New Wacom driver RELEASED for Windows 8

Get it guys, it is a huge improvement.It works better, it calibrates better, it has extra options ... Just choose tablet PC and Windows 8 as your OS,http://www.wacom.com/support/driversTABLET PC – Enhanced Tablet Driver 7.1.1-12 Have fun with it

manuelcalavera wrote:
gcoupe, install the driver again.
then recalibrate the touch via the Windows' Tablet PC Setting.
then above that panel, choose Configure and touch the screen.
then reset the touch calibration.
That's what I did.
It's what I'm pretty sure I did too - but it didn't seem to help. The Touch swipes wouldn't work. So I'm back to square one for the moment. I may try going through the whole procedure again in the future if the reports of the driver turn out to be generally positive.

Similar Messages

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Portal drive software for Windows 7 (64-bit)

Hi...Experts
We could not find the portal drive software for Windows 7 (64-bit) OS on service market place. The one which is available on market place is working fine for Windows 7 (32-bit ) but it does not work for 64-bit.
Can any one help us to get the 64-Bit Portal Drive
Rgds
PR

1- Set BasicAuthLevel's value to "2" by expand HKEY_LOCAL_MACHINE >> SYSTEM>>CurrentControlSet>>Services>>webClient>>Parameters
2- Restart your computer.
3- Right click "Computer" and click "Map network drive..."
To Letter Field: Set a free drive letter.
To Folder Field: Assume that your webDav address is http://abc.com:50000/irj/go/km/docs/ change it to
abc.com:50000irjgokmdocs
4- Enter your ID an Password
thats all...
Note: The mapping is as follows:
0 - Basic authentication disabled
1 - Basic authentication enabled for SSL shares only
2 or greater - Basic authentication enabled for SSL shares and for non-SSL shares

SCCM Driver Packs for Windows 8

We have several SCCM driver packs for Windows 8 available now...
ThinkPad L430, L530
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w864_201210.exe
ThinkPad T430(s,i), T530(i), W530
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w864_201210.exe
ThinkPad X1 Carbon
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w864_201210.exe
ThinkPad X131e
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w864_201210.exe

Adding X230
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w864_201210.exe

Model 15-d006TU all driver link for windows 7

plz plz plz
model 15-d006TU all driver link for windows 7

Hi:
I have already answered your question yesterday.
http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/32-bit-driver-for-windows-7/m-p/3481621
Your notebook is not supported by HP for windows 7 32 bit.
You have to use drivers from other notebooks and manufacturers websites.
If those drivers don't work, then you need to install W7 64 bit.
Asking the same question every day will get you absolutely nowhere.

New driver releases for E-MU PCI, PCMCIA and USB models (Jan 2008)

For XP/Vista
PCI & CardBus v2 - http://www.emu.com/support/welcome.asp?rd=download
0202 USB & 0404 USB v2 (preview, expires in May '08) - http://connect.creativelabs.com/emu/default.aspx
jutapa
Message Edited by jutapa on 01-18-200810:24 PM

maiki wrote:
I see very new driver and Patchmix releases for the 1616 and 1616M PCMCIA interfaces (1/16/08), I did not look at the pages for the PCI boards, but I sure don't see any new drivers, firmware, etc for USB, 0202 and 0404 USB.
For instance, here is the current page to download drivers, etc., for the 0404 USB:
http://www.emu.com/support/files/dow...cy=&Platform=1
The install package there is dated April 2007.
Why did you include USB models in your post about new driver releases? Are they somewhere else?
Hmm... maybe you didn't look close enogh behind the link given for drivers for USB models in my post ... though, those are not new final drivers but as the previous USB driver expired 17 or 18 January, E-MU refreshed them 18 January. Also, I have not informed anything 'bout new drivers for USB but only new driver releases as the subject says.
jutapa

New Mac Wacom driver released

http://www.wacom.com/productsupport/select.cfm

Not sure, Mark. I've simply noticed it on my machines, which are all Intel based. I was curious.
As I posted, I've been a tablet user for a very long time and it was only under 10.5.4 and 10.5.4 with WACOM driver 6.0.8-2 that the double-click was a problem, and primarily in the Finder. The new driver seems to have cured the issue.

I have a an external hard drive formatted for Windows, and I want to move those files to a new hard drive formatted for both Windows and OS. Is this possible?

I just purchased a MB Air 13", as well as a Seagate Slim Backup Plus. I have an older external hard drive that I was using with a Dell laptop. I would like to get the files off of the older external hard drive, and onto the new Seagate drive. Is this possible? I'd also like to be able to add files going forward to the Seagate from either a PC or a Mac and be able to view/use them on the MB Air 13".
Thanks in advance.

