New web resource

Hi Everyone
A few of you may already know about this, but we now have a new resource for both documentation and tutorials at - http://www.webplatform.org/
It covers all the resources that a designer/developer requires regarding the browser side of the web from html(5) to WebGL. The site, (and much of the content) is still in the alpha stage of development, but as it is a collaboration by all the major players in the field it is I think well worth a mention here on the forum, (and possibly a bookmark).
Unlike the w3schools site this one is actually convened by the W3C.
PZ

pziecina wrote:
It is organized as a wiki, with stewards checking content changes etc. if you are interested in becoming a steward then see - http://www.webplatform.org/stewards/
I  think that "stewards" are basically sponsors who are financing this initiative with both cash and staff. I know that Chris Mills is being loaned to the W3C for several days a week at Opera's expense.
But I think anyone can contribute. I was able to start editing pages as soon as I signed up for an account. I didn't have to wait to be approved. There's a guide to the sort of contributions individuals can make at http://docs.webplatform.org/wiki/WPD:Getting_Started.
The biggest obstacles to getting involved are the sheer size of the site and the weird Wikimedia markup that you need to use. I've been fleshing out some CSS property definitions, and have found it quite time-consuming, even though I've just finished writing a book on CSS3, so have most of the information easily to hand.
When you contribute to a page, you can "watch" it, and receive an email notification if anyone else alters the page. All the pages I edited on Tuesday were updated by someone else within a couple of hours. My material was left untouched, but a minor addition was made regarding Firefox 16. I've no idea if the person who made the changes was an official editor making sure I wasn't filling the site with spam. But without some oversight of the content and contributors, it could become a problem.

Similar Messages

  • How do I see http headers in new web inspector resource tab?

    In Safari 4.x there was a simple tab to see the http headers, but in the new fancy resource tab I can't find them anywhere.   Where did they go?

    Perhaps you need to take some tutorials.
    LabVIEW Introduction Course - Three Hours
    LabVIEW Introduction Course - Six Hours
    Attachments:
    Example_VI_BD.png ‏11 KB

