New widows 7 install on amd phenomx6 64 bit firefox 3.6 crashes as soon as it is started also will not start in safe mode it crashes before it starts. it will run when windows is in safe mode
this is a brand new system from zt systems. it came with almost no software installed. no toolbars or anything, only trial of microsoft office.
I don't think that it even generates a crash report.
Can you provide me with your Crash ID? See https://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it#Getting_your_crash_report . Please post them here
Your crash ID is after ''bp''
'''Crash troubleshooting'''
<u>Add-ons</u>
One of your add-ons might be the culprit. Try running Firefox in [[Safe Mode]] with all add-ons disabled. If that solves the problem, see [[Troubleshooting extensions and themes]] and possibly [[Troubleshooting plugins]]
<u>Are your plugins updated?</u>
Check this by going to http://www.mozilla.com/en-US/plugincheck/
<u>Are you using the newest version of Firefox?</u>
It is important you use the latest version of Firefox because it includes stability and security updates. The latest version of Firefox can always be downloaded from http://www.getfirefox.com. You can check if you are using the latest version of Firefox by going to Help | About Mozilla Firefox. If you are not, see [[Updating Firefox]]
<u>Malware</u>
Different types of Malware can cause Firefox to crash. For more information, please see [[Is my Firefox problem a result of malware]]
Similar Messages
-
My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?
I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it. -
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
How to tell embedded jinitator applet is still running when window closed
Hello, we are trying to accomplish the same thing that is mentioned in this post from Metalink. I've searched for a solution and hope someone here can help. Instead of restating the issue I think David Wilson does a good job of explaining what is needed. Can anyone please suggest a possible solution?
From: David Wilton 07-Oct-05 01:08
Subject: How to tell embedded jinitator applet is still running when window closed
How to tell embedded jinitator applet is still running when window closed
Hi,
We run an oracle 10g forms application through 9iAS over an intranet. All users are running windows 2000 professional.
We run separate frame = true but I would like to switch to separate frame = false
With separate frame = true if the user clicks the outer windows "X" close button (forms mdi window) the user is prompted to save changes before the application ends.
BUT
when using separate frame = false
If the user clicks the upper window "X" button (no longer form mdi window but regular browser window) the window and application is abruptly closed.
I'm interested in using a onbeforeunload function to confirm if the user wants to close the window. This would be placed in the basejini.htm file. This could always ask if the user wants to exit or not. If they click OK then the window closes but if they click "Cancel" you are returned to the forms application exactly where you left. something like event.returnvalue="do you really want to exit?";
However if the user exited using the normal exit form method then the applet is already closed before the onbeforeunoad event fires and there is nothing to go back to and I want the window to close automatically. This is accomplished using close.html file in post forms trigger.
So what I want and what I think many may also want is the check if the embedded applet is still running and if so prompt the user to return to the application or continue to close. Of course If the applet is no longer running then just close because there is no reason confirm closing anymore.
Does anyone have a html/JavaScript solution that can be placed in the jinitiator.htm file? or similar?
Thank you
David
[email protected]
From: Andrew Lenton 07-Oct-05 08:58
Subject: Re : How to tell embedded jinitator applet is still running when window closed
I don't know if this is exactly what you are after but you can add the following to the top of your basejini.htm file and it should prompt the user before exiting the IE window.
<BODY %HTMLbodyAttrs%>
%HTMLbeforeForm%
<SCRIPT>
<!--
window.onbeforeunload = unloadApplet;
function unloadApplet(){
message = "Warning! Please exit the Java Applet prior to
exiting the browser"
return message;
//-->
</SCRIPT>
From: Oracle, mohammed pasha 07-Oct-05 09:55
Subject: Re : How to tell embedded jinitator applet is still running when window closed
David,
Well I could not understand your complete requirement.
Refer to Note.201481.1 How to Close the Browser Window When Closing Forms And How to Simulate SeparateFrame By Javascript
Note.115905.1 How to Close Browser Window When Closing Webforms Applet
Kind Regards,
Anwar
From: David Wilton 07-Oct-05 14:37
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Thank you for your reply and yes you did not understand my question fully.
Sorry if this is a long reply
I am able to close the browser window using information in notes 115905.1 and 201481.1, this is not the issue. We implemented this several years ago. It is workable for both separate frame = true or false.
It is most important to not allow the user to end their forms application by closing the windows browser, they must close using normal form exit commands.
What I want is to have separate frame = false, the big drawback to this option is the user can exit the application and bypass all forms code by pressing the windows "X" close button. This is why we need the code as just provided by Andrew Lenton above in this thread.
