZTERM,          " Payment Terms
          REPRF     TYPE REPRF,           " Check Double Invoice
          ZWELS     TYPE DZWELS,          " Payment Methods
          XPORE TYPE XPORE,           " Pay all items separately
        END   OF TY_VENDOR_EXTEND,
Int'table to hold Error Records Data
        BEGIN OF TY_ERROR,
          MSG(200) TYPE C,                " To hold Message
          LIFNR    TYPE LIFNR,            " Vendor Number
          BUKRS    TYPE BUKRS,            " Company Code
        END   OF TY_ERROR.
                     DATA (Simple Fields)
DATA : W_COUNT TYPE I,               " Variable to hold count of Records
       W_SUCC_REC TYPE I,            " No. of Success Records
       W_SUCC_REC1 TYPE I,           " No. of Updated Records
       W_ERR_REC TYPE I,             " No. of Error Records
       w_noupdate_rec type i.        " No. of Records not Changed
                     INTERNAL TABLES
Int'table to hold uploaded data from File
DATA : IT_VENDOR_MASTER    TYPE STANDARD TABLE OF TY_VENDOR_MASTER,
       WA_IT_VENDOR_MASTER TYPE TY_VENDOR_MASTER,
       IT_VENDOR_EXTEND    TYPE STANDARD TABLE OF TY_VENDOR_EXTEND,
       WA_IT_VENDOR_EXTEND TYPE TY_VENDOR_EXTEND,
       WA_IT_BDCDATA       TYPE BDCDATA,
       IT_BDCDATA          TYPE STANDARD TABLE OF BDCDATA,
       WA_IT_MESSTAB       TYPE BDCMSGCOLL,
       IT_MESSTAB          TYPE STANDARD TABLE OF BDCMSGCOLL,
       IT_ERROR            TYPE STANDARD TABLE OF TY_ERROR,
       WA_IT_ERROR         TYPE TY_ERROR,
       it_error_fk01       type standard table of ty_error,
       wa_it_error_fk01    type ty_error,
       it_error_fk02       type standard table of ty_error,
       wa_it_error_fk02    type ty_error,
       it_succ_rec1        type standard table of ty_error,
       wa_it_succ_rec1     type ty_error,
       it_noupdate         type standard table of ty_error,
       wa_it_noupdate      type ty_error.
                     FLAGS
DATA : FL_FLAG1 TYPE C,          " Flag to check error upload file
       FL_FLAG2 TYPE C,          " Flag to hold value
       FL_FLAG3 TYPE C,          " Flag to hold value
       FL_FLAG4 TYPE C.          " Flag to hold value
                     SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-001,
            POSITION POS_LOW.
PARAMETERS :       P_FILE(128) DEFAULT 'C:\UPLOAD.TXT' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-002,
            POSITION POS_LOW.
PARAMETERS :       P_VENMAS RADIOBUTTON GROUP R1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-003,
            POSITION POS_LOW.
PARAMETERS :       P_VENEXT RADIOBUTTON GROUP R1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-004,
            POSITION POS_LOW.
PARAMETERS :       P_MODE(1) DEFAULT 'N'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-005,
            POSITION POS_LOW.
PARAMETERS :       P_GROUP(12) DEFAULT 'ZFC_VENDOR_C' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-016,
            POSITION POS_LOW.
PARAMETERS :       P_GROUP1(12) DEFAULT 'ZFC_VENDOR_U' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
                     AT SELECTION-SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Form to get file path for upload of data
PERFORM GET_FILE_PATH.
AT SELECTION-SCREEN ON BLOCK B1.
Form to Validate data specified on Selection Screen
CHECK SSCRFIELDS-UCOMM EQ 'ONLI'.
PERFORM VALIDATE_DATA.
                     START - OF - SELECTION
START-OF-SELECTION.
IF P_VENMAS = 'X'.
Form to upload data from Presentation Server for Vendor Master
    PERFORM UPLOAD_DATA TABLES IT_VENDOR_MASTER.
    IF FL_FLAG1 NE 'X'.
      SORT IT_VENDOR_MASTER BY LIFNR BUKRS KTOKK.
      DELETE IT_VENDOR_MASTER WHERE LIFNR = ' '
                              AND   BUKRS = ' '
                              AND   KTOKK = ' '.
Form to process data for Vendor Master
      PERFORM INSERT_VENDOR_MASTER_DATA.
    ENDIF.
ELSEIF P_VENEXT = 'X'.
Form to upload data from Presentation Server for Vendor Extend
    PERFORM UPLOAD_DATA TABLES IT_VENDOR_EXTEND.
    IF FL_FLAG1 NE 'X'.
      SORT IT_VENDOR_EXTEND BY LIFNR BUKRS KTOKK.
      DELETE IT_VENDOR_EXTEND WHERE LIFNR = ' '
                              AND   BUKRS = ' '
                              AND   KTOKK = ' '.
Form to process data for Vendor Master
      PERFORM CHK_AND_INS_VENDOR_EXTEND_DATA.
    ENDIF.
ENDIF.
                     END - OF - SELECTION
END-OF-SELECTION.
IF FL_FLAG1 NE 'X'.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O01.           " Total Number of records read :
    FORMAT COLOR OFF.
    WRITE:40 W_COUNT.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O02.           " Total Number of Success records :
    FORMAT COLOR OFF.
    WRITE:40 W_SUCC_REC.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O07.           " Total Number of Updated records :
    FORMAT COLOR OFF.
    WRITE:40 W_SUCC_REC1.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O08.           " Total Number of Unchanged records :
    FORMAT COLOR OFF.
    WRITE:40 W_noupdate_REC.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O03.           " Total Number of Error records :
    FORMAT COLOR OFF.
    WRITE:40 W_ERR_REC.
    if not it_succ_rec1 is initial.
      skip 1.
      perform display_changed_report.
    endif.
    if not it_noupdate is initial.
      skip 1.
      perform display_nochange_report.
    endif.
    IF NOT IT_ERROR IS INITIAL.
      SKIP 3.
Form to display error data
      PERFORM DISPLAY_ERROR_REPORT.
    ENDIF.
    IF FL_FLAG2 = 'X'.
      SKIP 2.
      FORMAT COLOR 4.
      WRITE:/2 TEXT-O04.        " BDC Session Name for Creation (FK01) :
      FORMAT COLOR OFF.