  • Create a new web application, how shall I update the file server.xml

    Hi,
    I will create a new web application, i.e named newApp. Then I create a file structure as follows:
    - <server-root>/newApp
    - <server-root>/newApp/WEB-INF
    - <server-root>/newApp/WEB-INF/classes
    Then I must tell the server that I have created a new web application. Then I must update my file server.xml, How shall I do this and where in the file shall I type in the new information?
    I use windows XP Pro, and Tomcat 4.1.27.
    My server.xml file looks like below:
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN" debug="0">
    <!-- Comment these entries out to disable JMX MBeans support -->
    <!-- You may also configure custom components (e.g. Valves/Realms) by
    including your own mbean-descriptor file(s), and setting the
    "descriptors" attribute to point to a ';' seperated list of paths
    (in the ClassLoader sense) of files to add to the default list.
    e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
    -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
    debug="0"/>
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
    debug="0"/>
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved">
    </Resource>
    <ResourceParams name="UserDatabase">
    <parameter>
    <name>factory</name>
    <value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
    </parameter>
    <parameter>
    <name>pathname</name>
    <value>conf/tomcat-users.xml</value>
    </parameter>
    </ResourceParams>
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Tomcat-Standalone">
    <!-- A "Connector" represents an endpoint by which requests are received
    and responses are returned. Each Connector passes requests on to the
    associated "Container" (normally an Engine) for processing.
    By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
    You can also enable an SSL HTTP/1.1 Connector on port 8443 by
    following the instructions below and uncommenting the second Connector
    entry. SSL support requires the following steps (see the SSL Config
    HOWTO in the Tomcat 4.0 documentation bundle for more detailed
    instructions):
    * Download and install JSSE 1.0.2 or later, and put the JAR files
    into "$JAVA_HOME/jre/lib/ext".
    * Execute:
    %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
    $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
    with a password value of "changeit" for both the certificate and
    the keystore itself.
    By default, DNS lookups are enabled when a web application calls
    request.getRemoteHost(). This can have an adverse impact on
    performance, so you can disable it by setting the
    "enableLookups" attribute to "false". When DNS lookups are disabled,
    request.getRemoteHost() will return the String version of the
    IP address of the remote client.
    -->
    <!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8080" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="100" debug="0" connectionTimeout="20000"
    useURIValidationHack="false" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to -1 -->
    <!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8443" minProcessors="5" maxProcessors="75"
    enableLookups="true"
    acceptCount="100" debug="0" scheme="https" secure="true"
    useURIValidationHack="false" disableUploadTimeout="true">
    <Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
    clientAuth="false" protocol="TLS" />
    </Connector>
    -->
    <!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8009" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" connectionTimeout="0"
    useURIValidationHack="false"
    protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <!--
    <Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
    port="8009" minProcessors="5" maxProcessors="75"
    acceptCount="10" debug="0"/>
    -->
    <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
    <!-- See proxy documentation for more information about using this. -->
    <!--
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8082" minProcessors="5" maxProcessors="75"
    enableLookups="true"
    acceptCount="100" debug="0" connectionTimeout="20000"
    proxyPort="80" useURIValidationHack="false"
    disableUploadTimeout="true" />
    -->
    <!-- Define a non-SSL legacy HTTP/1.1 Test Connector on port 8083 -->
    <!--
    <Connector className="org.apache.catalina.connector.http.HttpConnector"
    port="8083" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" />
    -->
    <!-- Define a non-SSL HTTP/1.0 Test Connector on port 8084 -->
    <!--
    <Connector className="org.apache.catalina.connector.http10.HttpConnector"
    port="8084" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" />
    -->
    <!-- An Engine represents the entry point (within Catalina) that processes
    every request. The Engine implementation for Tomcat stand alone
    analyzes the HTTP headers included with the request, and passes them
    on to the appropriate Host (virtual host). -->
    <!-- You should set jvmRoute to support load-balancing via JK/JK2 ie :
    <Engine name="Standalone" defaultHost="localhost" debug="0" jmvRoute="jvm1">
    -->
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Standalone" defaultHost="localhost" debug="0">
    <!-- The request dumper valve dumps useful debugging information about
    the request headers and cookies that were received, and the response
    headers and cookies that were sent, for all requests received by
    this instance of Tomcat. If you care only about requests to a
    particular virtual host, or a particular application, nest this
    element inside the corresponding <Host> or <Context> entry instead.
    For a similar mechanism that is portable to all Servlet 2.3
    containers, check out the "RequestDumperFilter" Filter in the
    example application (the source for this filter may be found in
    "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
    Request dumping is disabled by default. Uncomment the following
    element to enable it. -->
    <!--
    <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
    -->
    <!-- Global logger unless overridden at lower levels -->
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="catalina_log." suffix=".txt"
    timestamp="true"/>
    <!-- Because this Realm is here, an instance will be shared globally -->
    <!-- This Realm uses the UserDatabase configured in the global JNDI
    resources under the key "UserDatabase". Any edits
    that are performed against this UserDatabase are immediately
    available for use by the Realm. -->
