New X1 Carbon DRIVER_POWER_STATE_FAILURE Blue screen error

Just got my new X1 Carbon (20A7-CTO1WW) for less than a week, experienced a blue sceen error of death today. System is running the pre-loaded Windows 7 Professional. System has been updated with all latest drivers and BIOS.
Using BlueScrrenView, the following are relevant information relating to the error:
Bug Check String: DRIVER_POWER_STATE_FAILURE
Bug Check Code: 0x0000009f
Parameter 1: 00000000`00000003
Parameter 2: fffffa80`0a114bf0
Parameter 3: fffff800`00b9c3d8
Parameter 4: fffffa80`18580150
Caused By Driver: ntoskrnl.exe
Caused By Address: ntoskrnl.exe+75bc0
File Description: NT Kernel & System
Product Name: Microsoft® Windows® Operating System
File Version: 6.1.7601.18409 (win7sp1_gdr.140303-2144)
Processor: x64
Crash Address: ntoskrnl.exe+75bc0
Can anyone assist?
By the way, tried to install Microsoft hotfix 355256 but message shows the fix was already installed. So the error occurred while the fix was installed in the system.
Thanks in advance.

HERE'S WHAT THE BLUE SCREEN SAYS.
A problem has been detected and windows has been shut down to prevent damage to your computer.
DRIVER_POWER_STATE_FAILURE
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware of software is properly installed.
If this is a new installation, ask your hardware of software manufacturer
for any windows updates you might need.
If problem continue, disable or remove any newly installed hardware
or software, disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advance Startup Options, and then
select Safe Mode.
Technical information:
*** STOP 0X0000009F (0X000000000000003), 0XFFFFFA8006016050, 0XFFFFFA8006016050, 0
XFFFFFA8005860010)
Collecting data for crash dump...
Initializing disk for crash dump...
Beginning dump of physical memory.
Dumping physical memory to disk: 100
Physical memory dump complete.
Contact your system admin or technical support group for further assistance.

Similar Messages

BLUE SCREEN ERROR FOR A BRAND NEW DELL STUDIO

Hi There,
I Just bought a brand new Dell Studio laptop from Best Buy and the first login.. was trying to register my Mcfee AV on it and started dumping the physical memory with blue scree.. So sad.
I had Win7 on it. What could be the issue? Can someone help here?
I have another thing to know, I want to replace this one with a diff. Studio laptop which is available in best buy, I want to avoid the 15% restocking fee. The one I am thinking to replace it with is of light brown color in the Dell laptop link on best buy site on page 2 and this one is a bit costlier than the one I am using it.... Can I replace this one without any restocking non-sense as the current one keeps throwing with blue screen error. Although it doesnt happen everytime i use it but it does come up with blue screen every now and then...
Any suggestion would be appreciated. The Laptop which I currently have is not listed in the Best Buy site now, was there till last week. Dell Studio, i3 processor with 500GB HD & 4 GB RAM.
Thanks,
-Rj

You're over thinking this! If you're getting an error of this type and you didn't do anything to the machine besides install McAfee, then bring it to your nearest BestBuy to have Geeksquad look at it or have it returned. You're within the 30 days, right?
There is no restocking fee for defective items. I'm not sure if yours is defective, but speak to the store, I'm sure you will be pleased. Point is, do it now, before more time passes.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Blue screen error c824C1500 on HP Photosmart All-in-one series C5580

A blue screen error c824C1500 appears on my HP Photosmart All-in-one series C5580's display when I turn it on. I have gone through the basic troubleshooting solution and it give me the same error message when I plug the power cord back in. Any other solutions? Thank you.

You probably need a new printhead or pump. Either is financially prohibitive vs. a new printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Satellite P20-771: Blue screen error message after OS reinstalling

I have a laptop Satellite P20-771 / Pentium 4 3.40GHz (800/HTT) / XP Home/ 17' with nVidia Geo5700 driver.
As I had some problems with software, and I reinstalled everything using the provided CDs. Unfortunately the computer keeps malfunctioning giving me blue screen errors, that are due (this comes out when I sumbit the error to Microsoft) to device drivers. I updated everything (I hope) from the Toshiba page, but I am not an expert and I am worried that I missed something or that something has not been loaded in the right order or that the setting are incorrect.
Thank in advance for your help
Roberto

Hello
I have also P20 (red one) and have never had any problem after using provided recovery media. According to your posting there must be two possible reasons for blue screen:
1. you have installed some additional software that causes bluescreen or
2. there is some hardware component responsible for that (new memory module or maybe some external device connected to the unit)
Sorry but I dont see any other reason. On this way it is not easy to give precise answer and we can just speculate why this happen.

