New WD Caviar Hard Drive not showing up and S.M.A.R.T. is "not supported"

Hi, hoping someone can help me out with this fairly quickly.
I am using a Mac G5, here's the specs:
Machine Name: Power Mac G5
Machine Model: PowerMac7,2
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 1
CPU Speed: 1.8 GHz
L2 Cache (per CPU): 512 KB
Memory: 2.5 GB
Bus Speed: 900 MHz
Boot ROM Version: 5.1.5f2
I bought this computer second hand. It has a 'Macintosh HD' drive and a 'Movie Drive'. The 'Movie Drive' keeps disappearing (with 70 Gigs on it) and the other 'HD' drive only has 7 Gigs left on it (from 150Gigs).
I just bought a new hard drive based on advice from this forum. I bought a WD Caviar SE16 500GB SATA2 16MB. I was told it would be compatible with this computer. This is the website and drive that I bought:
http://www.komplett.ie/k/ki.aspx?sku=331024
I took out the old Movie Drive that kept on disappearing on me (and which I had nothing on anyway) and replaced that with the new 500GB hard drive (in bay 'B'). With the intention of making this my main drive that everything would run on.
I started the computer and it didn't show up on the desktop.
I shut the computer down and inserted Disk Warrior 3. Held down 'C' on the keyboard as the computer started up. When Disk Warrior came up, I didn't have the option of rebuilding anything except the drive I had previously called 'Macintosh HD' (in bay 'A' inside the G5).
So I turned the computer off and started it again. I went into 'About this Mac', 'More info', and clicked on Serial-ATA. The TWO drives are there.
The old drive I already had in the G5 - 'Macintosh HD' - is saying:
ST3160023AS:
Capacity: 149.05 GB
Model: ST3160023AS
Revision: 3.05
Serial Number:
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: Yes
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 149.05 GB
Available: 7.4 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s9
Mount Point: /
The new drive is reading:
WDC WD5000AAKS-00A7B0:
Capacity: 465.76 GB
Model: WDC WD5000AAKS-00A7B0
Revision: 01.03B01
Serial Number:
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Not Supported
I don't know what SMART status is, but I could see that one is verified and the other is unsupported. How do I make sure the new drive is supported?
Thanks anyone!

Hi! The problem is that the drive cannot show up on the desktop until it is formatted. Read THIS on formatting. Once formatted the S.M.A.R.T. status will probably work. Tom

Similar Messages

Hard Drive not supported?

Im using an ibook g3 os x 10.4.11 700mhz ppc 640mb ram
When i connect my hard drive i get an error message that says it isnt supported. formatting this hard drive is out of the question. it has 2 years of photographic work on it, so no partitioning, erasing, or formatting. It has worked on the mac previously, and all of a sudden it doesnt? The HD was originally formatted for my imac on the leopard platform (os x journaled) and has worked on any computer i've ever plugged it into. this ibook has been a horrible disappointment thus far.
what can i do to make some, if any use of this thing. i need my hard drive to connect, otherwise i just have an overly expensive internet browser i guess.

Hi joshphoto, and a warm welcome to the forums!
It has worked on the mac previously, and all of a sudden it doesnt?
Are you saying it worked on THIS Mac, or another Mac? Was it Partitioned GUID on an IntelMac perhaps?
Do you have another Mac, one with Leopard on it to check out the HD with Disk Utility?

External Hard Drive/Not Showing Up on Desktop

I have a G4, running OS X 10.2.8 and recently my kids deleted some important data. So--we bought an external hard drive (WD MyBook 160 GB Essential Edition, which says on the box that it runs 10.2.8 and higher).
We took the external hard drive and the computer to a reputable repair place, the guy there took the hard drive out and using a G6 system, restored what he could to the external hard drive.
We bring it home, plug it in, and the computer is not reading the new external hard drive. I did check in disk utility, and it shows up as a greyed out item on the disk utility.
The external hard drive does show up when hooked up to my husband's office PC.
Any ideas as to why this is happening and how to correct it?
Thanks, Ruth

OK, I figured it out (in case anyone else needs to know) with this information from the Western Digital site:
Macintosh Operating System 10.3.x or earlier will only recognize FAT32 partitions that are smaller than 128-gigabytes. Multiple FAT32 partitions smaller than 128-gigabytes will need to be created in order for Macintosh Operating System 10.3.x or earlier to recognize the partitions. You will need to use a Windows based computer to create FAT32 partitions, as Macintosh does not have the ability to create them.
Macintosh Operating System 10.4.x or later can recognize FAT32 partitions over 128-gigabytes.

