New XFi Platinum ser

Hi when are the "NEW; Xfi platinum titanium series being released,not the "fatality series"
Thanks Robert
Message Edited by freakn0de on 06-0-2008 0:3 AM

Make sure you download the drivers for the 64 bit version of Windows XP

Similar Messages

XFI Platinum and Windows 200

Hi there,
Im looking forward for a new XFI Platinum or Elite Pro but in the system requirements only appears windows XP; I have windows 2000 installed and dont wanna change to XP, has anybody an XFI soudcard working with Windows 2000? Is it working ok? Any kind of latency in sounds and recording audio or Midi?
Please write me to [email][email protected]][email protected][/url]
Thanks in advance

Headsets or microphones with a USB connection cannot be connected to the input connections on a sound card directly. Instead, they must be connected to a USB port on a PC.
They are treated as a separate audio device by Windows. They will be listed as a separate audio device in Device Manager as well as in Windows Multimedia panel. To adjust the volume of the headset or the microphone, use Windows Volume Control.

Problem with XFI platinum fatal1ty sound from panel but not from c

Hi
I just got an XFI platinum fatalty card with front panel, I have only been able to get sound out of the ports on the acctuall card for about 3 minutes then it screetched and went off. Since then the most I can get is an EXTREEMLY quiet (I need to turn up my speakers and the card volume to full) and distorted sound from my center and rear left speaker (5. set). However the wierd thing is when I plug in the headphones into the front panel it works perfectly, the thing is if i switch it back to speakers i have to restert before the headphones will work again.
I have tried to update the drivers but there are no newer ones, I figure I have it seated correctly or I would have no sound from the panel, I just dont know what to do.
its plugged into a Asus Crosshair nForce 590 SLI AM2 Motherboard, I have tried it in 2 different PCI slots and nothing changes, I'm running XP.
Help please, it would be much appreciated, I went through hell to get this card deli'vered and not its not working properly!!!
Any ideas?Message Edited by C4TS on -09-20072:42 AM

Is there anybody with any idea what the problem might be?

XFi Platinum - RCA Jacks - Arrrgggghh

On the recommendation of my local PC specialist I purchased the XFi Platinum for my music production needs. I currently own an M-Audio card but no Vista drivers are available so I was looking forward to sinking my teeth into something new. However, on getting the new PC home I found that my Fostek monitors have no where to plug into the card. They are powered speakers with standard RCA Jacks. When the Xfi was recommended to me I noticed some RCA Jacks on the front panel and thought all was sweet. Am I missing something? Is there a way to get these monitors working with the XFi or is it a lost cause? I fear I may have to resort to some cheap Logitech things to get me up and going. Please, someone, show me the light......

How come people buy sound cards and NOT read the info/instructions?When I looked at the I/O dri've bay for mt X-Fi Platinum I could see that it said L-Aux IN 2-R and to me that says ?INPUT and not output and anyway, why should anyone expect there to be RCA connectors for connecting speakers to be on the front?.ALL the speakers I have ever owned have always had regular jack plugs.

Rear sound goes to front speaker with DDL/DTS Connect (Xfi Platinum)

DRear sound goes to front speaker with DDL/DTS Connect (Xfi Platinum)T Hey there,
I just installed the newest modded driver from [url="http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790">here[/url] and now I have the problem that when using DDL/DTS Connect (yes I have it activated!): the rear left channel gets output on my front left speaker, and the rear right goes to front right. My externaldecoder is correctly identifying the output stream as DD/DTS and the front speaker and subwoofer works fine. Also when using my Xbox 360 the sounds correctly get to the rear speakers, so this is likely not a problem of my decoder.
Anyone had a similar problem to this? Any idea why this happens?
My system:
Windows 7 x64
Intel Core2Quad Q6600
4 GB RAM
nVidia Geforce 9800 GTX+

H I noticed this doesn't just happen with DDL/DTS Connect. The same behaviour happens when I connect my headphones to the plugs on the back of my computer. The rear plugs don't output anything, while the front plugs have "double" output.
I tried all kinds of different drivers, always removing the previous ones and restarting before trying a new one. Right now I'm with the official 2.8.003 X-Fi driver.
Please, somebody help!

