New Window Page Shifted??

I opened a new window page using "Command N" but the page is shifted to
the left, not centered. I don't remembered what I did.
I tried moving back to the center of my screen then quit. Then the 1st window
page is fine but the 2nd window page is still shifted!
How do I fixed this?
bobo

You need to disable that McAfee Site Advisor extension as it isn't working properly in Firefox 7 and is causing that problem.

Similar Messages

Thanks For Your Support in advance i want to know that when I open a website that time view print option and when I click close button then page also new window page also close. I want to copy it how i can stop this print option?

WHEN I OPEN A URL THAT TIME WITH PAGE OPEN SHOWS PRINT OPTION AND WHEN I CLICK CLOSE BUTTON OF PRINT OPTION THAT TIME NEW WINDOW BUTTON IS CLOSED. I WANT TO CLOSE ONLY PRINT OPTION. PLEASE HELP ME...............THANKS

Many sites which offer specific "print formatted" pages do that: they assume that once you have finished with the print dialog you no longer want the page itself. So for your convenience they close it. Not so convenient for you, since you still want to view the page.
I'm not aware of an easy solution for this. I can think of a couple different approaches.
First, maybe there's an add-on to solve this? That would be easiest.
Second, maybe there's a userscript to solve this?
The Greasemonkey add-on runs userscripts which you can copy or download. Be careful to install only long-establish and trusted scripts. (''Is there a site that has this bad behavior that I can view without logging in? I will test one of my existing scripts to see whether it helps.'')
Third, Firefox has an old system for restricting site permissions in a custom text file in your profile folder (named user.js). Editing this file is a bit advanced, and I haven't been able to test it, but the system works along these lines:
 // Define a policy name for window.close permission
// (assumes you don't have this pref already)
user_pref("capability.policy.policynames", "nowindowclose");
// Define policy: disable sites from using window.close
// in their scripts
user_pref("capability.policy.nowindowclose.Window.close", "noAccess");
// List of sites subject to this policy
user_pref("capability.policy.nowindowclose.sites", "firstbadsite.com secondbadsite.com");
Again, I haven't tested that and recommend looking into add-ons first.

Page Title Bar Changes with 'Launch in new Window'

Hi All,
We have a strange situation where we create a page containing an iview with the friendly name on both set to 'test'. This shows fine on the browser title bar as <friendly name> - <portal text> - <browserinfo> e.g "test - SAP EP6.0 - Internet Explorer". All fine so far...
However, when we open a page in a new window via the 'Launch in New Window' page property, the <friendlyname> reverts to the server name. e.g "http://servername:50000 - SAP Enterprise Portal 6.0 - Microsoft Internet Explorer"
We are on EP6 sp2 p14 and have implemented the change to the <portal text> to reflect our customer name.
Any ideas on why this is happening ?
Thanks in advance
Rob

Hi Siva,
I have already implemented that change to the central configuration. This only relates to the <portal text> (Sap Enterprise Portal 6.0 by default), which doesn't change.
What I need to know is -
a) why the page title changes when you launch the page in a new window
b) what I can do to stop this happening.
thanks
Message was edited by: Rob

Opening a New Window in SJSC

Hi all,
I have a slight problem here, inside my table I have a hyperlink, based on the records retrieved, this hyperlink will have different URLs. In the button_action() I have the following code:
getHyperlink().setTarget("_blank");
switch(type) {
        case Constants.TYPE_1:
            getHyperlink().setUrl("/faces/Page1.jsp");
            break;
        case Constants.TYPE_2:
            getHyperlink().setUrl("/faces/Page2.jsp");
            break;
        case Constants._TYPE_3:
            getHyperlink().setUrl("/faces/Page3.jsp");
            break;
        default:
             logger.error("submit_action|Type invalid!");
public String hyperlink_action() {
    //Add get row table here
    getRequestBean().setRequestObject(rowData);
    return null;
}I need to pass the table row where the link is clicked into the RequestBean and open a new window to display some information but because the action() is not executed I cannot pass in any information at all.
1) The problem is that because the URL is preset before the table is populated, when I specified a hyperlink_action() to be set as the action when the link is clicked, the method is not called. The new window page is opened directly. I cannot populate any JSF components as the action() method is not called to extract the row details and put into the request bean.
2) If I place the .setURL() codes in the action method, the window created will contain the exact page as the parent window. The desired page will not be loaded.
I'm now stuck. Would appreciate it if anybody can guide me in the right way of getting the new window populated with the results.
regards,
Michael

