New Write up transaction type which can post to Affiliated company

Hi Gurus,
Can you please help me with this request.
I have been asked to create the New Write up transaction type which can post to Affiliated companies copy of transaction type 700.
But i dont see any such option (Posting type) in transaction AO78.
Where as i can see the option in Transaction AO73( Acquisition) and AO68 (Retirement).
Can you please guide me how can i create this transaction type if i can and the reason if i cant.
Appreciate your time and early reply
Regards

OA81 is a general transaction. and AO78 specific for that kind of transaction types.
I think these field are hidden in AO78 for the reason that you can't use Affiliated company.
I never have seen a screen with Write up that you can fill in an Affiliated company.
For me this have only sense for postings between company code's.
You can tray to change the values by using the debugger, but it can give nice other effectslike that it is no longer possible to run the depreciation run when you have used this transaction type. Or it is working now but never again after an upgrade. There is a reason that you can't use these fields.

Similar Messages

Transaction type 180 not possible (no affiliated company specified)

Hi,
I am trying to do the down payment Request in F-47 with Purchase order and asset. When I am trying to do this by giving the Asset number and Purchase order with Item 10. I am getting this error Transaction type 180 not possible (no affiliated company specified). The vendor is also not linked to trading partner and not an affilated company specific.
Please help me solving this issue.
Regards,
Raj

Hi Raj,
If in OBY6, no company ID is defined for company codes, they are NOT affiliated companies and the opposite.
Please check also via OBA7 (document type), if the field "Enter trading partner" is flagged
If yes -> you need to use a transaction type (AO74) which post to affiliatedcompany
If no -> you need to use a transaction type which does NOT post to affiliated
Best regards Bernhard

Transaction type 230 not possible (no affiliated company specified) inABT1N

Dear Experts,
While I am posting transaction through ABT1N i am getting an error message
Transaction type 230 not possible (no affiliated company specified)
Message no. AA389
I checked in the transaction type 230 but here posting to affiliated co tick is their.Please advice at an earliest.
Regards,
Rahul

Hi,
Refer this thread Problum in ABT1N
Regards
GK

Transaction type 100 not possible (no affiliated company specified)

Hi Experts,
At the time of posting asset acquisition in F-90 I am getting following error
Transaction type 100 not possible (no affiliated company specified)
Message no. AA389
I checked transaction type 100 config. there, "Post to affiliated company" is selected
Awaiting your valuable reply.
Regards
Anand

Hi,
check SAPNET note 127650.
Best regards

Transaction type 100 not posible (posting to affiliated company)

Hil
While asset acquistion posting in f-90 ia geting error message "Transaction type 100 not posible (posting to affiliated company)"
can you please give solution for this one

Hi
pl check following settings in spro Img->Financial Accounting-Asset Accouning----Transctions--Acquisitions-Define Transaction Types for Acquisitions-in choose activity window -dbl clk on "Define Transaction Types for Acquisitions"
select transaction type 100--click on details--check posting type. if " Do not post to affiliated company." is selected then choose another transaction type which allows acquisition with option "Post to affiliated company"
regards
Vishwas
Edited by: Vishwas_bapat on Mar 24, 2011 1:24 PM

Need RFC which can post the Goods Receipt

Hi,
My scenario is to post the Goods receipt, by using file and after posting the Goods Receipt i want the acknowledgement whether it is successful or unsuccessful. There is an idoc MBGMCR02 which can post the Goods Receipt but application acknowledgement is not possible in file to idoc scenario, so now i am searching for a RFC so that i can handle this situation using BPM synchronous process. Kindly suggest any RFC or BAPI which can post the Goods Receipt.
Thanks & Regards,
Venkat

Hi Venkat,
As per my understanding this is a "File To (Inbound) Proxy" scenario, in which you can use the BAPI "SD_SHIPMENT_POST_GOODS_ISSUE" to do the PGI into R/3 system.
To perform this, you can go-ahead with the steps as mentioned below:
Source (XI) System:
1. Create the source & target data type in XI.
2. Do required mapping in XI.
3. In configuration directory, use the adapter type "XI" on the receiver communication channel.
Target (R/3) System:
1. Call transaction "SPROXY".
2. Create the interface class (double click on Inbound message Interface, inside your namespace in R/3).
3. Inside the class (proxy), create an internal table to keep all the records which will be coming from XI after your mapping.
4. Pass all the data to above create internal table.
5. Now, call function module "SD_SHIPMENT_POST_GOODS_ISSUE" and pass all required data from ur internal table to this FM (BAPI).
Note: Kindly read about this FM (BAPI) first in SE37 under "Function Module Documentation".
6. Do commit work after calling the FM (BAPI).
I hope this will help you to resolve all your queries.
Regards,
Sarvesh Singh