Satellte L40 - After XP Setup blue screen Error

Hi,
I browsed this forum and the net and I did not find an answer, so:
I'm downgrading from Vista to Win XP on Satellte L40 (PSL48E), I created new WinXP SP2 with nLite with the AHCI drivers,
looked ok win xp setup recognized the HDD so i deleted the vista partition I created new NTFS partition Setup copied the files
and when it restarted for the first time:
I got blue screen error STOP 0x0000007E which suggest it may be BIOS incompatibilty, a post in this forum had resolved by using XP SP2, but I'm already using Install CD with XP SP2.
Now, BIOS for the model PSL48E comes only for windows flashing. and I have no Windows on my system.
Even if I reinstall vista again and flash it with XP compatible bios I'm afraid I might loose vista compatibiliy (if XP dosn't work after all)
and it will render my system useless.
Help please.

Here you will find a manual on how to install XP on an L40
Regards
JBJ

A blue screen error and suddenly shutdown on my Sat M70

i have a M70 laptop i buy it just 3 weeks ago. i start facing the following problems
- system exhibit blue screen with an error message that i do not understand ( ) just when i slightly move my laptop or even when just changing the screen angle!!!!!!!!!!!! ( sometimes with a stange noise from the right highspeaker)
- sometimes the screen shutdown but the system is usually running ( i can hear noise and LED is brightning)
i am recognizing your help and interest

Hi
Usually if the Blue Screen error message occurs, so it could be a serious software fault or a hardware malfunction.
There is no generally solution for this problem. In my opinion you should check, if the software is responsible for this malfunction.
Try to install new OS or recover the unit with the delivered recovery CD.
Maybe this will solve the problems.
If not so it must be something wrong with the hardware. You should contact the Toshiba service. He can run some diagnostic test and you will get a detailed answer what its wrong.

Blue screen error after USB connection

hello, I have a new 8100. All is great, all is working, but the problem appeared after I installed the software and I connected the mobile to the computer by USB... the blue screen error of Windows Vista appeared and then
after the automatic reboot of my computer
it said the following mistakes:
"Firma con problemas:
Nombre del evento de problema: BlueScreen                        ( name of the problem )
Versión del sistema operativo: 6.0.6000.2.0.0.768.3             ( OS version )
Id. de configuración regional: 3082                                    ( regional configuration ID )
Información adicional del problema:                                    ( aditional info on the problem )
BCCode: 4e
BCP1: 0000009A
BCP2: 0003EA16
BCP3: 00000006
BCP4: 00000002
OS Version: 6_0_6000
Service Pack: 0_0
Product: 768_1
Archivos que ayudan a describir el problema:       ( files which help to describe the problem )
C:\Windows\Minidump\Mini010609-03.dmp
C:\Users\antonio\AppData\Local\Temp\WER-110323-0.sysdata.xml
C:\Users\antonio\AppData\Local\Temp\WER6C68.tmp.version.txt
Lea nuestra declaración de privacidad:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0c0a
I hadn't anything wrong with my Vista OS before
thanks in advance
Solved!
Go to Solution.

Hi and welcome to the forums!
I don't read Spanish very well, but did you leave the Blackberry plugged in when you
rebooted the PC? Vista might have tried to used the BB as a drive for error checking or system functions.
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Blue Screen Error after Synching

I had Blackberry Desktop Manager 7 installed on my WIndows XP machine...I have been getting Blue screen errors frequently after my Outlook is synched wiht the device..I was on BDM 6 prior to this and used to consistently get Blue Screen Errors. I used to think there was some other issue with the laptop until recently when I got a new one and I installed The desktop manager.
Once i realised that, I uninstalled the Software from my desktop yesterday but I read a lot of blogs that said that the BSOD will continue to come as your normal uninstalls are incomplete..Could you let me know how this can be fixed? Do you have a stable version of the desktop manger that doesnt give a BSOD?
I need to sync my device with Outlook everyday..and I cannot afford BSOD's everyday..

