New vs old versions of apple loops

Hi,
I just received my upgrade from Logic Express 8 to Logic Studio Pro. Although I'm not a huge user of apple loops they do, from time to time come in handy. So I have to ask this question... Most of the apple loops on my current system are of the old type. These include the ones that came with garageband 7/Express 7 and Jam Packs 1 & 3. If I replace these with the new loops will Logic Pro 8 still play back the songs I've created using the old loops and substitute the new equivalents? Question 2. In a recent post on the Express 8 forum a user lamented the fact that the installation of Express 8 also overwrote his project files from Express 7. He lost them all. In my case this did not happen and, in any case, I have them backed up on an external hard drive. Is the installation of Pro 8 is likely to overwrite the project files of Express 8? If so I need to give myself the time to get them back. Last question. I'd like to give myself enough time to do the installation all in one go. I will not be installing Mainstage, Soundtrack Pro 2 or the surround sound specific material at this time. How long is this installation going to take?
Thanks,
Rainguitar

Acutally these are two separate features of the new model. Dual band keeps the connection from slowing down if someone connects using a computer that only supports the slower connection. Older routers default to the slower connection speeds if there are any G clients.
Guest networking works on both connections. Your guests could be using the same radio to connect as you, but it will appear that they are on a different network. They will also not be able to see any of the computers on your network and also not any of the computers on the "guest" network, unless you have enabled this on the Time Capsule.
If you have any devices that use 802.11G and newer devices that use 802.11n then it is definitely worth the $150. Sharing your internet with friends without compromising security is nice too.
I did notice that connections seem stronger than the Airport Extreme that I replace that shipped the same time as the old Time Capsule.

Similar Messages

  • My friend just made a home video movie on his newest apple TV, however, I can´t watch it on my old version of apple tv. Would both apple´s TV format are compatibles?

    My friend just made a home video movie on his newest apple TV, however, I can´t watch it on my old version of apple tv, when I try to sync it says not possible to run on this format. Would both apple´s TV formats be compatibles?

    How do you make a video on the Apple TV 2?

  • I cannot remove old version of apple software update msi. says it's on a network that's unavailable. any ideas i cat properly install itunes.

    i cannot remove old version of apple software update msi. says it's on a network that's unavailable. any ideas i cat properly install itunes.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • TS1424 cant download old version of apple windows wont allow it so i cant get old account for i tunes so i have no music

    listen i have a i pod touch with apple i tunes have new pc and downloaded i tunes 10.6 none of my music is in this version but my pc says that the old version isn't capable with the windows version installes on my pc so now i have no music what do i do how do i get the old version so that i have all music and i cant sync i pod with pc cuse i no longer have i pod what do i do?

    but my pc says that the old version isn't capable with the windows version installes on my pc
    What's the precise text of that message, please? (There's a few different ones I can think of that mention Windows Installer, but I can't place your one at the moment.)

  • Old version of Apple Software Update

    Hi everyone,
    I am trying to upgrade to Itunes 8. But when It trys to install the new version a window pops up and says " The older version of apple software updater can not be removed. Contact the Tech support". I tried to unistall from vista but says it can't remove it.
    So if anyone knows how to update to It 8 and remove my old ver. of software update I would surely appreciate it.
    Thanks

    Hi
    I have done that, even gone to extreme to unistalling Itunes all together but the old update software is hidden in my computer and new Itunes can't get rid of it so wont install. Went to my explorer and deleted anything that had apple on it but still no joy. So now I am sans Itunes.
    Thanks anyway
    Eirin

  • Apple Care new or old Versions

    Hi im trying to buy an apple care for my mac book pro 13" which is from last year and the one year warranty is almost out but theres a newer version and an old which one should i buy?
    Thanks

    thx for the help i just bought the apple care i'll write back when i get it

  • Invalid license after moving software to a new computer; old version disengaged

    I bought a new MacBook Pro. I copied PhotoShop Elements 10, along with other software, from my old Mac and added it to the new one. I got a request on the new Mac to enter the license. I did that and receive notice that the license was invalid. Some investigation revealed that I did not have permission to use the software on two computers. I disengaged the software on the old Mac. I'm still getting a request for the license, but every time I enter it, I get the same invalid license error message. I have emptied the cache and dumped cookies on my browser. What else can I do?
    Any help much appreciate; thanks!

