New wmail for each account?

I have 2 Macs, 1 Macbook Pro, and I plan on purchasing the new iPad2 this weekend. I want to have Facetime on all these devices so I could use it from anywhere, but does that mean I need a separate email address for each device (which would mean I would need 4 email addresses? If not, then would a Facetime callping me at all locations? Does anyone know the answer to this?

KLansford wrote:
I have 2 Macs, 1 Macbook Pro, and I plan on purchasing the new iPad2 this weekend. I want to have Facetime on all these devices so I could use it from anywhere, but does that mean I need a separate email address for each device (which would mean I would need 4 email addresses? If not, then would a Facetime callping me at all locations? Does anyone know the answer to this?
If you want to be able to answer a call on any of the four devices, you must use the same iD on each.
If you want to be able to call each device individually, or call on from the other, each must have its own.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Similar Messages

  • Any way possible to have different New Eamil alret sounds for each account

    I have 4 different email accounts on my iPhone. Is there a way to have a different New Email Alert sound for each account. Most of the times I am only interested in emails I get in one or two of the accounts and if I had a different Alert for them I would know right away rather than having to go through each account inbox to find out which one got a new email.

    Not at this time.

  • I'd like Time Machine to backup my personal account's files separately from my guest account's files. Both have big files.  What's the best way to do this?  Should I connect 2 external HD to my new iMac, one for each account?

    I'd like Time Machine to backup my personal account's files separately from my guest account's files. Both have big files.  What's the best way to do this?  Should I connect 2 external HD to my new iMac, one for each account?

    NeuroBrain wrote:
    Since my new external hard drive is have a lot of space, I'm thinking of splitting it for Time Machine and external storage.
    This is a common mistake and I highly advise against it.
    1: TimeMachine saves states of changes and thus requires more room on the TM drive than the boot drive it's backing up.
    2: Something happens to the TM drive, loss, theft, dropped, power surge, etc., you lose both backups.
    3: The storage drive might become a portable need, with it being on the TM drive, now your increasing the risk to the TM backup that something could happen to it along with the storage drive, due to increased movement.
    Seriously, have a read,
    Most commonly used backup methods
    it's ASC User Tip that saves us regulars all the trouble of having to repeat ourselves over and over again in the posts, because we tend to forget things too, or not here sometimes etc.
    "Plan for the worst and the good will take care of itself" - Donald Trump

  • TB 27.0.1 (W7) will not "get new messages for all accounts"

    I installed W7 with IE11and downloaded the latest TB (27.0.1) I have added five email accounts (more to be added) and none of them show up in the left pane - only global Inbox and two folders I created. I can get new messages manually one account at a time, but "get new messages for all accounts" (or Shift F5) does nothing. Most of this happed after MS installed well over 100 updates to my W7, but some of my accounts never did show up in the left pane even before the W7 updates. I have reinstalled TB - nothing changes.

    Matt, I thank you for your kind and gracious response (Ok I will say this only once....). Be assured that I would never think of asking your advice again.
    The crux of the matter has been resolved by checking the “Include this server when getting new mail” box in each account’s “Advanced” box under “Server Settings.” Now every time TB checks for new mail (including on startup), the process is displayed in the lower left portion of the window. I wish this had been explained to me more clearly early on.
    Having all accounts in the left pane has become unimportant now that I can see the mail being checked on startup, periodically, and on Shift F5.
    I consider this thread closed.

  • FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

    Hi there, 
    I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
    database using the fillby query. 
    It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
    each click of the fillby button. 
    also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered. 
    so actually 2 questions here: 
    1. how to populate a new row for each click of the fillby button 
    2. how to delete records from data grid view after an item has been entered 
    Thanks 
    Vishwas

    Hello,
    The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
    Some examples
    Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
    to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
    The following article with code shows this but does not address adapters.
    Conceptually speaking the code in the second code block shows how to get the new key
    Public Class Form1
    Private Sub StudentsBindingNavigatorSaveItem_Click(
    sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
    Me.Validate()
    Me.StudentsBindingSource.EndEdit()
    Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
    End Sub
    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
    'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
    Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
    End Sub
    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
    Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
    End Sub
    Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
    Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
    End Sub
    End Class
    Get new key taken from
    this article.
    Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
    Dim Success As Boolean = True
    Try
    Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
    Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
    cmd.CommandText = InsertStatement
    cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
    cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
    cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
    cn.Open()
    cmd.ExecuteNonQuery()
    cmd.CommandText = "Select @@Identity"
    Identfier = CInt(cmd.ExecuteScalar)
    End Using
    End Using
    Catch ex As Exception
    Success = False
    End Try
    Return Success
    End Function
    In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
    Additional resources
    http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

  • How to get all GL accounts for each account in a given bank...

    Hello Experts,
    Is there a way to get all GL accounts for each account in a given house bank?
    IN our company, there are 5 GL accounts for each bank so 1 GL for 1 account. they are for recon, payables,
    receivables, etc. I checked table T012K but it only shows the main GL account. Hope you
    can help me guys. Thank you and take care!