      WRITE:40 P_GROUP.
      perform display_error_report_fk01.
    ENDIF.
    IF FL_FLAG3 = 'X'.
      SKIP 2.
      FORMAT COLOR 4.
      WRITE:/2 TEXT-O09.        " BDC Session Name for Updation (FK02) :
      FORMAT COLOR OFF.
      WRITE:40 P_GROUP1.
      perform display_error_report_fk02.
    ENDIF.
ENDIF.
*&      Form GET_FILE_PATH
This form is used to get the specified path for uploading of data from
flat file with the help of F4 function key
FORM GET_FILE_PATH .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = ' '
    IMPORTING
      FILE_NAME     = P_FILE.
ENDFORM.                    " GET_FILE_PATH
*&      Form VALIDATE_DATA
This form is used to validate the data given by user on the Selection
Screen and the appropriate message is been displayed when an wrong
entry is inputted
FORM VALIDATE_DATA .
IF SY-BATCH EQ 'X'.
    CLEAR SSCRFIELDS-UCOMM.
    MESSAGE E001(ZZ) WITH TEXT-011.
    " Excel file not to be used in Batch Mode
ENDIF.
IF P_MODE NE 'A' AND P_MODE NE 'N' AND P_MODE NE 'E'.
    MESSAGE E001(ZZ) WITH TEXT-012.
    " Session Mode should be either A or N or E
ENDIF.
ENDFORM.                    " VALIDATE_DATA
*&      Form UPLOAD_DATA
This form is used to upload data from Presentation Server for either
Vendor Master or Vendor Extend
FORM UPLOAD_DATA TABLES P_IT_VENDOR.
DATA : L_FILENAME TYPE STRING,
         L_FILETYPE TYPE CHAR10 VALUE 'ASC',
         L_HEADER_LENGTH TYPE I VALUE 0,
         L_READ_BY_LINE TYPE CHAR01 VALUE 'X'.
MOVE P_FILE TO L_FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = L_FILENAME
      FILETYPE                = L_FILETYPE
      HEADER_LENGTH           = L_HEADER_LENGTH
      READ_BY_LINE            = L_READ_BY_LINE
      HAS_FIELD_SEPARATOR     = C_SPLIT
    TABLES
      DATA_TAB                = P_IT_VENDOR
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
IF SY-SUBRC <> 0.
   MESSAGE I001(ZZ) WITH TEXT-006 L_FILENAME.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    FL_FLAG1 = 'X'.
ELSEIF P_IT_VENDOR[] IS INITIAL.
    MESSAGE I001(ZZ) WITH TEXT-014.   " Uploaded File contains no data
    FL_FLAG1 = 'X'.
ENDIF.
ENDFORM.                    " UPLOAD_DATA
*&      Form INSERT_VENDOR_MASTER_DATA
This form is used to process BDC data for Vendor Master
FORM INSERT_VENDOR_MASTER_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR.
sort it_vendor_master by flag.
LOOP AT IT_VENDOR_MASTER INTO WA_IT_VENDOR_MASTER.
    W_COUNT = W_COUNT + 1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = WA_IT_VENDOR_MASTER-LIFNR
      IMPORTING
        OUTPUT = WA_IT_VENDOR_MASTER-LIFNR.
    if wa_it_vendor_master-flag = 'A'.
    SELECT SINGLE LIFNR
           FROM LFB1
           INTO L_LIFNR
           WHERE LIFNR = WA_IT_VENDOR_MASTER-LIFNR
           AND   BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    IF SY-SUBRC EQ 0.
      WA_IT_ERROR-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
      WA_IT_ERROR-MSG   = TEXT-015.
      APPEND WA_IT_ERROR TO IT_ERROR.
      W_ERR_REC = W_ERR_REC + 1.
      CLEAR : WA_IT_ERROR, L_LIFNR.
    ELSE.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_MASTER.
      PERFORM CALL_TRANSACTION.
    ENDIF.
    CLEAR : WA_IT_VENDOR_MASTER.
    elseif wa_it_vendor_master-flag = 'C'.
      IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
        PERFORM CLOSE_BDC_SESSION.
        fl_flag4 = 'X'.
      ENDIF.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_MASTER.
      PERFORM CALL_TRANSACTION_FK02.
      CLEAR : WA_IT_VENDOR_MASTER.
    elseif wa_it_vendor_master-flag = 'N'.
      WA_IT_noupdate-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_noupdate-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
      WA_IT_noupdate-MSG   = TEXT-018.
      APPEND WA_IT_noupdate TO IT_noupdate.
      W_noupdate_REC = W_noupdate_REC + 1.
      CLEAR : WA_IT_noupdate, WA_IT_VENDOR_MASTER.
    endif.
ENDLOOP.
IF FL_FLAG3 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM.                    " INSERT_VENDOR_MASTER_DATA
*&      Form POPULATE_BDC_DATA_VEN_MASTER
This form is used to populate BDC data of Vendor Master
FORM POPULATE_BDC_DATA_VEN_MASTER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = WA_IT_VENDOR_MASTER-ZTERM
    IMPORTING
      OUTPUT = WA_IT_VENDOR_MASTER-ZTERM.
IF WA_IT_VENDOR_MASTER-REPRF = 'Y'.
    WA_IT_VENDOR_MASTER-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_MASTER-XPORE = 'Y'.
    WA_IT_VENDOR_MASTER-XPORE = 'X'.
ENDIF.
if wa_it_vendor_master-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
           BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_MASTER-KTOKK,
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_master-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
           BDC_FIELD USING 'BDC_OKCODE' '=MALL',
           BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-D0110' 'X',
           BDC_FIELD USING 'RF02K-D0120' 'X',
           BDC_FIELD USING 'RF02K-D0130' 'X',
           BDC_FIELD USING 'RF02K-D0210' 'X',
           BDC_FIELD USING 'RF02K-D0215' 'X',
           BDC_FIELD USING 'RF02K-D0220' 'X',
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0110',
           BDC_FIELD USING 'LFA1-ANRED' WA_IT_VENDOR_MASTER-ANRED,
           BDC_FIELD USING 'LFA1-NAME1' WA_IT_VENDOR_MASTER-NAME1,
           BDC_FIELD USING 'LFA1-NAME2' WA_IT_VENDOR_MASTER-NAME2,
           BDC_FIELD USING 'LFA1-SORTL' WA_IT_VENDOR_MASTER-SORTL,
           BDC_FIELD USING 'LFA1-STRAS' WA_IT_VENDOR_MASTER-STRAS,
           BDC_FIELD USING 'LFA1-ORT01' WA_IT_VENDOR_MASTER-ORT01,
           BDC_FIELD USING 'LFA1-PSTLZ' WA_IT_VENDOR_MASTER-PSTLZ,
           BDC_FIELD USING 'LFA1-LAND1' WA_IT_VENDOR_MASTER-LAND1,