My external hard drive not showing up

Hello,
My external hard drive is not showing up on my desktop. I went to finder & preferences>general and made sure I checked "show these items" and checked hard drives. I even unchecked it because I have 2 other external hard drives. When I checked the hard drive box the other 2 hard drives appeared but the third hard drive did not. The hard drive not showing up on my desk top does show up when I double click my system hard drive & can be opened from there, but I want to see it on my desk top. Any help would be appreciated.
Thanks

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen /V* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

Mac OS X (10.4) Clone To New Hard Drive - Not Booting

Hello folks,
I have recently bought an iMac G3 Snow, w/ 500MHz processor. This things works well with Tiger installed, but has quite a noisy hard drive. I wish to replace the hard drive with a newer, faster, and quieter 30GB hard drive that I happen to have spare.
I had booted the iMac in "Target Disk Mode", fired up my Macbook Pro, and connected the two computers via Firewire. I had then made a successful image of the iMac's HDD using Disk Utility. I then removed and replaced the hard drive in the iMac, and proceeded to restore the image to the new hard drive using Disk Utility again, also via Target Disk Mode.
Upon successfully restoring the image, I rebooted the iMac, only to find that the iMac cannot find the appropriate boot files. (ie, Question-mark w/ Finder folder logo error).
Any help to fix this would be muchly appreciated.
Many thanks,
Andrew

Hi Jeff - many thanks for your help. Unfortunately, I am still unable to boot from a clone made with SuperDuper or Carbon Copy Cloner.
I'm starting to focus my troubleshooting toward the iMac, or hard drive itself. These are my thoughts, if anyone could suggest any other places to poke around for inquiry.
- the Maxtor 30GB replacement hard drive is being recognised successfully in Target Disk Mode by my Macbook Pro. This shows that the hard drive works correctly, and that the iMac can access all of the data on the hard drive. The hard drive is set to "Master".
- when creating clone in either SuperDuper, or Carbon Copy Cloner, the clone processes report that the final clone on the new hard drive will be 'bootable'. This is reiterated when I look for the 'information' on the one partition in Disk Utility.
I have also reset the PRAM and NVRAM and the Open Firmware, to no avail of the hard drive booting into Mac OS X.
I have looked into my Open Firmware settings to see whether there may be a setting to specifically direct the Mac's bootloader toward the "BootX" file on the hard drive. When querying the 'boot-device', the Open Firmware's response is "hd:,\\:tbxi" - is this the correct function to have?
When I purchased the iMac, the Tiger 10.4 PPC DVD/CDs were not included with the purchase. I'm trying my best to fix the problem without the discs if at all possible.
Any suggestions as to where I can go to help my mac boot into Mac OS X again would be muchly appreciated. Thanks.
- Andrew

My old computer had itunes and downloaded songs that I put on my ipod. My old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out and will not activate. How can I get access to my old songs on new computer.

My old computer had itunes and downloaded songs that I put on my ipod. Well, my old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out years ago and will not activate. I now have a new computer and iPod and I have an iTunes account on my iPhone5. How can I get access to my old songs on new computer? Are they lost for good? I have no info about my old computer and old account.

Downloading past purchases from the App Store ... - Support - Apple

HT1751 i bought a new, larger external hard drive. copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive. iTunes will not start or run unless old hard drive plugged in.??

I bought a new, larger external hard drive. I have my iTunes library on the external drive instead of C: drive, Using Windows 7.
I copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive.
iTunes will not start or run unless the old hard drive is plugged in.
If I disconnect the old drive iTunes shuts down.
Any ideas. ??

