New WRT320N wont keep connection, lags out and needs reboot.
OK so I just installed my brand new WRT320N and its been giving me massive problems.I upgraded from a WRT54G and never had this problem befor. The router seems to lag out. The connection doesnt just die and reboot. It seems that it stalls and lags out. I cant connect to anything. Not the router, not the internet, nothing. Everything just gets stuch in a perma loading state like it wants to load up but it cant.
I have just about tweaked everything inside of the routers settings and nothing seems to make it stop. I have reflashed and updated the bios twice. I have poked around and looked at other posts and tried what was suggested, but none of it has worked. At this point im thinking I have to RMA the silly thing but I am hoping some one might recognize the problem and can help me out.Also, this problem is strictly wired, not wireless. It happens to the master PC where the router has a hard connection.
I am willing to entertain any and all options and suggestions.
Thank you all for you time.
If you need any more info on my rig, its a reply away.
Message Edited by lumpking69 on 07-23-2009 01:47 PM
As you have already Upgraded the firmware of the Router, Have you resetted your router and re-configured all the settings on it again. If not then Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you login to the Router setup page, Below the setup tab you will find MTU, which will be set to AUTO, so you need to change it to Manual and change the Size from 1500 to 1365 and click on Save Settings.
Reduce the Card Speed on your Router. Click on the Start button >>> go to RUN>> type in "ncpa.cpl"- hit OK >>Here(Network Connections) right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure" jaspal button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK.
Now check if you still have the same problem with the router.
Similar Messages
-
When in googlemail firefox keeps connecting dropping out and reconnecting,and crashing.
When in googlemail inbox, Firefox constantly keeps dropping out and reconnecting,(as seen in the tab) and often crashes when one is writing or sending a message.
Try to start Firefox with the about:blank page by creating a copy of the current Firefox desktop shortcut and add a space and <b>-url "about:blank"</b> to the target field.
Try to delete the sessionstore.js file in the Firefox profile folder to prevent restoring the crashed session.
*C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
*http://kb.mozillazine.org/Profile_folder_-_Firefox
The "AppData" folder in Windows Vista and later Window 7+ versions and the "Application Data" folder in XP/Win2K are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders -
Connection timed out and problem forwarded.
Ok im having this problem that i cant download any purchases or make any new ones because the connection times out .So i made all the changes listed on help .Still not solved .So i ran a diagnostic and identified the problem that i can log on to the store but cant 'make a secure connection' to make any purchases .If anyone has the solution to this problem please write it here or make some suggestions .Also i forwarded the problem to apple through the diagnostic and it was written that they would evaluate it .Does this really help and they contact you or something ?Also whats an apple advisor and how to get to them for help ?.Please.....help needed urgently here,im not able to download anything.
My problem is solved now and i realized that this question has been asked many times so i'll write why this session timed out thing happens .Its because of the internet connection .You wont be able to access downloads if all your connection speed is sucked by applications like torrents(even when they are paused) .So shut them and make sure all the bandwidth is available for itunes and try again .Im sure it will work
-
Bluetooth wont keep connection to headphones!
anyone else having this issue? bluetooth wont keep connection to headphones! It works great for anywhere from 20 minutes to 3 hours at a time, then it loses connection, but shows it as being connected on the phone. I have to reboot bluetooth and my headphones and restart any one of the 6 different music players i use.
Hi Go to settings on iPad Reset Network Settings After Reset you need to enter your router wireless key I found that the Router your I S P gives you are not very good I now use a top of range Netgear Router R 6300 bought off Ebay for £70.00 It even works at the top of back garden no problems with iPhone or iPad & Apple TV. Cheers Brian
-
Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working? -
Upgrading to iso 5 and received an error message "the network connection timed out" and fails to complete the upgrade. How do I complete the upgrade?
Try a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
When i was waiting for an hour for itunes to grading my 2nd generation ipod touch to a 4.2.1 and it was about done, it suddenly said the network connection timed out and that made the upgrading a fail. Why does it do that? and what does it mean?
