New windows opening behind current one?

I can't seem to find a preference to change where you can have new windows open in front of the current window when you command-click a link...
I'm ready to downgrade from what is turning into a truly annoying experience...

I don't use tabs, they hinder my work...
I turn tabs off.. then command click links to open in new windows.. but the new windows now open behind the current window... which is counter intuitive. the new window should open in front...
I can't seem to find a preference to change it to the way the Safari 2 works...
I think I just need to downgrade Safari.. there's too many irritating "features" in it that can't be turned off..

Similar Messages

  • New windows open behind current explorer window

    Every time I open an image or a video from within explorer, photo viewer or WMP opens it behind that explorer window, and I have to click over to it - why is it not taking focus and opening the new window on top?

    This may not work for everyone and I don't know what other ramifications may appear, but what I finally did was: click on Configure ObjectDock; Settings; Troubleshooting Options; under System Hooks tick Temporarily disable all special Window-Event hooking.
    So far no adverse effects otherwise and my media programs open on top as they should.

  • When a window is open and I try to go to a new bookmark or a link in an existing site, the new window opens behind the old window.

    It isn't every time, and sometimes doesn't happen for a long time, then I'll go to a bookmark or toolbar link and the new window opens behind the one I was on. Example: I just opened a second window (CTRL N) and clicked on a bookmark. It opened a new window behind the one I'm on as I type this. I did the same steps again and it opened the new window in front of this one. It doesn't seem to make any difference which site I start from or go to or if I use CTRL N or let the bookmark do the opening.

    This can happen if you have a tab open in the main browsing window that uses the plugin-container process (e.g. Flash).
    *[[/questions/977544]]

  • New window opens behind, etc.

    I'm running Safari 4.0.5. Several things are happening. I can't launch Safari directly from the dock. The Safari icon on the dock open a finder window with the Safari icon, from which I can launch Safari.
    After several minutes of inactivity, the address bar will not accept input. Clicking on the bar moves the bar. I'm lucky if re-launching Safari solves the problem. Then there are the windows. When I click on a link, the new window opens behind the old one. Clicking on the window does not bring it to the front. I have to move the original window out of the way in order to enter text or click on links in the new window. Sometimes, the dock indicates Safari is running, and there is a Safari window open, but not active. Clicking in the window does not make Safari active. Sometimes Safari is active and I want to go to the Finder. Clicking on the desktop does not take me to the Finder.

    HI John,
    Move the current Safari icon off the Dock. Just click and drag the icon straight up until it goes "poof".
    Now go to your Applications folder and try launching Safari from there. If you can, then you will see a new Safari icon in the Dock. Click that then click: Options/Keep in Dock. or just Keep in Dock.
    You may need to reset Safari and empty the cache also.
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset. Relaunch Safari. If you still have problems...go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
    Make sure Safari is not running in Rosetta. Right or control click the Safari icon in your Applications folder then click Get Info. In the Get Info window click the black disclosure triangle so it faces down. Where you see Open using Rosetta... make sure that is NOT selected.
    If you still have problems, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
    Carolyn

  • New Window Opening Behind Browser Window

    I have produced a page in DW3 for an artist where you click
    on a thumbnail and it opens a new window with an enlargement of
    that image. (I use the DW3 javascript behaviour to do this).
    When I test it on my browsers the windows open in front of
    the main browser window and all is hunky dory.
    When my client does the same, she claims that some of the
    windows open in front of the main browser window but some open
    behind the browser window and are obscured. She says she perceives
    a "flash" if the new window opens behind the browser window. She is
    using Firefox 2.0.9.17
    Has anyone experienced this behaviour and figured out a
    fix?

    .oO(spiro_t)
    >I have produced a page in DW3 for an artist where you
    click on a thumbnail and
    >it opens a new window with an enlargement of that image.
    (I use the DW3
    >javascript behaviour to do this).
    >
    > When I test it on my browsers the windows open in front
    of the main browser
    >window and all is hunky dory.
    >
    > When my client does the same, she claims that some of
    the windows open in
    >front of the main browser window but some open behind the
    browser window and
    >are obscured. She says she perceives a "flash" if the new
    window opens behind
    >the browser window. She is using Firefox 2.0.9.17
    >
    > Has anyone experienced this behaviour and figured out a
    fix?
    Usually the user/browser decides where new windows/tabs will
    be opened.
    But why open a new window at all? Why not use something like
    Litebox?
    Micha

  • New window opens behind existing window - how to modify?