Hello kskip,
Thank you for providing so much information about what is going on. It sounds like you have setup iTunes to save new content to your new external hard drive in iTunes>Preferences, but it sounds like iTunes is not opening iTunes Library.itl file on the new external drive. You have one last step to take to have iTunes point to your new external hard drive rather than your old one:
Steps to create or choose a different iTunes Library file
If iTunes is running, quit iTunes.
If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
You should see the following screen:
Additional information
If you do not see the screen above, then you did not hold the correct key at the correct time. You may want to try again. Note that if you pinned iTunes to the Start menu programs, and open it that way, it may not work.
Once you select "Choose Library," you will need to navigate to the iTunes Library.itl file on your new external drive.
You can find the full article here:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/ht1589
Thank you for using Apple Support Communities.
Best,
Sheila M.

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

HT4413 When migrating from time machine to my new hard drive, only some files and applications and setting are transferred, not all of them. In my latest back up I have them all. How can I fix that?

When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.

sohs wrote:
When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.
If you want to use Time Machine to recover the contents of one of its a backups to a new drive, follow the instructions in Mac OS X 10.6: Recovering your entire system. Note that you must select the "Restore System From Backup" option from the Utilities menu of the Installer disc to do this.
Also note that if you are transferring files to a hard drive to be used with a different computer, you should use Migration Assistant instead. This intentionally will not copy everything because some settings, applications, etc. are not compatible computer-to-computer. Migration Assistant will copy everything that is.

After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

I have a TB internal drive, but this is what it shows for memory slots:
Memory Slots:
ECC:    Enabled
DIMM Riser B/DIMM 1:
Size:    2 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x0000
Part Number:    0x000000463732353642363145353830304600
Serial Number:    0x00000000
DIMM Riser B/DIMM 2:
Size:    2 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x0000
Part Number:    0x000000463732353642363145353830304600
Serial Number:    0x00000000
DIMM Riser A/DIMM 1:
Size:    1 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x48594D5035313241373243503844332D5335
Serial Number:    0x42076007
DIMM Riser A/DIMM 2:
Size:    1 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x48594D5035313241373243503844332D5335
Serial Number:    0x4207631E
DIMM Riser B/DIMM 3:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser B/DIMM 4:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser A/DIMM 3:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser A/DIMM 4:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

USB Hard Drive not showing up in AirPort Utility

I have been using this AirPort Extreme for over two years now and it's been working fine. I finally decided to buy a self-powered USB hard drive so I can share it over the network. However, after I unpacked the hard drive, connected it to my Mac and reformatted it to HFS+ Journaled and GUID. I plugged the hard drive into my AirPort Extreme's USB port and waited. I looked in my AirPort Utility and saw nothing in the disk list.
I spent hours searching online and discovered that I am not alone in this problem, although solutions are rare. I did try one solution where I hooked up the USB hard drive to a powered USB hub and the hub into AirPort Extreme. It actually worked once and after I rebooted everything, even though the hard drive still showed up in the disk list, no computers can connect to it. Although if I connect the hard drive directly to a Mac, it would still work perfectly.
Having a USB hub is not a long term solution not that it's working anymore anyway. I would appreciate any suggestions you may have, thanks!

Weilishu wrote:
Thanks for the response. However, I'm not sure what you mean.
So far my experience is far from "Just connect the external hard drive to the USB port on the back of your AirPort Extreme and — voilà".
did you read the support article Daddy linked ? it clearly says
JGG

Why is my External Hard Drive not showing in Aperture 3.6 Import?

Why is my External Hard Drive not showing in Aperture 3.6 Import?
Only my computer hard drive is and I want to import from an external drive. I have always been able to until I updated to Aperture 3.6 and Yosemite.

Only my computer hard drive is and I want to import from an external drive. I have always been able to until I updated to Aperture 3.6 and Yosemite.
I had the same problem. On the folders on the drive with the Aperture library did show in the Import panel. After I clicked the computer icon in the upper left corner of the Import panel, suddenly all drives appeared.
You can also try to drag the folder you want to import into the Import panel, to point the file chooser to the drive.