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
BSOD's are actually more rare of a problem, from what I've seen, and often indicate something more core wrong with the actual PC, Windows installation, or something else...and the RIM Desktop Software is simply revealing this deeper flaw rather than being the cause of it. In the worst case scenarios, I've actually heard of folks doing a clean rebuild of their PC (e.g., reinstalling Windows from scratch) and that rectifying the problem.
Ohhh...one last thing:
jinugeorge wrote:
Do you have a stable version of the desktop manger that doesnt give a BSOD?
FYI -- From the wording, I suspect you are misunderstanding the purpose of these forums. This is a user-to-user community, not a user-to/from-RIM channel for any communication whatsoever. So, by "Do You", you are actually asking that of other users, "out there", just like you who happen to be volunteering time to help others out.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blue screen error while trying to install windows server 2003 in Lenovo G500s essentials Notebook

Hi,
I bought a new lenovo G500s essentials note book. It's a freedos system. I am trying to install windows server 2003 in it. But I am getting blue screen error . error message like ths,
Technical Information:
STOP: 0*0000007B (0*FFFFFADF2CE323C0, 0*FFFFFFFFC0000034, 0*0000000000000000, 0*0000000000000000)
Can someone please help.
Regards,
Priya.
Solved!
Go to Solution.

I don't have a similar machine to look at so this is a bit of a guess:
Per page 30 or your user's guide http://download.lenovo.com/consumer/mobiles_pub/lenovo_g400sg400stouchg500sg500stouchg405sg505s_ug_e...:
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1 Shut down the computer.
2 Press the Novo button and then select BIOS Setup
There should be a tab labelled something like "Configuration" and on that page something like "SATA controller mode". Select "compatible" and save and exit.
I'm not certain this will fix your problem, but it's worth a try.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Blue Screen Error Please Help.

Hello ... i m getting this error when ever i start my pc Multiprocessor_configuration_not_supported... this error came when my system finished booting then eventually this blue screen error occured and i needed to restart my computer .. after restarting
this error gone and my system runs fine.... i want to ask why i always get this error at the very first time when ever i start my computer... i have windows 7 professional 64bit and Intel Xeon 5160 3.0 GHZ dual processors 8 gb ddr2fb ram.....i updated my bios
also but it wasn`t effective..
please help..

Please post a copy of your dump file as a shared file to your Sky Drive with a link here.
The dump file will be created at c:\windows\minidump. You may need to change your settings in Windows to be able to see the file. To show hidden files type Folder Options in the search box above the Start button and select View,
Advanced Settings and verify that the box before "Show hidden files and folders" is checked and "Hide protected operating system files" is unchecked. You may need to scroll down to see the second item. You should also make certain that the box before "Hide
extensions for known file types" is not checked.
What is your computer make and model? If not a branded computer what is your motherboard make and model?
Please download and run Driver View and upload a copy of the report it produces to your Sky Drive. To get a report on all drivers select Edit, Select All followed by File, Save Selected Items.
http://www.nirsoft.net/utils/driverview.html
Please provide a copy of your System Information file. Type System Information in the Search Box above the start Button and press the ENTER key (alternative is Select Start, All Programs, Accessories, System Tools, System Information).
Select File, Export and give the file a name noting where it is located. Do not place the cursor within the body of the report before exporting the file. The system creates a new System Information file each time system information is accessed. You need to
allow a minute or two for the file to be fully populated before exporting a copy. Please upload to your Sky Drive, share with everyone and post a link here. Please say if the report has been obtained in safe mode. The request for a copy of this file is additional
to answering the question about make and model.
For help with Sky Drive see paragraph 9.3:
http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm
Hope this helps, Gerry

Blue screen error after updating to iOS8

After I updated my OS to iOS8.0.2...... I am getting a blue screen error again and again.
WHenever I will be using any application or opening any new application suddenly it will close with a blue screen.Then iPad restarts By itself.
PLease suggest.

Hi Chinmayee,
If your iPad is restarting unexpectedly, I would suggest that you troubleshoot using the steps in this article -
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
Thanks for using Apple Support Communities.
Best,
Brett L

Blue screen error 1e on windows server 2008 r2

Hi Friends,
Please help me, I am facing with blue screen error 1e, Kindly help me to fix this issue,
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7601.2.1.0.274.10
Locale ID:   1033
Additional information about the problem:
BCCode:   1e
BCP1:   0000000000000000
BCP2:   0000000000000000
BCP3:   0000000000000000
BCP4:   0000000000000000
OS Version:   6_1_7601
Service Pack:   1_0
Product:   274_3
Files that help describe the problem:
C:\Windows\Minidump\112914-22651-01.dmp
C:\Users\Administrator\AppData\Local\Temp\WER-73289-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi ramesh84,
Please updating to latest BIOS, latest drivers, particularly to NIC driver（Base on my experience)and
monitor the server for the next reoccurrence of the issue. If you install any new application or install any update please uninstall them first for the troubleshooting. Because we need to analyze the crash dump file to narrow down the root cause of the issue.
Unfortunately, it is not effective for us to debug the crash dump file here in the forum. I would like to suggest that you contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope the issue will be resolved soon.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Blue Screen Error in Windows 7

