New web folder access.

I am new at this and I setup my server and everything seems to be working fine - now I want to setup a virtual host and I point the website folder to the /Library/Webserver/<foldername>.
I uploaded the website files to this folder, and when I try to access the website from Safari I get the following message:
Access forbidden!
You don't have permission to access the requested object. It is either read-protected or not readable by the server.
If you think this is a server error, please contact the webmaster.
Error 403
However, when I change the folder back to the default /Library/Webserver/Documents everything works ok.
Looks like I need to change some permissions... but dont know how. Any help would be appreciated. Thanks,
-- Nash

Thank's it worked.......
I had the root folder to Read Only, but when I copied the files over to the server, the server changed the rest of the files to "No Access". Once I changed this back to "Read Only" for all the files, it's working! Thanks,
--- Nash

Similar Messages

How can I access my old iphoto libary on my newer laptop? I have a new iphoto folder on my laptop so I don't want to lose my current photos. I just want to add more.

How can I access my old iphoto libary on my newer laptop?
I have a new iphoto folder on my laptop so I don't want to lose my current photos. I just want to add more.

Do the following:
rename the old library to something other that iPhoto Library.
copy the library to the Pictures folder on your new laptop.
launch iPhoto with the Option key held down and select the old library to open it and convert it to the newer version.
Note: if the older version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 on it before opening with iPhoto on your new laptop.
If you want to merge the two libraries into one library and keep the edited versions, keywords, titles, etc. you'll need to use the paid version of iPhoto Library Manager to do the merging.

Issue while creating a new web part page (Safeunit.aspx) within a folder located under a Document Library.

Hi, I am facing an issue while creating a new web part page (Safeunit.aspx) within a folder (Safematic Seal Support Systems) located under a Document Library (Product Information Documents).
The path I am explaining:
Going to the Document Library (Product Information Documents) --> now inside that, clicking on a folder (Wet Seal Support
Systems) --> now inside the folder clicking on another sub-folder (Safematic Seal Support Systems) --> Here I want the web page Safeunit.aspx
Issue is that when I reach to the required destination, and want to create the web page by clicking on 'Site Action' --> 'Create' --> 'Web Part Page', now while selecting the Document Library name from the drop-down list, I do use 'Product
Information Documents' since the folder is inside this library only; but that create the page directly under the 'Product Information Documents' library, not under the sub-folder (Safematic Seal
Support Systems).
FYI, it is SP2007 version.
Kindly assist in this. Thanks in advance.

I see that you have the namespaces reference in your code.
I think you have changed the NameSpace name of your code to CreateSPFolder, change the reference in all your manifest, and other files to point to the current namespace name. It should help.
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

New Webi Document - First Folder is Always Expanded

Hello.
When ever we create a new Webi document, the first folder (class) on the Query panel is always expaned, the other folders are collapsed. How can we have all folders (classes) open collapsed rather than the first being expanded?
Our system is BOE XI 3.1 sp2, Java query editor, Tomcat for web.
Thank you, Nancy

Hi,
As far I know it is the default behaviour in WebI/Dashboards and even Deski(not sure). I think in order to collapseall the folders when opening a new/existing report it we need to do some customization.
Cheers,
Suresh Aluri.

Access protected web folder with jsp code or servlet transparently

Hi.
I'm developing a web site. I want to place some of the web pages (*.swf)
a protected web folder so that no one can DIRECTLY access them through wget or browser.
However these *.swf files will be called by other jsp or servlets to display their content
in broswer. What kind of authentication mechanism should I　ｕｓｅ？ Should I use filter?
Please give me some ideas.
Best regards.

A Filter is perfectly applicable. But you also have to define the requirements which a request must fullfill to retrieve the contents. For example a login mechanism of which the User is been stored in the session, or an unique key provided as request parameter, or maybe the referrer, etcetera.

Save for web folder prefs in new illustrator

Where can you set the save for web folder prefs in the new illustrator, i.e. not have it create an images folder...
-Thanks

On a MAC it does seem to stick on the last option you saved e.g. Jpeg if it was a Jpeg image.
For windows, this seems to work:
Find the file PhotoshopElementsEditor.exe using explorer (in the C:\Program Files\Adobe\Photoshop Elements 8.0 folder) right click on that file and choose Run As Administrator.
Go back to the editor, open an image, select Save for Web and choose jpeg; then save that file. The next time you run the editor and use the save for web command the jpeg type should hopefully stick as the default.

