New X-Fi Driv

Is it just me, or a Creatve's Driver Development team taking the p!ss?
After looking through the forums for quite some time now, I have seen many threads relating to the same thing, yet all you get in reply from the CL mod's is either:
It's on it's way</LI>
It's been delayed</LI>
It's under internal testing</LI>
Or some other bullsh!t</LI>
May be if they stopped putting so many resources into creating un-needed stuff, for example, the spangly Creative X-Fi splash screen, then perhaps, just perhaps, they might actually get something out the door.
I mean, dam, I though NVIDIA were bad, but Creative are right up there with them.
Any mod or customer have any opinons or information?

Andy what are you a ati fan? If you look at benchmarks, (hardocp, maximum pc, tom's hardware etc) you will see nvidia always have faster fps, and better prices. Ati was kicking nvidia but up until the 9800. After that nvidia came out with the 6800 series. Since then Nvidia has had the crown. Ati take forever to come out with their catalyst drivers. Nvidia updates are frequent and you know it. Also ati have to many issues with crossfire. You have to play Fear with certain settings or it will mess up etc. I dont know how you are judging nvidia, but I can tell that you dont talk about ati short comings which nvidia does alot better job.Message Edited by General348 on 05-8-2006 02:54 AM

Similar Messages

I have moved all my songs onto a new external hard drive but it has wiped my iPod clean. Although when I connect my iPod it's starts teh process of sync'ing - so many songs in I get a pop up advising the siong could not be read or written to?

I have moved all my itunes onto a new external hard drive to free up space. It has wiped my ipod clean! I can still see the itunes on the new hard drive so I restored my iPod and tried to sync. Although when I connect my iPod it's in the process of syncing, so many songs in I get a pop up saying could not copy to my iPod as xyz song title could not be read or written. I click ok for this pop up to dissapear and then another pop up appears saying could not coyp to iPod because of unknown error.!!! Help I'm going crazy.

Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location. Select the location of your on external hard drive.

I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died. Fortunately I've been using Time Machine to back up to a 2nd external drive. How do I restore my libraries to a new external hard drive?

I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died. Fortunately I've been using Time Machine to back up to a 2nd external drive. How do I restore my libraries to a new external hard drive?

This is a tricky one.
Open up Time Machine and go back to a date using the timeline on the right side of the window when you know the drive was working and was backing up as part of Time Machine backups.
Click on the name of your Mac under the Devices heading on the left side of the window in Time Machine, and if things are working correctly you will see Macintosh HD (or whatever you have named it) and the name of the external hard drive that was backing up in the past.
Right-Click on the name of the external hard drive and then click on "Restore (name of drive) to....." You may be asked for your adminstrator password at this point.
It might be easier to restore the drive contents to your desktop if you have room on your Mac, and then copy things over to the new external drive where you want to store the Aperture and iMovie Libraries.
Once the libraries have been moved over the new external hard drive, you will likely need to "point" Aperture and iMovie to the location of the libraries on the new external hard drive.

Problem installing Mac OSX on my new MacBook hard drive...

Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)

Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies,

I bought a new external hard drive for backups, but time machine won't do a full back up. I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?

I bought a new external hard drive for backups, but time machine won't do a full back up.
I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?
When I bought the new (used) iMac, I also bought an external hard drive for backups. It worked fine, but my husband stole it.
Then I bought a new external hard drive (Seagate) and it worked fine for three weeks, then died.
So I just got a new external hard drive, which was put together from an internal hard drive and a hard drive enclosure.
Time machine did the first backup today, and it should have taken 9 hours like it did on the previous first time full back up. Instead, it took 30 minutes. That can't be right. I want to start over and do a full backup to make sure everything gets onto my new external hard drive, but I can't figure out how to do that. Please help.

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

I move all photos to a new external hard drive. Now all folders have a question mark in them. How do I find ALL PHOTOS at one time instead of having to find each picture. I have about 30,000 photos. Using Mac. LR5

I have set up a new external hard drive and Im trying redirect LR to the new hard drive. I have over 30,000 photos and Im trying to see to see if there is a way to all photos located without having to go thru each folder at a time

http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
See Figure 4

How do I copy an iPhoto library, which is on an external hard drive, onto a new external hard drive?

