New Version Conversion Board

Hello Forum users,
After recent feedback and conversations, we've decided it's time to dedicate a specific board for LabVIEW Version Conversion (replacing the existing Upconvert and Downconvert threads).
Please remember this is not a space for code discussion. This is just a space for you to post the VIs you need to be converted to an older or newer version of LabVIEW. If an issue arises where you need further assistance after the conversion has been completed (for instance, if you need the converted VI to be removed from the forums) please select "Report to a Moderator" and I will be happy help.
Enjoy the new, more organized Version Conversion board!
Jordan

RavensFan wrote:
I saw at the top of the Idea Exchange that the setting to force the search was turned on for new ideas. Maybe the setting got turned on for the Version Conversion board by mistake.
That appears to be what happened. I just mocked putting up a new idea and there was no search done before getting to type up my (non existant) idea.
But I was thinking about this while shaving this morning (I don't know why, random thoughts constantly bombard my mind). It would be nice for the Version Conversion board to have a different format for creating a new request. First of all, the button should be something like "New Conversion Request" instead of "New Message". But then that button should take you to a new page that has 2 drop downs (for LabVIEW Version From and LabVIEW Version To) and a place for attaching code. Put in notes that the file limit is 3 files and X MB and advise zipping up the code and posting the zip file. MAKE THE ATTACHED FILE REQUIRED. I guess there should probably be another field (optional) for general comments. So then this new page can autogenerate a topic name based on the two drop downs. We will get consistant topic names so we know exactly what needs done and it will be much easier for a new user of the board.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

Version Conversion Board New Message

The Version Conversion board forces somebody to search for an exceptable solution before posting a new thread. That board should not do that as it encourages people to add on to previously solved threads. I didn't have to go through that in order to create this thread.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Solved!
Go to Solution.

RavensFan wrote:
I saw at the top of the Idea Exchange that the setting to force the search was turned on for new ideas. Maybe the setting got turned on for the Version Conversion board by mistake.
That appears to be what happened. I just mocked putting up a new idea and there was no search done before getting to type up my (non existant) idea.
But I was thinking about this while shaving this morning (I don't know why, random thoughts constantly bombard my mind). It would be nice for the Version Conversion board to have a different format for creating a new request. First of all, the button should be something like "New Conversion Request" instead of "New Message". But then that button should take you to a new page that has 2 drop downs (for LabVIEW Version From and LabVIEW Version To) and a place for attaching code. Put in notes that the file limit is 3 files and X MB and advise zipping up the code and posting the zip file. MAKE THE ATTACHED FILE REQUIRED. I guess there should probably be another field (optional) for general comments. So then this new page can autogenerate a topic name based on the two drop downs. We will get consistant topic names so we know exactly what needs done and it will be much easier for a new user of the board.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Version conversion board

LabVIEW load error code 10:VI version (5.0.1) is too old to convert to the current LabVIEW version (10.0)
Could someone please convert the uploaded file to a newer version compatible with 10.0. Its very much urgent. Thanks in advance.
Attachments:
Keithley 196 vs DS345 with amp control.vi ‏135 KB
My GPIB Measurements -- Penetration Depth Experiment.vi ‏103 KB
HP34420A DC Configure & Read.vi ‏52 KB

altenbach wrote:
Bhramaji wrote:
first it need to opened in 7.1,then save it,the open with 8.5 the save it,you can open in 2010.
it is sequence followed for vi version in 7.1,may you have do it one more version older
Don't overcomplicate things, please!!!
All we need is open and save it in any version 6.0 ... 8.2, after which it can be opened in any newer version.
(Instead of giving random misinformation, you might just want to consult the version compatibility matrix instead. LabVIEW 8.2 can open anything 4.x or above, so it is a good version to keep around )
I have LabVIEW 8.2 installed specifically for these conversions. It was also the first version that was VISTA supported. Works well with Windows 7.
For those who care, the conversion was done here:http://forums.ni.com/t5/Version-Conversion/error-code-10/m-p/2609857#U2609857
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Conversion Board Rules!

1. Create a "New message"
2. In your post, please indicate:
Source LabVIEW version
Target LabVIEW Version
3. Mark the thread as solved on the message where you get the converted files. Select "Accept as Solution"
Please remember this is not a space for code discussion. This is just a space for you to post the VIs you need to be converted to an older or newer version of LabVIEW. If an issue arises where you need further assistance after the conversion has been completed (for instance, if you need the converted
VI to be removed from the forums) please select "Report to a Moderator."

