New Wireless framework

Hi guys,
check out this framework, my team developed it in order to facilitate the process of developing chatting applications that use Jabber as its protocol.. check it and tell me ur remarks..
http://www.sourceforge.net/projects/beep/

one more thing: if you are looking at testing a specific feature (file adapter wizard for example), please let us know: we are looking for "champions" for each of the new features. -Edwin

Similar Messages

Firefow will not open at all on one computer and on the other it opens but will not load. I just added a new wireless router, could this have anything to do with it, it had been working fine up until I installed it Tuesday night. Internet explorer won't

I installed a new wireless router on Tues. (May4) up until that time I had no problems using Firefox. Now I cannot get it to open on one computer, and the other it will open but will not load. Wondering if it has anything to do with the router, my provider or our computers. Again, it had been working fine. I am also unable to open interent explorer now on either computer.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; AOL 9.0; Windows NT 5.1; GTB6.4; AskTB5.6)

Sounds like a problem with the router installation/configuration (likely) or a DOA router (very unlikely).
Visit the forums for the router manufacturer (i.e., linksys, d-link, etc.) and ask for assistance there. There is probably a link to help listed in the router manual.

HT1178 Do I want to create a new wireless network or join my current network? I can't connect an ethernet cable to the Mac / printer and to the wireless modem at same time - in two different rooms.

I am trying to set up Time Capsule so that I can do my first backup (after 1 1/2 years!) with Time Machine. I have read other forums, but in each case they instructions eventually do not apply.
I have connected my TC to my existing wireless router. This sits in a bedroom and cannot be moved as a rental home.
I have plugged in the TC and updated the software.
Now - do I want to A Create a New Wireless Network (remember I can't connect the TC to Mac using an Ethernet cable). B Replace an existing base station or wireless router with TC (only intend to use for TM as don't know other benefits as of yet). or C want TC to join current network.
Thinking C. If I choose C, it then asks A TC to wireless join current network (NO as already connected using Ethernet). B want to connect TC to my network using Ethernet to extend my existing wireless network. C want to disable the wireless network on this TC and connect it to my computer or network using Ethernet - CANNOT do this as devices can not be in the same room.
Or do I want to create new wireless network - first set of questions - choice A? What is the benefit to creating a new one when I won't be in this rental house for longer than 18 more months??
Please help and quickly! Thanks!

Let me suggest some things.
But first ask exactly what wireless router you have now and what type of broadband service?
Are you happy with the wireless on the current router? If so, then you can plug the TC straight into whatever computer you have by ethernet, short 1M cord with no connection to the network. And use it without affecting your existing network at all. This is trivial setup.
Although you don't say exactly what Mac and printer you are using, is it a desktop? Laptop it is definitely easier not to plug it in, but a desktop you can plug in the TC and it will all sit happily together.
How is the printer connected and to what?
I am not sure why you need such quick help.. this is all minor setup stuff.. and 18months in todays world is like permanent man.
Your multiple A, B, C are more confusing than helpful.
The best choices without more info.. are to replace the existing wireless router with the TC. ie your option B.. but how to do this depends on the type of connection. Is it cable or adsl? Can you easily bridge the existing modem router.. if that is what it is?
Think carefully in the ideal world what would you like..
and what do you have..
We can probably suggest ways and means to fit what you like to what you have.. without introducing a stack of options that are doing your head in.

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.

May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete.

I got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

Under Network Preferences, select the WiFi
click on "Advanced..." button
Select the network you want to delete from the list and click on "-"
Click "Ok"
Click "Apply"
Well done ;-)
You may also want to delete the wireless key from Keychain.
Open Keychain, seach for the old wifi network name, slect it and click delete

Function keys do not work on new wireless keyboard

Hello....my good friend just bought a new iMac G5 2.1 spotlight model computer and has had troubles with his new wireless keyboard in that all 16 function keys do not work at all. Got any ideas or is it just a defective keyboard? He bought this at my recommendation so i am trying to make it all work smoothly for him. Would appreciate a quick response as he has now had this mac for 2 weeks and we cannot figure out the problem. Thanks in advance for any and all help

I have no issues using the Apple BT keyboard. All function keys that apply to the iPad work correctly; display brightness, iPod app control, etc.
Use the most recent version of iOS and also iTunes on your computer. Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.
If that does not work, then restore the iPad to it factory settings.

Cannot find instructions on how to connect printer to a new wireless network.

HP 4500 series was connected to my wireless network successfully for a year. Upon moving and obtaining new wireless network I cannot find instructions for changing wireless network for printer to recognize.