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help
Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/ -
When downloading application updates, which are over a GB, my MacBook Air keeps logging me out and I have to start the download over. I have the power settings set to never turn off, and the display set to never go to screen saver. Any suggestions?
I have the exact same problem/situation since a few days
I have not intalled a program lately.
Any progress Voratima??
Software Mac OS X Lion 10.7.5 (11G63) -
Trying to update to ios6. Download it fully then it finishes and says the connection timed out and tells me to check my network settings. How do I fix this and update my iPhone?
Just what happenede when you signed out and signed back in in Settings>iTunes and App Store? What does "fail" mean?
-
i have photoshop CC and lightroom on my computer for 9.99/mo ...i just purchased a new computer to replace my existing computer and need to know how to download photoshop CC and lightroom onto my new computer using my current account so i don't have to pay again
http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359 -
OLE DB source to connect to teradata and need to send a paramter in query
Hi SSIS gurus,
I am using OLEDB source to connect to Teradata and need to pass a parameter to the query. Ex:
Select * from MyTable where NoOfyrs = 'MyParameter'
VS2010 version, SQL server 2012, Teradata version 14.10
I have tried all the below options and nothing is working for me:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/4818c959-5a7f-43b7-b786-d069a8a67334/using-teradata-net-data-provider-as-data-source?forum=sqlreportingservices
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8602c161-e75a-489f-980d-e5394e1aa9b6/teradata-source?forum=sqlintegrationservices
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/64d59656-93bc-4458-85b3-b79d611e8f18/teradata-source-sql-server-where-clause-in-ssis?forum=sqlintegrationservices
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/a3548020-960d-47c4-aa1a-2ce69cfa1aef/how-to-use-net-tableadapter-query-configuration-wizard-in-vs-to-build-a-query-with-parameter-to?forum=adodotnetdataproviders
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/59787cd3-5d64-413c-93cd-f89621e25a15/pass-query-between-sql-and-teradata?forum=sqlintegrationservices
Kindly suggest how can I proceed.
Thanks and Regards,
2008-2012Hello,
Please refer to the following article regarding passing dynamic parameters to Teradata Server:
http://social.technet.microsoft.com/forums/sqlserver/en-US/f721949f-2300-4ac8-9961-7f2227f352ba/passing-dynamic-parameters-to-teradata-server-using-ssis
If this issue still persists, I would suggest you elaborate your issue with more detail.
If you have any feedback on our support, please click
here.
Elvis Long
TechNet Community Support -
I have had to reset all settings on my iphone 4 because my ablums and contacts keep getting wiped out. not all the contacts.. just the ones ive put in iin the last few months. this is irritating
a-singh wrote:
why dont you put all of your contacts on your sim card ? then if they do get wiped then you can transfer them from your sim to your phone but this is just a way to speed up the process
Not possible.
The iPhone does not save contact information on the sim card. -
Reissue: Connection Timed Out and Airport Admin Utility Issues
I put this post last November, but no one seemed to have a solution to it, so I thought I would try again...
Our lab has and Airport Extreme (802.11g). Intermittently (once a week to a couple of times a day) our airport extreme will stop allowing new connections. Here's what appears to happen. The airport still appears in the the list of networks in the airport icon in the menu bar (ie it still broadcasts SSID), but when I try to connect it whirls for a while and then says connection timed out. If I go to the Airport Admin Utility the base station doesn't appear there even though all of the rest of the ones on our network do (I should at this point, mention that we have both ethernet and WiFi layers on our network--the base station operates as an access point in bridge mode). The only solution is to power cycle the base station. A couple of extra tidbits.
* Base station firmware is current at version 5.7.
* We never have more than about 8 users connected to the base station.
* This inability to connect is independent of what computer is trying to connect and even occurs with iPod touches.
* This problem has occurred for a couple of years (multiple firmware versions).
* I also have similar problems on a network at home that has the new Airport express/extreme N arrangement on a cable internet connection.
* Sometimes this seems to fix itself after 30 minutes or so of just ignoring it. Other times it does not.
* The restoration of the ability of the airport to accept connections after the power cycle is always immediate.
* We only have 6-10 connections, less than the max supported.
