New westell 7500 Now computer no longer sleeps

Good day to all
I just got online with new Westell 7500 modem/router now HP Pavillion desk top computer
which has a  sleep button on keyboard will not stay in sleep mode.
There must be setting which I could change, I hope. If any one knows please share w/me
thanks
nedt
Solved!
Go to Solution.

Hi smith6612
Well it's the next an your information was right on. My slept all and never woke
again thank you so much
nedt

Similar Messages

  • I downloaded Yosemite on new iMac and now can no longer open spreadsheet files created using Excel for the iMac.  I used to be able to do so on this new computer.  What can I do?

    I downloaded Yosemite on my new iMac and now can no longer open spread sheet files I created on my old iMac using Excel for the iMac.  I used to be able to open these files on my new computer before Yosemite.

    I downloaded Yosemite on my new iMac and now can no longer open spread sheet files I created on my old iMac using Excel for the iMac.  I used to be able to open these files on my new computer before Yosemite.

  • Computer no longer Sleeping

    I have an iMac G5(2nd Gen) with Leopard (10.5.3) and my computer will not sleep no matter what I do. I tried ejecting all external drives (Firewire and USB), turning off all USB devices, disconnecting from my wireless network, quitting all running applications including ones running in the menu bar but it still will not sleep. It will sleep manually by going to Apple Menu-->Sleep but if I try to set it up to automatically sleep in Energy Saver it will not. I also did some research online and found that HamachiX is a known for this but I don't use that program. I use LogMeIn Free but I quit out of it for the past three days. If I look in my console logs it says this.
    Jun 21 10:11:24 The-Big-Green-Machine tuncfgd[7783]: tuncfg: already running, use 'killall tuncfg; tuncfg' to restart it
    Jun 21 10:11:24 The-Big-Green-Machine com.apple.launchd[1] (tuncfgd[7783]): Exited with exit code: 1
    Jun 21 10:11:24 The-Big-Green-Machine com.apple.launchd[1] (tuncfgd): Throttling respawn: Will start in 10 seconds
    Jun 21 10:11:34 The-Big-Green-Machine tuncfgd[7785]: tuncfg: already running, use 'killall tuncfg; tuncfg' to restart it
    Jun 21 10:11:34 The-Big-Green-Machine com.apple.launchd[1] (tuncfgd[7785]): Exited with exit code: 1
    Jun 21 10:11:34 The-Big-Green-Machine com.apple.launchd[1] (tuncfgd): Throttling respawn: Will start in 10 seconds
    Jun 21 10:11:44 The-Big-Green-Machine tuncfgd[7786]: tuncfg: already running, use 'killall tuncfg; tuncfg' to restart it
    Jun 21 10:11:44 The-Big-Green-Machine com.apple.launchd[1] (tuncfgd[7786]): Exited with exit code: 1
    Jun 21 10:11:44 The-Big-Green-Machine com.apple.launchd[1] (tuncfgd): Throttling respawn: Will start in 10 seconds
    Jun 21 10:11:54 The-Big-Green-Machine tuncfgd[7787]: tuncfg: already running, use 'killall tuncfg; tuncfg' to restart it
    Jun 21 10:11:54 The-Big-Green-Machine com.apple.launchd[1] (tuncfgd[7787]): Exited with exit code: 1
    Jun 21 10:11:54 The-Big-Green-Machine com.apple.launchd[1] (tuncfgd): Throttling respawn: Will start in 10 seconds
    Anybody have any idea what that means or why this occurring. Thanks in advance.
    Message was edited by: Krasi

    I tried what you suggested and even reset the PRAM to see if that would do anything and neither worked. I also turned off all screen savers, turned off bluetooth, disabled all startup items, and even tried a different partition i have with a clean install of 10.5.3 and that didn't sleep either. It it seeming to be more of a hardware issue but I am not sure. I went through and disconnected all my devices again just to try and still it fails to sleep even on the clean side where no apps are installed and nothing has been modified. My comp is out of warranty so if it is hardware I am stuck with it until I get a new machine. Anything else you can give me to try.