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    debug="0" resourceName="UserDatabase"/>
    <!-- Comment out the old realm but leave here for now in case we
    need to go back quickly -->
    <!--
    <Realm className="org.apache.catalina.realm.MemoryRealm" />
    -->
    <!-- Replace the above Realm with one of the following to get a Realm
    stored in a database and accessed via JDBC -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="org.gjt.mm.mysql.Driver"
    connectionURL="jdbc:mysql://localhost/authority"
    connectionName="test" connectionPassword="test"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="oracle.jdbc.driver.OracleDriver"
    connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
    connectionName="scott" connectionPassword="tiger"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="sun.jdbc.odbc.JdbcOdbcDriver"
    connectionURL="jdbc:odbc:CATALINA"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!-- Define the default virtual host -->
    <Host name="localhost" debug="0" appBase="webapps"
    unpackWARs="true" autoDeploy="true">
    <!-- Normally, users must authenticate themselves to each web app
    individually. Uncomment the following entry if you would like
    a user to be authenticated the first time they encounter a
    resource protected by a security constraint, and then have that
    user identity maintained across all web applications contained
    in this virtual host. -->
    <!--
    <Valve className="org.apache.catalina.authenticator.SingleSignOn"
    debug="0"/>
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.AccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <!-- Logger shared by all Contexts related to this virtual host. By
    default (when using FileLogger), log files are created in the "logs"
    directory relative to $CATALINA_HOME. If you wish, you can specify
    a different directory with the "directory" attribute. Specify either a
    relative (to $CATALINA_HOME) or absolute path to the desired
    directory.-->
    <Logger className="org.apache.catalina.logger.FileLogger"
    directory="logs" prefix="localhost_log." suffix=".txt"
    timestamp="true"/>
    <!-- Define properties for each web application. This is only needed
    if you want to set non-default properties, or have web application
    document roots in places other than the virtual host's appBase
    directory. -->
         <DefaultContext reloadable="true"/>
    <!-- Tomcat Root Context -->
    <Context path="" docBase="ROOT" debug="0"/>
    <!-- Tomcat Examples Context -->
    <Context path="/examples" docBase="examples" debug="0"
    reloadable="true" crossContext="true">
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="localhost_examples_log." suffix=".txt"
    timestamp="true"/>
    <Ejb name="ejb/EmplRecord" type="Entity"
    home="com.wombat.empl.EmployeeRecordHome"
    remote="com.wombat.empl.EmployeeRecord"/>
    <!-- If you wanted the examples app to be able to edit the
    user database, you would uncomment the following entry.
    Of course, you would want to enable security on the
    application as well, so this is not done by default!
    The database object could be accessed like this:
    Context initCtx = new InitialContext();
    Context envCtx = (Context) initCtx.lookup("java:comp/env");
    UserDatabase database =
    (UserDatabase) envCtx.lookup("userDatabase");
    -->
    <!--
    <ResourceLink name="userDatabase" global="UserDatabase"
    type="org.apache.catalina.UserDatabase"/>
    -->
    <!-- PersistentManager: Uncomment the section below to test Persistent
    Sessions.
    saveOnRestart: If true, all active sessions will be saved
    to the Store when Catalina is shutdown, regardless of
    other settings. All Sessions found in the Store will be
    loaded on startup. Sessions past their expiration are
    ignored in both cases.
    maxActiveSessions: If 0 or greater, having too many active
    sessions will result in some being swapped out. minIdleSwap
    limits this. -1 or 0 means unlimited sessions are allowed.
    If it is not possible to swap sessions new sessions will
    be rejected.
    This avoids thrashing when the site is highly active.
    minIdleSwap: Sessions must be idle for at least this long
    (in seconds) before they will be swapped out due to
    activity.
    0 means sessions will almost always be swapped out after
    use - this will be noticeably slow for your users.
    maxIdleSwap: Sessions will be swapped out if idle for this
    long (in seconds). If minIdleSwap is higher, then it will
    override this. This isn't exact: it is checked periodically.
    -1 means sessions won't be swapped out for this reason,
    although they may be swapped out for maxActiveSessions.
    If set to >= 0, guarantees that all sessions found in the
    Store will be loaded on startup.
    maxIdleBackup: Sessions will be backed up (saved to the Store,
    but left in active memory) if idle for this long (in seconds),
    and all sessions found in the Store will be loaded on startup.
    If set to -1 sessions will not be backed up, 0 means they
    should be backed up shortly after being used.
    To clear sessions from the Store, set maxActiveSessions, maxIdleSwap,
    and minIdleBackup all to -1, saveOnRestart to false, then restart
    Catalina.
    -->
    <!--
    <Manager className="org.apache.catalina.session.PersistentManager"
    debug="0"
    saveOnRestart="true"
    maxActiveSessions="-1"
    minIdleSwap="-1"
    maxIdleSwap="-1"
    maxIdleBackup="-1">
    <Store className="org.apache.catalina.session.FileStore"/>
    </Manager>
    -->
    <Environment name="maxExemptions" type="java.lang.Integer"
    value="15"/>
    <Parameter name="context.param.name" value="context.param.value"
    override="false"/>
    <Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
    type="javax.sql.DataSource"/>
    <ResourceParams name="jdbc/EmployeeAppDb">
    <parameter><name>username</name><value>sa</value></parameter>
    <parameter><name>password</name><value></value></parameter>
    <parameter><name>driverClassName</name>
    <value>org.hsql.jdbcDriver</value></parameter>
    <parameter><name>url</name>
    <value>jdbc:HypersonicSQL:database</value></parameter>
    </ResourceParams>
    <Resource name="mail/Session" auth="Container"
    type="javax.mail.Session"/>
    <ResourceParams name="mail/Session">
    <parameter>
    <name>mail.smtp.host</name>
    <value>localhost</value>
    </parameter>
    </ResourceParams>
    <ResourceLink name="linkToGlobalResource"
    global="simpleValue"
    type="java.lang.Integer"/>
    </Context>
    </Host>
    </Engine>
    </Service>
    </Server>

