New which ports to use.

Hi
I was wondering which port to use, and how many are there, also would it be OK to set all programs with ANY port, or do certain programs need certain ports and are some faster than others?
George

Applications that communicate via system ports have that information embedded in the program. You should not make changes as this could cause applications to stop working properly.
If you are trying to protect your computer from outside access then use the built-in firewall via the Security preferences. Through the firewall you can specifically block ports from unauthorized access.
LittleSnitch is a diagnostic tool. It is intended mainly to allow programmers to monitor communication information in order to better design their programs. It also can be used to detect unauthorized access to the computer if it's believed that there is such activity and to find out from where the access has originated. It is not intended as a user application.

Similar Messages

How to identify Which ports are using in RAC setup?

Hi,
how to identify Which ports are using in RAC setup?
Thnaks,

[Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

Which ports are used by LMS 4.2.5 Software Center

Hi everybody!
we are trying to download device updates and packages via the software center of lms 4.2.5. but get the attached error msg.
Which ports are used for the download (for firewall configuration)
I can't find the used ports for this function in the install guide.....
I am very thankful for any suggestions!
Edit:
here is the log output:
[ Sun Jan 04 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Sun Jan 04 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Mon Jan 05 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Mon Jan 05 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
there is no proxy in use, so the is none configured :)

Hi,
Looks like you are encountering this BUG
CSCur85172    Unable to installing the device packages from cisco.com using LMS Server
Try this to resolve the issue::
Stop Daemon Manager
2.            Change the protocol 'http' to 'https' for the below URL's in vds.properties
file located under /NMSROOT/lib/classpath/com/cisco/nm/xms/vds/.
NGCcoScript=http://tools.cisco.com/software/catalog/swcs/softwaremetadata
NGCcoImageScript=http://tools.cisco.com/software/catalog/swcs/image
TO
NGCcoScript=https://tools.cisco.com/software/catalog/swcs/softwaremetadata
NGCcoImageScript=https://tools.cisco.com/software/catalog/swcs/image
3.            Start the Daemon Manager.
Thanks-
Afroz
****Ratings Encourages Contributors ****

Which ports are used by oracle datbase and management agent other than 1521

Hi,
Which ports are used by oracle datbase and management agent other than 1521 and the default port of management agent?
Regards,
Rjiv.

Check Port Numbers and Protocols of Oracle Components and also check your portlist.ini in $ORACLE_HOME/install directory.

Which ports oracle use for replication..

Hi All,
I want to know which ports orcale use for replication.plz reply me quickly.
Thanx in advance

This is configurable. By default, listeners will run on port 1521, but sites can specify multiple and/or different ports. Depending on the OS of the database, connections made on that initial port may be redirected to a different port (Windows) or may do all the communication on the listener port (Unix). Windows databases can be configured to do all communication on the listener port, though there may be a performance impact to doing so.
Justin

Which port is used by SCCM console??

which port is required by SCCM console to function properly .

list of ports is here:
http://technet.microsoft.com/en-us/library/bb632618.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Which port is using by RFC connection

Dear all,
Which TCP port is using by RFC connections? Port of GW?

RFC Destination
gsgfsgfsgf
Connection Type 3 ABAP Connection
De
Description 1   asdfasdf 001 for QA dfasdf Concession (Loadb
Description 2
Description 3
Load Balancing
Target System   HAS
Msg. Server
hasdgsd
Group
fdff
Save as
sdafsdf
Gateway Host
Gateway service

Which ports are used by XE

Hi,
right now I am testing XE on a fresh installed SuSE-10 machine without any firewall, because the machine has no connection to the internet. But when I start the firewall, which ports should I keep open for XE? Only 1521 and 8080 (when I accept the defaults during installation)???