  • New Hardrive and now blank screen with sleep light on

    My warranty ran out on one of my mbp's, so I decided to install a new hardrive in one. I went through all the steps, and was very cautious. Now when I turn on the laptop the screen is blank and the sleep light stays on the entire time. I hear the cd-rom do some stuff but that's it. If anyone can help me figure out what happened it would be greatly appreciated.

    Well problem solved, had to apply some pressure on top of the case by the left i/o and next thing you know I hear the beautiful chime

  • Got a new hard drive now computer wont update my ipod

    I had to get a new hard drive and have managed to get all of my old music back into itunes but my computer does not read my ipod and has not updated the new music that I have purchased thru itunes or music I have downloaded from a disc since installing the new hard drive. I have re-installed my ipod software from the disc with no results.... HELP!!! My Mini now has no music on it because I reformatted it when prompted to do so when reinstalling the software... I am so frustrated, please advise???
    Gateway   Windows XP  

    I have to admit that your reply seems as though it would work, but I am not sure exactly what your reply means, can you respond to me like I am an idiot and spell it out for me??? I am having a great laugh at myself right now, but if you tell me exactly what to do, I am sure I can figure it out. I did put the disc that came with my mini, I even uninstalled itunes all together and reinstalled it but that did nothing to help the cause... still getting the same response that my software is not "installed properly"

  • Installed new bios and now computer won't boot

    I just installed the new bios for my  HP Pavilion dv6704nr Entertainment Notebook PC laptop off the hp website and now my computer won't boot.  I tried removing all power (including the 3 volt battery) and it still won't turn on.  I Then tried the windows + B keys at boot and still nothing.  I have windows7 64 bit OS and installed the vista 64 bit bios (the only 64 bit bios they had).  Any help would be greatly appreciated.
    Thanks

    try runnng system restore from recovery manager, if the OS is changed then run recovery
    ***Click on “Kudos” STAR to say thanks!***

  • Early 2008 MBP, replaced optical drive with SSD, now computer won't sleep.

    So pretty much you know everything already, installed the operating system on the SSD everything works fine except the computer wont sleep.
    Any help wouldbe great
    thanks

    I am about to do the same upgrade on MBP 13". Reading around the topic I think this problem is caused when the OS is running from the drive in the optical bay.
    See extract from following link:
    http://lifehacker.com/5541774/how-to-install-a-solid+state-drive-in-your-macbook
    Update: It seems that connecting the SSD to the optical drive slot will give you problems waking from sleep, since the MacBook doesn't look to that SATA port for your main drive. I did not notice this before, as I don't sleep my computer. So, instead of installing your SSD in the Optibay, you'll want to disconnect your regular hard drive, install the SSD in that slot, and then install your old drive in the Optibay and continue as written.

  • Acer Aspire m5-583p: I got the new windows update, now computer is stuck on the boot page. Help?

    The title says it all. Last night I got the update and it restarted and went to the "Acer 'explore beyond limits'" boot  page. After about an hour of looking at this I fell asleep. I woke up and it's still on the same page. Does anyone have this problem? 

    That is why you don't turn on automatic updates... Do you know the KB number of the update? If you do, then you can google KB###### Rescue Disk, and most likely you will be able to find a rescue disk Microsoft made to fix it. You could also try that old rescue disk for KB2 something that was from a year ago, I've used it a couple days ago to rescue a bricked system. Or you could try pressing ALT+F10 at the Acer Explore Beyond Limits screen (before the Windows boot thingie comes up) to enter recovery and then select Troubleshoot>Advanced Options>Command Prompt. Then follow the instructions: http://community.spiceworks.com/how_to/38624-uninstall-specific-windows-updates-via-cmd-or-batch-file-in-windows-7-8-and-server-2008-2012. But this only works if you know the KB number.   If you don't know the KB number try booting into Safe Mode (press ALT+F10 at POST, Troubleshoot, Advanced Options, Advanced Startup Settings, Press Restart, and then press the key 4 on your computer). From there you can uninstall the update and/or find the KB number. Please Kudo if this helped   

  • How to use a Westell 7500 as a router-switch ?

