New View

Hi Guys,
I need to create the new view in Material master record.
Apart from standard views , we required to create a view like MT system view at company code level in material master.
Thanks
Rosh

hi
go with new enhancement.
regards
ram

Similar Messages

Create a new view in a enhance component

Hi All,
I want to create a new view for sales order and quatation in a component BP_factsheet.When i craete new view ,it is asking about some value like model node, bol entity, higher level, bol realtion.after that is is asking context node ,bsp application ,custome controller and view type.How can i get these value .when i create a new view then have to add these view in run time repositry under a window or not?
Thanks in advance....
Vishwas

Hello Vishwas,
You might be interested in knowing how to customise the new UI to add a new view using the enhancement concept.
Please refer to the published document on the service marketplace:
http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
refers to the link at
service.sap.com/okp
Inside this go to:
SAP CRM 2006s: Learning Map for Technology Consultants
wherein you can find the cookbook to perform similar operation in detail.
SAP CRM UI Cookbook
I hope this helps.

Opening a new view in a new window on click of a table row entry.

Hi Guys,
How to open a new View of a same application in a new window (just like a pop up) on a click of a Table Row entry?
I am using NWDS 7.0 version. So please suggest acccorrdingly.

Hi Nikesh,
first of all you will have to declare use of onLeadSelect event handler for your table (note that it will only be triggered when a lead selection occurs not a multiselection).
Also, you can build at design time a View and a Window (for example, PopupWin) in your WebDynpro Component, and embed the view into the window.
In your code for onLeadSelect function, you can use something like this to pop up the window.
public void onActionRowSelection(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionSeleccionTabla(ServerEvent)
    IWDWindowManager windowManager = wdComponentAPI.getWindowManager();
    IWDWindowInfo windowInfo = wdComponentAPI.getComponentInfo().findInWindows("PopupWin");
    IWDWindow window = windowManager.createModalWindow(windowInfo);
    window.setWindowPosition(WDWindowPos.CENTER);
    window.setWindowSize(new WDCssSize(450, WDWindowUnitOfLength.PX) , WDCssSize.UNDEFINED);
    // Store handle ti window in context attribute to able to close it later
    wdContext.currentContextElement().setPopup(window);
    window.show();
    //@@end
Hope it helps,
David

Creating a new view in a component

HI,
I am trying to create a new view in a BSP component using the wizard. But the context nodes are not getting created. Its throwing up an error - "View not copied with wizard; processing not possible".
What could be the problem ? Pls help.
Regards,
Aravind.

Hi Arvind,
Before posting error, please search for it.
Here is what i found here in 2007 forum itself.
I guess you have not enhanced your component and your view.
Without enhancing the component it is not possible to add a new context node.
Here is a very helpful, follow it and the the other link within this thread,
both are very useful in this regard.
Web Client Context Node Enhancement
Thanks & Regards
Shiven

How to add a new view in Factsheet to collect data from R3

Hi Experts,
I need to add a new view in Account Factsheet called 'Open Delivery data'
which will collect the delivery data from R3 system.
As I know we have two Function Modules (at CRM) 'CRMT_ERP_FACT_SHEET_RETRIEVE'
(at R3) 'CRM_CCKPT_EXPORTSUMMARY'
All We need to do is create view which calls the data from R3 Via these modules.
How should I proceed.
Is this relevent steps :-
http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
Regards,
Ram

Hi Sandeep,
To add a new currency in Metadata, just add in Currencies dimension, and to add in Data form-just send the script what you are using as of now for rest of the currencies, or follow the same steps as specified above. or just add the script A#CLORATE.w#Periodic.C2#XYZ in rows of your data form (where XYZ- is the new currency).
To add a new location in FDM login to FDM web client- click on Metadata--> locations and select the Controls review location where you want to add the data load location, right click and add the new location.

Adding new view to viewset (BP_DATA to ICCMP_BP_DETAIL)

Hello Experts !
We are on CRM 7.0. I want to add the window IDNumber of component BP_DATA in the component ICCMP_BP_DETAIL.
What are the steps to follow?
I created an "usage" of the component BP_DATA in the component ICCMP_BP_DETAIL. I added the interface view BP_DATA/IdNumberWindow to the usage.
I also created a new view area ('ZIdNumberData') in the viewset ICCMP_BP_DETAIL/BuPaCreateVS. Then, I assign the view of my usage BP_DATA to this new view area.
I enhance the BuPaCreateVS.htm by adding a new line to the code like this:
 <thtmlb:gridCell columnIndex = "1"
 rowIndex = "3" >
 <bsp:call comp_id = "<%= controller->GET_VIEWAREA_CONTENT_ID( 'ZIdNumberData' ) %>"
 url = "<%= controller->GET_VIEWAREA_CONTENT_URL( 'ZIdNumberData' ) %>" />
</thtmlb:gridCell>
But when I enter the webui it's giving me a DUMP in the view BP_DATA/AccountIDNumberList, the method DO_PREPARE_OUTPUT, because the following reference is initial:
ME->VIEW_GROUP_CONTEXT
The reference ME has the following value:
Does anybody has any suggestions ?
Thank you in advance
M.