New 955X Platinum and new BIOS relase for 915P Neo2 Platinum

Hi all,
Just wanted to bring some news to this forum so that not all topics are trouble related:-))
Hope it's ok with the moderators....
MSI has just relased their new 955X Platinum mobo, and I must say it looks great.
It has some special features like 9.1! Dolby sorround and E-SATA brackets for external S-ATA's. It fully support all the Intel? Dual Core processors such as the 820, 830 and 840 families and the highest Pentium 4 Extreme Edition series processors like P4EE 840.
Best of all, it delivers power to the cpu finally tru a 4.phase voltage regulator, so I hope this board OC better then its predecessors.
Sinse this is a Platinum board, I hope MSI havent skiped the 955X DIamond board they showed at CeBit2005 tough.
Anyway, look out for this board and you can read the press release here.
I know some of you 915P PLatinum owners have had som troubles with youre boards, I just want to inform you that MSI hase just released a new BIOS(1.7) to youre board. You can dowlad it here.
Well, thats all. Have a nice weekend everybody:biggthumbsup:

I know, but I,m hoping the 955X mDiamond will support SLI. nVidea has just revealed that they will support SLI on Intel chipsets.

MSI NEW P.E. Series Video Card - GTX670 Power Edition 2GD5/OC with Twin Frozr 4

Glad to be back in the forum and I was been busy for awhile. By this time lots of PC hardware already came out especially from Nvidia. Just like today my share would be MSI's N670GTX PE 2GD5/OC video card.
First of all lets talk about the GTX670 GPU chip. This GPU is the younger sibling of GTX680 which uses the same 28nm GK104 chip but with one disabled shader cluster/core.The reference or standard GPU clock is 915Mhz with a turbo boost of 980 and as for the memory is concerned, it has a 256bit memory bus connected to a 2GB GDDR5 memory with speed of 6008Mhz. Just like with any Kepler based architecture, the card would also have all the goodies like "Adaptive V-Sync", "AA TXAA (Temporal Super Sampling)", supports "DX11.1" and improved 3D Vision Surround.
Moving on, let's check out now what MSI did with their GTX670 SKU based video card. The card is under a new Series named "Power Edition" (series comparison table below) and it comes factory overclocked from GPU clock of 915MHz to 1020MHz and Turbo boost of 980Mhz to 1080Mhz. It also comes with the 4th version of Twin Frozr Thermal Cooling design with a theme color of Black and Blue which matches the color of MSI's midrange to high-end motherboards as well. The dual 8cm PWM fan based cooler are equipped with Propeller Fan Blades which draws air better and now has the so called "Dust Removal Technology", basically as you startup your PC the fan will rotate counter clockwise for 30 seconds clearing the dust from the cooling heatsink. Adding a finishing touch, MSI equipped the video card with their Military Class III components ensuring the best performance, efficiency, higher overclocks and durability.
Additional Box Shots of the N670GTX PE OC
MSI Series Comparison Table
New Power Edition Series which is a notch higher than the basic Twin Frozr Series.
Below are some other basic specs of the card which not been mentioned above.
•CUDA Cores: 1344 Units
•Output: DisplayPort / HDMI / DL-DVI-I / DL-DVI-D
•Total Draw Power: 200W
•Card Dimension: 267x117x38mm
•DirectX: DX 11.1
•OpenGL: 4.2
•PCI Express: 3.0
•SLI: 3-Way Capable
•3D Vision Surround: 3 Output per Single Card
•Pure Video HD: Y
•HDCP: Y
•Minimum Power Requirement: 550W with 38A for the +12V Rail
Actual shot of the Rear Ports
The card is powered up by additional 2x 6Pin power connectors.
Five 8mm thick heatpipes design
In the future, there might be a GTX670 4GB GDDR5 version as you can see the empty spaces between the GPU memory chips
Bundled Accessories included in the package
•1x DVI to VGA Dongle
•2x 4 Pins Molex to 6 Pins VGA Power
•DVD Driver/Utility Disc
•Manual and Quick Guide
Test Sytem and Configuration
Processor: Intel i7 3770K @ Stock Speed / 4.8GHz / 4.849GHz
Cooler: Thermaltake Advanced Frio
Memory: 2x4GB Kingston HyperX DDR3 2133Mhz
SSD: Kingston HyperX 3K SSD 90GB
Motherboard: Z77A-GD80
Videocard: N670GTX Power Edition 2GB OC
PSU: Antec TPQ 1200
Softwares: Windows 7 64bit Ultimate, MSI Afterburner 2.2.2, Nvidia Forceware 304.48, GPU-Z 0.6.2, CPU-Z 1.60.1.x64, Futurmark Benchmark Softwares, HwBot Heaven DX11
Okey let the benchies begin 1st set of benchies @ stock settings
3dMark06 - 28799
Vantage - P31817
3dMark11 - P9530
Heaven DX11 - 1956.985
2nd Set - Processor @ 4.8GHz while the video card is still running at stock speed
3dMark06 - 35852 From the previous score of 28K it jumped to 35K. This is becuase 3dMark06, relies heavily on the clock frequency of the processor.
Vantage - P34377
3dMark11 - P9861
Heaven DX11 - 1986.539
3rd Set - i7 3770K @ 4.849GHz and the video card GPU clock @ 1070mhz with turbo boost at 1148Mhz and memory clock speed @ 1717MHz (6868Mhz effective rate)
3dmark06 - 36402
Vantage - P36194
3dMark11 - P10263
Heaven DX11 - 2140.223
That's it. I will share another hardware soon

