New WRT160N causes TV Interference

I have installed a wireless N WRT160N V3 router and it works perfectly. Only problem is that it's causing double imaging on my TV that is on the other side of the wall. I've moved the router as far away as I can with no improvement. Any settings I can change that might help? I'm out of ideas.

You may certainly try different channel on your Router(not sure if that will make a difference)...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
To change the Wireless channel click on the Wireless tab and tweak the wireless channel, see what channel gives you a Normal image on your TV...
sabretooth is right, just verify if the image is Normal when you Power down your router and double image comes back when you turn your router ON...

Similar Messages

How can i fix this accessory is not optimized for this iphone you may experience noise caused bycellular interference and a decrease in cellular single strenght error in my new iphone4

how can i fix this accessory is not optimized for this iphone you may experience noise caused bycellular interference and a decrease in cellular single strenght error in my new iphone4

Hello abyjohn,
I would be concerned too if the speaker on my iPhone was not working, and if I was getting a message about the accessory not being optimized. I found an article with some steps to take when you are experiencing issues like this.
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M.

Epson Photo R3000 prints as a negative, what is causing the interference?

Hi All
A frustrating morning, new printer arrives (yay!), but now I find my new Epson Photo R3000 prints fine from photoshop but prints come out as a negative image from aperture
I've already turned the printer settings to use colorsync rather than the epson engine for colour management to no avail - I have to assume that there's something in aperture that is being applied that is causing the issue, but just can't see what.
I can't be the first to find this as an issue with a new epson out of the box, Can anyone point me to where i can turn off whatever is causing the interference?
Best Regards
JT

interesting - this got me in the right direction.
Aperture was set to 'black and white', the printer dialogue was usign colorsync to enforce a paper profile generated by i1profiler an and i1io (or an epson profile).
when i set aperture's rendering brick to do it all 'in the printer' it's fine.
Cheers, knew it'd be something dumb!

Opening a new link in a tab (contr+click or right click and open in new tab) causes ff to lose scroll position in first tab or main website, like google.

Opening a new link in a tab (contr+click or right click and open in new tab) causes ff to lose scroll position in first tab or main window, like google.
This does not happen when opening in a new window (shift+click).
It was never a problem in older versions. I now have ff 3.6.17. I' afraid to install ff4 because everytime i do so (install e new version) something i liked dissapears or good add ons dont work anymore!
I also don't like the fact that more and more of the adress barr is beïng used for crap i don't need. I'm a visual handicap and need all the space i can, just to read.
Thanks for helping me out.

To help other users find solutions, please return to this Thread and '''Sign-in''' to the forum with your Username and Password:
click on '''"Solved It"''' next to the reply ABOVE that '''BEST''' solved your question
'''DO NOT click "Solved It" next to this reply

HDMI cable/adapter causing feedback interference in studio monitors

Hi I just bought an HDMI cable/adapter to connect my MacBook Pro to my LCD tv and as soon as I connect my studio monitors through my MBox interface, I got really loud CPU feedback through my monitors. Any suggestions? really trying to have a nice studio set up here lol

Thanks for trying to help me out, rsannie. I had actually figured it out earlier, didn't get a chance to post. Under Sound, click Recording tab, click the device, click Properties, click Advanced tab, uncheck Enable audio enhancements. This was what was causing the interference/feedback type noise.
Just for the heck of it, to get better acquainted with the settings, I went to where you suggested but could not toggle that feature on/off. This feature looks like it deals with the external mic (the ones by the webcam) and not from a source fed through the minijack anyway.
~Paul
Lenovo ThinkPad T410s - 2901CTO
IBM ThinkPad T41p - 2373GGU

HT1937 I recieved new iphone5 cause my old iphone5 had problem. I couldnt send my old iphone5 back cause, Im in military. I know u have to charge, but if i still send my old iphone5, then can i get money back??

Hi,
I received new iphone5 cause my old iphone5 has problems.
I had to send my old iphone5 back, but I couldnt. Cause Im in us military , I had urgent problem in my troops.
So I had to go other state during 2 weeks and I just got back from other state.
I really apologize that I couldnt sent it back.
I knew if i dont send my old iphone back in 10 days, apple s gonna charge 680 dollars.
Now I can send it back to apple my old iphone5.
If I send it, and u guys get back, then can I get my holding money back?? ( just checked my bank account
It was around 680 dollars)
Thanks for sens new iphone5 and I hope to get good news back.
Thanks apple always!

You're not talking to Apple. This is a user forum. We can't answer that question. Contact AppleCare.

The installation of the new system caused the heating equipment and also heating the charger that tease your burning it. and only now discovered that the source of this 60w no longer being sold in BRAZIL had to buy a power 85w.

The installation of the new system caused the heating equipment and also warming the bellman who tease her and burning so now discovered that the source of this 60w no longer being sold in BRAZIL had to buy a power 85w.

The installation of the new system caused the heating equipment and also warming the bellman who tease her and burning so now discovered that the source of this 60w no longer being sold in BRAZIL had to buy a power 85w.

?how do I find emails I have read - new software causes them to disappear

? how do I find emails I have read - new software causes them to disappear

Depends how they were transferred. If you used Migration Assistant, a new user was created. Look there in your documents folder. If you used Setup Assistant, look in your documents folder.

It says I can't open new window cause I have reached max allowed. How do I fix this?

When I try to open a new window, I have a message pop up that says it could not open a new window cause I have already opened the maximim number. Don't understand how this is possible when I am sure I close out each one when I am done with it. How can you fix this?

Yes that is a limit of web some web browsers, they need to close any open browsers windows but without know which browser they have exact instruction is hard,,, mustangman5058 can you supply more information.. Like Cody asked is this a web browser you are speaking of and if so which browser are you using?
Opera Mobile or Dolphin HD allows the most windows to be opened at the same timefor me.