I have a new printer which behaves OK except it will not print directly from a web site accessed via Firefox. We do not have this problem if accessed via another browser. Suggestions?

New printer is Brother MFCJ615W. OS is XP. Computer is quite old Dell. Printer also refuses to print pictures from .jpg files - but the fact that I can print direct from web sites accessed via another browser suggests some of the problem is with Firefox. I asked this a few days ago and got an email reply giving me a link to click on - but this only produced an error message.

I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
the funny behaviour of the trackpad/cursor still persists. any suggestion???
thanks again

Need New for Read Access except Folder Creation

Hi,
I have some problem which is as follows:
I have created the folder ABC in KM Content -> documents -> ABC and given the Read Rights to the user user1, then created the KM Navigation iView.
Now user1 can see the ABC folder and the documents under it. The problem is that now I want to have New in the context menu and in New except folder creation, all are needed.
How I can achieve it, please help me on this.
Regards,
Deep

Hi,
From previlages perspective If user1 should create folders under ABC, then he need more than just READ rights!!
If you need a context menu New Folder, then you should set new_folder
UICommand to your KM Navigation iView's Layoutset's Collection Renderer. The Collection Renderer property is Collection Command Group 
So have a new UI Command group and add the new_folder UICommand to it.
http://help.sap.com/saphelp_nw70/helpdata/en/87/3d48475ee8bd448c4031aa98d90524/frameset.htm
Greetings,
Praveen Gudapati
[Points are welcome for helpful answers]

Web server only accessing the default web folder.

I have the web folder for my domain specified in the web folder on my server as: /Library/WebServer/Documents/whp/
But when I enter the domain in a web browser, it goes to the home page in the /Library/WebServer/Documents/ instead.
The IP address is set to any and the port is 80.
Any idea what I am doing wrong?
Mac Book Pro Mac OS X (10.4.8)

The website name you're typing into your web browser must exactly match either the domain name you have entered in Server Admin for the site, or an alias (under "Aliases"). So, for example, "example.com" and "www.example.com" do not match.
MacBook Pro Mac OS X (10.4.8)

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

Web folder on idisk????

okay I am using iweb to make my site and publishing on .mac. I have my idisk sync turned on so I can see it on my desktop.
now, I just published my site but I need to change a file that won't work the way I need it to in iweb so I have to hand code it and then replace the fuzzed one that iweb made. theortically I should be able to just drop it into my idisk and that will update the remote version. yes? trouble is where the heck are the files on the idisk. help says there should be a web folder for iweb stuff but it ain't there.

Go to iDisk/Web/Sites/iWeb/Sitename/Pagename.html
There are two ways to handle accessing your iDisk.
Method 1:
Turn on local copy of your iDisk in System Prefs, with or without automatic syncing.
If you publish your site via iWeb, now the updated pages exist online but the old pages are on your local iDisk. You need to sync (automatically or manually) to get the new pages on your local iDisk (on your computer).
Then you can open the updated files, make your html changes in Text Edit or whatever program, and SYNC AGAIN (automatically or manually) to update the online version of the site to match what you have just changed on your local iDisk
Method 2:
Mount the iDisk when needed via the "Go" menu in Finder. This is the ONLINE VERSION of your iDisk, not a local copy. When you publish your site via iWeb, the changes INSTANTLY appear on the iDisk on your desktop. If you make html edits or other changes, they appear INSTANTLY online.
I recommend Method 2 - much easier!!!

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
          Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
          Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
          File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
          Show Expired Certificates
select it. Otherwise it will show
          Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
          Secure Sockets Layer (SSL)
select
          no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
          When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
          Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
If that's not what you see, post the contents of the window.