@Bernhard
The card is not with me already :( it was just left for few days. Don't worry next time I will make some tests using Virtu MVP.
@Update
Afterburner 2.2.3 is already out and with this new version. You can overclock the PE better

Vista x64 / Logitech Orbit MP / XFi Platinum problem confirmed... PLEASE RE

I was wondering why my 7. option disappeared from my speakers configuration option. Turns out another person had the same issue with his computer and found out that unplugging his Orbit MP fixed the problem. (It was limiting his sound to 5.) Well I had the same configuration but took it a step further to disable the Logitech Orbit recording device in device manager.Problem solved! Im not sure if this is a Vista, a CL, or Logitech problem. I figure I'd throw this out there to let everyone know. Problem reproduced with: XFi Platinum w/ optical out going to external receiver 7.Logitech .5 Quickcam DriversXFi 2_5_0004 drivers (the newest ones) Would like to hear everyone else's comments on this. Thanks.

It's funny how some people say you can enable 5. with vista 64 using alchemy but for 10 days now I have yet to get a response.

Need a little Help with my new xfi titanium

+Need a little Help with my new xfi titanium< A few questions here.
st question? Im using opt out port on the xfi ti. card and using digital li've on a windows 7 64 bit system,? I would like to know why when i use 5. or 7. and i check to make sure each speakear is working the rear speakers wont sound off but the sr and sl will in replace of the rear speakers. I did a test tone on my sony amp and the speaker are wired correctly becasue the rear speakers and the surrond? left and right sound off when they suppose too. Also when i try to click on? the sl and sr in the sound blaster control panel they dont work but if i click on the rear speakers in the control panel the sl and sr sound off. Do anyone know how i can fix this? So i would like to know why my sl and sr act like rears when they are not?
2nd question? How do i control the volume from my keyboard or from windows period when using opt out i was able to do so with my on board? sound max audio using spidf? Now i can only control the audio using the sony receiver.
Thank you for any help..

/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard.

ThinkPad X201 vs new model X series??