    To use servlets u have indeed to update your web.xml...Well I'm not sure this is relevant to your case anyway.
    You have to add a <servlet> element to this file.
    Something like this:
    <servlet>
    <servlet-name>blabla</servlet-name>
    <servlet-class>blablapackage.Blablaclass</servlet-class>
    <init-param>...</init-param>
    </servlet>
    Now this may not solve your problem. Make sure you refer to your servlets using their full qualified names.btw, just to be sure, what is your definition of "servlet"? (i mean: any java class or only javax.servlet.Servlet)

  • TREX Installation, Error in phase - Install TREX web resources and finalize

    Hello,
    Platforms:
    SO - Win 2008 (R2) X64
    During the last phase "Install TREX web resources and finalize instance" in installation process of TREX 7.1, it show me a weird error...
    It seems that was some problem during the creation of sap start service of this new instance... but that is weird because I checked at services.msc and that service SAPTSM_02 and nothing seems wrong with it, it seems that was well created and it is in Started mode!... I checked firewall settings (all of them are in OFF status), I also checked CUA settings (is stopped)...
    I searched for this error and I found the following SDN forum:
    SAPNW EHP1 SR1
    I already press the retry button but it always show me the same error.
    During this phase the SAPInst window show some information and in there I see this two:
    creating sap start service of instance TSM/TRX02...
    service not correcttly installed.
    It is very weird thing!
    I will post some log files such as sapstartsrv.exe and sapinst.log.
    sapstartsrv.exe:
    Test call to Service failed: 80080005
    CO_E_SERVER_EXEC_FAILURE: Server execution failed
    Service not correctly installed
    sapinst.log:
    INFO 2012-01-20 16:29:24.446
    Creating file C:Program Filessapinst_instdirNW702STANDALONETREXCIsapstartsrv.exe.log.
    INFO 2012-01-20 16:29:24.457
    Output of F:usrsapTSMTRX02exesapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
    WARNING 2012-01-20 16:31:41.182
    Execution of the command "F:usrsapTSMTRX02exesapstartsrv.exe -stdin" finished with return code -1. Output:
    Test call to Service failed: 80080005
    CO_E_SERVER_EXEC_FAILURE: Server execution failed
    Service not correctly installed.
    ERROR 2012-01-20 16:31:41.380
    MOS-01011  'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.
    ERROR 2012-01-20 16:31:41.381
    MOS-01011  'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.
    ERROR 2012-01-20 16:31:41.470
    FCO-00011  The step createService with step key |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0|TREX_MAIN|ind|ind|TREX|ind|0|0|createService was executed with status ERROR ( Last error reported by the step :'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.).
    Can you help me please, how can I solve this?
    Kind regards,
    JDimas

    Hello Arjun Venkateswarlu,
    1).Is your Windows Firwall is enabled ? Disable the windows Firewall and also restart SAPinst
    - As I said the windows firewall is disable (OFF)
    2). Make sure that <sid>adm belongs to the local admins or Better provide the domain admin rights to the id which you are using for installation if it is domain installation.
    - All the created users during this installation belongs to local admins. This isn´t a domain installation!
    3). Try Restarting the installation by stopping and starting Windows and restart SAPINST and coninue Old Installation again.
    - I already did that... but it continues to show me the same error!
    Any other tip?
    Kind regards,
    JDimas

