New Wifi NIC card not supported

So I have a DV4 4141us and I wanted to upgrade the wifi card to something that supports AC. So I bought an Intel AC wifi card that people said gave them good speeds. It was cheap and that makes me happy. I go to install it and Im getting an error 702. Im thinking maybe a BIOS update will help me out but all the changelog says about that is better memory management. Im wanting to know if there is a way I can install this bad boy wifi card. I would really hate to think Im screwed out of 802.11AC support. The model of the NIC is 7260HMW. Thanks.

Some people have had success with that module on some notebooks and many have not.
Did you install the driver from Intel?
Check the BIOS mod websites. You may be able to get a modified BIOS that suports the WIFIO module if you are willing to forgo your notebook's warranty to try to use the WIFI module.
Don't forget that once you go down the modified BIOS route you are on your own. You will have accepted complete responsibility for possibly making a brick out of your notebook by installing and using modified firmware.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

I installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

i installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

That message occurs when updating a phone that was hacked to be used with your network. Upgrading the phone has re-locked it to it's rightful carrier. You will need a SIM from the original carrier to proceed.

I put a Tesco sim (02 carrier) in 2 unlocked phones, Both phones are now locked to 02, 02 blame apple, I connect the iphone to itunes and it states that the new carrier (orange) is not supported

I put a Tesco sim (02 carrier) in 2 unlocked phones, Both phones are now locked to 02, 02 blame apple, I connect the iphone to itunes and it states that the new carrier (orange) is not supported, Isk this of both 02 and apple, who's phone is this and what right do you have to lock a previously unlocked phone? very angry

Where did you get these phones?
These and other forums are full of people with iPhone unlocking problems - the net result is that, as others have said, is:
If you bought them from Apple they will be (and stay) unlocked.
If you bought them PAYG from CPW then they will lock to the first SIM activated.
Any other contract or PAYG phone iPhone bought from the networks WILL be locked by them too.
However, all is not lost. The original purchaser can request for the phones to be unlocked by Apple, via the carrier. The carriers usually charge around £20 to do this, or gratis if you're out of contract.
You are the original purchaser, right? If not, you need to get in touch with that person and pray they'll help you out.

Is there an easy way to switch from Entourage (MS Office email) to Apple email? The new MS Office does not support Entourage.

I am looking for a way to shift from Entourage (MS Office email) to the Apple system for email? The new MS Office does not support Entourage.

Philip if you can't find your answer in this forum try the Snow Leopard forum, Mail is considered part of OS X so you may have luck there.
Also you also may want ot be more specific when posting. I'm assuming because you only mention Mail all you are interested in is switching to Mail or did you have more in mind?

Sim card not supported after unlock iphone 5c

iphone 5c, 12.7 GB, version 8.1.1, after unlocking when i connect it to itunes w/ other sim, sim card not supported error registered,. i check it to IMEI and its unlock, but why icant use it? I try to restore to itunes and erase my iphone nothing works, what can i do?

How was the phone unlocked? Was it unlocked by your previous carrier? The only way to unlock your phone is to have your previous carrier unlock it for you.
If you phone was unlocked in any other way, this constitutes hacking or jailbreaking and your phone will not work with another sim card.
Get the phone unlocked properly by your carrier and there is no reason why it should not work.

I phone blocked! Sim card not supported!

I phone blocked! Sim card not supported!
Recently bought an Iphone here in the Republic of Congo for about $600 and it was working fine until an update on Itunes. Now the phone just shows a USB cable and I tunes logo. When I connect the phone to Itunes it wants to restore and update, but then just blocks the phone again.

Who did you by the phone from? Apple? A telecom company? Ebay?
The phone was most likely jailbroken and unlocked. Applying the latest firmware updated undid that.
A

1st think my billing info is not support debit card not support by apple 2nd think is my old I'd is not working even free app in app store......

1st think my billing info is not support debit card not support by apple 2nd think is my old I'd is not working even free app in app store......

