New video posted on IAC Driver configuration and use with Mainstage/Logic
Shows how to configure IAC Driver for use with Mainstage and Logic.
http://www.youtube.com/watch?v=wPhtRCwz8vs
No problem, anytime...
Yes, that should work. I haven't specifically tried that but don't see why it wouldn't work so give it a go. When I was testing this IAC driver method, I did confirm that the IAC object existed in the environment in Logic and it did, so you should be good to go.
You're exactly right, both Logic and Mainstage should be active. You'll get a message saying another Rewire host is active when you open both, but just click ok and ignore it.
Here are a couple of other vids as example of what you can do with the IAC driver just to keep your brain burning
http://www.youtube.com/watch?v=XgzBOJYSY64
http://www.youtube.com/watch?v=NZL0ucV8dpo
If I have time I'll try to test it as well, it's a good idea!
Let me know how it goes or if you have any questions.
J.
Similar Messages
-
What is the ideal RAID 5 logical drive configuration to use with editing 1080p on FCPX?
Hello,
I invested in one of the new Late 2013 Mac Pros (8-core 3GHz, dual Fire Pro D500 w/ 3GM VRAM each, 32GB RAM), along with a Promise Pegasus R6 Thunderbolt (ver 1) RAID because I wanted a fast and supremely smooth editing experience versus slow, laggy, drop frame performance I had been experienceing in my previous Mac (a mid-2010 27" iMac 2.8 GHz Quad-Core, 16GB RAM, Radeon 5750 with 1GB VRAM) that had media stored on a single 3TB firewire drive.
The RAID came pre-configured with 6 x 1TB Toshiba drives giving me a Logical Drive that has 5TB capacity, 128kb stripe size, 512byte sector size, with Read Ahead/Write Back cache policy. I've also enabled "Forced Read Ahead" using terminal.
THE PROBLEM:
Even with this super fast media storage that gives me about 600MB/sec data transfer rate, I'm still sometimes experiencing lag and stuttered playback from the timeline (In all fairness, the stuttering only happens for a few seconds then plays fine, but the lag can be frustrating when I'm trying to click through the timeline to check edits). The footage I work with is 1080p mov files from Canon DSLR that are transcoded to ProRes 422 and Proxy during import into FCPX. I never edit with camera-native formats, always with ProRes. I also always close all other applications, eventhough all the power boasted by the Mac Pro shouldn't have a problem with that. I've tested the video cards by playing multiple 1080p H.264 files at once and it played about 10 simultaneously without a hitch. I've also edited under a new user and still the issue remains. My conclusion is that the lag comes from the RAID. (I did a test project with having my library saved on the internal flash storage and editing improved dramatically with speed and responsiveness, which signals that my problem must lie with the RAID).
THE QUESTION:
Is there a preferred or recommended stripe size and sector size that would cure my problem? Is it because it's RAID 5 even though I'm using 6 disks and getting tremendous sustained data xfer rates?
OTHER RELATED INFO:
My FCPX import settings copies all files into the library and I have Optimized and Proxy checked. My projects are also saved in the same library so everything is contained in one place.
My projects are mostly 40 minute wedding videos 1080p at 23.98fps with lots of short video clips during montage segments, no more than 2 video tracks during the wedding the wedding ceremony.
I frequenly repair permissions on the internal boot drive. Sometimes trash FCPX preferences when performance gets ridiculous or other glitches happen, like audio refusing to play, or the timeline plays no video just audio.
Thank you! Any help or advice is appreciated!Hi,
Making our tablespace in different directory does not improve the performance. See, Basic thing does if you are lauching your text file from different directory
say Drives C , D and F respectively does your hit any performance (your OS is installed on Drive C). I don't thinnk you will getany boost up performance. See Basicaltl what is happening is that, try to launch you textpad and try to open the files from any there then you file will open immediately, if you ask me the reason behind that, you application is already loaded in the Memory to give the Service (same as ORACLE Instance). That's the difference.
- Pavan Kumar N -
I have a 1.5 hour video of a concert from which I need to extract several 'tracks' as individual files, and then join them together in a new video. How do I do this using imovie?
Adobe has made this process much simpler in recent years.
No need to re-install any version earlier than the current version (CS6). All installers (upgrade or full) contain the full program code. The difference between full and upgrade is in the serial number.