Hi,
Just connect printer to a new Network, like a brand new printer. Here are the manuals (many parts).
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Connecting Printer to a new Wireless network (changed network provider)

I have recently changed broadband provider and I am struggling to connect my printer (HP Deskjet 3050A All in One Printer) to my new wireless network.
I have clicked on HP within programs and tried to set up the printer but my laptop is not recgonising that the printer is connected via the cable so its not picking up the printer in order for me to set it up as a new device.
Help please??

jwatson84
Welcome to the HP Community Forum.
The easiest way to deal with this may be to install (reinstall) the Full Feature Software for the printer onto your computer.
The installation procedure includes a connection process that might resolve the issue for you without adding any more stress to the situation.
Along with the basic instructions and install videos, you can find lots of helpful Troubleshooting / Howto help at the printer's website support pages.
TIP: You do want to disconnect the USB cable from the printer before you install / reinstall the software.
General Instructions to Install the Printer Software
Reminder:
In most cases, the Solution Center has been replaced by the Printer Assistant.
The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
Windows Operating System:
Create Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
OR
Open HP Deskjet 3050A e-All-in-One Printer series - J611
Select your Printer from the “Results” list
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
After the initial installation is complete and working, check / install Category - Update
There is valuable information at the support website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, plus alerts and notifications for your printer. Be sure to take an extended look at what is available. Bookmark the page.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Connecting to new wireless internet makes macbook stop functioning?

When i connect my mac book pro to wifi internet it stops functioning. When airport is switched off it works fine. Anybody know why?
The strange thing is i recently moved and when i take the laptop back to my original home it connects to the wireless internet fine and the laptop works great. I only have an issue when i try to connect to the new wireless internet at my new place??

Hi adamtreff!
I have a couple of articles that can help you isolate this issue a little further. First, you will want to be sure you are using the correct settings for you Wi-Fi router. These are the recommended settings on your router for best compatibility with iOS and OS X devices:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Next, you will want to troubleshoot your Wi-Fi connectivity. There are some helpful troubleshooting steps located in this article:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for coming to the Apple Support Communities!
Regards,
Braden

New Mac mini & New Wireless Keyboard - can't complete setup

I just picked up a new Mac mini, and a new Apple wireless keyboard. I'm setting up the mini for the first time and i can't complete the setup because the new wireless keyboard doesn't seem to be recognized during the initial mini setup process. Should it be?
I can use the mouse to get me to the point where it requires me to setup an account, but without the keyboard I'm unable to do so.
Is this normal? I don't have a USB keyboard or I would have just plugged it in and finished. I should be able to do this with the new wireless keyboard, right?

I had the same problem with my wife's pre 2009 Intel Mini, had to use a USB KB to do a fresh install of SL, because the BT KB wasn't picked up.
Then on my early 2009 Mini I updated it from L to SL and after SL SW update found several updates, including a bluetooth update. When it came to applying the BT update, it said turn off BT, then proceed. Next came the need for me to enter my password to proceed, but that wasn't possible as the BT KB no longer responded. Fortunately I have a USB KB handy which did the trick.
So my conclusion is you need a USB KB as well as the BT KB, to manage a BT KB Mac. (With the above two examples I used a wired mouse)

I have problem setting up a new wireless keyboard and my new Mac mini

I have problem setting up a new wireless keyboard and my new Mac mini

Same with my new mac mini.
Got it brand new via the online shop.
Happy to start with the new mac i really got dissapointed by the fact that it`s impossible to pair the wireless keyboard unless you first connect a USB keyboard to the mac mini and start the configuration.
THIS S.U.C.K.S. !!!
No hint at all from apple that you first have to connect the USB keyboard.
I had to borrowed a USB keyboard from my neighbour :-((
After setting things up it was no problem at all to establish the BT connection with the keyboard.
Works fine now.

New mac mini won't pair with new wireless keyboard

How do you set up a new mac mini with a new wireless keyboard bought separately ... computer does not see the keyboard.
I've seen this question asked before but the only answer seems to be to get a usb keyboard for set up. So do I need to go out and buy another keyboard to complete the set up or is there a way around this
Thanks.

see > New Apple Mac Mini and Apple Wireless Keyboard Un-boxing - YouTube
If you missed the setup, most any cheap'o generic USB keyboard will work with the Mac Mini.

Buying a new wireless router

I'm looking for a new wireless router, since the when I have is extremely old and cannot handle all te bandwitdh in my house. I need a router that can handle 3 computers, a XBox and my phone. My price range is anything from $50-$150 and nothing above that. Any suggestions on what router to get and where to get it (I'm not willing to buy online).

NETGEAR - RangeMax Dual-Band Wireless-N Router with 4-Port Gigabit Ethernet Switch
Model: WNDR3700-100NAS | SKU: 9331403
Expand your home or office network with this high-speed wireless router that features 4 Gigabit Ethernet ports for rapid connection and data transfer.
4.3 Read reviews (660)
Sale: $89.99
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Old printer with new wireless modem/router

i just installed a new wireless modem/router and need to get my printer to work with my comps....i think i need to reassign the IP address and enter the wep...but dont know how

Hi dduve,
Set up a static IP address for your printer, click here and follow the steps in this document to set one up. Let me know if you need more help.
I worked on behalf of HP.

Are there compatibility issues with 1st gen I pad and new wireless printers?

Need to replace HP printer being used with 1st Gen I Pad. Are there any compatibility issues with new wireless printers?

Hello jxroads,
Welcome to the Apple Support Communities!
I understand that you are going to replace your printer and would like more information on what printers are supported for AirPrint. The attached article has a list of AirPrint printers currently supported for iOS devices.
About AirPrint - Apple Support
Cheers,
Joe

New Wireless framework

Similar Messages

Maybe you are looking for