    Your license does allow the use of the software on two computers. The problem is that you can never, never move an installed version of PSE. PSE is not a tidy package like most mac apps; its installer strews stuff all over your hard drive and you can never hope to get all the necessary bits and bobs. You must ALWAYS install PSE from scratch on a new machine.
    By attempting to move it, you have made a lot more problems for yourself. Now you will need to download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    After which you can go around and manually remove all the PSE bits you've brought over. Look not only in Applications, but also in hard drive>library>Application Support>Adobe and also in your username>library>preferences. (You can't use spotlight to search. It's programmed to skip these kinds of files.)
    After that you can reinstall from scratch.

  • New computer - old versions of Illustrator

    I have a new computer and V 8.0 and 10.0 upgrade in Illustrator.  I've installed them but when I start it from the start menu (Windows 7 from XP), it starts to start with the box and loading files and then it stops.  Nothing.  It's in my program list but it's like it stalls and dissappears.
    Any ideas?  Thank you

    AI 10 should run in XP compatibility mode...
    Mylenium

  • Can't install new version of iTunes or uninstall all of old version

    i posted this yesterday and saw it posted later but now my post is gone so here we go again.
    i can down load the application but wheni run the installer it quits and throughs up a message saying something like "can't delete old version of apple software update" !?!?
    i then deleted everything and uninstalled everything apple/itunes(so i thought).
    i still get the same message, "can't delete old version". i don't know why it won;t jsut install over the old version but it won't.
    HOW can i get rid of the old version? i deleted everything and there is nothing left to uninstall?!?! Are there hidden files somewhere?
    HOW can i get the new iTunes installed so i can use my new itouch? HELP!!!

    i posted this yesterday and saw it posted later but now my post is gone so here we go again.
    Your first post is still there, wheeler. Click on the following link to see your previous post and my reply:
    http://discussions.apple.com/message.jspa?messageID=10701711#10701711

  • Apple Loops Custom brower (adding samples)

    Does anyone know if it's possible to custom change the category of music you put your loops into? For example I create 3 samples and would like to add them to apple loops utility so during production I can test them out over other parts in a song to see if they go. But the question is how exactly do you get your custom loops in a custom created folder you made within apple loops. What is the fastest method for this.
    sorry for the repeated post just wanted to start fresh over and make sure I had the correct question across.

    What works for me:
    Create a new folder in ~/Library/Audio/Apple Loops/User Loops with any name you want. Drop your new loops into that folder, and drop that new folder on to the Loop browser window for indexing. You may (or may not) have to restart Logic - I don't remember…

  • Crash during upload new or old firmware into AP1200

    After downloading new firmware from cisco.com
    i try to load him into AP1200,
    but process was interupted at boot phase with new firmware.
    Bootloader print this:
    Initialization: Unexpected Boot Error
    And now i can`t run ANY new or old firmware.
    Only load into AP, not run.
    I try some new and old version firmware with same result!
    My device is AIR-AP1220B-E-K9

    Yes. VxWorks version 12.00T
    I tried to upgrade firmware from VxWorks 12.00T to IOS version
    with downloaded image: AP1200-Cisco-IOS-Upgrade-Image-v1.img
    After executing steps, such as written in manual for this image,
    my AP goes down, and now a i can get access to AP with CONSOLE
    CABLE only.
    Now only bootstrap work, and i tried to run some old images,
    but bootstrap can't run it!
    Look at message:
    System ID: 000C30DA9FDA
    Motherboard: IBM405 200MHz, 8192KB FLASH, 16384KB DRAM, Revision 04
    Bootstrap Ver. 1.00: FLASH, CRC 1C914641 (OK)
    Initialization: Unexpected Boot Error

  • Removed old version, but it keeps updating?