If you want to open a new window besides your original window, then you have to do it with javascript. Put a code similar like this in your onClik property of your hyperlink:
window.open("faces/Page1.jsp", "","toolbar=0,scrollbars=0,location=0,statusbar=0,menubar=0,resizable=0,width=400,height=450");
return false;When you click the hyperlink, it will open a second window of Page1.jsp. You can use if-else construct in javascript to choose which page you want to show.
If you want to pass a value to the second window, you can use query string like this:
window.open("faces/Page1.jsp?par1=value1", "","toolbar=0,scrollbars=0,location=0,statusbar=0,menubar=0,resizable=0,width=400,height=450");
return false;Passing a field value in table component to second window:
window.open("faces/Page1.jsp?par1=#{currentRow.value['FIELDNAME']}", "","toolbar=0,scrollbars=0,location=0,statusbar=0,menubar=0,resizable=0,width=400,height=450");
return false;To retrieve the parameter in the second page (in this case Page1.jsp), put this in init():
javax.servlet.http.HttpServletRequest req = (javax.servlet.http.HttpServletRequest) getExternalContext().getRequest();
        String par1 = req.getParameter("par1");After getting the parameter value, you can do the rest as your normal page, ie populating the page the way you like.
AFAIK, the only way to open a new window is through javascript only. CMIIW.
Hope that helps.

RFQ buttons do not open in a new window

Hello,
We are on SAP SRM 7.0 with EHP1 and have configured bidding process. We are able to create RFQ from the navigation link however the following buttons viz. Create RFQ,Display RFQ ,Edit and Response and Awards on click of it do not open a new window page.
This issue occurs in both IE8 and Firefox browsers
Note: The RFQ creator is assigned with the Strategic purchaser EHP1 role and with the required portal role
Please let us know if there is any additional authorization needs to be given or any portal configuration is missing.
Regards
Sachin

Hello Sachin,
Please get in touch with your portal consultant and ask him to check with the Iview integration. Also do ask him to check with the Event button.
BR
Gaurav Gautam

New window in iweb??

Can one have a hyperlink on a page that when clicekd, opens a new window, to show content? This would then leave your main page open and have a new window/page on top of the original page and thus, it's amaller size, like a pop-up window...?

I'm lost here,, now i have followed all instructions that i can find when it comes to editing html files, and i save and then up load my edited files back to idisk, however when i open the web page, all i get is the html displayed on the web browser. Now i have edited html files with textwrangler, tacohtml, even dreamweaverm, and i still get the html displayed on the web page instead of the webpage itself,,,
i am definately going wrong somewhere,,, can anyone help here?
regards
Dmac

I have a problem a tabs each time I open a fresh webapge it will open up in a previously open page instead of opening in a fresh page. WHY? BTW Open in a new windows instead is ticked

I have two tabs up "facebook and download.com" now if I click on a fresh page I hope to see a 3rd tab open up but no! it just opens up in one of the two tabs I have already have open.
I have no idea why this is!

The setting in Tools > Options > Tabs: "New pages should be opened in": "a new tab/window" is for links that specify a target window to open the link in. 
That option allows you to divert such links to a new tab or to the current tab.
* Hold down the Ctrl key and left-click a link or middle-click a link to open a link or bookmark in a new tab.
* Hold down the Shift key in addition to the Ctrl left-click or middle-click to toggle loading in the background.
* Hold down Shift and left-click a link to open a link in a new window.
Links that do not specify a target window open by default in the current tab.
.

Firefox 3.6.13 - Why, when I use the dropdown File menu to open a new window, does FF open my Home Page tabs? All I want is a blank page.

I have four tabs in my home page:
2 - https://mail.google.com/mail/;
1 - http://us.mg5.mail.yahoo.com/dc/launch;
1 - http://www.facebook.com/login.php
When I use the "File" drop-down menu I want only a blank page, but I get the four tabs. How go I get other New Windows to open as blank pages?

A new window open by default with the Home page(s), tabs open a blank page.
The only ways to avoid opening a new window with the home page is either to set the home page to about:blank (ie disabling the home page) or use a bookmark with the location set to about:blank and use Shift + left-click to open that link in a new window.

When I open a New window the window doesn't open with a blank page, it opens with my start-up page!

When I open Firefox, it opens to pages I was on when I last closed it. After that, when I open a brand new window, and I don't use a link, it isn't a blank page but instead it shows the same pages as when I started up Firefox. I don't need two windows of the very same pages! I have to delete one of two of the duplicated pages and then my url into the bar to get to the page I want. I want to have a new window with a blank page

It is the default action in Firefox to open a new window with the home page(s).
A possibility to avoid that is a bookmarks (e.g. on the Bookmarks Toolbar) with the location set to about:blank and use Shift + left-click to open a blank window or set the Home page to about:blank and use a bookmark to open the home page.

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
          Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
          Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
          File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
          Show Expired Certificates
select it. Otherwise it will show
          Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
          Secure Sockets Layer (SSL)
select
          no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
          When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
          Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
If that's not what you see, post the contents of the window.