RavensFan wrote:
I saw at the top of the Idea Exchange that the setting to force the search was turned on for new ideas. Maybe the setting got turned on for the Version Conversion board by mistake.
That appears to be what happened. I just mocked putting up a new idea and there was no search done before getting to type up my (non existant) idea.
But I was thinking about this while shaving this morning (I don't know why, random thoughts constantly bombard my mind). It would be nice for the Version Conversion board to have a different format for creating a new request. First of all, the button should be something like "New Conversion Request" instead of "New Message". But then that button should take you to a new page that has 2 drop downs (for LabVIEW Version From and LabVIEW Version To) and a place for attaching code. Put in notes that the file limit is 3 files and X MB and advise zipping up the code and posting the zip file. MAKE THE ATTACHED FILE REQUIRED. I guess there should probably be another field (optional) for general comments. So then this new page can autogenerate a topic name based on the two drop downs. We will get consistant topic names so we know exactly what needs done and it will be much easier for a new user of the board.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Version conversion 5.1 to 12

Can anyone please up convert these 5.1 files up to 12.0 or at least up to 11.0 version? Thanks in advance
Attachments:
attachments.zip ‏711 KB

Here is the Version Conversion Board:http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion. Repost your code there.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

I uninstalled ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.

I uninstalled and deleted ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.

Hello, Stephen.
Thank you for the question. You will need to rebuild your iTunes library file in order to open an older version of iTunes. Below, I have included the article that walks you through this process. Start with the section labeled Re-creating the iTunes Library file.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Cheers,
Jason H.

HT4636 Old Keynote conversion to newer version

Is there anyway to convert, or a work-around, getting older Keynote files to open in the newer version. Even going through PowerPoint and back?

Is there anyway to convert, or a work-around, getting older Keynote files to open in the newer version. Even going through PowerPoint and back?

Suddenly not able to open a lot of my documents due to "needing a newer version of pages"..?

I just got my Macbook Air in early december (my old macbook was getting too old), and the ONLY version of pages I have is the newest one.
Originally, it worked fine -(it was annoying and not as good as the old pages, in my opinion however) - and I had no issues for about a month. I was able to successfully open and edit all saved files. I submitted most of them to colleagues and teachers through Google Drive, although I'd always save two copies of every document I used - one for my files and one for drive storage. Suddenly, neither will open.
Just recently, my teacher informed me that he was unable to open my documents anymore. I was puzzled by this and attempted to open the document both in drive and on my computer, but was confused when it informed me I "needed a newer version of pages". I have the NEWEST version of pages. This document was saved on the NEWEST VERSION of pages.
About half of my files - both on google drive and in my storage - are now unable to open or even convert due to me getting a notification saying "I need a newer version of pages".
A lot of the files I received were downloaded through google drive as Microsoft Word files, and were automatically converted. They worked fine as a pages document when I received them, and was able to successfully work on them and complete them and then resubmit them through Google Drive. A month later, these same files will not open, due to me needing a newer version, but no newer versions are even available.
My mac also has a remote disc - everything from my old laptop was transferred to my new by apple when I bought it.
However, the old files are not the issue. It's the files that I've downloaded and editing since I bought my new laptop that are the issue.
I'm also not a genius with computers - I've used a mac since 2011, but have never really encountered issues that needed me to really "get to know" the innerly functions of the computer until now.
Help? Some of the said documents are very important to my work and I need to be able to succesfully submit them so others can open them through google drive or dropbox.

I've seen other people solve their issue this very same way, based on other conversations, but my case is different. No older version of pages exists on my laptop.
My laptop is new, so I have no older version of pages anywhere on my laptop - I never installed it.
All files that I transferred from my old laptop to my new laptop that were made using the old pages still work, but a majority of the new documents that I've created since getting my new laptop will not work.
After further investigation, the ONLY files that will not open are files that had been converted from Microsoft Word to pages and then saved.
So, on my new laptop, I would download a file from another user through Google Drive and then convert it from Word to Pages.
The pages documents worked, and I saved them successfully, and I could reopen them when I first created them.
But now, checking them again a month later, all files and only files that had been converted from word to pages say that "I need to update to a newer version of pages" - but all files that were created in pages by me work fine. And so do documents that I downloaded AS pages documents.
This is the notification I see whenever I try to open a file that was originally a word document. All ex-word format pages documents that I converted from word to pages give me this notification and will not allow me to open the document. They worked originally, but now suddenly do not.. why?