           BDC_FIELD USING 'LFA1-REGIO' WA_IT_VENDOR_MASTER-REGIO,
           BDC_FIELD USING 'LFA1-SPRAS' WA_IT_VENDOR_MASTER-SPRAS,
           BDC_FIELD USING 'BDC_OKCODE' '/00',
           BDC_DYNPRO USING 'SAPMF02K' '0120',
           BDC_FIELD USING 'LFA1-VBUND' WA_IT_VENDOR_MASTER-VBUND,
           BDC_FIELD USING 'BDC_OKCODE' '/00',
           BDC_DYNPRO USING 'SAPMF02K' '0130',
           BDC_FIELD USING 'LFBK-BANKS(01)' WA_IT_VENDOR_MASTER-BANKS,
           BDC_FIELD USING 'LFBK-BANKL(01)' WA_IT_VENDOR_MASTER-BANKL,
           BDC_FIELD USING 'LFBK-BANKN(01)' WA_IT_VENDOR_MASTER-BANKN,
           BDC_FIELD USING 'BDC_OKCODE' '=BANK',
           BDC_DYNPRO USING 'SAPLBANK' '0100',
           BDC_FIELD USING 'BNKA-BANKA' WA_IT_VENDOR_MASTER-BANKA,
           BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
           BDC_DYNPRO USING 'SAPMF02K' '0130',
           BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
           BDC_DYNPRO USING 'SAPMF02K' '0210',
           BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_MASTER-AKONT,
           BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_MASTER-FDGRV,
           BDC_FIELD USING 'BDC_OKCODE' '=/00',
           BDC_DYNPRO USING 'SAPMF02K' '0215',
           BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_MASTER-ZTERM,
           BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_MASTER-REPRF,
           BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_MASTER-ZWELS,
           BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_MASTER-XPORE,
           BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM.                    " POPULATE_BDC_DATA_VEN_MASTER
*&      Form BDC_DYNPRO
This form is used to move data to BDCDATA int'table
FORM BDC_DYNPRO USING PROGRAM TYPE BDC_PROG
                       DYNPRO TYPE BDC_DYNR.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-PROGRAM = PROGRAM.
WA_IT_BDCDATA-DYNPRO   = DYNPRO.
WA_IT_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM.                    " BDC_DYNPRO
*&      Form BDC_FIELD
This form is used to move data to BDCDATA int'table
FORM BDC_FIELD USING FNAM TYPE ANY
                      FVAL TYPE ANY.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-FNAM = FNAM.
WA_IT_BDCDATA-FVAL = FVAL.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM.                    " BDC_FIELD
*&      Form CALL_TRANSACTION
This form is used to Call FK01 for processing of data either for
Vendor Master or Vendor Extend. The error records are inserted to
Session which can be processed using SM35
FORM CALL_TRANSACTION .
DATA : L_OPTION TYPE CTU_PARAMS,
         L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01'
       USING IT_BDCDATA
       MESSAGES INTO IT_MESSTAB
       OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
    W_SUCC_REC = W_SUCC_REC + 1.
ELSE.
    IF FL_FLAG2 NE 'X'.
      PERFORM OPEN_BDC_SESSION.
      FL_FLAG2 = 'X'.
    ENDIF.
    PERFORM BDC_INSERT.
    W_ERR_REC = W_ERR_REC + 1.
    PERFORM ERROR_RECORD_DATA.
ENDIF.
ENDFORM.                    " CALL_TRANSACTION
*&      Form OPEN_BDC_SESSION
Form used to open session for Error out Records
FORM OPEN_BDC_SESSION .
DATA : L_USERID TYPE APQ_MAPN,      " Variable to hold user-id
         L_GROUP TYPE APQ_GRPN.       " Variable to hold value
MOVE P_GROUP TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      CLIENT              = SY-MANDT
      GROUP               = L_GROUP
      KEEP                = SPACE
      USER                = L_USERID
    EXCEPTIONS
      CLIENT_INVALID      = 1
      DESTINATION_INVALID = 2
      GROUP_INVALID       = 3
      GROUP_IS_LOCKED     = 4
      HOLDDATE_INVALID    = 5
      INTERNAL_ERROR      = 6
      QUEUE_ERROR         = 7
      RUNNING             = 8
      SYSTEM_LOCK_ERROR   = 9
      USER_INVALID        = 10
      OTHERS              = 11.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-008.              " Unable to open BDC Session
ENDIF.
ENDFORM.                    " OPEN_BDC_SESSION
*&      Form BDC_INSERT
This form is used to insert error records to a Session method
FORM BDC_INSERT .
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE            = 'FK01'
    TABLES
      DYNPROTAB        = IT_BDCDATA
    EXCEPTIONS
      INTERNAL_ERROR   = 1
      NOT_OPEN         = 2
      QUEUE_ERROR      = 3
      TCODE_INVALID    = 4
      PRINTING_INVALID = 5
      POSTING_INVALID = 6
      OTHERS           = 7.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-009.             " Unable to Insert Data to BDC Session
ENDIF.
ENDFORM.                    " BDC_INSERT
*&      Form ERROR_RECORD_DATA
This form is used to process the messages for the error records which
will be displayed on the output report
FORM ERROR_RECORD_DATA .
DATA : L_LINES TYPE I,
         L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
    CLEAR L_MSG.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID        = WA_IT_MESSTAB-MSGID
        LANG      = SY-LANGU
        NO        = WA_IT_MESSTAB-MSGNR
        V1        = WA_IT_MESSTAB-MSGV1
        V2        = WA_IT_MESSTAB-MSGV2
        V3        = WA_IT_MESSTAB-MSGV3
        V4        = WA_IT_MESSTAB-MSGV4
      IMPORTING
        MSG       = L_MSG
      EXCEPTIONS
        NOT_FOUND = 1
        OTHERS    = 2.
    IF SY-SUBRC = 0.
      WA_IT_ERROR_fk01-MSG = L_MSG.
    ENDIF.
    IF P_VENMAS = 'X'.
      WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_ERROR_fk01 TO IT_ERROR_fk01.
    CLEAR WA_IT_ERROR_fk01.
ENDIF.
ENDFORM.                    " ERROR_RECORD_DATA
*&      Form CLOSE_BDC_SESSION
Form used to close session of the Error Records