It really depends on what you are trying to accomplish. Probably port 8080 ...
Understand that Oracle provides a listener that serves several functions, but is in essence the same as inetd ... the listener listens on behalf of services and then tells the service and the requestor to connect.
For the baseline database service, the listener watches on port 1521 for a network-based request. When received, the listener tells the database service and the requestor to 'go play elsewhere'. (This is not the case for a bequeath request - within the local machine - which is why "sqlplus / as sysdba" does not even need the listener up.)
If you plan on allowing Oracle Networking requests from other machines (Java, sqlplus, .Net, etc) you will need to allow ports other than 1521.
The listener also listens on one or more ports for the Enterprise PL/SQL Gateway that provides http, ftp and OraDAV access. The default for this in XE is port 8080, although you can change that by calling the appropriate procedure [dbms_xdb.sethttpport(8080)]
If you plan on supporting HTMLDB connections, opening 8080 (or whatever you set) is required.
On my machine, using the lsof command, I note that
- when the listener is down, the database has one socket open looking for listener
- when listener is up, a port is assigned, presumably for the DB<->listener communication
.... this results in two handles on the selected, but random, port
- making an http htmldb request to login page opens the http-alt (8080) port
.... if from a local browser, it results in 2 handles
.... if from a remote browser, it results in one handle on the XE machine
- logging in releases that port
- making a SQLPlus connection opens a random port
.... if from a local host, results in two handles
.... if from a remote host, results in one handle.
The following lsof has:
- 1 local & 1 remote sqlnet, both using TCP
- 1 local sqlnet using bequeath
- 1 local HTTP access
- listener is up
host:/home/pop2 # lsof -T s -i 4TCP -a -u oraclexe
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
oracle 4343 oraclexe 120u IPv4 387830 TCP host.domain.ca:7896->host.domain.ca:ncube-lm (ESTABLISHED)
oracle 4366 oraclexe 15u IPv4 385934 TCP *:exosee (LISTEN)
oracle 4366 oraclexe 16u IPv4 451366 TCP host.domain.ca:http-alt->host.domain.ca:msi-selectplay (ESTABLISHED)
tnslsnr 4457 oraclexe 8u IPv4 386930 TCP *:ncube-lm (LISTEN)
tnslsnr 4457 oraclexe 11u IPv4 387831 TCP host.domain.ca:ncube-lm->host.domain.ca:7896 (ESTABLISHED)
tnslsnr 4457 oraclexe 12u IPv4 387832 TCP *:http-alt (LISTEN)
tnslsnr 4457 oraclexe 13u IPv4 387833 TCP *:amiganetfs (LISTEN)
oracle 14917 oraclexe 14u IPv4 444576 TCP host.domain.ca:ncube-lm->mini.domain.ca:16815 (ESTABLISHED)
sqlplus 15252 oraclexe 8u IPv4 447190 TCP host.domain.ca:15200->host.domain.ca:ncube-lm (ESTABLISHED)
oracle 15257 oraclexe 14u IPv4 447191 TCP host.domain.ca:ncube-lm->host.domain.ca:15200 (ESTABLISHED)

Which ports PI uses?

Hi experts!
In my work the IT people want to put a firewall and I want to know wich ports PI uses, like 21 for FTP, 80 for HTTP, etc..
Do you know wich port need to be open?
Thanks in advance!!

Hi Matias Peralta,
Based on your request I understand that you organization going to setup a firewall and you can expose some ports like 433, 4022 etc as per availability to Trading partners.
Port mapping should be done in thefirewall configuration as your web dispatcher port(This information can be obtained from your basis team / will be managed at the installation time / netweaver administration.)
80* series is for ABAP ports and 50* series i sfor JAVA port.
PI ports
The ports are created from 50000100*instance_number20n*5port_index, where n is the number of server elements from 0 to 15 and port_index is from 0 to 4.
Note: Good practice is not to expose actuall ports to trading partners due to security reason.
Thanks & Regards
Harsha Paruchuri

Which Ports to use?

I am kinda new to skype and don't know a lot about it. So i was just going through the options and stuffs ...and under the ''Advanced'' tab there's ''connection''..and it has a lot of options.. like ''use port ..for incoming connections'' ''enable upnp''. So can someone please help me what to do with these options or should i just keep them the way they are? And if i modify these ...will my skype video calls become faster? As sometimes, my video calls lags. So i'm just looking for ways to make it faster by modifying some skype options maybe? Like if i change the port to some other numbers..will it make my calls faster? Or should i check/uncheck the upnp thing? PS. I have a very fast internet. So i want skype to use the most of it.

Applications that communicate via system ports have that information embedded in the program. You should not make changes as this could cause applications to stop working properly.
If you are trying to protect your computer from outside access then use the built-in firewall via the Security preferences. Through the firewall you can specifically block ports from unauthorized access.
LittleSnitch is a diagnostic tool. It is intended mainly to allow programmers to monitor communication information in order to better design their programs. It also can be used to detect unauthorized access to the computer if it's believed that there is such activity and to find out from where the access has originated. It is not intended as a user application.