    I have an extra Verizon Westell 7500 DSL modem router (A90-750015-07). How do I turn it into a router-switch that will take an ethernet (not DSL) network feed (with internet access) and distribute it among a few devices and put those devices into some kind of sub-network so they see each other? I'm not using technical terms here - please teach me.
    My wife is going to rent a small temporary office that provides internet access via a socket in the wall. Let's assume it's a typical RJ-45 ethernet socket. The internet speed might actually be pretty good - maybe 30Mbs down and very fast up. The total internet capacity is shared with other temporary offices in the facility, but let's assume we'll have enough for our needs.
    If the only thing I bring is a single computer, I could use a J-45 ethernet cable to plug its network card directly into this socket and be done. But I'll be bringing at least two computers and a small printer/scanner. Both computers will need to share the internet access, and both computers and the printer/scanner will need to "see" each other. (Just like at home.)
    So, if I plug the extra Westell 7500 into the network wall socket and then my PCs and printer into the Westell, I should get what I need here, yes? How do I do this exactly, step-by-step?
    I have experimented at home and have maybe 10% success. At home, I don't have an ethernet socket in the wall, but I do have my current (not Westell) modem-router, and it has an unused LAN socket, which I am pretending is the office's ethernet socket. I connected a test computer to the Westell 7500 and logged onto the Westell 7500's embedded server (192.168.1.1), changed its VersaPort from "LAN ethernet port" to "WAN uplink port", connected the newer modem-router's unused LAN socket to the Westell 7500's E1/Uplink socket with a J45 cable, went to the Westell 7500's "Advanced" page and ran "Detect WAN Configuration". That changed the Westell 7500's "WAN uplink port Settings Protocal" from PPPoE to Routed IP. The Westell 7500 now also says its "Broadband Connection Type" is "Routed Bridge".
    The test computer connected to the Westell 7500 shows it is connected to the Westell 7500, but it cannot connect all the way through to the internet. At the start, the newer modem-router shows the Westell is connected to it, and the newer modem-router has given the Westell a DHCP address of 192.168.1.5. But after a few minutes, the newer modem-router doesn't show the Westell any more. If I re-run Detect WAN Configuration on the Westell 7500, it says "Automatic Protocol Detecion is in progress" but then "DHCP server was found ... PPPoE server not found", and then the newer modem-router shows the Westell 7500 again as 192.168.1.5. But the test computer does not have internet access.
    What exactly should I do with the additional settings in the Westell 7500 to make this work?
    If there's a great web site to explain this to me, please point me there.
    Thanks.

    The answer is at
    http://www.tomshardware.com/answers/id-1856344/convert-westell-7500-router-switch.html#11803251
    and the links in that post.

  • Can no longer access my itunes account because my riginal computer no longer works. Now need to access prepurchased apps to download on my Ipod since i had to reset it. I have a new laptop.

    Can no longer access my itunes account because my original computer no longer works. Now need to access prepurchased apps to download on my Ipod since i had to reset it. I have a new laptop.

    Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud, iTunes Match, and iTunes Radio availability by country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple recommends, "You always back up your iTunes library in the event that a purchased item is no longer available on the iTunes Store," (http://support.apple.com/kb/ht2519).
    You will be using your original AppleID and password.  that works for any computer you own now or in the future.  Do not make a new appleID.