FORM CLOSE_BDC_SESSION .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-010.             " Unable to Close BDC Session
ENDIF.
ENDFORM.                    " CLOSE_BDC_SESSION
*&      Form CHK_AND_INS_VENDOR_EXTEND_DATA
This form is used to process BDC data for Vendor Extend
FORM CHK_AND_INS_VENDOR_EXTEND_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR, fl_flag4.
sort it_vendor_extend by flag.
LOOP AT IT_VENDOR_EXTEND INTO WA_IT_VENDOR_EXTEND.
    W_COUNT = W_COUNT + 1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR
      IMPORTING
        OUTPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR.
    if wa_it_vendor_extend-flag = 'A'.
    SELECT SINGLE LIFNR
           FROM LFB1
           INTO L_LIFNR
           WHERE LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR
           AND   BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
    IF SY-SUBRC NE 0.
      WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR.
      WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
      WA_IT_ERROR-MSG   = TEXT-007.
      APPEND WA_IT_ERROR TO IT_ERROR.
      W_ERR_REC = W_ERR_REC + 1.
      CLEAR : WA_IT_ERROR, L_LIFNR.
    ELSE.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          INPUT = WA_IT_VENDOR_EXTEND-LIFNR
        IMPORTING
          OUTPUT = WA_IT_VENDOR_EXTEND-LIFNR.
      SELECT SINGLE LIFNR
             FROM LFB1
             INTO L_LIFNR
             WHERE LIFNR = WA_IT_VENDOR_EXTEND-LIFNR
             AND   BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
      IF SY-SUBRC EQ 0.
        WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
        WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
        WA_IT_ERROR-MSG   = TEXT-015.
        APPEND WA_IT_ERROR TO IT_ERROR.
        W_ERR_REC = W_ERR_REC + 1.
        CLEAR : WA_IT_ERROR, L_LIFNR.
      ELSE.
        REFRESH IT_BDCDATA.
        CLEAR IT_BDCDATA.
        PERFORM POPULATE_BDC_DATA_VEN_EXTEND.
        PERFORM CALL_TRANSACTION.
      ENDIF.
    ENDIF.
    CLEAR : WA_IT_VENDOR_EXTEND.
    elseif wa_it_vendor_extend-flag = 'C'.
      IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
        PERFORM CLOSE_BDC_SESSION.
        fl_flag4 = 'X'.
      ENDIF.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_extend.
      PERFORM CALL_TRANSACTION_FK02.
       CLEAR : WA_IT_VENDOR_EXTEND.
    elseif wa_it_vendor_extend-flag = 'N'.
      WA_IT_noupdate-LIFNR = WA_IT_VENDOR_extend-LIFNR.
      WA_IT_noupdate-BUKRS = WA_IT_VENDOR_extend-BUKRS.
      WA_IT_noupdate-MSG   = TEXT-019.
      APPEND WA_IT_noupdate TO IT_noupdate.
      W_noupdate_REC = W_noupdate_REC + 1.
      CLEAR : WA_IT_noupdate, WA_IT_VENDOR_EXTEND.
    endif.
ENDLOOP.
IF FL_FLAG2 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
if fl_flag3 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM.                    " CHK_AND_INS_VENDOR_EXTEND_DATA
*&      Form POPULATE_BDC_DATA_VEN_EXTEND
This form is used to populate BDC data of Vendor Extend
FORM POPULATE_BDC_DATA_VEN_EXTEND .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = WA_IT_VENDOR_EXTEND-ZTERM
    IMPORTING
      OUTPUT = WA_IT_VENDOR_EXTEND-ZTERM.
IF WA_IT_VENDOR_EXTEND-REPRF = 'Y'.
    WA_IT_VENDOR_EXTEND-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_extend-XPORE = 'Y'.
    WA_IT_VENDOR_extend-XPORE = 'X'.
ENDIF.
if wa_it_vendor_extend-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_EXTEND-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_EXTEND-BUKRS,
           BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_EXTEND-KTOKK,
           BDC_FIELD USING 'RF02K-REF_LIFNR'
                                      WA_IT_VENDOR_EXTEND-REF_LIFNR,
           BDC_FIELD USING 'RF02K-REF_BUKRS'
                                      WA_IT_VENDOR_EXTEND-REF_BUKRS,
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_extend-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_extend-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_extend-BUKRS,
           BDC_FIELD USING 'RF02K-D0210' 'X',
           BDC_FIELD USING 'RF02K-D0215' 'X',
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0210',
           BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_EXTEND-AKONT,
           BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_EXTEND-FDGRV,
           BDC_FIELD USING 'BDC_OKCODE' '=/00',
           BDC_DYNPRO USING 'SAPMF02K' '0215',
           BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_EXTEND-ZTERM,
           BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_EXTEND-REPRF,
           BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_EXTEND-ZWELS,
           BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_extend-XPORE,
           BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM.                    " POPULATE_BDC_DATA_VEN_EXTEND
*&      Form DISPLAY_ERROR_REPORT
This form is used to display the error records on the output screen
FORM DISPLAY_ERROR_REPORT .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O05.            " Error List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O06.            " Error List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H03,              " Error Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR INTO WA_IT_ERROR.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_ERROR-LIFNR,
           17 SY-VLINE,
           18 WA_IT_ERROR-BUKRS,
           31 SY-VLINE,
           32 WA_IT_ERROR-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_ERROR.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
ENDFORM.                    " DISPLAY_ERROR_REPORT