You will have to format the Seagate external HDD to a format common to both Mac and PC such as ExFAT. That should allow you to transfer files from the old HDD and still allow you to use with your MBA.
Ciao.

PnP Driver, NVIDIA, for Windows 8

In need of some serious assistance. I did a clean install of Windows 8 Professional on an HP Compaq Presario CQ60-215DX. Everything went smoothly except there was one driver that didn't download with it labeled "Coprocessor". Despite the
driver being missing the device runs it superbly HOWEVER I keep getting 2 Important updates; Update for Windows 8 (KB2770917) and Update for Windows 8 (KB2779768). They download with no problem but after the installation process things
turn red and say their are Errors found, code 800073718, as well as giving a link to "Get help with this error"
When I click this link it takes me to the link "Troubleshoot problems with installing updates," and from there "Tap or click to open the Windows Update troubleshooter." After running this it gives two possible errors and states them fixed. I go back
to install updates and hit try again and it says I no longer need the updates but when I check for new updates there are the same two all over again.
If I try to update the driver from the device properties it says it can not find one. The Action Center, however, says it has a solution to my problem and links me to NVIDIA's web site after telling me the problem is:
Description
Windows detected a new device attached to your computer, but could not find the driver software it needs to make the device usable. Each device manufacturer typically includes driver software of a CD that comes with the device, or as a download from its website.
The hardware ID of your device is PCI\VEN_10DE&DEV_0753&SUBSYS_360A103C&REV_A2.
Problem signature
Problem Event Name: PnPDriverNotFound
Architecture: x86
Hardware Id: PCI\VEN_10DE&DEV_0753&SUBSYS_360A103C&REV_A2
OS Version: 6.2.9200.2.0.0.256.48
Locale ID: 1033
Extra information about the problem
Bucket ID: 9703ab1535101f90f74cebd9d44e234e (1705665006)
So I, of course, go there in attempt to get the driver I need for the chipset. I download to install what I discover is for Windows 7, 15.56-nforce-winvista-win7-32bit-international-whql.exe. Of course
this is not compatible.
That is why I am now here. Can anyone help me figure this out please.

To fix the Windows Update issue, I suggest you try the 'Fix it' first.
http://support.microsoft.com/mats/windows_update/en
I noticed that HP does not release Windows 8 compatible drivers for your computer. I suspect that the computer is not compatible with Windows 8. I suggest you contact HP support for more information.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

New GMA500 driver: 4.3 Windows Experience Index!

Intel has a new GMA 500 driver with MUCH improved Aero performance out. The old Windows Experience Aero Index with driver build #2013 was 2.5. With the new build #2019 it's 4.3!
You can download the new driver at the fit-PC site http://www.fit-pc2.com/download/win7-drivers/

True, there is not much of a difference. There are also still some flickering elements (e.g. the + in Google Chromes tab bar). On the other hand, Aero with transparency off isn't any slower than Basic (only slightly more sluggish when fast scrolling in a browser). The Aero display quality is better: When you quickly move windows, they leave trails under Basic. Not so under Aero. In Excel I sometimes get black "artifacts" under Basic. With Aero it is all good in Excel.
The boot process with Aero is different to Basic. When the desktop appears, all tray items and services are already loaded. With Basic it is like in old Windows versions where the load process still continues when the desktop is displayed.
Intel obviously still has some work to do on the driver. For the time being I leave Aero on. It also looks much better with the UI animations and Aero Peek is handy.
This #2019 driver is the maintenance release 2 for the one on Windows Update. Nokia should refresh the driver on their support site. Most of the others there are also out of date.
My WEI ratings are 2.3 (processor), 4.3 (RAM), 4.3 (Aero), 2.3 (Games), 4.4 (HD)

How can I transfer files off an external hard drive formatted for windows?

I just bought my first mac (yay!) and am trying to transfer my files off of my old pc. The problem is that I stored all my personal files on an external hard drive, which is of course formatted for windows. My mac will open it, but it is "read only." I tried plugging it back into my pc and using the Migration Assistant to transfer my files over, but it was not detected (rest of the pc was).
However, the second time I tried plugging it in to my pc, it told me it would need to be formatted first. Obviously my mac has changed something on it, and now all my personal files are on a hard drive that is unusable by either my old pc or my new mac!
Any suggestions would be appreciated! Heads up though, I am not especially computer literate, and my pc needs to stay intact as the husband needs it and some of the programs on it for school. Also, I have a second external hard drive that is brand new with nothing on it, if that will come in handy.
Thanks!