All you need do is download (link below) and install CS6, enter the CS6 upgrade serial number then enter the CS5 serial number (even if that too is an upgrade).
Download CS6 products -
I am new to MAC. I have an external hard drive that I used with my former computer running Windows XP. Can I reformat it to use with my new MAC? If so, how do I do it?
Yes you can. See the following:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size. -
How to configure and use StartTLS on Windows AD server (2008 R2 or 2012) ?
I would like to use port 389 with secure ldap using StartTLS, i.e ldap over TLS. I could not find documentation to configure and use ldap over tls using port 389 with the implementation of StartTLS command. Though I could find documentation on secure ldap
on port 636. Please help.Hello,
see about self-signed certificates in
http://support.microsoft.com/kb/321051/en-us and how to enable them in AD.
Please see if steps in
https://kb.meraki.com/knowledge_base/certificate-requirements-for-tls will help you.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
When opening the version of Iphoto i have an error message appears that says; You can't open your current iphoto library using this version of Iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto. What? If I can't open the current library using the latest version of iphoto, and I am asked to make changes the the newest version!!! I'm asked to run in circles chasing my tail...I had a new hard drive installed about 6 weeks ago. I am running MAC OS 10.5.8
What version of iPhoto do you have? If you're on 10.5 then you're not running the latest iPhoto
Any chance that the library was opened with another version?
Simplest solution will be to just restore from your back up. -
how do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?
Ok.
I am connected to wi-fi through TC connected to a specific router and is working perfectly and saving data through TM without any issues.
The TC version is 7.6.1 and am using OS 10.7.3
The router mode is on Bridge mode and router is connected to TC through USB cable, I suppose for internet access. My Mac is on wi-fi through TC
I have another location, much further, which recently have been installed with wi-fi through router that has WPA accessibiulity with password, 100% different than the current one.
Since, I will be most of my time in this new location, I wish to move my TC to this new location, and configure it in similar fashion like what I am having right now.
Naturally, I do not wish to lose any saved data on the TC.
Hope I managed to provide enought info.
Thanks in advance -
LaCie 6TB drive ejects when Air sleeps: I use two 6TB LaCie drives - home and office with my Air, which travels with me between the locations. Only have a problem with one that inappropriately ejects when the Air sleeps (and only sometimes). Is there a fix? I've read others who believe that the problem is with the operating system (I'm using 10.9.2). But my problem suggests that it's with one of the LaCie's. Any suggestions about how to fix?
Lacie doesnt make HD, thats a Seagate inside the box.
Is there a fix?
Yes, get a 4TB max HD, 6TB drives are both new and have known issues, ...in fact so do most all 4TB drives.
my problem suggests that it's with one of the LaCie's
You mean Seagate
Large external hard drives are great! Large external hard drives are horrible
It is a common premise that people are overjoyed at the dropping prices per terabyte on external hard drives, and the first thing that enters most peoples minds is "great, I can put all my stuff on one drive,... all of it!" However considerations need to be made in creating a giant single choke point for not mere data loss, but seriously large data loss. If there is at the very least yet another redundant copy, this is fine, otherwise do not consider it whatsoever. Some 3TB and 4TB drives of all mfg. have, at the time of this writing, reliability concerns currently and best recommendation is staying at 2TB drives or less.
Advantages and disadvantages of larger 3TB and 4TB external drives must be weighed -
Hi Experts,
Iam new to KM.We need to configure KM for our client. When I surfed internet ,I can see only explanation on KM but I need steps for configuration and details about how well KM can be used. Share me the documents,procedures and steps to configure and use KM.
Currently Iam working on KM Navigation Iview and I have following doubts
1) Is there a way to allot some space in KM automatically when users are newly created.Under Userhome link of KM , for the newly created users a seperate link is automatically created .Do I have to assign that to user for using KM.
2)Can we restrict space for each user in KM.
3)How to configure and customize context menu in KM navigation iview.
Regards
Karthiheyan MurugesanHi Karthiheyan,
Still I have further requirement like How to transfer all datas of KM from one server to a new server for all the users (also how to create back up?
Through KM Tranport you can transport the contents from server to server
For KM content transport go through the below help document
http://help.sap.com/saphelp_nw70/helpdata/en/46/7649426fd759dbe10000000a1553f6/frameset.htm
How to customize the various options like view , actions ,settings present under Details option?