Hi,
 Some components are meant to be used with a main component. The view group context is inherited hierarchically from parent components. Coming to your problem, assuming that the BP_DATA/AccountIDNumberList view is already enhanced, redefine the method set_view_group_context method im the IMPL class.
Put in code, something like this..
method SET_VIEW_GROUP_CONTEXT.
IF iv_parent_context IS BOUND.
 CALL METHOD super->set_view_group_context
 EXPORTING
 iv_parent_context = iv_parent_context
 iv_first_time = iv_first_time.
ELSE.
 CREATE OBJECT me->view_group_context
 TYPE cl_bsp_wd_view_group_context.
ENDIF.
endmethod.
This will clear up the immediate issue, but you will likely face more.
Regards,
Arun Prakash

Adding New View Objects/Link on "Preview and Print" - Order Acknowledgement

Hi,
Can we add New View Objects/View Links for the existing "Preview and Print" Order Acknowledgement.
I want to add for the 2 new functionalities i.e., for Charges (from OE_PRICE_ADJUSTMENTS_V ) and the Line Level Notes, which is currently not supported by Oracle.
Can anyone help me on acheving this functionality?
Looking forward for your response.
Thanks in advance,
Regards,
Muru

You can do that. You should first create the new business objects(AM, VO, VL) in jdeveloper, create your new regions in jdeveloper, associate the AM to the top level region(stackLayout) you create. Use personalization and add a stack layout in the Preview and Print page, set the extends property to point to the new region which you had created. Donot forget to deploy all the files in middle tier before doing the personalization.
The AM which you had added to the stackLayout will automatically be nested with the root AM of the page during runtime.

How to create a new view by copying from standard view in IC webclient?

Hello, expert,
I need to enhance a sap standard component (BP_Factsheet), inside it I need to create a new view by copying from an existing standard view (Acitivities). However when I try to make a copy, I was asked for destination BSP application, I entered the Z-Application which I used when defining enhancement for the component. After the copy, I don't see the new view.
Then I tried the destination BP_factsheet, instead of the z-application, then after the copy, I can see the new view. However since it's in SAP application, it seems like it's a MOD, not enhancemnet, and inside the new view, the classes (for context, context nodes, etc.) are not in custom namespace (not starting with Z).
So please let me know how can I make a copy of sap standar view in custom namespace.
Thanks in advance.
Jayson

When copying you can put any BSP name..normally the practice is to prefix the standard name with a Z.
Secondly when you want to make changes to the individual classes and methods you need to right click and say enhance. Then the AZ class names etc would be generated. The view should appear in the component wherein you copied the original view from.
I hope this helps.
The cookbook should have details on this. Otherwise also its quite intuitive.
Award points if it helps.
Thanks.

Create a new view on Reports section

I have tried to create a new view on the "Reports" section in SCSM 2012 SP1 and here is my final MP:
<ManagementPack xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" ContentReadable="true" SchemaVersion="1.1" OriginalSchemaVersion="1.1">
<Manifest>
<Identity>
<ID>SG.Report.Library</ID>
<Version>1.0.0.0</Version>
</Identity>
<Name>SG Report Library</Name>
<References>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SMReport">
<ID>Microsoft.SystemCenter.Report.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
</Manifest>
<Presentation>
<Folders>
<Folder ID="Folder.SGReporting" Accessibility="Public" ParentFolder="SMReport!ServiceManager" />
</Folders>
</Presentation>
<LanguagePacks>
<LanguagePack ID="ENU" IsDefault="true">
<DisplayStrings>
<DisplayString ElementID="SG.Report.Library">
<Name>SG Report Library</Name>
<Description />
</DisplayString>
<DisplayString ElementID="Folder.SGReporting">
<Name>SG Reports</Name>
<Description>Contains SG reports</Description>
</DisplayString>
</DisplayStrings>
</LanguagePack>
</LanguagePacks>
<Resources>
</Resources>
</ManagementPack>
I can see the MP is imported successfully, Then I query the DB for folder:
select * from Folder
where folderName like '%report%'
which gives me some rows containing the folder with parentID = '77C85F13-0D2F-5989-F175-781DE54AD627'
this GUID belongs to "ServiceManager" folder which is the parent folder of "reports" section.
All goes well without error, yet the folder does not show up!
I have tried sealing the Mp but still to no avail.
What I have done wrong?
YSobhdel

you have to use the MM01 tocde and enter the mateial you want extend for new view. system will propose the view and select the new view.
Or use MM50 for mass