*&      Form CALL_TRANSACTION_FK02
Form used to Call Transaction FK02
form CALL_TRANSACTION_FK02 .
DATA : L_OPTION TYPE CTU_PARAMS,
         L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK02'
       USING IT_BDCDATA
       MESSAGES INTO IT_MESSTAB
       OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
    W_SUCC_REC1 = W_SUCC_REC1 + 1.
    WA_IT_succ_rec1-MSG = Text-017.
    IF P_VENMAS = 'X'.
      WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_succ_rec1 TO IT_succ_rec1.
ELSE.
    IF FL_FLAG3 NE 'X'.
      PERFORM OPEN_BDC_SESSION_fk02.
      FL_FLAG3 = 'X'.
    ENDIF.
    PERFORM BDC_INSERT_fk02.
    W_ERR_REC = W_ERR_REC + 1.
    PERFORM ERROR_RECORD_DATA1.
ENDIF.
endform.                    " CALL_TRANSACTION_FK02
*&      Form OPEN_BDC_SESSION_fk02
Form used to Open session for FK02
form OPEN_BDC_SESSION_fk02 .
DATA : L_USERID TYPE APQ_MAPN,      " Variable to hold user-id
         L_GROUP TYPE APQ_GRPN.       " Variable to hold value
MOVE P_GROUP1 TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      CLIENT              = SY-MANDT
      GROUP               = L_GROUP
      KEEP                = SPACE
      USER                = L_USERID
    EXCEPTIONS
      CLIENT_INVALID      = 1
      DESTINATION_INVALID = 2
      GROUP_INVALID       = 3
      GROUP_IS_LOCKED     = 4
      HOLDDATE_INVALID    = 5
      INTERNAL_ERROR      = 6
      QUEUE_ERROR         = 7
      RUNNING             = 8
      SYSTEM_LOCK_ERROR   = 9
      USER_INVALID        = 10
      OTHERS              = 11.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-008.              " Unable to open BDC Session
ENDIF.
endform.                    " OPEN_BDC_SESSION_fk02
*&      Form BDC_INSERT_fk02
Form used to insert data into BDC session using FK02
form BDC_INSERT_fk02 .
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE            = 'FK02'
    TABLES
      DYNPROTAB        = IT_BDCDATA
    EXCEPTIONS
      INTERNAL_ERROR   = 1
      NOT_OPEN         = 2
      QUEUE_ERROR      = 3
      TCODE_INVALID    = 4
      PRINTING_INVALID = 5
      POSTING_INVALID = 6
      OTHERS           = 7.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-009.             " Unable to Insert Data to BDC Session
ENDIF.
endform.                    " BDC_INSERT_fk02
*&      Form display_changed_report
Form to display Updated Vendor data
form display_changed_report .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O10.          " Updated List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O11.          " Updated List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_succ_rec1 INTO WA_IT_succ_rec1.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_succ_rec1-LIFNR,
           17 SY-VLINE,
           18 WA_IT_succ_rec1-BUKRS,
           31 SY-VLINE,
           32 WA_IT_succ_rec1-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_succ_rec1.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_changed_report
*&      Form display_nochange_report
Form to display No Changed data for Vendors
form display_nochange_report .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O12.       " No Changes List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O13.       " No Changes List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_noupdate INTO WA_IT_noupdate.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_noupdate-LIFNR,
           17 SY-VLINE,
           18 WA_IT_noupdate-BUKRS,
           31 SY-VLINE,
           32 WA_IT_noupdate-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_noupdate.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_nochange_report
*&      Form ERROR_RECORD_DATA1
Form to get Error Message for Changed Vendors
form ERROR_RECORD_DATA1 .
DATA : L_LINES TYPE I,
         L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
    CLEAR L_MSG.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID        = WA_IT_MESSTAB-MSGID
        LANG      = SY-LANGU
        NO        = WA_IT_MESSTAB-MSGNR
        V1        = WA_IT_MESSTAB-MSGV1
        V2        = WA_IT_MESSTAB-MSGV2
        V3        = WA_IT_MESSTAB-MSGV3
        V4        = WA_IT_MESSTAB-MSGV4
      IMPORTING
        MSG       = L_MSG
      EXCEPTIONS
        NOT_FOUND = 1
        OTHERS    = 2.
    IF SY-SUBRC = 0.
      WA_IT_ERROR_fk02-MSG = L_MSG.
    ENDIF.
    IF P_VENMAS = 'X'.
      WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_ERROR_fk02 TO IT_ERROR_fk02.
    CLEAR WA_IT_ERROR_fk02.
ENDIF.
endform.                    " ERROR_RECORD_DATA1
*&      Form display_error_report_fk01
Form to display Error Report for Master Vendors (FK01)
form display_error_report_fk01 .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O05.     " Error List for Vendor Master (FK01)
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O06.     " Error List for Vendor Master Extended (FK01)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR_fk01 INTO WA_IT_ERROR_fk01.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_ERROR_fk01-LIFNR,
           17 SY-VLINE,
           18 WA_IT_ERROR_fk01-BUKRS,
           31 SY-VLINE,
           32 WA_IT_ERROR_fk01-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_ERROR_fk01.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_error_report_fk01
*&      Form display_error_report_fk02
Form to display Error Report for changed Vendors (FK02)
form display_error_report_fk02 .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O14.     " Error List for Vendor Master (FK02)
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O15.     " Error List for Vendor Master Extended (FK02)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number