Windows Server 2012r2 Essentials - Dashboard - Server Folder and Hard Drives Not Showing..

Hi,
Following the last series of Windows updates, I'm experiencing problems with our WS2012R2 Essentials server. When opening the Dashboard, the 'home:getting started' tab shows all correct except 'server folders n/a'. On checking the Storage tab, the normal
display for 'server folders' and 'hard drives' just shows 'refreshing list of items'.
Despite symptoms above, Storage Space and Server Folders show correctly in server Windows Explorer and are available to client computers across the LAN. It just appears that for some reason the Dashboard cannot see them.
One other related symptom I've noted is that for some reason the 'wsestoragesvc' Windows Server Essentials Storage Service no longer starts automatically. Even when started manually Dashboard symptoms remain - server folders and hard drives aren't visible
on dashboard.
I've run sfc /scannow to check for problems - all clear and run chkdsk on the system volume.
Would welcome ideas on what steps to be taken to fix problem. Many thanks..

Hi,
The issue could be due to a custom service knocks on effect on the Windows Server Essentials Storage Service and causes the service no longer starts automatically.
You could refer to the thread below to troubleshoot the issue:
WHS 2011 Dashboard shows no users or drives
https://social.microsoft.com/Forums/en-US/99fe8229-091e-4130-a279-19e0b8d8a0a8/whs-2011-dashboard-shows-no-users-or-drives?forum=whs2011
If the issue still exists, try to reinstall the Windows Server Essentials.
Dashboard storage tab does not show folders or hard drives
https://social.technet.microsoft.com/Forums/en-US/d0c280cc-b0db-48d4-b649-d0db476fb4b5/dashboard-storage-tab-does-not-show-folders-or-hard-drives?foru
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

New 60 gb hard drive installed, ibook will not reboot

This is my first time using this type of support. Please share your advice as I learn the appropriate "norms" of the discussion system.
Computer:
2001 apple g3 ibook
dual usb ports
500 mgh
320 DRAM
10gb hard drive just swapped out for a 60 gb hard drive
Operating System:
I started out with the OS9 and OSX system configuration... I have since changed over to OSX exclusively... My current system is OSX 3.9 .
I have the original install disks and all of the other OSX upgrade disks available...
Problem:
My ibook kept saying that I did not have enough space on my start-up drive... I bought and installed a 60 gb hard drive after backing my hard drive up on an external hard drive.
I am unable to reboot my ibook after the install. I have tried holding the C button on start-up. I get a smiling face folder with a question mark flashing every few minutes. I have tried holding the X button on start-up. I get a "padlock_________arrow button". I have tried to put in my administrative password in the space between the padlock and the arrow button. When I do this, I see lots of dots flashing from left to right. I was hoping that the ibook was trying to boot from the external hard drive.
I have not tried to reboot with the original install disks that I received in 2001. I will try this today.
I am assuming that I put the install disk in and hold the C button as the chime sounds... If this gets me into the system, then what do I do...
I thought I knew what I was doing...but...
Thank you for your help and advice.

First please confirm what sort of install disks you have. Your iBook originally shipped with 10.0.3. Do you have the 10.3.x Panther retail full install CDs?
Hello:
Thank you for responding so quickly!
I do have the 10.0.3 install disks. I also have the full 10.2 install disk. I have the 10.3 update disk.
Problem:
I have tried to boot up using the 10.0.3 and the 10.2 install disks. I held the C button down as the chime was ending. I released the C button when I saw the folder symbol appear on my desktop... The folder has the OSX image on it... I do not have a curser available...
Any ideas?
I am trying to think back... I backed up my original hard drive to an external hard drive... I was under the impression that the external would act as a "bootable" disk...
I installed a new 60 gb hard drive.
I tried to reboot my computer with the C button pushed for the disk start up... folder appears with OSX logo on it.
and with the option down... also the X down... padlock appears with an arrow to its right.
Regards,
Stearns Sensei

New WD Caviar Hard Drive not showing up and S.M.A.R.T. is "not supported"

Similar Messages

Maybe you are looking for