* The Airport usually continues to work for those computers that are connected to it before it stops allowing connections.
So couple of questions:
1) Do other people see this problem?
2) Is this some problem with the WAN network connection impairing the ability of the base station to establish WiFi connection that eventually resets itself after something times our or resets?
3) Any suggestions as to what to do about it?Two reasons I don't think that this is likely the issue. Both are based on my assumptions about how noise would affect the working of a WAP. If these assumptions are erroneous, please let me know.
The first is that I have tried both automatic channel selection and manual channel assignment based on an unused channel that was several channels away from other WAPs. Kind of circumstantial since other devices can emit noise in the same region of the spectrum (our phones are 5.8GHz and the microwave is no where near the base station.
The second though, is that I can stand literally a foot away from the base station with my notebook or iPod touch and still have the same problem. It would seem the the noise would have to be enormous to interfere with a device that close the the base station. Also, why would the other connected devices continue to work?
In the interest of providing a complete picture, I would say I have thought quite a lot about whether noise is a problem. This base station is installed in a lab, with lots of electrical equipment whirring away and to make matters worse, the base station itself needed to be installed right next to (Within inches) a circuit breaker box. I winced when I did this.
Interestingly, the thing normally does work and the signal strength & signal to noise (reported by airport utility) and transfer rates are quite good when you can connect.
Thanks,
Michael -
Connection Timed Out and Airport Admin Utility Issues
Our lab has and Airport Extreme (802.11g). Intermittently (once a week to a couple of times a day) our airport extreme will stop allowing new connections. Here's what appears to happen. The airport still appears in the the list of networks in the airport icon in the menu bar, but when I try to connect it whirls for a while and then says connection timed out. If I go to the Airport Admin Utility the base station doesn't appear there even though all of the rest of the ones on our network do (I should at this point, mention that we both ethernet and WiFi layers on our network--the base station operates as an access point in bridge mode). The only solution is to power cycle the base station. A couple of extra tidbits.
* Base station firmware is current at version 5.7.
* We never have more than about 8 users connected to the base station.
* This inability to connect is independent of what computer is trying to connect and even occurs with iPod touches.
* This problem has occurred for a couple of years (multiple firmware versions).
* I also have similar problems on a network at home that has the new Airport express/extreme N arrangement on a cable internet connection.
* Sometimes this seems to fix itself after 30 minutes or so of just ignoring it.
* The restoration of the ability of the airport to accept connections after the power cycle is always immediate.
So couple of questions:
1) Do other people see this problem?
2) Is this some problem with the WAN network connection impairing the ability of the base station to establish WiFi connection that eventually resets itself after something times our or resets?
3) Any suggestions as to what to do about it?Yes, I have the exact same problem.
It's intriguing because I share the connection with my landlord who is often away. The base station is connected in his suite and we seem to never have any problem when only my wife and I are connected on it. I use a iMac 21.5" and my wife a 13" White MacBook (5.2). When he is home (about 1 week per month), that's when the connection will randomly disconnect exactly as you described. He uses a iMac 24" and occasionally an old iBook.
Maybe you are looking for
-
Any Suggestions for a Loud Fan?
i've got a Dual 1.25 Ghz G4 Power Mac, It works great except in the last 6 months or so the fan noise has gotten extremely loud. Also I started noticing that when a CD came out of the CD drive it was very warm, almost hot to the touch. Any suggestion
-
can someone please help? thanks
-
New Features/Ideas for FLASH related work?
Let's see....I know there are always new cool and money making features and ideas floating in our industry. I am looking for this kind of ideas. The goal for me is to maximize utilization of Interactive team and bring more revenue. No different from
-
Function module to execute the program in the background.
Hi Experts, I have two reports i am calling report2 from report1. Here the problem is i wanted to pass the input parameters using the "submit" statement and i wanted only one field value from the report2... whcih is used in report1 and i dont wa
-
Change material type - vendor stock
material A is setup as semi-finished but it should be finished. unfortunately vendor stock exists so there is an error when using MMAM. how can you change the material type to a finished good? i think there was a oss note explaining how to tempora