This is the best method to install a new version of Studio!

Do it cleanly. By this I mean create a new fresh startup disk for the install of Studio. Whether for Studio 1 ,2 or 3, trust me. this method will get you to a really stable FCS system.
1. Backup everything you want to keep if you're using the same drive you've been using as your startup disk. Clone it if you'd like to save time digging around for the files you want to keep. Or buy a new drive for your tower and use it as a startup disk, keeping the earlier one until you've transferred all you need from it. (I have no less than 3 startup disks for my single tower here) One is a 250 gig drive, the other two reside on their own partitions of a second physical drive. I use one system for beta testing, reinstalling the OS each beta test, and one "working" system for daily real work environments, and yet another "backup" system which is there just in case I need it. (but never really do actually).
2. Load your latest OS disk, and restart your computer from it holding down the c key during a boot up, or selecting it from the startup disk control panel in the apple system prefs.
3. Once your computer starts up from the OS disk, select "optional installs" from the button you'll see in the window. From there select "erase and install" and install will begin.
4. After the OS install, run Software update and go all the way with it. There's nada out there that's not OK to install.
5. Install Studio. If it's an upgrade version, no problem to not install the earlier version you're upgrading from. Just have it's serial number handy because FCS will ask for it as well as the upgrade serial number.
6. Run Software upgrade again to make sure all of your FCS apps are up to date. INSTALL EVERYTHING that Software Update proposes to install.
7. You'll be a very happy camper.. it will also feel like your whole computer is faster because of this clean install of the OS you did...
It's not impossible to get a fine upgrade done without doing it as I've described above, but with the latest round of problems being posted about a new install, I gotta say that this clean method will fix all the problems being posted here and elsewhere. Why even bother taking the risk? What I've posted above will be THE WAY to make sure you're system is running right.
I've espoused this method of install any time you upgrade your OS (i.e., Tiger to Leopard or the upcoming Leopard to Snow Leopard upgrades about ready to hit us all) OR any time you install a new version of FCS or even a FIRST install of the studio. It's not all that time consuming, and running pro level software really demands that the system install is totally clean.
I oversee about 75 FCS stations at the Colorado Film School, we do this clean install every semester (4 months) on the systems there, and really have incredibly stable setups. Never really having the problems that get reported all over the forums... not only that, they boot fast, run fast, and just work.
When software companies test new versions of their software in beta, it's always asked by all software manufacturers to install their beta over a clean fresh OS... always... so there's a lesson here to learn from them, and also a hint: nobody chooses the "upgrade" button for a new version of said software, rather they are testing over CLEAN installs only. Makes perfect sense then to install new versions of software as complicated as this is over a clean new OS install.
Jerry