  • TS2972 My computer crashed and the hard drive is no longer.  I have purchased a new laptop but now have no access to my old itunes library.  My laptop has created a new itunes account with NOTHING in it?? My Itouch has everything loaded but it wont sync

    My computer crashed and the hard drive is no longer.  I have purchased a new laptop but now have no access to my old itunes library.  My laptop has created a new itunes account with NOTHING in it?? My Itouch has everything loaded but it wont sync with this itunes account....HELP

    - Transfer iTunes purchases:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - Transfer other music by using a third-party program like one of those discussed here:
    newer copy
    - Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note that the iPod backup that iTunes makes does not included synced media like apps and music.

  • My ipod touch 2 no longer recognizes or syncs new playlists from my computer.  But it does takes the playlists from the ipod and syncs to the computer.  This is a reverse process - what am I doing wrong?  It always synced the correct way in the past.

    Why doesn't my ipod touch 2 recognize or sync new playlists from my computer?  It did in the past, but now the syncing process goes in reverse; the
    playlists on the ipod touch 2 sync to my computer!

    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod
    - Backup and then restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

  • I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I try to update, it pops up to say "These apps cannot be accepted by your apple id". Then will say "update unavailable with this apple id" how do i fix

    I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I first try to open it the pop us says: "You can't use this version of the application "iPhoto" with this version of OS X. Version: 9.2.1"  When I try to update, it pops up to say "These apps cannot be accepted by your apple id - These apps were already assigned to another Apple ID and they will be available in that Apple ID's purchases list.  If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the application".  I checked and there is nothing under the "purchases" in my App store.  Then will say "update unavailable with this apple id - This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canceled." Then the third pop up says "We could not complete your request. There was an error in the App Store.  Please try again".  Just want to know how do to fix.

    After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
    b0n0b0
    Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
    Mar 15, 2014 9:05 AM (in response to Terence Devlin)
    Got it! Thanx.  What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

  • HT4915 Since downloading the latest iTunes, I am unable to delete songs from my iPhone 4s and songs I have purchased on iTunes are not available on my iPhone 4s. My computer no longer seems to recognise my iPhone or iPad. How do I work the new iTunes plea

    I hate the new iTunes, I can't find anything and can't delete music from my iPhone4S. I can't find my iPhone or iPad when I plug them into my computer and I now have a whole lot of stuff I don't want on my phone. I have relaxation music on my iPad (for work) and other music on my iPhone. The new iTunes has now put everything on my iPhone and I can't get it off. I've disabled Match from my iPad to prevent the wrong music from appearing. Help please someone, I'm going insane.

    In iTunes go to View>Show Sidebar.  This will make it look and behave more like previous versions.  Then connect your phone, click on it's name on the left side, go to the Music tab and make sure you haven't selected Sync your entire library.  You may want to check the songs in your library that you want on your phone, then go to the Summary tab of your iTunes sync settings and select Sync only checked songs and videos, then click Apply at the bottom to sync your phone.  This should transfer only the checked songs and remove the rest.

Maybe you are looking for

  • Transportation taking lot of time

    Hi All ,            I have transport a request yesterday . But till today it is still running , nd taking very long time also not completed yet . Please anyone tell me what i will do ? In the log it is showing completed for 1) Selection for Import 2)

  • Extending my desktop across 2 (DVI) displays from 15" MacBook Pro Retina

    Hi. I bought a new 15" MacBook Pro Retina a few days ago and am trying to connect 2 Dell displays with a view to extending my desktop across them both. At the Apple shop I was told I simply needed to buy 2 Thunderbolt to DVI converters (my 2 displays

  • How do i group my contacts?

    I have google + groups but don't know how to change a contact to an established group.

  • Sender / Receiver on DEBMAS customer IDOCs mapped from XI

    Hello XI experts, I'm hoping you can help me resolve a question. In our system, customers are maintained in an AFS ERP system. They are then distributed to MDM, via XI, using DEBMDM messages. We have a second (Retail) ERP system that also needs the c

  • Error message unknown software exception

    Thunderbird doesn't open and I get this message "The exception unknown software exception (0x0000417) at location 0x78b2ae6e". How can I fix this? Can I just re-install Thunderbird? Thanks.