Viewing 'deploy to web' folder content on computer

Hey everyone. I have been having this problem for the past few days and finally got an answer from the Adobe help line. But, adninjastrator helped me a lot, too! I wanted to post the solution on here for anyone who might have problems with this in the future.
Basically, I thought I had a glitchy version of Flash Catalyst because I couldn't view my 'deploy to web' folder contents on my computer. The video I would upload onto it just wouldn't play, like there was no video there, just the videoplayer skin. Well, apparently you can only view your 'deploy to web' files once you publish everything to a server. Here's a copy of the thread I had in Flash about this. Hope it helps people in the future!
Adobe called me back late afternoon yesterday. They said that there is no way you can view the 'deploy-to-web' files straight from a computer. They said that you HAVE to upload it to a server in order to view it. I've never heard of that for other video and web applications. That's so odd... So I wasn't expecting anything like that at all. I told them that it would probably be a good idea to make that much more apparent to people since most of us like to test our content BEFORE we upload it. The uploading process takes long enough. We don't want to spend all that time uploading and then see that something doesn't work right. Hopefully they make that apparent in the future. But he did give me instructions on how to access a local server just using your computer, not going to a free website hosting company or anything.
Here are the instructions on how to access your local host on the computer. This has to be done using a Windows computer or a Windows partition like I have. I don't know the instructions on how to do it for a Mac. I hope these instructions make sense and help you, motvsonofjack.
Version:1.0 StartHTML:0000000177 EndHTML:0000005707 StartFragment:0000002174 EndFragment:0000005671 SourceURL:file:///Users/MacPro/Desktop/ImportantFiles/Local%20Host.doc Local Host - Windows internal server: - Go to Control Panel/Programs and Features- On left hand side, click 'Turn Windows features on or off'- Go to option 'Internet Information services'. Click box beside it (Options selected after clicking plus button should be 'Web Management Tools' and 'World Wide Web Services')- Open Internet Explorer and type in address bar: localhost to check if server is working- Go to Computer/Local Disk (C:)/inetpub/wwwroot- Create new folder here and name it whatever you want (ex. deploy)- Paste files into this folder (ex: Flash Catalyst 'deploy-to-web' folder contents)- Go to Internet Explorer and type in address bar: localhost/nameofcreatedfolder(ex:deploy)/main.html(or whatever file you want to play) - Website should run

Hi there,
I can view your swf under http://www.skribblz.com/Main.swf (although it looks to be just a background).
http://www.skribblz.com/index.html is still your old page.
What you'd normally do to modify your webpage, is:
Copy the contents of the deploy-to-web folder, to the public-html folder.
Verify that yourdomain/Main.html, and yourdomain/Main.swf both load correctly
Delete index.html.
Rename Main.html to index.html
You should not rename the swf.
-Bear

Getting error while creating a new web app saying "The password supplied with the username domainname\username was not correct. Verify that it was entered correctly and try again"

Hi ,
I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again".
I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
What should i do ??
Thanks in advance.
Regards, Anurag

HI,
right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
let us know your result
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

New Web Application not creating correctly

I'm having an odd occurrence happen about 50% of the time right now when creating new web applications during my migration from SP2010 to SP2013.
During creating a web application in Central Admin, I can get through the first setup page, then get to the "This shouldn't take long" page and will sit there for 30+ minutes. I end up closing the window and will see that the Web application is there in
Central admin, and sometimes the DB will be created, other times not, not a big issue since I'm mounting a sp2010 database to this web application.
What I do notice is that either a IIS site will either not be created at all, or it will be created, but the Virtual Folder is empty. When trying to delete the Web Application through central admin or PowerShell it will hang for hours until the next day
when it's finally deleted. During this time I am not able to create any other web applications. It's usually at this time that I can successfully create a new web applications but even that is unreliable.
Has anyone ran into this issue or can suggest any workarounds to get this working? I'm wondering if copying the contents of another web application's virtual directory to the failed web application's virtual directory will be a workaround. I still need to
verify if creating a web application through PowerShell gives me the same headache but at the moment I'm currently waiting for a web application to delete.

