New W520 BIOS 1.37 has been posted:

New W520 BIOS 1.37 has been posted:
http://download.lenovo.com/ibmdl/pub...s/8buj15us.exe
http://download.lenovo.com/ibmdl/pub...s/8buj15us.txt
[Problem fixes]
- Fixed an issue where incorrect battery capacity might be shown in some battery
benchmark programs.
- Fixed an issue where the computer failed to resume normal operation from
hibernation state after running Setup Defaults by the F9 key in the ThinkPad
Setup menu.
- Fixed an issue where the Power-On NumLock function in ThinkPad Setup did not
work.
Although there is no mention of it above, BIOS 1.37 fixed the "50 second cold-boot start-up delay" issue with my Intel 510 SSD.
Hurrah!!!! and thank you Lenovo! (especially "someotherguy")
PS: However, my Kingston HyperX 1600 Mhz RAM now runs at 1333 Mhz (664.6Mhz x 2 - per HWiNFO64)
W520 4270CTO i7-2820QM Quadro2000M 1920x1080 Display 16GB RAM 2x240GB Intel 510 SSDs (RAID 0) - BIOS 1.42 - PCMark7:4,568
Samsung Series 9 15-inch NP900X4C-A03US - PCMark7: 4674
Solved!
Go to Solution.

Perhaps the memory clock limit was to address a possible cause of the SSS issue. I've been running 1.37 with Crucial 4x8 gb SODIMMs w/o any issue. They are capable of running at 761MHz but are being clocked at 664.6 Mhz. Not a big deal for me.
huberth wrote:
New W520 BIOS 1.37 has been posted:
http://download.lenovo.com/ibmdl/pub...s/8buj15us.exe
http://download.lenovo.com/ibmdl/pub...s/8buj15us.txt
[Problem fixes]
- Fixed an issue where incorrect battery capacity might be shown in some battery
benchmark programs.
- Fixed an issue where the computer failed to resume normal operation from
hibernation state after running Setup Defaults by the F9 key in the ThinkPad
Setup menu.
- Fixed an issue where the Power-On NumLock function in ThinkPad Setup did not
work.
Although there is no mention of it above, BIOS 1.37 fixed the "50 second cold-boot start-up delay" issue with my Intel 510 SSD.
Hurrah!!!! and thank you Lenovo! (especially "someotherguy")
PS: However, my Kingston HyperX 1600 Mhz RAM now runs at 1333 Mhz (664.6Mhz x 2 - per HWiNFO64)
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

Similar Messages

Render Error: -50 I know this has been posted about a lot

Hey folks! I understand that this question has been posted many times to the community, and while it is not my intent to waste anyones time (Tom Wolsky), I have not found a solution that works. Can anyone help me? I will monitor this feed to respond back as soon as possible if you have any questions.
Here is my system:
OS 10.9.4
Late 2013 iMac 3.1 GHz I7
16gb ram
317 GB free space on 1TB hard drive
Final Cut version 10.1.2
Compressor Version 4.1.2
Here is what I have tried (all have failed with Render Error: -50)
Turn off Background Rendering, Delete Render Files, etc.
Copying media to new project, event, library, re-export
Tried Multiple Presets in both FCPX and Compressor
Turned off app nap on both FCPX and Compressor
I am at a loss here guys and gals. I have seen some posts explaining that it may be a corrupt clip that needs to be removed. Is exporting individual clips to find the culprit my best option?
Thanks in advance,
Cory

CoryOhio wrote:
... that it may be a corrupt clip that needs to be removed. Is exporting individual clips to find the culprit my best option?
Any manual-converted .mts clips involved in your Project?
You could use FCPX' feature to export just parts/ranges of a Project to narrow down the culprit (export a half, ok? export a half of the oither half, ok? export...)

Configurable system message No Goods Receipt/Delivery has been posted

When user add a new AR Invoice or AP Invoice without creating prior to it
Goods Receipt or Delivery document system always displays message: 'No
Goods Receipt/Delivery has been posted. Continue?'. This message should
be configurable as for users which don't use Delivery or Goods Receipt PO is useless. User should decide if he or she wants to display it or not. For most customers clicking on this message is a huge wasting of time as it displays at every sales or purchase operation.

Hi
If you use Shipping notification then you have to create inbound delivery VL31n and do the PGR in inbound delivery VL32N itself.
Incase of scheduling agreement schedule lines you have to make sure the following
1) Schedule line delivery date shoud be todays date or in the past
2) Schedule must be released by using message type based on the type of schedule ( Normal, JIT or forecast)
Hope it helps
Thanks/Karthik

How to know if transactions in AP has been posted to GL

This may be a stupid question but this is the issue.
The client said they had posted entries from AP to GL for a particular account.
1.How to verify that the transactions related to that particular account has been duly transferred to GL?
Can I use the account inquiry in GL to see if the transactions have been posted or not? or any other tools?
Will the AP trial balance report give me all the transactions with has been posted?
2.If the client has created accounting but the transaction is not transferred to GL. How to resolve this issue?
Thanks for the kind reply

Hi,
For posting confirmation... view accounting of that invoice... click on "View Journal Entry" button... than expand any entry item by clicking Plus sign... than copy Journal entry name.... and goto General entry superuser-->Journal--> Entry--> find that Copied journal .. the POSTING status will be shown.
Regards:
Shahzad M. Saleem(Mark it as helpful if it does)

My iphone 5 is no longer charging with new apple cord and lint has been cleared. Please help.