  • Best practice to develop the news web part to retrieve news data across the farms

    Hi,
    We have developed the News Web part. The functionality  it pulls the news from other SharePoint Farms and display it in the site. Currently we are using secure store service to  to connect to different FARM to retrieve the news from that FARM.
    The issue with this approach is that every time user hits the page it  will always hit the Secure Store service.There are almost 80K users who will be using this web part. Moreover this web part connects to multiple sites for multiple news from different
    division.What should be the best practice to develop such kind of web part without consuming the server resources and keep hitting the server till we get the new news.News does not change very often.
    Regards
    Rajaniesh

    Hi,
    According to your description, my understanding is that you want to know which is the best way  to handle the large complication of SharePoint cross farm retrieving data.
    If you are developing the custom web part to retrieve data from other farm, I suggest you can firstly create a custom timer job to get data hourly in the backend and restore the data in a list. Then you can create a web part to link to the list to display
    the data.
    For cross farm accessing data, I suggest you can create a custom web service to achieve it.
    Also, you can use ajax to display the web part data asynchronously. It will improve the performance and reduce the server pressure.
    Here are some detailed articles for your reference:
    Create and Deploy Custom Timer Job Definition in SharePoint Programatically
    Creating a Custom ASP.NET Web Service
    Create asynchronous web parts for Sharepoint
    Thanks
    Best Regards
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jerry Guo
    TechNet Community Support

  • Bridge CS4 Web Galleries - Adding New Web Gallery Presets

    Hi. How can i import new web gallery presets into Bridge CS4, for example from lightroomgalleries co? Im on a French Win XP and Photoshop CS4. I know i have to create a folder within Common Files/Adobe/Bridge CS4 Extensions/Adobe output Module/mediagallery/resources/templates/. If i see it right, i have to create another styles folder within that? I manage Bridge CS4 to offer the imported preset in the presets menu, but the results look generic, not like what the preset should do according to the description on the web site. So what can i do?
    Are there other sources for other gallery presets?
    I would also like to know how to set the name that the Presets menu uses. Ive seen this .dat file which seems to control the names for the menu, but wasnt able to change the name appearing in the menu.
    For that, I had copied a complete style like 03filmstrip, changed the xml files and renamed the folder to 09filmstripVariant. Thus it appeared with the original name, but at position 9 in the menu. I didnt find out how to make it appear with a new name.
    In these names for Bridge gallery presets, are there certain characters i must avoid like underscore, minus or blank?
    Thanks for all clear info!

    Hi all<br />It is still possible to create webgalleries and contactsheets in CS4, but you have to copy some files and folders from a folder called Goodies which you can find on you install disk or download as extras from Adobe.com. <br />In the "...Goodies\Optional plug-ins" folder there is a OptionalPluginsReadMe.pdf where they among other things write:<br /><br />"1. From the Photoshop CS4 install disc, drop the //<language>/Goodies/Optional plug-<br />Ins/Automate/WebContactSheetII plug-in into the //Adobe Photoshop CS4/Plugins/<br />Automate folder<br /><br />2. From the Photoshop CS4 install disc, drop the //<language>/Goodies/Presets/Web Photo<br />Gallery folder into the //Adobe Photoshop CS4/Presets folder and then restart Photoshop."

  • Issue with New Web Form Created for Web Page Composer

    Hello,
    I created new Web Form as per the example given on sdn: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2041eb17-6001-2b10-b08d-b95ce55fa9b7
    Everything looks fine with all the setup but when I restarted the Portal, I am not seeing this new webform where we see Article, List, Banner and other webform to create new document in Web Page Composer section.
    Any idea what could be the reason behind this would be really helpful?
    regards,
    Jaish

    Hi Jaish,
    Can you please confirm if you have followed all the steps in here.
    The following configuration steps are necessary:
    1.Create a KM Resource Type
    2.Create a Web Resource Type and assign the KM Resource Type to it
    3.Extending the Configuration of Existing Web Resource Types and Containers
    4.Referencing the XSL File in the Stylesheet Object
    5.Creating a Stylesheet Group
    6.Referencing the XML File in the Document Type
    7.Restart the portal
    Make sure that you store the files in the following KM folders:
    The XML file in the /etc/wpceditor/types directory, the XSL files in the /etc/wpceditor/styles directory.
    Please refer to this link.
    http://help.sap.com/saphelp_nw70/helpdata/EN/45/599b78b0aa3bdde10000000a1553f7/frameset.htm
    Hope this helps.
    Cheers,
    Sandeep Tudumu