Format the extra HDD to EXFAT as previously indicated. There are two ways that can use to transferr the data.
1. Connect both drives to the PC and the copy the files to the newly formatted (EXFAT) drive from the HDD with the data . Then connect the EXFAT drive to the MBP and transfer the data to same.
2. Connect both drives to the MBP and open DISK UTILITY>RESTORE. Drag the drive with the data on it to the 'Source' field. Drag the EXFAT drive to the 'Destination' field. Click on the 'Restore' butt is on. After the transfer has been completed, close DISK UTILITY and place the data on the MBP where you want it.
Ciao.

Hp 6310y can't get new hard drive to load windows 7

model 6310y -- Windows 7 home premium 64 bit
My desktop PC stopped working. I took it to local computer store and they said it was HD. I bought new hard drive and tried to install retail Windows 7 home premium 64 bit OS. I got an error message Code 0x80070002.
I called HP support....they told me I needed their brand of recovery discs because the motherboard or BIOS wouldn't allow me to install Windows 7 on the new replacement HD w/o it being their (HP) discs. So I ordered them...$17
I bought another new HD and tried to install Windows 7 OS with the HP recovery discs. This time got Error Code 0xe0ef000e.
I should mention both times trying to install OS on new replacement HD...it got approx 8 to 12 minutes into installation before getting error messages.
I called HP support....this time was told that the retail version of Windows 7 OS should have worked and that I didn't need the HP brand recovery discs when installing new replacement HD. They offered me to pay $199 and send them my desktop to fix it....all inclusive fix.
Very confused. I have never encountered anything like this before...I've had mulitple hard drives die over the years and have replaced them myself and installed all the software including OS myself w/o any problems like this.
Memory checked out ok when utilizing the diagnostics f9 key .... it did show problems with HD during one of my many diagnostic attempts
Not sure if its a bad motherboard or built in video card ..... not sure how to find out either....since I can't get the PC up and running
It will boot to blue HP screen & most of time won't allow me to get into f10, f9 or esc screens.
Not sure if its worth paying $200 to fix this or go and buy a new one for around the same price.
any suggestions or help is appreciated
thanks
This question was solved.
View Solution.

1) A retail OS should have worked. That particular motherboard's NVidia Sata controller chip had a bad batch. You need to make sure the hard drive is recognized in the BIOS. If not, nothing can be done.
2) Their brand of recovery disks was wrong, and was acknowledged. What about your $17 ??
If you had either a retail OS, or the recovery Disks that you made, these are acceptable.
The HP version when used with a new hard drive require conditioning "CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive".
Here's the list:
FAILED series computer with M2N78LA boards
That series motherboard was installed in many different models of HP computers. It is fraught with problems.
http://h30434.www3.hp.com/t5/Desktop-Hardware/m8530f-desktop-PC-with-a-m2n78-la-mother-board-doesn-....
Here are the reported models with M2N78LA boards that have failed. This is not the complete list.
a4316f
e9140f
p5210y
p6130y
p6142p
p6157c
p6210f (Voilet)
p6210y
p6214c
p6310y
p6320y
a6720y
m8530f
m9120y
m9350f
m9517c
m9530f
m9840sc
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Tutorial: Clone/Installing new hard drive (hdd) & install windows(FAT NTFS)