1st think my billing info is not support debit card not support by apple 2nd think is my old I'd is not working even free app in app store......

Tungsten E2: WiFi card "not supported"

I recently updated my Tungsten E2 with the most recent version of the WiFi software from the Palm Website. No problems with installation, but turning the WiFi on in my settings menu gives me an error message stating "The card in the SIDO slot is not a palmOne supported WiFi card." Pretty sure the card is a Palm card. Any ideas out there? I noticed a similar thread asking this question, but it was about 3 years ago, and no answers were received other than a suggestion to do a soft reset, which I did without success.
Thanks in advance for the help!!
Post relates to: Tungsten E2

I haven't read the instructions for installing the updated Wi-Fi card driver, but did you delete the old one first before installing the new one?
What I'd try next (only once you have a current backup via Hotsync) is a Hard Reset. BEFORE you Hotsync your stuff back to the E2, go through the diagnostic process of renaming the Backup folder on your desktop...this will allow your regular PIM data to return, but nothing else. Your Backup folder is located on this path:
(using Palm Desktop 4.x):
c > program files > palm (or palmone) > [your device folder, usually an abbreviation of your Palm's name, or perhaps a combination of your initials, etc.] > backup
(using Palm Desktop 6.2.2):
my documents > palm OS desktop > [your device folder] > backup
After you do this, go ahead and Hotsync. Then, reinstall ONLY the new Wi-Fi card driver. You should be able to just double-click on the .prc file from the renamed "backupold" folder. If it works, then reinstall your other apps one at a time. If it doesn't, then I dunno...maybe root around for the original driver and reinstall that? If you don't have the original disc, maybe you'll find it in the Backup or the Archive folder on your desktop.
Good luck, let us know how it goes.
Message Edited by smkranz on 01-08-2010 01:36 PM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

3GS iOS4.1 new sim card not supported

Hi guys, I own a PAYG iPhone that was bought direct from apple. I have been using it on O2 for the last year but I have just signed up for a Vodafone contract. I received my new sim card and put it in, it now goes to the emergancy calls pages and itunes says that the sim card is not supported.
The phone has never been jailbroken or anything in anyway. I have tried restoring the phone and this has made no difference.
Tried the sim in another phone and it worked fine.
Any ideas?

Doesn't sound like it.
I would contact O2 to determine if your pay-as-you-go iPhone that was used with O2 over the last year is carrier locked with O2. If the iPhone is carrier locked with O2, it will be up to O2 to unlock the iPhone.
If you specially requested an unlocked iPhone when purchased from the Apple store which is the most expensive, you need to contact the Apple store.

IP Failover between nic cards, not servers

This maybe a very simple question, I just haven't found the answer to it...
Our Xserve's are running on a Cisco switch and a switch port for the primary NIC card of one AFP server recently failed.
While the server had both cards connected to the switch and the second NIC card was live, the users lost connectivity to the internal server address (internal DNS) as is was pointing only to the primary IP address of that server.
This makes sense as there was no mechanism to tell the server to start using the secondary IP address.
We are now planning to connect all secondary NIC's to a second switch for both the LAN and the DMZ (VLANs) for better redundancy.
The DMZ uses IP addresses only due to port forwarding.
My question is now what is the best way to continue services on a secondary NIC if the first NIC fails.
Add a new DNS entry for the LAN? If so, how? Just enter the secondary NIC IP with the same server name?
Use FAILOVERBCASTIPS for the DMZ?
IP Failover works great between machines, but can the server send heartbeat messages to itself (example: FAILOVERBCASTIPS="NIC1-IP NIC2-IP")?
Is there any way to maintain the mount status of AFP volumes during the switch of IP's (since it's still the same machine)?
Thanks in advance for your help!
Xserve G5 Mac OS X (10.4.3)

Since you're using Cisco switches and are already familiar with VLANs, your simplest solution would be to use link aggregation to create a trunk between the Mac and the switch using both the NICs, then configure VLANs so that both subnets use the trunk interface rather than the physical interfaces.
That way traffic for either IP address can traverse either NIC, and you get automatic failover (thanks to link aggregation) should either NIC fail.
Note that this will only work if you're connecting to the same switch. If you have 'internal' and 'external' switches this won't work without some re-architecting of the network topology.