I'm running out of space on my external hard drive, so I was advised to buy one with triple the amount of space. So, I need to copy my current iphoto library, which is on an external hard drive, onto a new external hard drive. I thought I could just drag and drop it in, but that doesn't seem to be working.

Make sure the external drive is formatted MacOS Extended (Journaled) and then drag the iPhoto Library to that drive using the Finder.
Then double click the library in its new location to open it in iPhoto. Test it thoroughly, if it is working, before deleting the original library on the internal drive.
To check the format of the drive, see (it says Aperture, but the same applies to iPhoto): Format external drives to Mac OS Extended before using with Aperture
iPhoto: Issues with FAT32-formatted drives

How do I clone my boot volume to a new internal hard drive?

Hi,
I record HD shows from my digital antenna using EyeTV 500, not to mention producing DVDs from my 8mm and miniDV home movies. I seem to be eating up disk space at an alarming rate.
Does anyone have a general solution to storing large amounts of video?
My current setup is:
Original Internal HDD--250GB Maxtor "6Y250M0"
Second Internal HDD--500GB Maxtor "6H500F0"
External Firewire HDD--1 TB LaCie Big Disk Extreme "LUN 0"
I've just bought a new Hitachi 1TB DeskStar SATA Drive (for the amazing price of $359 after a $30 rebate at OWC: http://eshop.macsales.com/item/Hitachi/OBD0A34915/). I plan to remove the original 250 GB drive and install the new Hitachi 1TB drive in that bay.
My preference would be to make the Maxtor 500GB drive my new OS and Applications drive and the new 1TB internal drive my primary media drive. I should have room to clone the original 250GB drive to the second internal Maxtor 500GB drive, then swap out the 250GB drive for the new drive.
The System folder is only 1.64 GB, the Library Folder is 11.9 GB, and the Applications Folder is 7.09 GB. The Current boot drive (250GB) has a capacity of 233 GB, with 139.09 GB used and 94.65 GB available.
The specific questions I have are:
1) If I clone the current boot drive (250GB) to the 500GB Maxtor Drive, do I have to clone it to a partition the same size as the original (250GB), or, when I Restore using disk utility, will it just become a 500 GB volume?
2) Is it better to put the System, Apps, and Library in their own Partition, as opposed to having them share the same volume with a lot of other files?
2) ...if so, how do I calculate how big a partition I'll need for the system and apps on the Maxtor 500 GB drive?
3) What's the best way to do all this? What pitfalls do I need to watch out for?
4) I plan on upgrading to OS 10.5 (Leopard) when it comes out next month. (Does this change anything?)
Thanks!
Ashwin

The very best way to clone one drive to another on a Mac, is to use a simple utility called Carbon Copy Cloner. It is available online, free as a download. Just google for Carbon Copy Cloner, download it (2.2 mb), and use it. It is really great and you will be happy with it.

How do I transfer an existing Aperture library to a new external hard drive

I have a new external hard drive where I want to store my pictures to free up room on my iMac
How do I take an existing Aperture library and move it to the external hard drive so that Aperature can find and use it? Once it is moved can I delete the library from my iMac without causing problems with my new hard drive library?
thanks

Hello Barty,
is your library referenced or managed?
If your Aperture Library is managed, then you can simply copy it to your new external drive using the Finder. Make a backup of your old library and convince yourself that the backup is working.
If your library is referenced, then use Aperture to relocate your master image files to the external drive (select all images, then File -> Relocate Master), then copy your Library to the external drive using the Finder.
To point Aperture to the new library location, double click the new Aperture Library to open Aperture with it. Test it thoroughly, before you delete the original library.
You might consider only to relocate the master images to your external drive and to leave the then much smaller Aperure Library on your system drive. That way Aperture will work faster, and you will be able to browse and share your images, even when our external drive is not connected.
Regards
Léonie

How do I reboot my Macbook pro 2011 to a new internal hard drive?

I had to get a new internal hard drive and I can't afford to pay some one to do it for me. So I was wondering how do I install the operating system on to the hard drive?
Thanks

Since we don't know which MBP you have or what OS was initially installed on it, try this. Start up the Mac and hold down the Command and "R" keys. If you have an internet connection and if the MBP came with Lion installed, you should be able to boot into Internet Recovery. From there, you can download Lion from Apple's servers and install it. That's assuming the new HD has already been installed and formatted (you can format it yourself using the Disk Utility that's available in Internet Recovery).