  • Getting error while creating a new web app saying "The password supplied with the username domainname\username was not correct. Verify that it was entered correctly and try again"

    Hi ,
    I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username  was not correct. Verify that it was entered correctly and try again".
    I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
    What should i do ??
    Thanks in advance.
    Regards, Anurag

    HI,
    right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
    http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
    let us know your result
    Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer

  • New Web Application not creating correctly

    I'm having an odd occurrence happen about 50% of the time right now when creating new web applications during my migration from SP2010 to SP2013.
    During creating a web application in Central Admin, I can get through the first setup page, then get to the "This shouldn't take long" page and will sit there for 30+ minutes. I end up closing the window and will see that the Web application is there in
    Central admin, and sometimes the DB will be created, other times not, not a big issue since I'm mounting a sp2010 database to this web application.
    What I do notice is that either a IIS site will either not be created at all, or it will be created, but the Virtual Folder is empty. When trying to delete the Web Application through central admin or PowerShell it will hang for hours until the next day
    when it's finally deleted. During this time I am not able to create any other web applications. It's usually at this time that I can successfully create a new web applications but even that is unreliable.
    Has anyone ran into this issue or can suggest any workarounds to get this working? I'm wondering if copying the contents of another web application's virtual directory to the failed web application's virtual directory will be a workaround. I still need to
    verify if creating a web application through PowerShell gives me the same headache but at the moment I'm currently waiting for a web application to delete.