Unable to create a new view for SAP UI5 in NWDS

Hi UI5 Profis,
I'm just getting started with SAP UI5 and wanted to create and run my first application using the UI5 Tools wirh NWDS. After having installed NWDS and the UI5 Tools
I create new SAP ui5 project, but the wizard always run into error, when I want to create new view.
Did someone already have the same issue?
Thanks in advance,
BR,
Berenger

Hi Berenger,
Which is your NWDS version?
It seems there is a bug on view creation with 1.8.8 version:
1814417 - Patched version 1.8.8 of UI Development Toolkit for HTML5
http://service.sap.com/sap/support/notes/1814417
Kind regards

Creating a new view to search local database

SA
i need to create a new view that searches my local db for certain clumns
and i need the filter to have drop down lists based on my instace variables objects
any suggesstions please ?

You cannot implement that functionality using the Workspace views. I suggest having a screenflow that uses a JSP to display the information in the way you want. This screenflow can be exposed as a global activity.

Adding a new view in Account Identification

We have a requirement to add a new view beside Installed Base| Object.
I maintained entries in Object Component and Ac Identification Profile.
While navigating to the new view there is an exception.
Cannot display view CRMCMP_BPIDENT/ObjectCompVs of UI Component CRMCMP_BPIDENT
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - Window 'dynObjCompMainWin' is not defined in the component 'ICCMP_BP_DETAIL'
Method: CL_BSP_WD_COMPONENT_USAGE=>GET_INTERFACE_VIEW_CONTR
Source Text Row: 28
When I investigated this further I found out that standard SAP expects the window name 'dynObjCompMainWin', however when we enhance the component and add a new window, the generated name is 'ZICCMP_BP_DETL/dynObjCompMainWin (default)' and hence it fails.
Has anyone faced this or knows a workaround?
This is a crucial requirement, your help is appreciated.

Hello,
Guess you might have resolved this issue but incase you didn't go to runtime repository and click on the XML source code and then change the Window name to ' dynObjCompMainWin' it will resolve the issue.
I was facing the same issue and I changed the window name in the XML source code it worked for me.
Edited by: reddyp_p on Jan 25, 2012 4:15 PM

Inserting a new view in place of already existed once

Hai folks,
In Ic Webclient on crm 5.0 system i got an issue
In identify customer View set
i have removed the view of regestered product
and want to insert a view bupaLongTexts there(in that deleted area)
I am able to remove the view by removing the view name in the navigation links
in BuPaViewsets in a customized design time repository zcrm_ic_dt_rep
of a customized Run.Time. repository zcrm_ic_rt_rep.
but For inserting a new view..
I am getting fault .
I inserted the view in the navigation link flow in Product (view area content id)..
and copied customized view BuPaIdentifycustomer and adjusted the code for a new viewset vision.
I took care of profile settings too.
Is there any thing to take care.. and what is this view area content id.
Please reply this..Its my urgent requirement.
Useful answers are rewarded..
Bye..
satish

Hi Sathish,
Instead of doing so much thing why dont u just go to spro->crm-icwc->customerspecificmodifications and just replace the existing view with the new view of ur application.
thanks,
ashish.

Create a new view in Material Master

Hi All,
I need to create a new view in the Material Master (Tcode - MM*)
Can anyone let me know how can this be attained. Can this be attained by configuration.
Regards
Simin.R

you have to use the MM01 tocde and enter the mateial you want extend for new view. system will propose the view and select the new view.
Or use MM50 for mass

Create a new view under a component in IC Webclient UI

Hi ,
Can anyone tell how to create a new view under a component in IC Webclient UI.
Regards,
Sijo

Depends what kind of view you are talking about. In any case first go to runtime repository on the left panel of the component and then click the edit button.
If you are talking about interface view, right click the component interface and choose "Add interface view". The created view is added to the selected window in the runtime repository.
If you want to add view to the window right click the windows component and select "Add view".
Select the view using the f4 help and save the runtime repository.

Need to add a new View With ITS Link in it

Hello All ,
I am Working on SAP CRM 7.0 in Marketing here in marketing We do have an Account Work Center here in account we have three views Search , Create and Report .I want to add a new view with name "XYZ" in this view i want have Logical links . This logical link is ITS (Transaction Launcher ). Can any one Tell me the Procedure for this . Thanks in Advance
regards,
KiranPosanapalli

Solved by myself

New View

Similar Messages

Maybe you are looking for