Hi .
I've been experiencing blue screen error in these past few days. Please help me out.
the error i'm getting is
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 50
BCP1: FD7FADFC
BCP2: 00000000
BCP3: 97BD1BCA
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\033014-24741-01.dmp
C:\Users\Fashion Details\AppData\Local\Temp\WER-47720-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi,
This indicates that invalid system memory has been referenced.
For more information, please refer to the following article:
Bug Check 0x50: PAGE_FAULT_IN_NONPAGED_AREA
http://msdn.microsoft.com/en-us/library/windows/hardware/ff559023(v=vs.85).aspx
If it doesn't help, please collect Minidump files and upload to OneDrive.
=================
1. Click "Start", input "SYSDM.CPL" (without quotation marks) in the “Search” bar and press “Enter”.
2. Switch to the "Advanced" tab and click the "Settings" button under "Startup and Recovery".
3. Under "Write debugging information" section, make sure the "Small memory dump (128KB)" option is selected.
4. Make sure "%SystemRoot%\Minidump" is in the "Small dump directory" open box and click “OK”.
If the system crash again, please refer to the following steps to collect memory dump files:
1. Click “Start”, type “%SystemRoot%\Minidump" (without quotation marks) in “Search” bar and press “Enter”.
2. Go to your Desktop, right-click on it and create a new folder named "Dump".
3. Copy all the memory dump files (looks like [Mini092008-01.dmp]) in Minidump to this folder.
4. Right-click on the Dump folder, click "Send To", and click "Compressed (zipped) Folder".
5. Upload to OneDrive.
Karen Hu
TechNet Community Support

Blue screen error while instaling.

Hy
I get the blue screen error when i install the flash player.
Windows 7 32 bit
Firefox 16.0.1 32 bit
I had the older flash version but i removed it tryng to solve the problem but no succses.
This is the version i try to install
11.4.402.287
i dont remember the older one.but it was making updates every time a newer version was coming.
This is the error
Problem signature:
Problem Event Name:    BlueScreen
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    1033
Additional information about the problem:
BCCode:    d1
BCP1:    01000018
BCP2:    00000002
BCP3:    00000000
BCP4:    82221031
OS Version:    6_1_7601
Service Pack:    1_0
Product:    256_1
Files that help describe the problem:
C:\Windows\Minidump\101312-16005-01.dmp
C:\Users\Silviu\AppData\Local\Temp\WER-25896-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hello pleurisy,
Your system is getting an error when trying to play a game.
This might be caused by the system getting too hot.
Do a hard reset.
Turn the computer off.
Remove the power cable and the battery.
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
As you turn it back on tap the F10 key. This will load BIOS setup utility.
Press F9 to load defaults.
Press F10 to save and exit.
When the computer boots back up, check to see if everything is working.
If your still getting the error, go to HP.com and update the BIOS.
Here is a link to the update.
Also make sure that the system does not have a buildup of dust inside the system.
Take the side panel off and clean the inside of the computer with compressed air.
Let me know how everything goes.
Have a good day.

Blue screen error 1gdpmd64.sys

I have a hp pavillion g7 notebook computer which keeps getting a bsod crash each time internet graphics are accessed. i have researched the error code and it seems to be a graphics driver issue. I downloaded a new version of the amd graphics driver from the hp website support and i tried to restore the computer to a previous point in time when the bsod was not occuring. All to no avail. the webpage graphics are not able to be displayed and the blue screen error keeps returning. In the device manager section of the computer, none of the icons are showing issues and i can't figure out what could be causing the problem. Any suggestions would be greatly appreciated. thanks

Hi beold,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are suffering from a BSOD. Can you provided more information on the error message that you are getting? Have you tried a different browser to see if the same error occurs. What is your product number? What operating system are you using?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

New X1 Carbon DRIVER_POWER_STATE_FAILURE Blue screen error

Similar Messages

Maybe you are looking for