Which port to use for the peer-keep alive

Hi All,
We have 2 Nexus 6001s in our data center.
The management port of each 6001 is connected to the other and this link is used as the peer keep alive link.
My colleague is suggesting that we use one of the inline data ports as the keep alive link.
Can you please advise on the pros and cons of using management/inline port as keep live link and the best practise to follow in this case?
Thanks,
Pete

Hi Pete,
Here are the best recommendation in order of preference.
1. Use mgmt0 (along with management traffic)
* Pros: whats good on this option is you are totally separating the VPC Peer keepalive link on another VRF (management) and does not mingle with the data or global vrf..
* Cons: VPC PKL is dependent on the OOB management switch.
2. Use dedicated 1G/10GE front panel ports.
* Pros - can just be a direct link between the N6K pair and not dependent on other boxes.
* Cons - you need extra SFPs for VPC PKL while the VPC PKL traffic join the global VRF.
HTH
Jay Ocampo

Which port uses aerender?

Hi there,
I have following problem. Since I installed the avast (antivirus/firewall) update 2014.9.0.2008, my BG Renderer script, respectively the aerender, won´t start to render anymore. I tried it with After Effects CC and CS6 with the newest and older versions of BG Renderer script.
Lloyd Alvarez told me (after I send him two screenshots), that avast blocks the port aerender uses. The error is coming from aerender not BG Renderer. As long as I stop the firewall, all works fine.
Here my question:
Does anybody know which port aerender uses?
Thanks in advance,
Rodrigo

Hi Todd,
thanks for your response.
Yes, the new avast version causes lots of problems. On an other machine, the 3ds max backburner won´t render with avast anymore, too.
Anyway, the easiest way for me would be to 'unblock' the portnumber for aerender. Does a portnumber defined for aerender exist?
If not, I will follow your advice.
Cheers,
Rodrigo

Which port number to use in remote site definition? [was:Help!]

I recently upgraded from Dreamweaver 8 to Dreamweaver cs6. I'm having trouble accessing my website because I dont know which port to choose. I never had to choose a port in Dreamweaver 8. How does one decide which port to use? Do you just keep picking random numbers until you get one that works?

Generally, the port next to your FTP address in the site definition will be 21 by default.
If that isn't working, you'll need to contact your hosting company to see if they use something else.

Re:Which port does the copy file function use?

Hi ,
How does the Copy File Function work?
Which port is used?
My problem is … When user copies the large request output file, the network is slow. So I want to manage bandwidth such as using Qos .
Regards .

Hi hussein ,
Please find the details
1)Please post the details of the application release, database version and OS .
App Release: 11.5.10.2
DB Version: 10.2.0.4
IBM AIX on POWER Systems (32-bit)
2)How does the Copy File Function work?
What copy file function you are referring to? Please post the navigation path.
1. Submit Request
2. View Output File
3. Tools --> Copy File
3)Which port is used?
My problem is … When user copies the large request output file, the network is slow. So I want to manage bandwidth such as using Qos .
How are you planning to manage the bandwidth of specific port?
If I know which port is used, I can manage it (give it to low priority)
Regards .

Which port do we use?

Hi,
a consultant is setting up a firewall on our servers, and he
asked me which ports coldfusion uses. The server is a standard
installation of coldfusion 7 on a windows 2003 server, and uses
- web services
- cfhttp
- standard web pages (cfm and html)
Which ports should be kept open for this to work
correctly?

Well, he probably already knows the ports for the services
you just mentioned. (Port 80 for http:, etc.)
You may also want to consider port 25 (if you will user the
cfmail function, for outgoing smtp mail).
One other note - if you are having problems running the
ColdFusion Administrator, you could add port 8000 PLUS go into the
IIS Manager, right click on the website you will be running
ColdFusion on, and click on "Properties".
Choose the "Website" tab and click "Advanced".
Under "Multiple Identies for This Website", have your
consultant click "Add", the add the IP Address (or All UnAssigned),
Port 80, and "Host Header Value" of 127.0.0.1.
I hope this helps!

New which ports to use.

Similar Messages

Maybe you are looking for