    Sometimes when I select another program or function, the new window opens up behind an existing window on the screen.  I know there are ways of getting to the new window, but how can I make W7 operate like earlier Windows in this respect - i.e. always open a new window in the foreground?

    This is an OLD POST, but I think I need to contribute my two cents!
    In Windows 7, window pop-ups are control by FOREGROUNDFLASHCOUNT and FOREGROUNDLOCKTIMEOUT in the REGISTRY (You need to CLICK ON the START ICON at the leftest of your TASKBAR, and type REGEDIT in the SEARCH PROGRAMS and FILES field).  Go to the REGISTRY
    EDITOR and it is at this path:
    HKEY_CURRENT_USER\CONTROL PANEL\DESKTOP.
    One click on the DESKTOP (Manual Display), and your will see the detail populate at the right side of the REGISTRY EDITOR window.  Go to fine the FOREGROUNDLOCKTIMEOUT, and double click on it.  
    The EDIT DWORD small window will pop-up.  Change the VALUE DATA to ZERO.  
    Yes, you must restart your PC in order for the change to apply.
    Here is what is telling us in the Windows 7 manual:  http://technet.microsoft.com/en-us/library/cc957205.aspx
    ForegroundFlashCount
    2 out of 6 rated this helpful - Rate
    this topic
    HKCU\Control Panel\Desktop
    Data type
    Range
    Default value
    REG_DWORD
    Number of flashes in decimal
    3
    Description
    Specifies the number of times the taskbar button flashes to notify the user that the system has activated a background window. If the time elapsed since the last user input exceeds the value of the ForegroundLockTimeout entry,
    the window will automatically be brought to the foreground.
    Related Entries
    Yes, if the DOWNLOAD timer in the FOREGROUNDLOCKTIMEOUT (SHOWING 30D40 Hexadecimal) is longer than the 3 FLASH(Default), then you will see the new WINDOW pop-up behind your mother window or your application.  Set the VALUE DATA to ZERO, sooner
    than the 3 FLASH of the FOREGROUNDFLASHCOUT, the the DESCRIPTION above is applied.
    Good luck
    Leng

  • Go Recent Folders opens in new window, not the current one

    I noticed with Mavericks, when I use Finder>Go>Recent Folders, it opens a new window instead of changing the contents of the currently open window.
    Is there a way to get it to work the way it used to?
    Also, I thought you could open folders in new tabs automatically.  I have to right click for that option.
    In Finder Preferences, I have tried Open folders in tabs instead of new windows both turned on & off.  Nothing changes.
    thanks in advance

    Surebrec,
    '''Update:''' I found this, which you might want to try out before continuing reading: http://www.techsupportalert.com/content/how-stop-firefox-stealing-window-focus.htm
    Basically that would mean the reverse for you.
    If that didn't work:
    Does this problem appear without you having many applications running at the same time and/or if you have pinned a lot of applications to your Taskbar in Wondows 7?
    Some users have reported that this problem manifests itself if the row of icons in the Taskbar simply can't make room for any icons expanding (i.e. new windows in for instance Mozilla Firefox or Internet Explorer).
    If so, you might want to take a look at: http://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

  • New app windows opening Under current ones

    so I have this strange issue that just suddenly started happening and it's driving me nuts. this only seems to happen when I open applications, never folders, and it does it to ALL applications, so I know it's a system problem. the issue is this: say I've opened FireFox and now decide to open System Preferences. when I click on the System Preferences icon, it appears that nothing has happened, when in fact System Preferences HAS opened, only the Sys Pref window opens UNDER the FireFox window. unless I'm going nuts I seem to remember that all apps opened their new windows on TOP of all other windows. the same thing happens if I open Mail, Word, Safari, you name it. I cannot find any logical preference that I might have changed to cause this, and am really sick of having to find new windows after I open an application. any help would be greatly appreciated.