BUT Andrew's code will always prompt the user before closing the window and I do not want that. I want the user to be prompted only under scenario 2 listed below.
Here's the 2 case scenario for exiting the application.
1. If the user closes properly and uses exit form which fires all normal form triggers including post_form with it's call to close.html file.
All uncommitted changes are saved or rollback and the users session is ended normally both on the database and in the application server.
All browser windows will close, great all is good. And without Andrew's code the window will close but with Andrew's code the user will be prompted to close or not, if they select Cancel the window will remain but the applet has already ended so why prompt? ...This is what I want to avoid.
2. In the forms app. if the user clicks the windows "X" close button with uncommitted changes. The browser just closes the changes are rollback without prompting the user to save. The users sessions are now lost and still running in the database and application server until they are timed out.
If I use Andrew's code then the user will be prompted to continue to close or go back, if they click Cancel to go back then focus returns to the forms application and the user can continue to work. If the user clicks OK then the window closes and unfortunately their sessions are still lost until timed out.
So what I desire is to add to Andrew's code to check if the embedded applet is still running and prompt the user to close or not accordingly.
Something like:
Basejini.htm like
</HEAD>
<SCRIPT LANGUAGE="JavaScript">
function maximizeWindow()
window.moveTo(0,0);
window.resizeTo(screen.availWidth,screen.availHeight);
function confirm(){
If(document.embeddedapplet.closed())
Win.opener = self;
win.close();
Else if
event.returnValue = "Closing Forms Application. OK to continue?";
</SCRIPT>
<BODY %HTMLbodyAttrs%, onload="maximizeWindow()", onbeforeunload="confirm()">
%HTMLbeforeForm%
I hope this explains my requirements.
David
From: Oracle, Evelene Raechel 10-Oct-05 06:45
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Hi,
Note.199928.1 How to Alert User on Closing Client's Browser Window in Webforms
Regards,
Rachel
From: David Wilton 11-Oct-05 17:40
Subject: Re : How to tell embedded jinitator applet is still running when window closed
I'm sorry this is not helpful at all.
Note 199928.1 is only an alert which does not stop the closing of the window and still displays as an alert if the user does close properly using exit form ... so why would you want to display the alert then?
This is exaclty what I do not want and why I want to determine if the applet is still running before displaying any kind of message.
David
From: Oracle, Evelene Raechel 17-Oct-05 12:23
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Closing thread.
Thanks,Hello,
I had the same issue last year - wanting to provide a warning on closing the browser, but only if the Forms session is still running. The approach I took is described below, see also the thread where I originally posted this at Closing brower window
Hi there,I've had a similar requirement - or rather, the two conflicting requirements: to warn when the browser is being closed, but for the app to be able to close the browser without a warning being fired.
To always provide a warning when someone (the user or the Forms app) tries to go to a different page (e.g. your close.htm), use Javascript like:
function confirmExit(){
if(appletRunning==true) {
msg="Closing this window or navigating to another page will end your SomeGreatApp session.";
window.event.returnValue=msg;
And make a call to confirmExit() in the onBeforeUnload event of your main page.
You'll notice I first check an 'appletRunning' variable before displaying the warning. This Javascript variable is set to true by my app when it starts up, using an embedded Javabean that calls out to Javascript. Once that variable is set to true, then the warning will be displayed if the user tries to shut the browser by clicking on the 'x' button, or to go to a different URL.
When my app is shutting down, it uses the same Javabean to set appletRunning back to false. It then navigates to a close.htm - which will be done without a warning being displayed.
See Re: How can a Javabean call Javascript function of the basejpi.html?? for example code on how to call Javascript from a bean embedded in your Forms app.
Hope these ideas help you out, it's worked for me (so far, anyway!!)
James -
I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.
Are there any previous networks that you have used that have the same password as Molly? YES
Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
Delete any other networks that you no longer need so that your Mac will search for networks more quickly
Click OK, then click Apply
Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
Then look for any old networks that might have used the name Molly in the past and do the same for them.
Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
and then click KeyChain First Aid
Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
Quit Keychain Access
Power down the entire network...all devices...order is not important
Power up the modem first, then your main router, the other devices one at a time
Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system. -
Hello, i just downloaded the itunes 11.0 with the completely new widow format. Mow do I drag songs and playlists onto my ipod? I see where my ipod is on the upper right side of screen but it will not accept any drops. Please help. thanks
Not only this but I can't drag from Itunes and place anywhere on my desktop or onto an external drive. Apple, why are you screwing around with basic functions!? I'm a dj and I need to be able to manage my music files without you ruining my life! FIX THIS!