Graphics card not supported - GMA X3100

I've replaced a Macbook 2.0GHz from 2006 with 64MB shared video memory with a brand new 2.2 GHz with 144MB shared video memory. But when I start MainStage, I get the message that my graphics card is not supported.
Any idea why is that?
I haven't done any updates. Would that do it?
Thanks.

Thanks Blueberry

SIM card not supported

Hi, i forgot my passcode for my iphone 4 and restored the phone to factory settings and it updated itself to ios5, but now the phone says that the sim card is not supported. what should i do? I've tried with other sim cards and got the same error. Now the phone cannot be activated

Ok, here we go with a solution from the Official Apple Website. Test it after each step.
Reseat the SIM card: Remove the SIM card in your iPhone and then reinsert it.
Restore your iPhone. Note that the computer you are using to restore the iPhone needs to be connected to the Internet. You can verify the connection by loading the first page of the iTunes Store.
Contact your carrier to verify that the unlock was applied in their system.

SIM Card Not Supported. Never Hacked iPhone Bought From Apple Store!

My 3GS was stolen yesterday. I have my never hacked iPhone 2G that I wanted to re-activate so I went down to the ATT store and they gave me a new sim to put in and activate. iTunes says that the SIM is not supported. Went back and tried another SIM and no luck. After 2 hours at the store still no working phone.
I never hacked the phone, just always updated it with the latest apple software. It sat in a drawer for a year now until my 3GS was stolen. Restore didn't help.
ANY IDEAS?

Mmmm...the sim you're trying to use is activated, correct? If so, try this:
See if you can force the phone into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. You, of course, would chose "new".

IPhone 4 Sim Card not supported Help!

I bought an iPhone 4 off someone under the impression that it was UNLOCKED due to the fact that is had no Network on the box (unlike other iPhones i've had)
but when taking my o2 Sim out of 1 iPhone and putting it into my newer one, iTunes was saying that the Sim was not supported,
so im obviously guessing that the iPhone is actually locked to a Network....
I tried Googling the Part/Serial Number and Vodafone kept getting mentioned so might it be locked on the Vodafone Network?
(MC604B/A)
Any help with this would be appreciated!!
I need to get this sorted asap and need my o2 Sim working in my newer iPhone before my older one has sold (on eBay)
I purchased a Vodafone MicroSim just incase i'll need 1 for whatever reason..
but is there any other way or anyone else I can talk to to get this newer iPhone accepting my o2 Sim?
I cant get onto the iPhone at all as it stays on the main emergency call page as it isn't activated!
Thanks.

One of the big downfalls of purchasing an iPhone from a non-official source is a mess like this. Only the carrier that an iPhone is locked to can authorize the phone's official unlocking. Just about every carrier that unlocks iPhones will only do so for users active on their network. Thus, you're gonna have to establish service with the carrier this phone is locked to(after verifying they offer unlocking), then request they unlock your phone.

SIM card not supported after upgrade OS

I bought iPhone in Hongkong & use it in Jakarta. Originally iPhone worked well with SIM card of Telkomsel/XL, but few days ago I downloaded & installed upgraded OS ver 1.1.4.7 from internet and the result is my iPhone cannot work since the SIM Card is not supported anymore. pls help me resolve this.
Djend

All the iPhones sold in Hong Kong are hacked. Once you done the Restore, it would loss the unlock SIM function.
Hope the iPhones can officically launched early in Asia.
Message was edited by: Mitch 751

New Wifi NIC card not supported

Similar Messages

Maybe you are looking for