    About two months ago, I installed the new Garage Band 10.  Everything is fine with that version.  It installed in parallel with the old version, GB 6, and I was able to compare them.  Both the new and old version had been purchased through the App Store on my Macbook Air.
    After about a month, I decided to download the extra content for GB 10.  So in order to have ample room for all of that, I deleted the old version (GB 6) and its content.  I followed some instructions in a forum for deleting GB 6..  So that seemed to go well also.  I've been running in GB 10, all the new content works fine.
    But today I happened to look at the list of my Software Updates, which are set to auto for app store applications.  Ever since I removed GB 6, Software Update has apparently been trying to install an update for the GB 6 content.  It's done so every single night since I removed GB 6.
    So I'm guessing that there's something I needed to remove for GB 6, and I failed to remove it, so Software Update keeps trying to install the program again?  Hmmm.  Any thoughts?

    hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
    [[Fix problems connecting to websites after updating Firefox]]

  • On my new Imac, I had the trial version of Pages, and saved some files in it. Now I have purchased the full version from Apple via a download, but I cannot save or print the old files, please help!

    On my new Imac I saved some files on the free trial version of Pages, since downloading the full version from Apple, have been unable to save or print from old files saved when using the trial version. Any ideas? Thank you!

    My guess is the 30-day trial period has expired but you didn't remove the trial before installing the full version. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
    Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

  • I have an old Mac laptop that Apple no longer supports -- so, I can't download the latest version of iTunes. Also, I got a new iPhone that won't communicate with my old version of iTunes. How do I transfer my music from my laptop to my new phone?

    Old version of iTunes on laptop won't transfer music to my new iPhone.

    Your profile shows you are running Lion (10.7.5). If this is the case, you certainly can sync with a new iPhone. If you are not running Lion, you will need to upgrade to at least Snow Leopard (10.6.8). See below to purchase.
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! They said it should be pulsating but it's not

    Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! I already read some reviews and discussion about this. They said that the lightning bolt should pulsate when charging but it's not!

    Thanks for the replies. It took a while not hearing anything so thought I was alone. I have done many of the suggestions already. The key here is that it occurs on both phones with apps, and phones still packaged in a box.
    A Genius Bar supervisor also checked his Verizon data usage log and found the same 6 hour incremental use. Suprisingly, he did not express much intrigue over that. Maybe he did, but did not show it.
    I think the 6 hour incremental usage is the main issue here. I spoke with Verizon (again) and they confirmed that all they do is log exactly when the phone connected to the tower and used data. The time it records is when the usage started. I also found out that the time recorded is GMT.
    What is using data, unsolicited, every 6 hours?
    Why does it change?
    Why does it only happen on the iPhone 5 series and not the 4?
    Since no one from Apple seems to be chiming in on this, and I have not received the promised calls from Apple tech support that the Genius Bar staff said I was suppose to receive, it is starting to feel like something is being swept under the rug.
    I woke up the other day with another thought ... What application would use such large amounts of data? Well ... music, video, sound and pictures of course. Well ... what would someone set automatically that is of any use to them? hmmm ... video, pictures, sound. Is the iPhone 5 succeptible to snooping? Can an app be buried in the IOS that automatically turns on video and sound recording, and send it somewhere ... every 6 hours? Chilling. I noted that the smallest data usage is during the night when nothing is going on, then it peaks during the day. The Genius Bar tech and I looked at each other when I drew this sine wave graph on the log print outs during an appointment ...

Maybe you are looking for

  • Downloading Updates from a Window Machine

    Apple is quite helpful in checking the machine from which you are attempting a download, however, for those of us on dialup at home, we come to work where a fast connection exists, usually through a windows machine. Attempting to download and save an

  • How to link ap down payment invoice to ap invoice which have added.

    Hi,Expert,   I encounter this situation in detail as follow: 1. raisethe PO add row line with respective itemcode and quatity. 2. raisethe ap down payment invoice  copy from the po created  just now. 3. raise the bank -> outgoing pay the cash base on

  • Change Movement type 161 to Z61 for Returns Purchase Order

    Hi All, I have a requirement wherein the GOODS ISSUE against the Purchase Order with the returns flag (returns Purchase Order) should call out or post with a different movement type (ex. Z61) instead of the standard 161. Further, it should also updat

  • Quicktime Unavailable in FireFox ?

    I am running Windows XP Prof... and FireFox 1.5.0.7. Whenever I go to a site that requires quicktime I get the following error: QuickTime Unavailable The QuickTime Plug-In requires the QuickTime System extension version 5 or later. QuickTime is avail

  • Temperature measurement usb 6008 with Thermocouple

    Hi, I am trying to measure temperature with type k thermocouple on USB 6008. I set max for measuring voltage, and got 0 voltage with noise. It would be appreciated if you can help me to wire up properly. Cheers,