This is a tutorial for people looking to clone their internal hard drive and install it into their macbook (usually because you've upgraded to a larger hdd). I have also included an installation of windows vis a vis boot camp style. Ive been battling this for the past 3 days, so hopefully this tutorial will answer some questions and save you some time.
1. Firstly get your external drive (clone) ready. Go to applications---->utilities---->disk utility. Click on your external drive and then partition it. I used 2 partitions, one for mac (200 GB) and one for windows (40 GB). For now partition in GUID partition format (found in options). This is important. You can check whether it actually as in GUID at the end of the format when you click on the drive and on the bottom part of the screen it will give you all the drive information. (NOTE: if you have a standard windows installation you can have 1 partition at this stage and then later let boot camp create a partition for you. Boot camp will only format in FAT, so all windows using NTFS are out of luck).
2. if you ve decided to go for 2 partitions, format the windows partition into FAT or NTFS. If you are using windows 7 (which by the way, is a pretty good effort by microsoft and WAS free to download on beta), anyways if your using a windows which requires NTFS obviously format so. WINXP runs just fine on FAT and is probably the easier option. (This is a note for those formatting on NTFS; sometimes OSX with have some error in formatting NTFS at this stage, God knows why, dont download NTFS 3G or Disk Warrior, nothing will fix it. Just leave it for now and when your finished cloning and ready to install windows, use the XP CD to boot from and then you will be presented with the option of formatting in NTFS. I did this then exited before the actual XP install to get my windows 7 in there. (NOTE: you cannot clone windows installations, ntfs partitions, etc)
3. With your external drive ready. Download carbon copy cloner or super duper. I used super duper. So just choose your internal drive and 'backup all files' to your external. This disk will be bootable. It will not be necessary to use a third hdd to restore to. infact i tried both ways of doing it and both worked just as well as each other. No need for a third drive as some have suggested.
4. Once finished, check out the clone. Restart, just when the mac is starting HOLD down the 'option' key....you will be presented with a list of devices to boot from, choose your external (usb or firewire------> note usb only works for INTEL macs, if your not sure if you have an intel mac. In OSX click on the small black apple on the upper left hand corner of the screen and 'about this mac'....it should say whether its intel or not. Also if your pressing option and you get a padlock wanting a password (like i did), but you dont know the password. Dont worry. Get your OSX installation discs, reboot from those (it will do so automatically). Go to Utilities drop down menu and choose reset firmware password. The other 'reset password' resets the password which would come right before entering into OSX at startup.
5. Anyways, assuming your all good booting from your external drive, check out drive, whether everything is where it should be. if it check outs your good to go.
6. Disassemble macbook to install your clone (not that difficult, get a good youtube tutorial for this like http://www.youtube.com/watch?v=MXqJn465lxs and be careful with disengaging your keyboard cable, otherwise its fairly straight forward. I did this about 6 times trying to get everything right and experimenting with installations. So im pretty blase about it
7. Start up your machine hold OPTION at startup, choose your now internal hdd. Your in. (NOTE: if you reset your firmware password the first time, you will have to do this again with your OSX discs)
8. If you have a standard windows installation you can download boot camp assistant or alternatively it will already be in applications---->utilities---> boot camp assistant. Boot camp will create you a partition and then ask you to put in the windows installation disc, is fairly automated.
9. If you decide to do it manually because you have 2 partitions already. Just restart with your windows cd in there and wait for it to boot, if it doesnt, restart, hold option key. Then just go through the usual windows installation, choose the partition with FAT or NTFS.
10. After all this you will have a working copy of OSX and Windows. I use VMWARE to use windows inside OSX, like a virtual drive. VMWARE has a more straight forward installation then Parallels Desktop (which is apparently faster).... but choose whatever works for you. To look at OSX files through Windows install MACDRIVE and you will be able to view and alter all files as you see fit.
Hopefully this tutorial was of some help. I don t generally read any mac forums so i cant really reply to any questions. I just wanted to post my experience so if someone else out there is searching for answers like i was, then these words will be guide and save you time trawling through numberless webpages......Good luck.

I would approach the situation as follows;
install Acronis, if your new HDD is from Seagate or Western Digital I believe you can download this free from their support sites.
create an Acronis Rescue Disc and when it's created uninstall Acronis as you don't need it any more.
attach external HDD and ODD and boot from the Acronis Rescue Disc
create an image of the current main HDD to the external HDD
remove current HDD from your X61 and insert the new HDD in it's place - this is very important.
boot from Acronis Rescue Disc and recover the image you created to it.
Enjoy your new hard drive.
Alternatively, if you can put your original HDD in the external HDD caddy (connectors are the same) or purchase a 2.5" caddy, you could clone after creating the Acronis Rescue Disc, step by step instructions for cloning can be found here.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Where to download previous driver releases for W500 (need AuthenTec fingerprint version 3.2.0.341)

Hi Everyone,
after investigating an issue for hours it turned out, that i need an older version of the lenovo fingerprint package for W500 (AuthenTec AES2810) fingerprint reader.
Where can i download this driver:
Driver: Fingerprint Reader for W500 Model 4061W7P (AuthenTec AES2810)
OS: Windows 7, 64-bit
Language: EN
Driver Version: 3.2.0.341 (which is the only version supported by Sophos SafeGuard Easy 5.50.8 full disk encryption and Power On Authentication using fingerprint).
I could not find any download location for older driver versions.
Any help is highly appreciated.
Thank you guys!
Regards
Andrea

Hi Peter,
your suggestion is not an option for this issue, since i'm under time pressure and i know this will turn out to be a "who is responsible for the fix" problem.Lenovo or Sophos... Besinde this there's no rollback option, since i installed the system this week with the most recent drivers and fingerprint software.
Maybe i was not precise enough, its the AuthenTec Software Version 3.2.0.341 which i exctly need to get things working (this also includes the device driver but also other things which are recommended to enable biometric authentication). ThinkVantage System Update utility automatically selects the most recent software, which (in this case) will break biometric authentication.
Can anyone point me to a download URL where to get older Software releases. I was unable to find older releases for the fingerprint software.
Thanks and regards
Andrea

New Wacom driver RELEASED for Windows 8

Similar Messages

Maybe you are looking for