At new statement for Summary report

Hi,
I have made a vendor balance report having debit and credit entry in on eintrenal table IT_BSIK, with all line item detail in another table IT_TAB1 i want to make summry report by adding all the amount of of line item it is also working fine but i wan tto change the summary report i want summary for debit and credit entery seperate How to do it find Below the code part for summary how to use AT NEW SHKZG then append the IT_TAB1
find the code here.
**********************summarised part
   loop at it_lfnr.
      Clear : VTOTBAL, vNtdue, vDue, vDue0, vDue31, vDue61, vDue91,V1TOTBAL.
      loop at it_bsik where lifnr = it_lfnr-lifnr.
          IT_TAB1-LIFNR = IT_BSIK-LIFNR.
          IT_TAB1-BUKRS = IT_BSIK-BUKRS.
          IT_TAB1-SAKNR = IT_BSIK-SAKNR.
          IT_tab1-NAME1 = IT_bsik-NAME1.
         ADD IT_BSIK-dmbtr TO V1TOTBAL.
         move V1TOTBAL TO IT_TAB1-dmBTR.
         ADD IT_BSIK-WRBTR TO VTOTBAL.
         move VTOTBAL TO IT_TAB1-WRBTR.
         MOVE IT_BSIK-WAERS TO IT_TAB1-WAERS.
         ADD IT_BSIK-NTDUE TO VNTDUE.
         move VNTDUE TO IT_TAB1-NTDUE.
         ADD IT_BSIK-DUE TO VDUE.
         move VDUE TO IT_TAB1-DUE.
         ADD IT_BSIK-DUE0 TO VDUE0.
         move VDUE0 TO IT_TAB1-DUE0.
         ADD IT_BSIK-DUE31 TO VDUE31.
         move VDUE31 TO IT_TAB1-DUE31.
         ADD IT_BSIK-DUE61 TO VDUE61.
         move VDUE61 TO IT_TAB1-DUE61.
         ADD IT_BSIK-DUE91 TO VDUE91.
         move VDUE91 TO IT_TAB1-DUE91.
       endloop.
        append it_tab1.
   endloop.
***********************************end of summarised vendor part ***************************