    Hard to say, except something mucked up in memory, where everything running on the machine is stored and operating. You might want to review what you had done since the restart prior to it happening. If it doesn't come back, running the Apple Hardware Test program, extended tests, wouldn't hurt. If you want to thoroughly check out the installed RAM, download and run Rember.

  • New window open behind other windows?

    I'm apple clicking links to see them in their own window. They are coming up behind current windows, shouldn't be other way around? shouldn't they come in front of current windows?

    Hi Kevin,
    Yes, they used to. Not sure why Apple changed things but now you need to set the following pref:
    Safari Preferences -> Tabs -> Select tabs and windows as they are created -> Check this
    Even if you have tabs turned off for apple+click, this preference still alters the new window behaviour.
    Hope that fixes it for you.

  • Spaces - New Window opens behind existing window

    I have an annoying situation - I love Spaces - but it has a New Window characteristic that drives me nuts.
    For example, if I click a website link in email or other application, the linked window will almost always open behind a window that I'll already have open in Safari.
    Or if I double click an image in Finder, it will open behind open windows in Photoshop or Freehand.
    It would be great if these new windows would open in front!! Any suggestions? I can't find any settings to change this.

    Hi,
    To resolve this issue, modify the value of the ForegroundLockTimeout registry entry in Registry Editor. To do this, follow these steps:
    ===============
    Important This section, method, or task contains steps that tell you how to modify the registry. However,
    serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
    1.
    Click Start
    , click Run , type regedit in the Open
    box, and then click OK .
    2.
    In Registry Editor, locate and then click the following registry subkey:
    HKEY_CURRENT_USER\Control Panel\Desktop
    3.
    In the right pane, locate and then double-click
    ForegroundLockTimeout .
    4.
    Under Base , click
    Decimal , type 0 in the Value data
    box, and then click OK .
    Note The default decimal value for the ForegroundLockTimeout registry entry is set as
    200000 .
    5.
    Quit Registry Editor.
    6.
    Restart your computer.
    Best Regards,
    Sally Tang

  • New window opening for only one standard ESS service

    hi everyone,
         I am facing a problem with only one standard service Org chart. All other services like who's who , change own data are opening in same portal window. but when i click OrgChart its opening in other window. what could be the problem ? Is it something related backend customization? 
    Thanks in Advance

    Hi ,
    Go to tcode SPRO - cross application components - HomePage Framework - Resources - Define Resources -
    check window Name property for EMPLOYEE_ORGCHART_SERVICE05, MSS_HCM_SERV_OCI_LAUNCHER,MSS_HCM_SERV_OPROFILE_QUALI_DETAIL,MSS_HCM_SERV_ORGASSIGNMENT,MSS_HCM_SERV_ORG_PROFILES,
    window Name property should not contain anything.I am not sure which one is the right resource but do some trial and error.
    I suggest not to change the standard resources but create a custom one
    Thanks
    Bala Duvvuri

  • When I open a new windows from my current tab background turns black. Can this be disabled?

    I use Remedy and when I open a new windows from my current one my background turns black. This started when I moved to the new update. Is there anyway to disable this?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • New message opens behind email window

    We are using Windows 7 and Outlook 2010. When opening a new message or replying, the new window opens behind the email and is unseen. Is there a way to make the new window open on top (always)?

    Hi,
    To resolve this issue, modify the value of the ForegroundLockTimeout registry entry in Registry Editor. To do this, follow these steps:
    ===============
    Important This section, method, or task contains steps that tell you how to modify the registry. However,
    serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
    1.
    Click Start
    , click Run , type regedit in the Open
    box, and then click OK .
    2.
    In Registry Editor, locate and then click the following registry subkey:
    HKEY_CURRENT_USER\Control Panel\Desktop
    3.
    In the right pane, locate and then double-click
    ForegroundLockTimeout .
    4.
    Under Base , click
    Decimal , type 0 in the Value data
    box, and then click OK .
    Note The default decimal value for the ForegroundLockTimeout registry entry is set as
    200000 .
    5.
    Quit Registry Editor.
    6.
    Restart your computer.
    Best Regards,
    Sally Tang

  • Is there any way to have new windows open in a different location besides on top of the current one?