Getting my backed-up photos into iPhoto on the new external hard drive

I managed to use Time Machine to restore the back-up of my external hard drive (that died) to a new external hard drive, however, while I can see the .jpeg images that were in my original (ext. hard drive) iPhoto library on the new Passport Drive, they are no longer set up in an iPhoto library. I might have confused the system because I had thought I needed a shell structure iPhoto library on the new hard drive, so I basically moved the new "budding" iPhoto library established on my iMac's internal hard drive to the Passport drive before restoring the Time Machine backup. What I see now is 1. a 4GB iPhoto library existing on the internal drive. 2. an identical 4GB iPhoto library existing on the external Passport drive and 3. a folder named Simpletech with the entire contents of the failed hard drive including all the photos from my original 54GB iPhoto library that resided on the old external hard drive, which are accessible as independent .jpeg files, but no longer organized as an iPhoto library.
Would love to know the steps to having just one iPhoto library on the Passport external hard drive that contains all my images without accidentally losing/deleting any images and messing up pointers. I would not mind eliminating the iPhoto library on the internal hard drive either, provided I could get all the images into the main one.
Angie in Charlotte

while I can see the .jpeg images that were in my original (ext. hard drive) iPhoto library on the new Passport Drive
When you enter Time Machine and go to the Pictures folder do you not see the iPhoto Library in it at different dates?
Click to view full size
If you used Time Machine to backup your hard drive then the iPhoto Library package should be in it. If you did something different please explain in detail what you did.
OT

I installed a new bigger hard drive and now spotlight does not work with outlook to search for emails

My old hard drive was full so I went to an apple authorized provider to install a new bigger hard drive. They also moved the data and applications from my old drive to the new one. They did not use time capsule because their way was faster. After the installation I did have to reenter the product code key for Office 2011 for the Mac. However, now I find that I cannot do email spotlight searches in Outlook. When I put in the search - it comes up with no results. This is true no matter what the search. Any ideas of how to point spotlight to look in the email folders so I can do searches again. This is a feature I use daily - so I am concerned that I have lost this feature. Also, I am noticing that alot of the settings did not carry over to the new hard drive. Any help is greatly appreciated!

I would recommend starting over and migrate using your Time Capsule backup however DO NOT do it wirelessly, connect using an Ethernet Connection. If you upgraded to Lion from Snow Leopard then follow the instructions in this video, the kid is annoying but he knows what he's doing. Clean Install Of Snow Leopard video. Once you have installed and updated Snow Leopard then update using the 10.6.8 Update Combo, then log into the Mac App Store and re-install Lion and all it's updates. My guess this is an afternoons work.

External hard drive that had my itunes on it crashed; had to recover data on new external hard drive; not can't access iTunes from my iMac - how do I name it correctly in order to make iTunes work again

how do I set up a new external hard drive with my recovered iTunes (from a hard drive that crashed & had to be replaced) so that I can access iTunes on my iMac again?

Take a look at this link, http://support.apple.com/kb/ht2519

Importing FROM external hard drive to new internal hard drive

How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?

lksj wrote:
How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?
assuming you moved the whole iTunes folder to your new internal HD, try this:
launch iTunes with the options key pressed. this window will appear
click +choose library+ and navigate to the _iTunes library file_ on your internal HD.
any luck ?

Will a new 320gb hard drive work on a mac book pro 3,1

purchased new 320GB hard drive for a mac book pro 3,1. Old HD has link speed of 1.5GB, new HD transfers at 3GB. New HD will not boot up. Can link speed be changed on mac book pro 3,1.

Have you already initialized/partitioned the new drive? If yes, you've installed the operating system on it, and it doesn't boot? You've tried a safe-mode boot (hold the shift key when booting)?

I want to buy a new external hard drive.

I want to buy a new external hard drive, I have an iMac now, I most likely will buy a mac pro this winter. I want to buy a hard drive that will be able to handle the highest quality video, AND work with my iMac now. Thanks
Andrew

And finally:
Make SURE you format the drive as Mac OS Extended, journalling optional but recommended.
Disk Utility Help: Erasing a disk or volume
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1009.html
In step 4, DO choose Mac OS Extended (Journaled).
WARNING: All your currect files will be erased.

New X-Fi Driv

Similar Messages

Maybe you are looking for