    Finally got this resolved after an 8 hour call with Microsoft. After finally getting the Microsoft SharePoint Foundation Web Application service to restart (took 4 hours) We found that changing the Shutdown time in the Web Application Pool for the Central
    Admin pool to 400 allowed for the Web Application to complete successfully.
    I'm still confused to why everything is taking so long now to complete so i'll have to look into that next.
    Folks, this is a minor problem that seems to be creeping up more and more. I personally have performed over 8 installs in various environments. I have seen this issue in 6 out of the 8 environments I have created. All servers I have tried a variation of
    software. In MOST of my tests, this seems to be a problem. Not sure why they decide to recycle the App Pool just before they perform an "Virtual Directory Copy." Here are the results of my tests. I was very methodical in my testing and made sure these were
    clean downloads every time. As you will see, I tried variations of hardware increases, physical to virtual, database versions and patch levels...etc.
    Test #
    Hardware
    Software
    Server Type
    Install Type
    Problems Creating Web Apps
    Work Around
    Resolution
    1
    HP   Proliant DL360 G6, 16gb memory, 146gb - C, 146gb D (Pagefile), 146gb E, 2   Quad Procs
    Windows   2008R2 (All Patches), SQL 2012 w/SP1, SharePoint 2013 Server
    Physical
    Clean Install and downloads
    Yes
    Copy Contents of Central Admin   Virtual Directory to new Web Application
    Increase Shutdown time to 400
    2
    Host Server = Dell R900 256gb Mem, 146gb   C, 300gb D (Pagefile), 2tb E, 4 Quad Procs; Virtual Guest = 
    100gb - C, 2 Logical Procs, 8gb memory
    Windows 2008R2 (All Patches), SQL 2012,   SharePoint 2013 Server
    Virtual
    Clean Install and downloads
    Yes
    Copy   Contents of Central Admin Virtual Directory to new Web Application
    Increase   Shutdown time to 400
    3
    Host   Server = Dell R900 256gb Mem, 146gb C, 300gb D (Pagefile), 2tb E, 4 Quad   Procs; Virtual Guest = 
    100gb - C, 2   Logical Procs, 8gb memory
    Windows   2008R2 (All Patches), SQL 2012 w/SP1, SharePoint 2013 Server
    Virtual
    Clean   Install and downloads
    No
    4
    Host Server = Dell R900 256gb Mem, 146gb   C, 300gb D (Pagefile), 2tb E, 4 Quad Procs; Virtual Guest = 
    100gb - C, 2 Logical Procs, 8gb memory
    Windows 2008R2 (All Patches), SQL 2012   w/SP1, SharePoint 2013 Server
    Virtual
    Clean Install and downloads
    Yes
    Copy   Contents of Central Admin Virtual Directory to new Web Application
    Increase   Shutdown time to 400
    5
    Host   Server = Dell R900 256gb Mem, 146gb C, 300gb D (Pagefile), 2tb E, 4 Quad   Procs; Virtual Guest = 
    100gb - C, 4   Logical Procs, 16gb memory
    Windows   2008R2 (All Patches), SQL 2008 R2 w/SP1, SharePoint 2013 Server
    Virtual
    Clean   Install and downloads
    Yes
    Copy Contents of Central Admin   Virtual Directory to new Web Application
    Increase Shutdown time to 400
    6
    Host Server = Dell R900 256gb Mem, 146gb   C, 300gb D (Pagefile), 2tb E, 4 Quad Procs; Virtual Guest = 
    100gb - C, 4 Logical Procs, 16gb memory
    Windows 2008R2 (All Patches), SQL 2008 R2   w/SP2, SharePoint 2013 Server
    Virtual
    Clean Install and downloads
    No
    7
    Host   Server = Dell R900 256gb Mem, 146gb C, 300gb D (Pagefile), 2tb E, 4 Quad   Procs; Virtual Guest = 
    100gb - C, 4   Logical Procs, 16gb memory
    Windows   2008R2 (All Patches), SQL 2008 R2 w/SP2, SharePoint 2013 Server
    Virtual
    Clean   Install and downloads
    Yes
    Copy Contents of Central Admin   Virtual Directory to new Web Application
    Increase Shutdown time to 400
    8
    Host   Server = Dell R900 256gb Mem, 146gb C, 300gb D (Pagefile), 2tb E, 4 Quad   Procs; Virtual Guest = 
    100gb - C, 4   Logical Procs, 32gb memory
    Windows   2008R2 (All Patches), SQL 2008 R2 w/SP2, SharePoint 2013 Server
    Virtual
    Clean   Install and downloads
    Yes
    Copy   Contents of Central Admin Virtual Directory to new Web Application
    Increase   Shutdown time to 400

  • IN R12, NEW WEB PAGES ARE OPENED IN THE MINIMIZED POSITION

    We've upgraded to Release 12.0.5. Whenever we click on functions that open new web pages, the new web page opens in the minimized position.
    This is very troublesome for our user community because they often do not notice the new page blinking and they keep clicking the link many times.

    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    You can also try to set the gfx.content.azure.enabled pref to false or if this didn't help disable Direct2D by setting the gfx.direct2d.disabled pref to true on the about:config page and leave hardware acceleration otherwise enabled.
    *[[/questions/942265]] Font is messed up on Firefox 17.0

  • LDAP is not working on new Web Server

    Hi, I configured LDAP authentication and it was working fine. After this I installed a new web server. I copied the security certificate etc ( copied everything from other web server) onto new webserver. When I try to login into Infoview or CMC then I get error message "Security plugin error: Failed to set parameters on plugin" from the new web server. Its working fine from the old web servers.
    Not sure what else I have to do now as I have done the same thing on old servers in the past.
    We are on BOXI R2 SP3 with web server on IIS 6.0. We have three web servers  and 3 processing servers ( with all services) in cluster env.
    Thanks,

    I am sorry I got confused with Pure Enterise authentication. I should have referred to my notes. I apologize for this. Web application server is involved in communicating to LDAP. Below is the process
    1) User logs into the application
    2) Web application server security plugin sends credential to LDAP directory
    3) LDAP directory authenticate users.
    4) Web application server's security plugin sends users credential to LDAP
    5) CMS requests user and group info from LDAP
    6) The LDAP returns this information to CMS Security plugin
    7) CMS will grant access if users is member of mapped group
    8) If access is granted then both CMS and WAS plugin create a session
    9) The WAS sends an enterprise session token to user's browser
    I was referring to login into Infoview using LDAP.
    Thanks,

  • HT202225 I keep getting pop ups on my iMac for the first time in 6 years after one of my kids tried to watch football through crichd tv. safari now opens with smart search engine rather than google every time i try to open a new web page.