    I work with a data entry company and I'd like to have a New Window open on the right side of the screen instead of constantly opening directly on top of the current window (which is about 1/2 the screen on the left). Is there any settings or add-on that will let me do this? I have to do this a lot when I'm working and constantly having to drag the new window to the right so I can see it and work in the window on the left is a pain.

    You could try using the Custom Geometry extension and see how that works for you. ''I have been having problems with it on WinXP since Firefox 4.0 was released last year, maybe it will work better for you on Windows7.''
    https://addons.mozilla.org/en-US/firefox/addon/custom-geometry/
    In Options for that extension setup additional Custom Geometry options ''(height, width, left, & top)'' with different offsets, and when you open an additional window use the drop-marker on the CG toolbar button to select the offset you want for that new window.
    That drop-marker menu hasn't been working properly on my PC, but I use still use CG when running multiple Profiles - each with a different offset, so that I have access at the edge of the current window to "grab" another Profile when I want.

  • Firefox opens new windows under the current window

    Whenever I right-click on a link and tell it to open in a new window, the window opens behind the current window. I have selected "When I open a link in a new tab, switch to it immediately". That used to solve this problem but seems to have stopped working.
    I have read all the threads on this problem, including the one saying it's caused by Flash.
    However, I have checked in safe mode and I still get the same problem.
    This started happening around Christmas on three computers. Since then, because of problems getting a driver to install for a new peripheral, I have done a fresh install of Windows 7 64 bit, reinstalled FF newest version and restored my profile, but get the same problem. At this point I have started in the FF safe mode which should disable all the add-ons, but the same thing still happens. I have also reset FF using the reset option in the help menu. It doesn't always happen, but it can happen when flash is already running in another window.
    Are there a series of steps I can take which will verify that the fault is caused by Flash? I had thought the safe mode would do that.
    Honestly, this is enough of a problem to make me switch browsers, and I don't even like any of the other browsers. If you can offer any other suggestions I would really appreciate it.

    Safe Mode actually doesn't disable Flash. It's a little confusing: it disables extensions, but not plugins, so "Restart with Add-ons Disabled" is really not a very good description.
    If you want to test with Flash disabled, you can set it to "Never Activate" temporarily. Open the Add-ons page using either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column that lists the categories, click Plugins. You're looking for "Shockwave Flash." Change it to "Never Activate."
    You can keep this tab open during your testing. If you close and re-open the Add-ons page, Shockwave Flash will fall to the bottom with the other disabled plugins.

Maybe you are looking for

  • How to add a library (libSomeRandomlib.so) to a project....??

    Ok, so I've been trying to get CERN's ROOT program/libraries to work in an xcode project for a while, but I'm running into one really weird error, and I think I may just not know how to add a library to a project correctly. Suppose I create a new Xco

  • Fire fox is not reading my XML file for digital signature

    I have to upload the xml file in www.incometaxindiaefiling.gov.in by digitally signing the xml file. When I click on the tab for digital sign, the message come " cannot read the xml file"

  • LPs to mp3 (or other)

    I am ready finally to begin recording our large LP library to digital music. I have an Intel iMac. What kind of connector do I need between the turntable and the computer? I assume I can use GarageBand (as I saw in another post) as the software to re

  • Decode or Cross tab

    Hi all, Pls help me in fiding the solution for the for following query.. select a.user_id,b.description,a.module_id,a.access_id from module_access a ,module b where a.module_id = b.module_id user id description Module id Access id ======= ==========

  • Strange behaviour of JBuilder Plug-In with Inner class

    Hi, I'm using the Kodo 2.5.2 Plug-In with JBuilder 8. I have an inner persistent class. It seems that it is necessary to have a zero length file named EnclosingClass$InnerClass.java for the build process to work, since if I delete this file and run t