New voice file for E7 Text-to-Speech

Hi,
There is only one Language/voice file available in my Nokia E7. I want to have a female voice and there is no download available for E7 (on download language and voide webpage: http://europe.nokia.com/support/product-support/text-to-speech).
please help.
Thanks.

Hello friend_kumar, try this link http://europe.nokia.com/support/product-support/text-to-speech or go to settings>phone>speech>options>download languages.
Nokia C7

Similar Messages

I am looking for a text to speech app that supports the Books App?

I am looking for a text to speech app that supports the Books App?

If Settings -> General -> Accessibility -> VoiceOver does not work, then it is unlikely iBooks will do text to speach on its own in the current version.
<http://www.apple.com/feedback>
I know that some competing services, Kindle, Nook, etc... are restricted in doing text to speach by the book publishers.
If this is text in a PDF (not an ebook), then maybe there is another app that can to text to speach on PDFs.
If it is published books that are of interest, there is Audible.com <http://www.audible.com/>
In theory it should be possible to use the Mac OS X Text to Speach facilities to convert a document into an audio file, and they sync that to the iPod Touch. I assume there is similar text to speach utilities for Windows systems.
I'm also guessing that there are web sites dedicated to assisting sight impaired individuals that might provide ideas for getting text to speach options for the iPod Touch.

Need new result file for each iteration of a loop

I am using TestStand 2010 SP1. I have a main sequence that essentially does the following:
Initialize the test equipment and set up the test environment [Sequence Call]
Start Loop
Run Tests [Sequence Call]
End Loop
Because testing can continue for hours, the resultant report file is enormous and difficult to evaluate. I need to create a new result file for each loop iteration. I know that starting a new execution of “Run Tests” will create a result file for each iteration of the loop, but the new execution will not have access to the handles to the test equipment that were made during initialization. The testing is time critical, therefore initializing the test equipment and setting up the test environment must occur outside of the loop.
How can I programmatically create a new result file at the beginning of the loop and close the result file at the end of the loop? I am open to any other suggestions. Thank you in advance for your help!

Hi,
You could modify your process model by making a copy of Test UUTs entry point. Then make the loop that usually tests multiple UUTs into your loop. Take the loop and init out of your sequence. You can init in PreUUTLoop or the other pre loop sequence, and maybe store your references in runstate.root.Locals and pass them to MainSequence. Then you can use Report Options to set it for separate report files.
cc

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

Jeannot7 wrote:
I'm interested in seeing who gets the D7100 support first? Apple or Adobe!! I will go with the one that gets it out first.
FWIW,
Adobe keeps a quarterly release schedule for RAW updates. The current Lightroom 4.4 RC expires on 5/31/2013 which typically is an indication that the official release will be close to that date. According to the current list of new supported cameras, the Nikon D7100 is not slated to be supported (but that could change on release).
http://labs.adobe.com/technologies/lightroom4-4/?tabID=details#tabTop
The most likely time frame for Adobe support of the D7100 will be sometime in August or September 2013 (although there will probably be a Lightroom 4.5 RC available prior to that for testing purposes).

How to install knowledge base file for oracle text

how to install knowledge base file for oracle text?
there are couple of files droldUS.dat,.. which are required to generate gists and themes, where can i find them or install them.
please help!

I checked the download page and it says:
"All Release 2 download pages contain Oracle Companion, Client, Clusterware, Gateways, and Application Express standalone downloads"
so you should already have it. Try searching for the filename that was in your error message.

Saving a voice file from a text on my pixi

My husband sent me a voice recording via text and I want to know how I can save it to my phone? I want to possibly use it for a text tone too. Is that possible?
Post relates to: Pixi p120eww (Sprint)
This question was solved.
View Solution.

oldpalmtreouser said,
'You need to connect your phone and enable mode. Locate and open the attachments folder then look for the MMS folder and search the filename of that attachment. You can then copy that to your music folder and you can set it as a text tone or ringtone. By the way, what is the file type of that file? is it an MP3 file? if not, it's not going to work with the Pixi.'
Do you do it this way for a Palm Pre+? I've been wondering how this is done ever since I've had my Palm! And that's been for almost a year now! LOL!

AME Bug: Creates new CFA file for each clip queued!

Here is my workflow: I have a 60 minute sequence of a dance performance of about 20 dances. I queued in AME 20 exports to H.264 files by moving the workspace to the segment I want to export, adding it to the queue with a file name, and repeating for the next section (dance).
For each queued export I make a copy so I have a low and high resolution export (40 in total). Finally, the last queued export is a MPEG DVD file for Encore.
The issue is that when I start the queue, the first thing AME does is conform the ENTIRE SEQUENCE'S AUDIO (not just the clip). Then it starts the export. On my computer (Core i7-2600, 24GB RAM), it takes over 15 minutes to conform a 60 minute sequence (the CFA ends being close to 2GB). While it's conforming the CPU load never goes above 10%. The export starts for the first clip and that takes less than 90 seconds with all 8 cores pegged at 100% and the GPU over 50%.
Then AME startes the conforming AGAIN FOR THE ENTIRE SEQUENCE instead of re-using the CFA file it just conformed!
Why doesn't it re-use the CFA file? Or, why does it conform the entire sequence if all I'm exporting is a portion?
And why isn't conforming a multi-threaded process?
At this rate, it will take all night and consume close to 50 GB of disk space in CFA files.
Here is what my queue looks like:

Actually, I think it's working as designed when it conforms upon export. See the online help HERE.
It says, in part:
Premiere Pro does conform audio in uncompressed clips when you use them in sequences with non-matching sample rates. However no conforming is done until you export the sequences or create audio preview files.
The audio in my Canon MXF file is uncompressed 16-bit Linear PCM, so when I bring in the MXF files all PPr does is create PEK files. This is really nice since I don't have to wait for conforming to begin editing. Creating PEK files is really fast compared to conforming. There is a caviat, though...
The max file size from my camera is about 2GB. Anything longer will span multiple files. If I copy the contents of the CF card from the camera to my computer, the browse to the files using PPr, it will find all the spanned clips and interpret them as one longer video file. Not problem, and that's how it's supposed to work. BUT, since PPr is treating all these spanned files as one longer video clip, it WILL conform the audio.
So to speed things up, I just bring in all the spanned files separately, then sort them and insert them into a sequence in order. It works fine, and no conforming.
My problem with AME is when it DOES finally conform, it's not re-using the CFA file. In my particular case, I'm taking one long sequence and exporting different portions of it as separate exports. I would think that AME would conform the whole sequence once, then re-use it. But no, it sees each as a separate export, so each export gets its own identical (but different named) CFA file.
So now my current workflow is:
Import in all the video as separate MXF files.
Import audio from digital recorder (house audio).
Mark the clapper sync points on the video and audio files.
Add video clips to a sequence in ascending order
Add to the sequence the audio track and align the sync markers
Balance the audio tracks with the mixer
Create a new sequence
Add to the new sequence the first sequence
Render and replace audio so I can get a waveform (it helps find edit points) and conformed audio
Add titles as needed
Edit the timeline, transitions, add Encore chapters, etc.
Export clips to AME queue
Save early and save often!

I would like to have the new license file for version 2010

Can you deliver me the new license file, compatible with Labview 2010 ? We receive an error, as shown in attachment
Attachments:
01-12-2010_155054.jpg ‏84 KB

A simple license does not include upgrade to newer versions. If you want to keep up to date at all times, look into a SSP subscription. It has many other benefits.
LabVIEW Champion . Do more with less code and in less time .

Code for "Convert Text into Speech"

I am developing a website for blinds. I need a code for read the text and convert into speech.
It is very urgent and may help for all blind people.

HI
This is very nice concept for blind people I will also try to help u...
Please refer attached file as well as there is API available of iSpeech.org use that to convert tedt to speech...
ALL D BEST.

Applying new license file for existing installation

Hi experts,
I have installed Sybase ASE 15.7 SP110 Developer Edition (DE) on a VM running RHEL 6.2 for x86_64. Now my company purchased a license for Enterprise Edition and my manager sent me a license file (*.lic). Now I'm wondering if I can apply this new license on my existing installation. If yes, could someone point me to the detailed steps to do that?

re: lmutil lmhostid ...
Make sure you've sourced the $SYBASE/SYBASE.sh script before running lmutil lmhostid; also make sure you've sourced this file before trying to start up your dataserver and backupserver.
re: license 'upgrade' ...
Making quite a few assumptions (eg, this is a unserved license; the manager entered the correct hostid when generating the license; the license is appropriate for your vm in terms of license type and number of licenses; the new license isn't a subcapacity license; etc, etc, etc) ...
If your dataserver is up and running you can use the sp_lmconfig stored proc to change your license information. In particular you're looking to reset the edition type (PE) and license type (LT) settings to match the settings in your new license.
If your dataseerver is down/not-running, you can make the same changes by updating the $SYBASE/ASE*/sysam/<DSQUERY>.properties file. Using an ascii text editor (eg, vi) you want to change the PE/LT values to match what's in your license. [I typically go ahead and remove all of the lines that look like hex code values.] [Obviously (?) make a copy of the <DSQUERY>.properties file before you edit it.]
Where it starts getting tricky is when my list of assumptions are incorrect, eg, manager generated a served licensed (so you may need to setup a license manager), manager used the wrong hostid (in which case the license will need to be turned in and regenerated with the correct info), you've got a subcapacity license (in which case you'll likely need to make some other changes to the <DSQUERY>.properties files ... assuming the correct subcap license tag/id was provided when the license was generated), etc, etc, etc. [And you may want to find a few chickens ... for sacrifices to the SYSAM gods ... just in case.]

How do I create a new .DS_Store file for the Desktop?

I have an account, in this case it is the System Administrator account (which I seldom use), where the Desktop icons all scrunch up to the right side of the screen. I can re-arrange them, but when I log out and sign back on, the icons are shifted back to the right side of the screen. I thought perhaps I had a corrupted .DS_Store file that needed to be removed. However, it turns out that I can find no .DS_Store file to remove for this account. Finder just doesn't seem to be able to create a new one. I'm not sure how or when the old one disappeared.
Any suggestions how I can get the Finder or something else to create a new .DS_Store for the Desktop so that icons will stay put?