I fully support Jerry's advice. Though it is a little like the old auto repair manual I once had. If you looked in the section under "clutch replacement", it started out like this ...
*Clutch Replacement procedure.*
• elevate car - be sure to use jack stands to support vehicle
• remove engine
• with clutch pressure plate exposed ....
Of course, they never spelled out all that was involved in the "remove engine" step. So, in the interest of adding more detail to Jerry's advice on the "erase and install" process for those who have not done it before and might be intimidated - read on.
• Make a list of all Applications to install. Which ones do you need? Go through your Applications and Utilities folder and note which ones you'll want to reinstall. Note the version.
(I don't know about you, but I had a shocking number of apps I downloaded, used for a few times and never used again. Forget installing these disused apps.)
• If you are upgrading from a PPC to an intel machine, you'll want to know if the apps are UB or PPC. Upgrading your PPC software to UB can be a significant cost in a PPC to intel conversion. Know what you are getting into - do a search before installation to see if there is a UB version available. You can find out whether an app is PPC or UB by looking in System Profiler>Software>Applications. This window will also tell you the current installed version number. Generate a .pdf file of it and have everything listed for your records.
• In the list, note whether is was a download or you have a disk. If it was a download, find the DMG or installer package and copy it to an external firewire drive. Put it in a folder titled - Apps to be installed - or something easily identifiable.
• If you need to go back to a previous version (e.g. QT 6.5.2) download the dmg file BEFORE you start the installation process.
• In the list, note if the application is a full install or an UPGRADE. If an upgrade, make sure you have the previous version's disks (as well as the serial numbers - see below).
If the UPGRADE version does not require the previous version to be present - eg when installing the upgrade version of FCP 7, DO NOT install earlier software. All you'll need is the previous serial number. The way to figure this out is to try to install the newest version. If it needs the previous version present before proceeding, the install process will tell you that.
Some upgrades will require that a version of the previous app is on the disk. If this is the case, when you install the first version, simply install the minimum so the app will be on the hard drive. You will need to do this because there will be NOTHING on the disk after you do your clean erase.
• Referencing your list, find ALL your disks before you start. This includes previous versions if you are unsure whether they will be needed.
• Spend some time looking through this forum for Professional Application installation issues. The classic example is a conflict between Logic and FCP. Install FCP first and you'll have no issues.
• Sort your list into an installation sequence. Lay out your disks in that order.
• Referencing the list, make sure you have ALL your serial numbers including those you've downloaded. I've purchased a number of programs on line and the only documentation of the serial number was an email. All those are kept in a dedicated folder in Mac Mail. For serial numbers that arrived via electronic means, use cut and paste instead of re-typing whenever possible. This will prevent errors in transcription.
In making the list, TEXT EDIT works ok, (I use Excel). Text edit has the benefit of being easily readable on any mac. Print the list out for reference, put a copy on a flash drive or a firewire drive where you can access it to cut and past serial numbers during the installation process.
• Recognize this is going to take some time. Ranting, drinking too much coffee, swearing, sitting in front of the computer watching the progress bar, etc will not make things go faster. All it will to is put you in a really bad frame of mind. Do it over a weekend when you can be multitasking. While you are cleaning off the mountains of paper on your desk or raking the yard, you can take regular breaks to check on progress.
Process -
• Download Carbon Copy Cloner or one of the other backup utilities and do a full backup of your existing system drive to an external firewire drive. Make the drive bootable. *Do not* cheap out on this as this is your insurance policy. If you forget something or can not find a serial number, you often can find it and copy it from the backup system to the newly installed version. Or, if things go horribly wrong, you can simply copy the old system back to your computer and pick up where you left off.
If you have a MacPro or G5 tower, an alternative to cloning your existing system disk is to pick up a new hard drive to use as the clean new system disk. Your existing system disk will be the clone.
• Once you have gathered and organized all the materials and backed up the drive or installed the new system drive ...
• Insert your OSX installation disk and boot the computer from the disk (Jerry explains how)
• Erase the hard drive. Use the ZEROs option as this will map out any bad sectors. This will take time. See the note above.
• Install the OS. If it is an upgrade install, see the note above regarding upgrade installs. Repair Permissions and then run the updates. Repair Permissions.
• Install your applications following your list. Make sure to Repair Permissions after each install and update..
Have fun, be prepared for a few minor glitches. If you multitask, you can get the garage/ or office cleaned out and your computer rebuilt. In all honesty, this process took all weekend plus time in the next week as I discovered apps that needed additional updates, configuration settings, etc. No doubt it would have been faster if I was sitting at the console the whole time, but I was able to get the office cleaned up and organized (which also makes ME much faster). Overall it was a very slick process.
When you have a fully functioning system again (you have tested all applications and everything works), CLONE the new system and put your info, your notes and the disks in a safe place - once you've done this once, why go through the pain of organizing this stuff again ...
Now, rejoice in a much faster machine with a lot more free disk space.
Cheers,
x

Can't install Itunes 9.2 "Newer Version of Quicktime"

I got a new itouch last week. Worked fine. Then went to update software to new OS (maybe Apple could have put this on a brand new one instead of older OS?!). Message said i needed Itunes 9.2. Went to update and got error "newer version of quicktime installed" and that i can't update since iTunes needs Quicktime. Tried several approaches, no luck. Deleted Itunes for a fresh start and then this wiped the Itouch clean which i had not at all intended. But, despite this exact same error message. I have been working on this and have used various uninstallers and searched the registry, cleaned temp folders, compressed and defragmented the hard drive. Downloaded Chrome, tried manually installing Itunes using Apple Software update, etc etc etc etc etc. Same message. Do i need to wipe the hard drive? Does anyone from Apple have any idea what to do? All message boards i have seen indicate that they do not.