For the context menu of folder New->Forms->...How to restrict this forms visibility?
This can be done using the Layout set,there you will be having collection render,resource render,details setting through which the options can be customized and the customized layout should be used in field layout set in the KM Navigation Iview.For further understanding go through the below document.
http://help.sap.com/saphelp_nw70/helpdata/en/30/504a1e7f0e354bbf9adedf1a29f3ec/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8?QuickLink=index&overridelayout=true
Naga -
I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...
iPhoto is Apple's included program to manage your photo's and pictures.
It receives updates over time with Software updates and new machine or iLife purchases.
When iPhoto gets updated or a newer version is used, it may alter iPhoto support files, but newer iPhoto versions usually always compatible with older files which it then updates.
If you used a newer iPhoto on your iPhoto support files, then they got altered to the newer format, older iPhoto versions can't read the older format.
Somewhere along the line you somehow got a older version of iPhoto on your computer, you need to fine the newer version of iPhoto (not this photo manager, sounds like another program)
Or somewhere along the line you used a newer iPhoto version (like on another Mac) and it altered the iPhoto support files on your older version of iPhoto.
So the key here is to find the newest version of iPhoto and use that to access your iPhoto support files.
If you didn't access your iPhoto support files from another Mac, then you should have the newer iPhoto version on your computer.
Once you find it, and get it in the Dock, you should remove the older iPhoto version from your computer to prevent this from happening again.
Lastly, if the newer version of iPhoto is somehow gone off your computer, you should be able to get a copy off the latest OS X install disk or iLife using a free program called Pacifist.
http://www.charlessoft.com/
Then you need to check for updates for iPhoto in the program itself, the current version is 9.1.2 -
I keep getting this message. What do I do? You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.
https://itunes.apple.com/ca/app/iphoto/id408981381?l=en&mt=12
-
Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto." I wouldn't have a clue as to how to change to a new version of iphoto even if I wanted to.
If you don't have a backup you can resort to give this a try:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT -
My hard drive crashed and using my back up, it seems my Mac mail is corrupted. How do I delete and start over?
If you are a resident of the U.S., have iTunes 10.3 or later, you can re download purchases for free.
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How to configure and use labview using java
I want to configure and use labview in my application using java, please help me out with a solution how i can configure it (like providing input to labview and getting output from labview in java ).
Thanks,
ATFDid you try a search?
Or: How Do I Integrate Java with National Instruments Software Products? -
How to configure and use jboss cache
Hi,
I need to use Jboss Cache in our application,
But i don't know anything about Jboss Cache...
can u tell me requirements and configuration for this?
and i am using jboss application server 3.2.3..
and apache-ant-1.7.1, jdk1.6.0_06, jbosscache 2.2.0
can u tell me how to configure and use jboss cache?
Thanks & Regards
ThilkumarGo to the JBoss web site and read up on the documentation there.
And if you still have any questions you'll probably get better answers at the JBoss forums than in these forums.
- Roy
Maybe you are looking for
-
Does ExtendScript have a concept of "main" function/method like when script is included as a library
I was just wondering whether ExtendScript has any concept like a main method, whereby if the current script is included by another script like a library import it will not execute this main function/method and only execute it when the script is run d
-
Oracle.jdbc.driver.OracleDriver cannot be found !
Hi, I'm using VisualAge 4.0 and WebSphere Application Server 3.5.5 I have an error when i execute my application (with java -jar myapp.jar) : "Impossible to find jdbc driver class oracle.jdbc.driver.OracleDriver which has been specified" I have insta
-
IPhone (1st generation) not syncing all emails
My iPhone is not syncing all of my email. Dozens of emails sent from my iMAC are not showing on my iPhone. Any suggestions for restoring this function?
-
Photoshop CC fail to open after update
I tried to update Photoshop CC, but got an error message saying the update had failed. Now I can't open Photoshop CC at all. The program displays an error message essentially saying that the procedure entry point could not be located. Thoughts
-
HT4623 I can't restore my iphone 4. I keep getting a error message.
I keep trying to restore and update my iphone4. It extracts files and prepares for restore, then it gives me an unknown error message. And my iphone won't let me do anything until I connect to itunes. What can I do?