Transaction type 100 not possible (posting to affiliated company)

Hi All SAP Guru's
I am trying to post asset acquisition through F-90
Asset Dr Transcation Type 100
To, Vendor Cr
while saving the above document i am getting an error Transcation type 100 is not possible (Posting to Affiliated Company)
to explain further my client are using Trading Partner Concept, may be that is the reason document is not getting posted
In Transcation Type I tried to change Post to affiliated Company then system allowing to post the document, but in real sense we should not give post to affiliated company at Transcation Type
can anybody help, is there any alternative to go ahead
Regards
Sreenivasulu
Edited by: sreenivasulu VAS on Feb 26, 2009 1:57 PM

Hi,
When there's a trading partner in the document, you need to use a different transaction type for external acquisition.
Have you tried this? (I've used this one. without chaging document type setting)
150 Acquisition from an affiliated company
Difference from Transaction type 100 is posting type. 150 has a posting type of 'Post to affiliated company' whereas 100 has not.
Check with IMG (T-code: AO73)
Heeseon.

Transaction type ZGC not possible (posting to affiliated company) in ABSO

Hi all,
We have depreciation areas 01, 30, 31, 32 .
dep area 30, 31, 32 inherits the values from 01.
We want to post credit value to dep area 01 after doing the aqusition .
Hence we created a seperate transaction type ZGC ( in aqusitions- Tcode AO73) and limited it to dep areas 01, 30, 31, 32.
Transaction type ZGC is having credit and " do not post to affliated company " radio button is selected.
Now the issue is when we run ABSO to do a credit post in dep area 01 we are getting the below error .
Transaction type ZGC not possible (posting to affiliated company)
Message no. AA390
Diagnosis
For the current document, you specified either implicitly (via the customer/vendor), or explicitly (with a manual entry), that this posting is to an affiliated company. In this case, Asset Accounting requires you to use special transaction types. This enables the system to separately identify such transactions.
Procedure
Check the line items that you have already entered, and the transaction type you entered.
Not sure why it is asking for affliated company .
It will be great if any one help on this why we are getting this issue.

Hi Daya,
Please try to choose Trans.Type 100 in AO73 transaction code and select the radio button Post to affiliated company under Posting type.
Thanks,
Kumar

Looking for BAPI which can post condition records.

Hi ,
I am looking for a bapi which can post the condition records. I need to post Maximum Condition Base Value KONP-MXKBAS along with other fields. I found already one bapi BAPI_PRICES_CONDITIONS which has this field but if I execute
the bapi with BAPI_TRANSACTION_COMMIT it is not posting any data at all. So could any one please help me out of this or if any other alternate BAPI* or any other solution is possible here. But one thing to mention here that LSMW,BDC is not possible to use.
Thanks in advance.
Best Regs
Somnath

Hi!
In most common, standard BAPIs are working correctly.
Here are a the following cases if they aren't:
- standard fault, mostly has a correction note at OSS (very rare case)
- the BAPI is not finishing succesfully. In this case, you always have to check the return table of the BAPI (BAPIRET2, or RETURN, etc...). In this table there is the error. Mostly it occurs due to incorrect customizing settings.
Please check the return table of your BAPI, and you'll find out the problem.
Regards
Tamá

Condition type which can be selected by F4 in PO.

Hi freinds..
once again need ur help!
i have created a condition typeZHDG (m/06) maintained the same in pricing procedure(m/08) , now the problem is while creating PO that condition type automatically fetchs some value and needs to amended each time which is creating problem for end users.
i want , ZHDG condition type should not apear in PO , if user required that condition type they can select that condition type by using F4 in condition tag.
pls help....
regards
Rashmi.

Check the following and see if it helps you:
first go to m/06 and in the condition type enter C for Manual entries.also in m/08 against the condition type maintain the checkbox for manual entry only.
spro@mm@purchasing@enviornment data@define default values for buyer@settings for default values@here either create a new one say Z1 or use the standard one i.e. 01@double click on Z1/01@select Price Adoptation tab@select Do not copy and then save.
now go to SU01/SU3@enter your user id@go to Parameters tab@here enter Parameter id as EVO,value as Z1/01 and save.
Now check by creating a new PO.
regards,
indranil

Transaction types of Budget posting & Budget reservation

Hi All,
I'm working on CRM MDF (Market development fund). I want to maintain Budget posting & Budget reservation in MDF. For this, first I must maintain these two transaction types, but I'm unable to find these two transactions. If anybody knows please do help me.
Thanks in advance.
Regards,
Archana.