Message said i needed Itunes 9.2. Went to update and got error "newer version of quicktime installed" and that i can't update since iTunes needs Quicktime. Tried several approaches, no luck.
That one has gotten complicated ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for *at least version 3.0* of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install CleanUp"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Any idea when new version of e90 is coming

Any idea when new version of e90 is coming which will emanate all previus problems.

Available in Germany..?
It is not even available to Nokia staff in Finland ..yet.
I assume that you base this statement on the links to a German web site on All About Symbian.
This was to a German message board ..like this one but run by Non Nokia people...it showed some photographs of what was claimed to be the "new E90"..
But the text (which was in German) said that it was a mock up based on what had been seen on a Nokia stand at a World Mobile phone conference in I believe Barcelona.
Photos taken of the real unit on the Nokia stand showed a black E90 with flush key pad, and with apparently new firmware, this was shown by one screen shot.
The links seem to have disappeared.
Nokia were reported to have said at Barcelona that the unit "should be" available by end 1st Q.
My contact with Nokia confirms that this is "hopefully" the case.
On the Nokia forum for designers..Nokia have instigated a drive to motivate more 3rd party SW houses to "think E90 and it's large display". So Nokia have decided to re-launch the E90.
But all this does nothing to please those of us who have already bought E90. There is no way Nokia are going to replace the cases of all E90s already in the field.

Hi, iTunes 11.1 don't tell me the duration of two or more tracks from the same album, which iTunes 10. did. How come? It is possible that the new version lacks such a possibility? Thanks

Hi, thanks to whoever will be able to respond - which the Apple assistance on line in Italy could not do, after minutes of conversation!
The point is that I cannot see anymore the total duration of two or more audio tracks selected from the same CD, but only the duration of the whole CD.
With the previous version of iTunes this was very easy, as I simply clicked on the tracks the interested me and I suddenly had the total time.
It makes no sense that Apple provides a new version which lacks one of the endless options of the program, therefore I hope it's only my faul in not being able to understand what to do. Otherwise, please tell me how can I downgrade and go back to iTunes 10....
Paul Meadow

Press CTRL+/
tt2

Create new version..create AAC version. Does it really convert 128kbs to 256kbs?

Does creating a new version of a song really convert it from 128kbs to 256? How does it do this? Is it the same quality as importing straight to 256 AAC?

alamedajoe wrote:
Does creating a new version of a song really convert it from 128kbs to 256? How does it do this? Is it the same quality as importing straight to 256 AAC?
Joe,
Yes, when you use "Create XXX Version," the resulting file will have the format and bitrate specified in your Import Preferences. If you are using the default setting, the result will be AAC/256 no matter what you started with.
As Niel notes, the conversion process does not have the ability to improve the audio quality of the original, so all you would be getting is a puffed up version with the same quality.

HT3529 New 7.0 version update changes the way text messages are presented. In the new version, I cannot figure out how to delete individual texts. I can delete entire strings of messages, but I want to delete old texts, but keep the recent texts

The new version of the software for my iPhone 4 changed the way text messages are managed.
I can no longer delete individual texts from a text "conversation." I also have not figured out how to forward texts, which I was able to do in the prior version.
Anyone know a way to edit out individual messages without losing the entire string?
Anyone know if there is a way to forward messages?

When you have the conversation open, if you tap & hold on a message bubble, you should get a new menu pop-up. It should have 2 options "Copy" and "More..." If you select the "More..." option it will then let you select one or more message bubbles and delete the selected ones by hitting the trach can icon in the lower left corner. As for forwarding, you probably just select the "Copy" option, then paste the contents into a new message...

New version of Ses2sesx posted

A new version of the donation-ware utility to convert legacy .ses session files to the new .sesx format has been posted over at AATranslator.com.
Here's a PDF outlining the changes since the last version.
Cheers,
Chad

Yeah we've been busy on some other projects - otherwise there may have been more - LOL
Most of the additional releases have been to deal with early versions of CEP or as we try to squeeze a bit more out of conversions if we discover something new.
By all means let us know if we can improve it in any way (providing it doesn't constitute too much effort on our behalf of course)

New Version Conversion Board

Similar Messages

Maybe you are looking for