Hi,
loop at it_bsik where lifnr = it_lfnr-lifnr.
if it_bsik-SHKZG eq 'Debit.
   add all your fields to table itab.
else.
   add all your fields to table itab1.
endif.
endloop.
This way you will get debit data in table itab and credit data in itab1.
Then you can use At new lifnr for both tables separately and you will be able to sum it separately.
Hope its clear.
Thanks,
Archana

Maintain Vendor for excise Invoice in STO

Hi Friends
I am doing GR against Stock transport Order and getting error as Maintain vendor for excise Invoice
I created vendor master for plant then i maintained additional purchasing data in purchasing view there i did settings as follows
Purchasing View --> Extra --> Add purchasing data --> Selected data retention at plant level
Purchasing view --> Alternative Data --> Selected purchasing here i maintained supplying plant code
Same procedure i did for receiving plant also.
After that i maintained vendor master recored excise details in J1id
Still i am getting same error
Please give your valuable inputs
Regards
Vivek
Edited by: Supergene on Jul 24, 2008 1:01 PM

Hi,
Its not necessary to selected data retention at plant level.
Have you assigned Excise Indicator (For e.g. "1") to the Vendor Master, also maintain the ECC No, Excise Reg, Division, Commissionarate, LST, CST, etc....
Then it will work for new transactions. (For old, I think it will not work)

How can i buy new battery for my macBook pro in France

Hello,
Please, someone can tell me how to find and buy new battery for my 2008 macBook pro in France ?
This one is very old, i already changed this battery one time, i think Apple store of town won't be ok to make the work cause i have made it myself one time before (it has fallen several times, almost broken, means impossible to shut the battery place but still working on). So i bought a battery to a third provider, wich doesn't work of course, try to ask to online assistance but i have to pay 30 € just to ask my question and i doesn't want...
SO WHAT IS THE SOLUTION TO CHANGE MY BATTERY ??? HELP !!!
I bought it in 2008. I don't know exactly the serie. Just know it's a 2,4 GHZ Intel Core 2 Duo.
The reference of battery is A1281 10,8V 50 Wh. Can't find it on the store. The only one i found was on a website who didn't tell it's was a fake...
Lost 85 €

Here are the International Apple support telephone numbers:
http://support.apple.com/kb/he57
I note Egypt is not listed.
Purchasing a battery from a third party vendor is a high risk proposition. Many such batteries have been found to be substandard.
I suggest that you try and contact Apple and see if you can have one shipped to you.
Ciao.

How to send a material to Vendor for Service

Hi all,
I have a requirement that I need to send a serailized material to the vendor for repair (under warranty / chargeable).
Is there any standard process in SAP to map the above requirement?
Thanks in advacne,
Babu

Prem,
Thanks for your thought.
Let me explain the process as under
When servicing a Customer equipment I replaced a Defective Material (Val. type DEF) with a New one (Val. type NEW) and I GR the DEF material against the Service order by 262 MVT. Now the DEF material in my stores. This DEF will be repaired (internal / external) and reused to the Same customer or different customer. ie. I want to get the Repaired material in my stock (Val. type REP).
For all DEF materials in my stores, I am creating Refurbishment order. The Engineer responsible for refurbishment decides that some materials are to be sent to a vendor for Repair others will be done internally.
For external services, He is creating a Refurbishment order with appropriate control key whihc will trigger a PR/PO.
My question is that after creating PO, What should I do for
1. Sending the material w r t the PO (whihc has reference to Ref. Order) with which MVType
2. After repairing, Receiving the REP material back to my stores with which MVtype
3. Capturing the Repair cost (Invoice from Vendor) to the Same material (Parameters like Account assignment, accounting indicator)
4. Any other things to be cared....
If anybody has already implemented this process, please let me know the steps
Thanks in advance,
Babu

Migration of Open Items with Old/New Vendor/Customer number

Hi All,
We are currently working on conversion of Open items. We already have data extracted from legacy system.
Question : I understood that open items extract will have vendor number from legacy and conversion of vendor master will generate new vendor numbers. So what is the best way to update open items extract with new vendor numbers.
Should be done via ABAP program using custom table to store old and new vendor numbers?
What is the best approach to old/new number updation as this issue will again pop up during other conversion objects.
Any help on this will be highly appreciated.
Thanks,
Dharmesh

Hi Dharmesh
In relation to your question about what is the best approach to the old/new recoding, I donu2019t know it exactly.
One option is yours: the custom table to store old and new vendor numbers.
Another is to use the u201CSearch termu201D field in vendor master to store the old vendor number, and the ABAP program will look for the conversion in it. Furthermore in the future the user will be able to know the old code in case he/she needs to consult something in the legacy system. If you choose this option, I would recommend make this field only u201CDisplayu201D (not u201Centryu201D) in order to prevent the user from modifying it, once you have loaded the master.
Other option could be to respect the legacy vendor numbers. It depends on the goodness of the legacy coding, technical-wise. If you selected this option, you must define the number range with u201Cnumber range flagu201D = external. In this way, when you register your vendors, you have to assign the vendor number, in this case this would be the legacy code. After the vendor loading process, you have to change the u201Cnumber range flagu201D = internal, and to change the u201Ccurrent numberu201D, typing the bigger vendor number. From that moment on, the system will assign vendor numbers automatically.
I donu2019t know if I have helped you a little. If you want me to explain some aspect better, donu2019t hesitate to ask it to me.
Best regards.
PacoM