My iphone 5 is no longer charging with a new apple cord and lint has been cleared. Please help. It just started happening this week and I have tried everything. Is this a software / driver problem? We all know the battery doesn't last a full day if you "use" your phone like a normal person. I am very frustrated! My daughters iphone 5 started doing this a few days later than mine as well.

Not much help I'm afraid but I use my iPhone 5 like a 'normal' person and it's battery almost all day. Perhaps there's a hardware fault somewhere? Have you tried the usual reset and restore?

I apologize if this is a repeat -- I can't find if my question has been posted, but all traffic received through SAFARI (but not FIREFOX) quoting prices has the latter in EUROS, not US Dollars. Figures in my outgoing Email appear to the recepient in Dolla

I apologize if this is a repeat, but I can't tell if my question has been posted.
For the past several weeks, all incoming traffic via Safari 5.0.5, but not Firefox,containing cost/price figures appear in Euros, not US Dollars. My responses, however, are received correctly in US Dollars. Wierd, and irritating. Any ideas?

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

I am trying to download the new OS Mavericks. It has been saying 'Waiting' for over an hour? How can I fix this?

I am trying to download the new OS Mavericks. It has been saying 'Waiting' for over an hour? How can I fix this?

with a little patience - people all over the world are downloading mavericks.
alternatively you could restart your computer and try again

My new macbook pro (lion) iCal has been showing the wrong date?

My new macbook pro (lion) iCal has been showing the wrong date for stored events - even though i have put the appointment in on the right date when I look it up a week or so later it has changed?
I think it might be showing 2011 date? How can i fix this and do I have back-up of my original dates?

Good to hear . Happy computing!

My new ipod touch say it has been disabled for 21,728,990 minutes. How do i fix that?

My new ipod touch say it has been disabled for 21,728,990 minutes.How do i fix that!

You need to place the iPod in recovery mode and then restore it via iTunes on yur computer. Restore from backup if you have a backup. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
For more information see:
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

Finding the last fiscal a GL has been posted to

Hi All,
Is there any way by which we can find out the last time a GL has been posted to (fiscal year). We have a list of GL accounts and need to find a faster way of doind this.
Regards,
Vijay

Hi,
I finally found a report which can be used to find the GL Accounts not posted. You can use the report S_ALR_87012311 - G/L Account Balances and Line Items to find out the GL Accounts not posted. Run the report by ticking the checkbox "Print Accounts not posted to".
This will give the list of the accounts not posted based on your data selection.
Hope this helps.
Regards
Mahendra

TS4268 I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activati

I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activation' I've done the the resets and followed the instructions from the Apple Help page but still can't get it to switch on??

If you say you have done everything in this article: http://support.apple.com/kb/ts4268, then you should probably contact your carrier for their advice.

HT5622 I made a new Apple ID and everything has been changed and then I am trying to update candy crush and it is asking me for an old apple ID and this hasn't happened before

I made a new Apple ID and everything has been changed and then I am trying to update candy crush and it is asking me for an old apple ID and this hasn't happened before

Games and media are forever tied to the AppleID used to download them.
Either log in under the old ID to update Candy Crush or delete the game and
then download it under the new ID. All in-app purchases and progress will be lost.
Why did you make a new AppleID, if I may ask?

I know this has been posted a few times but, High Pitch noises!!!!!!!!!

I keep getting wierd high pitch noises from the MOBO, I have tried to push in the MSI plate on the NB but it didn't stop the noise. But what I have found out stops it is kind of wierd.
If I go into any Windows Explorer window and right click on certain icons, (i.e. C: Hard Drive, the nVidia Ethernet Adapter, or my DVD-RW) the noise stops suddenly, but if I click off of the right click menu the noise starts back up again. I don't get it? Also if I use my mouse wheel and scrol up and down rapidly, the sound stops while I am scrolling, but once I stop it comes back.
I know that this has been posted a few times, but I still haven't found any way to stop the noise other than the ways above. So if anyone has/had the same problem and knows how to fix it, I would really appreciate it if you would share.
EDIT: I have also tried to return my CPU to stock speeds but there is still a noise.

Im sure this noise, is the copper coils around the components near the cpu socket.. its a known problem on MSI boards, where they start to resernate / vibrate.
I've seen two solutions, neither have i tried, as I don't have the problem, but they are pretty harmless.
one is to apply a small amount of superglue over the copper coils, allow to set and switch back on,, or a safer way (in my opinion) is to use some wax (or electical sealing wax).
see this post
High Pitch Sound Identified! Read more...

A newer version of this page has been detected, The new version will be loaded

Ok, So I uploaded the files with editable reigions and all worked great then the client made some minor changes.
Then the client wanted other changes that needed to be made to the file, So I download the latest file off the server, edited it then re uploaded it.
Then very page that I uploaded that I go to edit keeps getting this message "A newer version of this page has been detected, The new version will be loaded" - It then re-loads the page, but when I hit edit again, The same message appears . . . . '
To make it work. I have had to Duplicate the page, Rename it to index2.html then delete the original index.html and make the duplicate index.html and then it works fine . . . .
Any help would be appreciated
Thanks

Hi Thomas,
can you please give us the link to your site where we can reproduce the problem?
Also, it would be helpful for us (for debugging purpose) if you could send us your site FTP credentials to this email address:
[email protected]
Thanks,
Diana

Brand New Macbook Pro (Lion OS) has been repaired

My Brand New Macbook Pro with the LION OS in it has been repaired and is so far working without a hitch!

Good to hear . Happy computing!

New W520 BIOS 1.37 has been posted:

Similar Messages

Maybe you are looking for