Finally got this resolved after an 8 hour call with Microsoft. After finally getting the Microsoft SharePoint Foundation Web Application service to restart (took 4 hours) We found that changing the Shutdown time in the Web Application Pool for the Central
Admin pool to 400 allowed for the Web Application to complete successfully.
I'm still confused to why everything is taking so long now to complete so i'll have to look into that next.
Folks, this is a minor problem that seems to be creeping up more and more. I personally have performed over 8 installs in various environments. I have seen this issue in 6 out of the 8 environments I have created. All servers I have tried a variation of
software. In MOST of my tests, this seems to be a problem. Not sure why they decide to recycle the App Pool just before they perform an "Virtual Directory Copy." Here are the results of my tests. I was very methodical in my testing and made sure these were
clean downloads every time. As you will see, I tried variations of hardware increases, physical to virtual, database versions and patch levels...etc.
Test #
Hardware
Software
Server Type
Install Type
Problems Creating Web Apps
Work Around
Resolution
1
HP Proliant DL360 G6, 16gb memory, 146gb - C, 146gb D (Pagefile), 146gb E, 2 Quad Procs
Windows 2008R2 (All Patches), SQL 2012 w/SP1, SharePoint 2013 Server
Physical
Clean Install and downloads
Yes
Copy Contents of Central Admin Virtual Directory to new Web Application
Increase Shutdown time to 400
2
Host Server = Dell R900 256gb Mem, 146gb C, 300gb D (Pagefile), 2tb E, 4 Quad Procs; Virtual Guest =
100gb - C, 2 Logical Procs, 8gb memory
Windows 2008R2 (All Patches), SQL 2012, SharePoint 2013 Server
Virtual
Clean Install and downloads
Yes
Copy Contents of Central Admin Virtual Directory to new Web Application
Increase Shutdown time to 400
3
Host Server = Dell R900 256gb Mem, 146gb C, 300gb D (Pagefile), 2tb E, 4 Quad Procs; Virtual Guest =
100gb - C, 2 Logical Procs, 8gb memory
Windows 2008R2 (All Patches), SQL 2012 w/SP1, SharePoint 2013 Server
Virtual
Clean Install and downloads
No
4
Host Server = Dell R900 256gb Mem, 146gb C, 300gb D (Pagefile), 2tb E, 4 Quad Procs; Virtual Guest =
100gb - C, 2 Logical Procs, 8gb memory
Windows 2008R2 (All Patches), SQL 2012 w/SP1, SharePoint 2013 Server
Virtual
Clean Install and downloads
Yes
Copy Contents of Central Admin Virtual Directory to new Web Application
Increase Shutdown time to 400
5
Host Server = Dell R900 256gb Mem, 146gb C, 300gb D (Pagefile), 2tb E, 4 Quad Procs; Virtual Guest =
100gb - C, 4 Logical Procs, 16gb memory
Windows 2008R2 (All Patches), SQL 2008 R2 w/SP1, SharePoint 2013 Server
Virtual
Clean Install and downloads
Yes
Copy Contents of Central Admin Virtual Directory to new Web Application
Increase Shutdown time to 400
6
Host Server = Dell R900 256gb Mem, 146gb C, 300gb D (Pagefile), 2tb E, 4 Quad Procs; Virtual Guest =
100gb - C, 4 Logical Procs, 16gb memory
Windows 2008R2 (All Patches), SQL 2008 R2 w/SP2, SharePoint 2013 Server
Virtual
Clean Install and downloads
No
7
Host Server = Dell R900 256gb Mem, 146gb C, 300gb D (Pagefile), 2tb E, 4 Quad Procs; Virtual Guest =
100gb - C, 4 Logical Procs, 16gb memory
Windows 2008R2 (All Patches), SQL 2008 R2 w/SP2, SharePoint 2013 Server
Virtual
Clean Install and downloads
Yes
Copy Contents of Central Admin Virtual Directory to new Web Application
Increase Shutdown time to 400
8
Host Server = Dell R900 256gb Mem, 146gb C, 300gb D (Pagefile), 2tb E, 4 Quad Procs; Virtual Guest =
100gb - C, 4 Logical Procs, 32gb memory
Windows 2008R2 (All Patches), SQL 2008 R2 w/SP2, SharePoint 2013 Server
Virtual
Clean Install and downloads
Yes
Copy Contents of Central Admin Virtual Directory to new Web Application
Increase Shutdown time to 400

New web folder access.

Similar Messages

Maybe you are looking for