I think I found an answer (not a solution) to my problem. Consulting with Apple Support, there is no way for the System Administrator's desktop to "remember" the positions of icons from one session to the next. They will always move to the right-hand side of the screen when you log back in. Apparently this is a change that occurred with OS 10.6.4. No reason by Apple given for the change, nor is it readily apparent to me why the Desktop or Finder in the System Admin account should work any differently than in any other account. Might simply be an oversight or a bug.
If anybody has a fix, I would appreciate learning about it.

Copying a new .class file for WLS to use, proper way?

Hello. I'm doing some servlet development and I would like to know what is
the proper way to deploy any .class files and servlets (also .class files)?
If I just copy them into the proper directory, am I supposed to have to
restart the server? Is that normal, or should WLS just pick up the new one?
It does that with JSPs, can it do that with servlets and supporting classes?
Thanks.

I found out that I was copying the wrong file to the right place (.java
instead of the .class :<). So once I fixed that small little :> problem, I
was off and running. Thank you for your help! :>
"Slava Imeshev" <[email protected]> wrote in message
news:[email protected]..
Hi Peter,
Normally weblogic will redeploy automatically application, either web
or ejb, without restarting the server, when it's copied to applications
directory on the server. Applications should be properly packaged.Servlets
and supported files should be in war file, ejb-s in ejb-jar files.
I'm not sure if it would work right for plain unpacked class files.
Regards,
Slava Imeshev
"PeterH" <!REMOVEBeforeSending! > wrote in message
news:[email protected]..
Hello. I'm doing some servlet development and I would like to know whatis
the proper way to deploy any .class files and servlets (also .classfiles)?
If I just copy them into the proper directory, am I supposed to have to
restart the server? Is that normal, or should WLS just pick up the newone?
It does that with JSPs, can it do that with servlets and supportingclasses?
Thanks.

Create new log file for every 1000 points

Is it possible to have a new file/folder for every 1000 data points ?
How do you check number of points written to a file?

Need A LOT more context here. How are you logging the data? Where is the data coming from? What format are you saving the data?
Any code you can supply that would give us context would help us help you.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

New response files for Beta 3 RC and Production release - Official ones

** Response file to perform silent install of Oracle Database 10g Express Edition **
** Values for the following variables are configurable: **
** szDir - Provide a valid path **
** TNSPort - Provide any valid available port number **
** MTSPort - Provide any valid available port number **
** HTTPPort - Provide any valid available port number **
** SYSPassword - Provide a valid password string **
** bOpt1 - 1 or 0 : 1 launches the Database Homepage at end of install and 0 doesn't **
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-DlgOrder]
Dlg0={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdWelcome-0
Count=9
Dlg1={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdLicense2Rtf-0
Dlg2={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdComponentDialog-0
Dlg3={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskTNSPort-13013
Dlg4={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskMTSPort-13012
Dlg5={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskHTTPPort-13014
Dlg3={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskSYSPassword-13011
Dlg4={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdStartCopy-0
Dlg5={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdFinish-0
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdWelcome-0]
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdLicense2Rtf-0]
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdComponentDialog-0]
szDir=C:\oraclexe\
Component-type=string
Component-count=1
Component-0=DefaultFeature
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskTNSPort-13013]
TNSPort=1521
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskMTSPort-13012]
MTSPort=2030
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskHTTPPort-13014]
HTTPPort=8080
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskSYSPassword-13011]
SYSPassword=oraclexe
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdStartCopy-0]
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdFinish-0]
Result=1
bOpt1=1
bOpt2=0

** Response file to perform silent Remove of Oracle Database 10g Express Edition **
** Note: Do not modify anything **
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-DlgOrder]
Dlg0={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdWelcomeMaint-0
Count=3
Dlg1={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-MessageBox-0
Dlg2={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdFinish-0
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdWelcomeMaint-0]
Result=303
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-MessageBox-0]
Result=6
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdFinish-0]
Result=1
bOpt1=0
bOpt2=0

Configuring textpds.conf file for running Text Query in Oracle Reports 11g

I'm trying to add a custom option in textpds situated in ORACLE_HOME\reports\conf folder by the given fileFormat:
<fileFormat name = "ProductCSV" comment = "#" delimiter ="" type = "fixed">
<columnInfo>
<cloumn name = "S.No." type = "number" startpos = "1" width = "13"/>
<column name = "Fruits" type = "string" startpos = "14" width ="10"/>
</columnInfo>
</fileFormat>
before end tag of textPDS.
but it is not getting reflected on my report wizard. I tried to remove all the existing fileFormats still no changes occur.
Can anyone help me in my problem ?
Note: I have restarted the reporting tool once the modification is done.

For the more clarification, I have used JDBC Query as Data source type and Database connected via ODBC Driver in System DSN. The Driver selected from the drop-downs are jdbc-odbc.
Kindly explain the mistake I m doing.

New voice file for E7 Text-to-Speech

Similar Messages

Maybe you are looking for