New Window 7 download-2 side printer not working.

My computer has been upgraded with Window 7 software. I was able select  2 side printing under the Micosoft XP software. Now when I select print and go to Printer Properties, I am only allow select Print on Both Side (Manually). This will be time consuming when I have to print presentations.
How can I get back to the original Print Properties that has 2 side print selection?

In the future please read this post then provide some details in your post such as  - what printer?
Most likely the issue is that the duplexer has not been enabled, you can address this as described in the Vista/Windows 7 Duplex Printing Troubleshooting Guide.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Both side print not working in network using windows 7

                               I have HP laserjet 1018 printer,Printer connected in windows 7 system.
              When i print both side print in same system is work done,but in network not work both side print,single print work good.i need help to solve this

    Hi Dinesh_G,
    Sorry for the delayed response.  Try adding an alternate driver.  Here is a link that will provide steps for that.  Click Here  Check which PCL driver you are currently using and add the alternate (PCL5/PCL6).  Please see the below for additional clarification.
    Utilize the above link for exact steps on adding the driver.
    1. Check which driver currently used-PCL5 or PCL6-this will be located near name of driver in print folder or print properties
    2. Follow steps provided in link to add whichever one the currently installed driver is using
         A.  Select HP as manufactuer
         B.  Select HP universal printing PCL 6 or HP universal printing PCL 5
    3. Attempt duplex print job
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

  • Hello, Trying to reinstall AdOn Video Download Helper on new Windows 8 OS. Does not work anymore. No VDHelper-Icon after Firefox-restartup.

    The icon soes not even show-up on Mozilla main search page... How do I install Download Video Helper on Windows 8 ??

    Whether "Video Download Helper" Addon shows Mozilla Extensions?
    Remove your Addon and Reinstall it.

  • New windows 7, potoshop elements 3 not working....

    How do I get photoshop3 to work on windows 7.  whitch Photoshop works with win7...

    PSE 3 was release long back while win 7 was released in 2008 time frame. so, this might work or not. If you wish to upgrade it`s always good to have latest version which is PSE 11 in market now. You can download trial and see if it serves your purpose.
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
    Hope it helps
    Thanks,
    Garry

  • Windows Vista and iTunes does not work

    First Time sorry for my bad English, I'm from Germany and my English is not the best.
    I have the new Windows Vista but iTunes does not work good.
    And I have to use it, to manage my music on my iPod.
    When there will be a Vista compatibles Version of iTunes??
    And when will come an 64-Bit Version?
    Thanks for Help,
    Karsten

    iTunes running under VISTA does not recognize media burned by iTunes Backup (v7.0.2) from a non-Vista machine.
    The original machine recognizes the media just fine, but the new VISTA machine does not recognize the dvd at all.
    Anyone else having a problem with VISTA recognizing burnt media?

  • I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

    I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

    it is a windows 8

  • ITunes download using Firefox on Windows 7 64-bit does not work

    I just got set up on a new Windows 7 machine (64-bit) at work.  I was trying to download the iTunes exe file to my machine and was initially using Firefox as my browser.  After multiple attempts to save the file were unsuccessful, I decided to try a different browser.
    I popped over to Chrome and it downloaded with no problem.  I thought I would share in case anyone else runs into the same issue.

    This has worked for some of us but not all. Go to control panel and uninstall itunes and icloud, restart pc, go to apple site and download itunes and icloud. Good luck.

  • I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

    I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

    Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
    Från: Mylenium 
    Skickat: den 29 december 2014 16:48
    Till: Tony Bohman
    Ämne:  I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
    I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
    created by Mylenium <https://forums.adobe.com/people/Mylenium>  in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

  • Windows 8.1 pro 64 bit - finger print not working (sony viao 15126pab)

    http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-pro-64-bit-finger-print-not-working/664d9ca8-a0ea-479f-851d-3631e3c1404c hi i am using sony svs 15126pab  2 days before firefox hanged so i forcefully shutdown the system , after rebooting fingerprint not workingthen i go to device manager i found biometrics working properly , 2, 3 times restarted then also finger print not working, then i checked the authentic true suite " its giving error message box and closing every times then i uninstall authentic true suite and installed again ,it asked registration and i  registered but i didn't see the finger enrolling options in the software . i enabled biometrics options  in administrative templates (components) , other options also enabled in services restarted , reinstalled from Sony Store  - nothing helps..................... please help me ,,, i cant enable the add option of fingerprint in sign in options in settings.. the add option is like deactivated , no biometrics tool in control panel, no fingerprint enrolling option in authentic true suite . i purchased the system with windows 8 pro then upgraded to 8.1 now its reserved to windows 10 . so pls give me some solutions to rectify this problem 

    I cant access any printers, not even the virtual printers.
    What I would do is use ProcMon to find out why that Event entry was written.  Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable.  Since IE9 there have been new .dll  involving printing
    which have not been reflected in any of our repair tools.  However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
    unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
    and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
    Robert Aldwinckle

  • I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work.  How can I download it to my laptop that has Windows 8?

    I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work.  How can I download it to my laptop that has Windows 8?

    You can get it at this link and validate with your 24 digit serial number - click here for PSE downloads

  • How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?

    How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?
    Thanks x

    You can upgrade to iPhoto '11 with OS X 10.8.5 by purchasing an iPhoto '11 DVD from Amazon, eBay or other source - or you can upgrade your OS to Mavericks for free if your system meets the requirements and then purchase the upgrade to iPhoto '11 version 9.5.x from the App store - in either case backup first in case of problems
    LN

  • I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work.  Suggestions?  Thank you.

    I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work.  Suggestions?  Thank you.

    The apps can only be run on an iOS device.   They will not run on your PC.

  • Easy print not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1

    Easy print is not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1 . Printers dont get redirected when you connect to the terminal server. The server we are connecting to has Windows 2008 server.  On 32 bit Windows
    7 and windows XP clients Easy print is working fine and printers get redirected in terminal server.

    I am having the exact same problem. Windows 7 works fine, but 8.1 will not redirect printers. Others said to check local policy terminal services settings and my setting are all set as they should.
    I think Windows 8.1 is not telling the terminal server what printers it has.

  • Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

          
    I originally posted this question here:
    answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
    and was asked to post it on this forum...
    I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
    it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
    up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power.  I have finally gone back the previous version 9926, which has its issues but no where near as bad
    as not having any network connectivity!  Does anyone have this issue and a workaround? 
    Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

    Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
    this... Thanks!
    I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
    (but I suspect not just the only culprit) in this above mentioned problem...
    10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
    is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
    laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
    or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
    I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop. 
    Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
    Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
    that has happened with the Cisco software install attempts under 10041.
    Another note: CISCO Anyconnect also has the issue.

  • File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

    File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
    I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
    Thanks

    I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
    Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
    I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

Maybe you are looking for