When i am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to keep typing. i have to keep clicking on the page to continue to type letter by letter...is there some function on that i don't know about?

When I am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to continue typing...i have to click in the browser to allow typing to continue...is there a function running that I don't know about?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

When I open a new window (Ctrl+N), I want a blank page to appear. I do not want my home pages opened. How can I do that?

When I open a new window (Ctrl+N), I want a blank page to appear. I do not want my home pages opened. How can I do that?

A new window opens by default with the home page(s). 
If you want a blank window then you need to open an about:blank page in a new window. 
You can do that with a bookmark that you open with a Shift+ left-click in a new window. 
Otherwise you need to set the Home page to a blank page and use a bookmark to open the preferred Home page in a new tab.

How to pen new window while redirecting to a page

Hi,
I have a jsppage 1,jsppage 2 and aspPage. In jsp2 I am getting the
values from jsp1 using request.getParameter("hhhh").Once I get
all values in jsp2 , as soon as I got the values I need to redirect to asp from jsp2.
I don't have any form or any button in jsp2.When I do submit in jsp1,
immediately it has to open asp page in new window. My question is how
I open the asp in new window in this redirection case .....?.
I tried this way but not working ...
WebsiteUtils.sendRedirect(request,response,window.open("ASP page"));
I know if I have submit button in jsp2 I can write a javascriptfunction
to opennew window but here the case is different....
Appreciate your reply.
Thanks

On jsppage1, instead of using a from submit button, you can create abutton and write th onClick as
<input type="button" value="OK" onClick="window.open('jsppage2.jsp','win2');">
Now in Jsppage2.jsp, after doing all the processing, use sendRedirect to call jsppage3.jsp.
Since jsppage2 is never being displayed, page3 will bw the one which will be shown in the new window opened by the name win2 on onClick.
If I have understood your requirement correctly, then this should work for you as I have tried it out.

When clicking on links that open in a new window, the links don't open and Firefox freezes in a way. I can navigate the page I am on but cannot click to open a new tab or bookmark.

When navigating the internet, if I come across a web page that has a link to open a picture or program in a new window, if I click on it, it does not open. Firefox immediately looses functionality in that I cannot open a new tab with the mouse wheel, right click to open a new tab, or use my bookmarks in either the drop down or toolbar to navigate away. I can usually still navigate the page that I am on, for example, (https://loanconsolidation.ed.gov/AppEntry/apply-online/appindex.jsp), when it freezes I cannot click on any of the content at the center of the page but I can still use the links from the list on the far left. For an example of the pictures, (http://www.insect-sale.com/), if you click on "New Arrivals" at the top of the page it takes you to a list of products that can only be viewed by clicking on them. Usually a picture of the item would open in a small window but it does not and Firefox freezes. This has also happen when I try a view a degree audit on a school's website where a program would usually open in a new window. The only thing I have been able to find that still functions properly when this happens is the home page button. I can click on it or use the wheel to open it in a tab just fine, but if I try and go anywhere else I cannot. The only way I can get Firefox back to normal is to use the Task Manager and end the process. Another thing I have noticed, that may or may not be related; is that my Norton Internet Security toolbar, that should show up below the bookmarks toolbar and above the tabs, only shows up about 1 out of every 10 times I open Firefox. Some days it doesn't show up at all. If it does show up and I log into Identity Safe, the autofill for the programed website works, even if the toolbar doesn't show up the next time I open Firefox.

Go to Tools->Options->Apps
Here you should see two columns: Content Type on the left, Actions on the right.
Find and select excel spreadsheet or any other content type in the left column. There should be a corresponding action in the right column. What is it? You can use the drop-down list to select the option you want:
Always Ask - Firefox will ask each time: What do you want to do with this file?
Save file - Firefox will save this file to your computer
Use - Firefox will give this file to the program to open it
In case of saving, Firefox will either prompt you every time where you want the file to be saved, or save it to the default location. It depends on the preference in
Tools->Options->General->Download

Getting Page Load Error while opening a Opportunity in new window

Hi All,
outbound SSO is enabled.
when i try to punch-in to my application from CRM through opportunity web link with Web Link Target as "open in custom tab" its working properly, but when i have Web Link Target as "open in new window" i am getting page load error. previously with out Outbounf SSO it is working properly.
Do i need enable any settings in CRM
thanks

when the web link target is "open in new window" or "open in current window" the request send to third party application from CRM ONDemand is HTTPS request as SSL is not enabled it is giving "page load error"(In the web link we are specifying http only) (User athentication type is "username & password/ SSO")
Is there any setting in CRM Ondemand to send Http request only instead of HTTPS?

New Window Page Shifted??

Similar Messages

Maybe you are looking for