    Ever since one of my kids tried to watch football on a website called crichd tv I keep getting pop us come up like Mackeeper and every time i try to open a web page it comes up with Smartsearch rather than google which is my preferred search engine in preferences. I have blocked extensions and changed homepage to google but this Smartsearch keeps overriding. Also a thing called MacKeeper keeps popping up I have followed the instructions to uninstall but the file it says to move to trash from the Applications folder but it simply isn't there or anywhere else. The file to uninstall Smartsearch is also not where they say it is in Library>frameworks>
    Very frustrating from going from a perfectly working system to a now very frustrating and annoying pop ups coming uo after every time i open a new web page.
    Any help or assistance in this matter would be very much appreciated.
    Russ

    You (or your kids) inadvertently installed adware. You do not need to download or install anything to fix it.
    Any tips on how to stop it from happening?
    Yes. To learn how to avoid it in the future read How to install adware.
    If you require them, Apple's removal instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

  • How to create a portlet for a new web page?

    I create a web page "A" in the remote server and have another page "B" which have a button in it. And when push the button in page "B", I want to use PRC to add a new portlet object linking to page "A" to portal. How should I do this?
    I know it's possible to add a new portlet template using IRemoteSession.GetPortletTemplateManager().CreatePortletTemplate(intparentFolderID, intwebServiceID), but how should I get the webServiceID while it haven't been created for the page "A". Must I create the web service in the portal server by hand? Is there any programmatic method to create a new web service by PRC? Or if there are some other methods to create a portlet for a new page without creating webservice, that would be a prefer.

    Hi Prateek,
    I Did the Things Which is Presented By Michal in This Blog.
    But When I Executed RZ70 With My Gateway Service as "sapgw01" And the Gateway Host As "Server Host Name".
    I Got the Error When I Click on "<b>start Data Collection"</b> After Execution of the Program As Follows
    <b>"Used RFC destination :SLD_NUC"</b>
    <b>"RFC call failed : Error opening an RFC connection"</b>
    <b>"Batch job not scheduled"</b>
    All Other Are Success Like Data Collection ......
    Please let me Know What to Do Now...
    Regards
    Khanna

  • When I click on a hyperlink it automatically opens it up in a PDF or in Adobe Acrobat Reader. How do I change my settings back to normal so when I click on the link it opens it up in a new web page?

    When I click on a hyperlink it automatically opens it up in a PDF or Adobe Acrobat. How do I change my settings so that when I click on a link it opens it up in a new web page like it is supposed to?

    Install this Add-on: https://addons.mozilla.org/en-US/firefox/addon/open-link-in-new-tab/

  • How to make Safari browser always open a new web page in a new Safari browser window which was clicked from a PDF document URL

    Hi
    I have a web application which would enable users to see a list of PDF document on the web page and when the user select the PDF document, it will be open by a adobe PDF view
    Within the content of the PDF document, it will contact URL links to some other portal web pages which we would like these other web pages to be open in a new browser window, but our testing shows that the new web pages may not always open in a new browser window.
    Could you help to advise how I can enforce that new web pages that are clicked from the PDF document can always be open in a new Safari browser window ?
    Thanks in advance.
    Regards
    Sen Lee 

    Hello,
    In order to change the default reader for PDF files (to not open PDF files with Firefox's internal PDF reader), follow these steps:
    #Go to ''Tools'' > ''Options'' (or ''Firefox'' > ''Options'').
    #In the Options window, select the ''Applications'' tab.
    #In the ''Search'' field, type ''PDF''. You should find ''Portable Document Format (PDF)''.
    #On the right handside you should find an ''Action'' column. Use that to select your favorite PDF reader. In order to view PDF files in Firefox, choose ''Preview in Firefox''.
    Did this fix your problems? Please report back to us!
    Thank you.

Maybe you are looking for