Report on New vendor transfer from ECC to GTS

Hi we have run the batch job daily basis to transfer new vendors from ECC to GTS system, my client want to know that list of the venodors(Business Partners) has been transfered today in GTS system on particular day to screening SPL. where i can see this, or any possible solution saying that get mail notification to users - once vendors are transfered based on job batch runs.
regards
Satish

Satish,
You can see the log in System Monitoring > Transfer logs for business partners or by executing the transaction: /SAPSLL/PARTNER_APPL.
However in order to see the required logs, you need to configure the u2018Control Profile for Loggingu2019 in IMG.
Hope this helps.

Create new field for service tax no

hello,
my client wants a new field for sevice tax for vendor in cin master maintanance. how can i create.
thanks and regards
bhakta

Hi Jim,
It is sap hierarchy you can't edit it and the thread you are referring to
it is a development they have talked about which i have told you earlier itself but that will create a problem during upgrades and you need to test it everytime after upgrade so you need to check before to go for that development.
Secondly you can go for service desk XT license there is small variation and separate license to be taken and then you can use service desk for NON SAP problem
like printer not working etc
Hope it helps.
Regards
Prakhar

New Vendor in EBP 3.0

Hello Friends
We have 2 existing vendors and are now attempting to define a new vendor. We have created the Vendor in our backened R/3 4.6c system and replicated it successfully to EBP. We can create a SC with items from this vendor and subsequently a PO. The problem we are facing now is creating confirmations. When Vendor tries to create a confirmation for an of his PO's they are not visible to him thru T-CODE BBPCF02.
I debugged the T-Code and it seems we are missing some Partner Functions. I am obviously missing the obvious and have no clue.
Any help will be appreciated.
Thanks
Shalini

Hello Dave,
I did it about 5 years ago. Please check http://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/ff03d072-0501-0010-aa88-8018506a2ebe">http [original link is broken] [original link is broken] the OCI specification. You need SAP Business Connector to map data from XML and SM59 RFC destination named something like "BBP_OCI" to points the listener in SAP Business Connector.
Regards,
Masa

Default vendor for condition in Import PO

Dear Friends,
I wanted to default the vendor for conditions like JCFA(Clearing Agent Charge),JFR1(Local Freight Charge) etc in my Import PO.
For that I tried attaching the condition in the info record , but these are not visible in info record .
So I tried making condition record for these conditions in MEK1 , but its not allowing me to do, as only condition with access sequence can be maintained.
Now if I have to maintain the access sequence for these condition which should I assign .
And if I have to create a new access sequence what are the steps , do & donts for this.
Can somebody the explain the steps in detail.
Thanks

Check access sequence which is assigned to your condition types.
Now in SPRO-MM-Purchasing-Condition
Maintain condition table for purchasing organization.
Now add this condition table in your access sequence.
Now you can maintain condition record in MEK1, for purchasing organization & that too with vendor.
(Note: This is possible, provided you have seperate purchase organization for IMPORT)
Regards,
Piyush

Spilt the records based on new vendor number

Hi all,
I have a requirement where i must spilt the number of records in my internal table itab .i have to collect new vendor numbers into another internal table itab1.
Based on that,Say if my itab1 has 2000 records ,
i must spilt it taking the first 990 records and doing some posting using Bapi and again take the next 990 records and do the posting and then take the remaining 20 and post it .Can some one help me out.
my code
AT new vendor
v_count = v_count + 1.
if v_count <=950.
append itab1.
describe table itab1 lines v_lines.
v_return = v_lines mod 950.
call bapi.
what abt my last 20 records .
Note : My internal table can have at the maximum 990 records while passing to the Bapi.
Good answers will be rewarded with points.

Hai,
Instead of that select the records using the PACKAGE SIZE 990.
so here you can complete 990 records and then proceed for next 990 records, if you have only 20 you will end up with 20 records processing.
SELECT * INTO TABLE itab PACKAGE SIZE 990 FROM scarr.
"process the data here , call the BAPI or what ever
ENDSELECT
Regards
Vijay

Vendor for expenses default GL and purchase GL

I setup default GL for expense type vendor that should use AP control account like 22000 with expense GL code while purchase vendor will use AP control account like 21000 (post item receipt will debit to inventory and credit to PO clearing).
When I added new vendor that set control account to 22000 and can not change to 21000, why caused this issue? Even the Vendor group setup has Purchase Vendor, Expense Vendor, Secondary Vendor,,,etc.
How to force user to setup Expense Vendor with proper GL account in case user forgot to choose any GL code for new expense vendor?

Hi
By validating that field in the BP master every time when you add new vendor the system will gives you alert about the changing/rectifying the account code.
This you can do it with the SDK when slect perticular group of the vendor then select that perticular account
Hope this Helps
Ashish Gupte

New vendor for a rawmaterial

Similar Messages

Maybe you are looking for