    Try this.. it is based on company code
    here it_cocodes is an internal table containing company codes
      DATA: BEGIN OF it_glaccount OCCURS 0,
        bukrs TYPE bukrs,
        saknr TYPE saknr,
        txt50 TYPE txt50_skat,
       END OF it_glaccount.
      DATA it_glaccount_wa LIKE it_glaccount.
    LOOP AT it_cocodes INTO it_cocodes_wa WHERE ktopl <> ''.
        SELECT bukrs saknr FROM skb1
          INTO CORRESPONDING FIELDS OF it_glaccount_wa
          WHERE bukrs = it_cocodes_wa-bukrs.
          IF sy-subrc = 0.
            SELECT SINGLE txt50 FROM skat INTO it_glaccount_wa-txt50
              WHERE spras = 'E' AND ktopl = it_cocodes_wa-ktopl
              AND saknr = it_glaccount_wa-saknr.
            APPEND it_glaccount_wa TO it_glaccount.
            CLEAR it_glaccount_wa-txt50.
          ENDIF.
        ENDSELECT.
    loop at it_glaccount into it_glaccount_wa.
    write:/....
    endloop.
    refresh...
    clear...
    endloop.

  • Create new session for each window opening

    From a jsp page i open a page called student.jsp by clicking on students admision no.Therefore lots of pages can be opend in new windows with relevent student details.
    but when i click on the link i called a servlet, get relevent details and redirect to student.jsp. The problem is ,all opened windows have same session id and there are session conflicts.
    How can i create new sessions for each page thru the servlet or is there any other alternatives

    I actually was working on a problem that was similar to this, and the problem is with how each web-browser works with sessions...
    Each browser window (Except in one case with IE) will use the same session in each window.
    However, you might be able to use URL-Rewritting to manage your sessions and get around using cookies for for session tracking. I personally haven't tried this, but I'm betting that it will work.
    Best of Luck,
    Nate

  • If I have two email accounts, one personal hotmail account and one MS Exchange work account, how can I setup individual notifications for each account. Right now, any email from any account has the same notification. I want work to be different than perso

    If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
    Thanks

    Sorry you get only one notification sound for all email accounts.  you can send a suggestion to apple here http://www.apple.com/feedback/

  • I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The wid

    Question.
    I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
    Thank you,
    Loïc

    Accordion or Tabbed panel should to it, with click and open container.
    Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
    Thanks,
    Sanjit

  • New features for each version of  Hyperion major planning

    Good morning,
    I'd like to work on the list of the new features for each of Hyperion Planning major version release: 9.0, 9.1, 9.2, 9.3, 9.3.1. But if there's already available guide/ chart for this, I'd love to refer to that particular documentation.
    Thanks a lot and have a nice day
    Adrian

    Please check the Release content document - Release 12 Financial Applications, which gives the new functionality of the GL module and there is no doc number for this document, I can send it by email if you want.
    Srini C

  • How to Set "delete from hub and server" for each account

    How can I set "delete from hub and server" differently for each account?
    I have 3 emails (2 shared, 1 personal).
    the personal is a 'hotmail' account which has device set to 'sync email', 'push', and 'Use SSL'.
    it will only sync one way (from desktop to device).
    I cannot set the global setting on the device to "delete from Hub and server" without affecting all accounts.
    I do not want to have to confirm delete on every item.
    previous to the 10.3 update this was not an issue.
    am i missing something? or is this another step backwards?

    The only other way would be to set it to prompt every time you get an email. Yeah, I know that defeats the purpose.. I guess in this aspect it is a step back

  • Do I have to add a new contact for each new phone number?

    I just got my phone and I'm adding in my contact manually. I don't see multiple spots for multiple phone numbers for one person? Do I have add a new contact for each phone number a person has? (I.e. One for their home number, one for their work number, one for their cell number).
    Thanks!

    No.
    There is no reason to have a default number of phone number entries that may not all be used and the same for email addresses.
    When manually entering contact info, after entering the first number for a contact, a new phone number entry is made available directly below.

  • My itunes library has organically grown from more than one itunes account but all now on a separate computer.  If I upgrade to iTunes match will I have to pay for each account?

    My itunes library has organically grown from more than one itunes account (all paid for by me) but all now on a separate computer.  If I upgrade to iTunes match will I have to pay for each account or just once, for the computer?

    No.  Provided the computer that you use to upload / match your Songs is authorised to play all of the Songs all works well - once complete you can download Song files that will play on your libraries / other computers without each computer having to be authorised.

  • Help to configure msoutlook separate inbox for each accounts in office 365 in mac

    i have installed office 365 in mac pro book and configured 3 accounts. all the mails are downloading to same inbox. please let me the configuration to receive mail in separate
    inbox, sent, draft, etc.. for each accounts

    Hi,
    By default, the Outlook folder list groups similar folders, such as inboxes, from all of your mail and Microsoft Exchange accounts. This feature can make it easier to read all your messages at once, without having to move around between mail folders.
    If you want, you can turn off this feature so that each account and all its folders are separated in the folder list:
    http://office.microsoft.com/en-us/mac-outlook-help/show-separate-inboxes-for-each-account-HA102928387.aspx
    Also, this is the forum to discuss questions and feedback for Windows-based Microsoft Office client, better to post your question to the forum of
    Office for Mac:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • How do I create a new Folder for each test report based on Serial number?

    I want to be able to create a new folder for each test report based on serial number. Each time a UUT is tested, I want the report to go to the appropriate folder. What is the best way to do this?
    Thanks

    Hello Tman,
    This is a slightly tricky question. The reason being, the report options like the report path etc, are set before you see the serial number prompt when you run your UUT. There might be other ways of getting around this, but a quick solution would be modifying the process model.
    I modified the PreUUT callback to set the report options. I passed the reportOptions as a parameter to this sequence. In the PreUUT sequence, I set the following fields:
    Parameters.ReportOptions.GeneratePath=False
    Parameters.ReportOptions.ReportFilePath= "c:\\"+ Locals.SerialNumber +"\\report.xml"
    I hope this would give you an idea.
    SijinK

Maybe you are looking for