Message was edited by: wheelo007 -
I uninstalled Beta 4 and re-installed 3.6.13 now Firefox will not open at all I tried to uninstall to start again but it will not uninstall either it does nothing, I have been using Firefox for a long time but cannot resolve this problem can anyone help and give me a solution please. As I use Firefox as my web browser it is very frustrating.
The fact it will not uninstall appears to be something completely new as nobody I know who uses Firefox has ever encountered this in the past.Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
If necessary then also see:
* http://kb.mozillazine.org/Browser_will_not_start_up
* http://kb.mozillazine.org/Error_loading_websites -
My ipod touch 5th gen will not connect to itunes, but my computer registers my ipod. i have tried placing my ipod in recovery mode, uninstalled and reinstalled itunes, and restarted my laptop but my ipod will not connect to my itunes..... help ._.
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
Yosemite will not upload on my MacPro, says I have to verify or repair, but when I do - it fails on that too. Am now stuck with a computer that doesn't work ! Have I lost everything ?
Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I talk by phone headset
Hi! I have the same problem when I use my headphones .
iPhone 4s England, iOS 6.1.2 -
Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?
If you think you're insane now, try maintaining those pop up menus.
As far as I know, these menus have not been updated since FW 8, so
they are at least two versions old.
Save yourself a lot of grief by avoiding those menus. There are many
other products on the market which do a much better job of creating
and maintaining this type of navigation structure.
Read this link before you climb any higher on this slippery slope:
http://apptools.com/rants/jsmenu.php
There was another blog post by the fellow who originally wrote the pop
up menu feature, but I can't seem to locate it. Even he says stay away
from them.
Not the answer you probably want, but I hope it helps, nonetheless.
Jim Babbage -
The screen to my phone will not turn on at all. I could hear the sound it makes when I do press on the home button. But the screen is not and will not respond and turn on. I plugged it in the charger to see if it'll do anything, but that didnt do anything. So I plugged it in the charger to my computer and even that didnt help with the situation. So how can I get my screen to turn on?
See Here for > Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Disk utility will not boot using COMMAND R. It won't give me the 'ERASE' option when I open Disk Utility. How do I wipe my hard drive?
If you're truly running 10.6.8, there is no Recovery partition - that didn't come along until 10.7x.
You'll need to use the set of gray discs that originally shipped with your model. If you don't have them, you can always get your serial number from the bottom of the casing and call Apple to get a set of replacement discs. These will run you about $20 + shipping & taxes. Once you have the discs, boot from Disk One and use Disk Utility to erase your HD and then reinstall whichever version of OS X that shipped with your model. No way around of getting the discs.
Clinton -
t will not let me change my credit card info keeps saying invalid security code when its correct
See here https://discussions.apple.com/message/19916952#19916952
-
wi-fi is gray will not connect since ios7.03, worked fine before this version...now slow, very slow, using nothing but 4g, no wi-fi no solution from apple store but to purchase a new Iphone....other 4s phone purchased at same time connects via wi-fi what gives?
Also reloaded per Apple instructions via web, Apple stores only solution "purchase a new phone", no attempt to fix problem.https://discussions.apple.com/thread/5554599?tstart=0
Maybe you are looking for
-
An error occurred when I tried to burn a disc image of a DVD slideshow. The slideshow has 324 slides in it and is almost 38 minutes long at the moment. I have added sound by creating a sound track in iMovie using a combination of songs downloaded fro
-
The power cord to my MacBook is blinking red? It was fine a min ago.
My laptop went blank. I know I was low on battery but not sure how low at that point. I also had my iPhone charger plugged into the USB port. I'm wondering if that has something to do with it? The charger I thought was apple but appears to be one tha
-
Schema Group for Local & Import for RFQ, Contract, PO
Hi, I would like to create two schema for Local & Import for RFQ, Contact and PO. I have customized the schema as per my own requirement, it is working fine in PO RFQ but in Contract the same Schema is not appearing when i am trying to maintained hea
-
IDVD unexpectedly quits after clicking "Save as Disc Image"
I want to author and burn a DVD, but my iBook doesn't have a DVD-burner. Unfortunately iDVD 5 (or 5.0.1 build 26) quits unexpectedly after I click "Save as Disc Image". The system offers me to send a report to Apple which I have done a dozen of times
-
How do i change hard drives in my envy 17
So finally get my new laptop for work, first thing made image of drive and cloned drive to 2 separate drives, 1 drive to stash for emergency use second drive an SSD to replace 1 TB drive. Low and behold new HP Envy cant simply pull old (new) drive ou