Hi Chandra,
The functions in Budget Control System is to support budget planning, budget execution and allow you to monitor the availability of funds.
The budget control system (BCS) in Funds Management is an alternative to former budgeting.
BCS is designed to allow flexible customer-specific adjustments to all important functions. BCS is SAPu2019s strategic budgeting tool.
Please refer the links as mentioned below.
http://help.sap.com/saphelp_47x200/helpdata/en/a6/17f53b9f150248e10000000a11402f/frameset.htm
Also refer following link for assigned values
http://help.sap.com/saphelp_erp60_sp/helpdata/en/6e/ee7d385deb730ee10000009b38f842/content.htm
Regards
Tushar
Edited by: Tushar Vhora on Nov 27, 2008 6:01 AM

How can I make an app with xcode that works like a news app? So that I can post articles on the app. Do I have to use a database or can I connect the app directly with my mac?

How can I make an iphone app with xcode that worrks like a newspaper? So that I can post articles on the app while it is on appstore. Can I directly connect the app with my mac or do I have to connect it to a database? Thanks

Funny, I was thinking you'd want to use the prescribed deployment that Apple went to all the trouble to provide so you wouldn't trot down the garden path with some other implementation, only to find your app rejected with the admonition to use Newsstand after all...
If you're all hot to ignore all that & DIY, why are you even asking...why not just go for it...

Brand new christmas present...which can't read my music fil

I just recieved this product for christmas instead of an iPod, it looks like a very great device.
Unfortunately, I have been using iTunes to play my music instead of Windows Media Player so all of my songs are of the file format: "MPEG-4 Audio File"
when I tried adding them to my Zen Micro Photo, it said that they had to be converted to a correct file format.
If anyone would happen to have a clue on how I can go about converting them, it would be a very large help to me.
(I did not purchase any of these songs online, I just used iTunes to rip them onto my computer.)
Thank you in advance for any help you can offer, the Zen looks great... its just a bit of a paper weight right now because of the incorrect music format.

ugwings wrote:
Hi Mistaken,?There is another way to convert the MPEG-4 files to MP3 within the iTunes software. In iTunes under edit, Preferences, Advanced tab, click on Importing tab and set the "Import Using" to "MP3 Encoder". Once you have done that, you can bring up a playlist, select all, then right click (if you are right handed) and select "Convert Selection to MP3". The iTunes software will create MP3 files of your music in the iTunes directory which you can copy to your Zen.
It won't do this with purchased music from iTunes as that would get round copy protection. PB

ABUMN Intracompnay asset transfer error AA389 Transaction type 300 not pos

Hello,
I am getting the following error message while runinng ABUMN Transaction type 300 not possible (no affiliated company specified) Message no. AA389. Transfer variant 4 (transfer within a company) code is set as follows
Rel Type               Crs-sys.ar     Rel.crsyst area     trans me              retmt tr type   acq.trasn.typ
1                                   *                generic entry              1                        300                 310
2                                   *                 generic entry             2                        300                 310
The problem is that on t-code AO76   trans type 300 Posting type has "Post to affiliated company" and "Post gross" both checked on. In Company Code Global Data my Company code and Company are the same.
Transaction type 306 has posting type "Do not post to affiiliated co." and "Post net" checked on.
I changed transfer variant 4 to have retmt transaction type of 306 for relationship type 1 and 2 instead of 300 and I do not get an error and the posted depriciation is updated correctly.
Since 300 is the recommended SAP setting in note 327088 would their be any problem if I leave it at 306?
Thanks for any answers to this issue.

Hello Murali,
Thank you for your response.
I created a new tranaction type which was a copy of 300 and clicked on
Do not post to affiliated company
Post Net
Since 300 was set up for intercompany and it resolved my issue.
Rgds,
Dan

Multiple values of attributes for Transaction type Bid in the Org Plan

Hello All,
I need to have Multiple transaction types for the Object Bid Invitation in the Org Plan.
As the system is allowing only a single value,I tried maintaining the Table T77OMATTR by setting the attribute 'Tend_type' to take multiple values, but the whole attribute is set to not modifiable!
I am not sure whether I am doing the right thing
Can anybody advise on this please?
Regards,
Nagarajan

Hi
different transactions types, which can be selected in the transaction, are defined in SPRO via
IMG/Supplier Relationship Management/SRM Server/Cross-Application Settings/Define Transaction Types. There you can create new ones as well activate/deactivate transaction types.
The follow on document, PO or Contract, is defined per transaction type there as well.
When you want to influence the transaction type used from Sourcing Cockpit when clicking on "Bid Invitation", this can be accomplished via BADI only in SRM 5.0. Check the BADI section - don't know it by heart.
Cheers,
Claudia

New Write up transaction type which can post to Affiliated company

Similar Messages

Maybe you are looking for