Can't download 'myproduct' to new computer cause not listed under order history

cant download 'myproduct', which is listed as Adobe Design Premium 5.5, to new laptop cause not listed under order history. ordered 9/17/11 and i have serial number.
thank you.

if you follow all 7 steps you can dl a trial here: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
use your serial to activate.
if you see a dl error page, you didn't follow all 7 steps.

New IOS causing weird email issues. Also trying to figure out why mail taking so much room?

Two part question. :I have been trying to figure out what is causing the large amount of "other" in my Iphone memory which has essentially wiped out my 16gb 4s.
After a lot of hunting around, it looks like 6.2 gb is just in my email settings, which seems very high. I do save emails for awhile on the phone, but periodically clean it out and never have had this issue until quite recently. Usually I didn't even notice the "other" part of my memory when syncing.
Second issue--as part of my process, I downloaded the latest IOS (7.0.3) and after I did that, it shows I have 483 "flagged" emails in my mail folder.
I actually have 31. Any idea what could be causing this? Before I downloaded the new IOS, this # was always acccurate, but now this # is way off. Wondering if there could be any tie in to the memory issue?
Also, trying to figure out how to manage the email down to a # that won't take up so much of my memory. Again, it seems like just in the past month my "other" category started to grow, but my email usage and # I save hasn't changed drastically so not sure why it is growing so rapidly.
I have downloaded iexplorer, but can't figure out how to view any possible duplicate emails or issues there? Haven't tried a restore, if I restore will I lose all of the emails on the phone.
Any ideas?

As additional info, when I delete an item from flagged folder, it still shows 483 items aa flagged. Very strange.
Before I downloaded the new IOS, if I deleted a "flagged" item, it reduced the # accordingly.

Every new function causes (not responding), takes a long long time for each operation, everything else on new I7 laptop is fast.

I installed firefox 4 and it starts slow but every function I try causes the term (not responding) on top and it can take several minutes for the function to finish executing. My PC is only 6 mos old with I7 processors, run Panda security software, I did all that your Troubleshooting instruction said to try but still not working correctly.

Hi AquilaXXIII,
What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
update first,
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
Understanding Cluster Validation Tests: Storage
http://technet.microsoft.com/en-us/library/cc771259.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Oss-old version + new update causes MAJOR problems....................

hey all...
if ur experiencing quitting apps, probs w/ itunes7, etc, and u have oss (ANY version), get rid of it immediately.........
the new updated version is even worse than the original.....
goto the uninstaller or delete it with appzapper (if u can get it to stay open...)
gl...............

I have done that, several times.
So this is where I'm at now - last night, immediately after finishing a movie that was on my WD hard drive, which holds all of my media, music, movies - I restarted my computer and then it would not read the drive. It said it was unreadable.
I brought the Mac and the drive into an apple store today - they said basically it was my hard drive causing the issues. I used my iPod classic as my media back up as the 160 gb could hold all my stuff. Well, as I mentioned previously, that can't sync and I restored it, with no success. So in essence I lost my media drive and the back up. Tough to swallow, I'm angry, I think it's still mountain lion causing the drive to fail.
So I resolved to go home and restore my computer to one of my time machine back ups and do a Snow Leopard reinstall. Well, the moment I returned from the apple store, the time machine drive is now listed as unreadable. I called support, spent hours with them - I now have two drives which fried within 10 hours of each other in the same error. The senior support manager agreed it sounds like mountain lion is indeed corrupting my drives somehow. My iMac currently won't start into the recovery disk. So I went out spent $200 to get a new hard drive, which I am now backing up my data onto with a new Time machine.
In the last week, I've lost my iPod classic, iPhone 4, two external hard drives and now possibly even the Mac itself. I'm going to install snow leopard and see if it alleviates any of my issues, or hopefully can read my drives. I truly believe Mountain Lion is the problem.

My new phone will not register my new apple id.. it will only pick up my old id, and I cant do anything to my new phone cause it keeps asking for the password to the old id!

how do get my new phone to register my new apple id when it keeps coming up with old id, but i can reset anything off the old id, cant even restore the phone cause it keeps using the old id!

All content bought using an Apple ID cannot be merged or transferred to another Apple ID.
If you want only to use the new Apple ID, you need to delete all apps, music & books with the old Apple ID and repurchase with the new Apple ID.

How can I make open link in new tab cause tabs to the new tab's left to shift left rather than tabs to the new tabs right to shift right?

When I follow a link in a new tab, the tab opens to the right of the current tab as expected. To make room for the tab on the tab bar, any tabs to the right of the current tab shift right. If there is room for all the tabs on the bar, this behavior is perfect. If however, there isn't sufficient room, some tabs must be hidden to the right or the left of the visible bar. Currently the rightmost visible tab is hidden. This behavior is suboptimal for me because I very often want to switch to tabs on the far right while I very seldom want to switch to tabs on the far left. Is there is a way to cause tabs to the left of the new tab to shift left thereby hiding the leftmost visible tab? Thanks

I'm not aware of a way to make Firefox hide the first tab instead of the last tab; maybe there is an add-on with that feature.
There is a hidden setting to open the new tab at the end of the bar instead of next to the page you're reading. Then, of course, you won't have this problem. Instead, you'll have the problem that it's hard to figure out which tab had that link in it. In case you want to try it out, here's how.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
(3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false (it should turn bold)
You're done here. You can keep it open in case you hate the change and watch to switch it right back. In that case, double-click again to switch it back to true.

New WRT160N causes TV Interference

Similar Messages

Maybe you are looking for