Hi,
could you please give me your opinion.
if you buy new thinkpad, would you go for X201 or new model X series? almost same price.
as i am classic ThinkPad fanatic i love x201 but price is high considering it is old model.
what would be your idea?
thanks
+ ThinkPad X201 3626-FBG / Intel Core i5 M520 2.4Ghz / DDR3 8Gb / Intel SSD 730 Series 240Gb / 12.1" WXGA 1280x800px / Dual boot Win7 Pro x64 - Ubuntu 14.04 LTS 64bit + X200 Ultrabase + ThinkVision L2250p

Depends what you're looking for in a laptop.
Screen:
X201 has a 16:10 screen. X220 and later have 16:9 screens.
X201 can retrofit a ddecent AFFS screen. X220 and later have an okay IPS screen from factory.
Performance:
X201 through X230 have decently clocked full power CPUs. X240 has a bit weaker but still okay CPU. Everything afterwards is low-power.
X201 to X220 also significantly increased integrated GPU performance. X220 to X230 to X240 are modest increases.
Storage:
X201 can only take a primary drive. X220 and later can take a primary plus mSATA/NGFF SSD.
Wifi Card:
X201 and X220 can have the BIOS whitelist removed for wifi cards. X230 and later cannot.
Battery Life:
X201 to X220 is the biggest jump in battery life. X220 to X230 to X240 are relatively minor increases. X220 and later can take a battery slice too.
Keyboard:
X201 and X220 have classic keyboards. X230 and later have chiclet keyboards.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

XFi Platinum - can't get the rack to w

Hello,just bought the Xfi platinum fatalty and although the card works fine, the nternal rack does not do anything. my configuration:OS: win XP 32 bitsMB: P5B Deluxe - Core 2 Duo 6600 - 3 GB RAM?my installation:i plugged the large flat cable into the card and the rack; plugged power into the card.. symptoms:No headset sound?(i did?tick the headsets?box?in the console), the remote does not work;, and there is no light on the rack (should there be a light? since there is one on the card itself maybe tehre is one on the rack as well)?what I have tried so far:remove setpoint SW since i have wireless keyboard and mouse and in this form there was a thread on?external rack and setpoint incompability... did not change anything though (I ahve the internal rack... I have tried in case nevertheless)?thanks for helping...

Yes, the power goes directly into the rack (2 in the picture), otherwise it doesn't work. [img"]http://img382.imageshack.us/img382/7563/iodri'vetw4.jpg">

XFi Platinum Not Detected

XFi Platinum Not DetectedMOkay, so I just?received?a XFi platinum from a friend. Anyways, the problem with the card is that when I put the card into my computer, at times my computer would freeze when attempting to install the drivers. I also had troubles at first when the card would not post causing my computer to not post. Anyways, its gone now and I can go into my desktop, I've tried installing the latest .5 drivers from creative and the old .3 drivers, when I do install them, it goes into "updating windows drivers" and goes straight to asking me to restart my computer. When I restart my computer however, it still doesn't work and dxdiag is not picking up a sound card as well. And to add even more bad luck, I can't seem to find the drivers on my computer at all. It seems like the drivers lied to me or something as I can't find them anywhere, I even tried installing them on safe mode as well. Help, I really want quality sound instead of this crappy onboard I am stuck with. I've also unistalled my old onboard drivers and disable onboard sound on my bios so I don't see what the problem is.

Help?

Treiber CD for XFI Platinum (Germ

Hallo
Ich suche die Treiber CD f?r ein XFI Platinum leider besitze ich meine nicht mehr. Kann mir jemand sagen wo die CD herbekommen oder kann sie mir jemand schicken?Ich brauche diese CD um meine Soundkarte 00% zu konfigurieren,weil das geht mit den Treiber auf der Homepage nicht.Die brauche sie haupts?chlich um THX ein zu stellen.

Hallo
Ich danke dir viel mal endlich seit drei tagen suchen und nach suchen in drei forum warst du der,der mir helfen konnte.Auf diese seite war ich schon mal gesto?en aber da hat der download nicht funktioniert. Ich danke dir noch mals. Ich hoffe ich habe das ihr richtig eingef?gt weil ich komme mit dem Forum nicht ganz klar.
Gru? GeforceGamer

Xfi platinum prob

Greetings.
I removed a fan from my chipset Nforce4 to put a zalman, i rebooted my computer,
and since that i can have no sound out of the PCI device of my Xfi platinum.
The front panel works fine and i get the sound, but i plugged my speakers on the rear as usual, and now it doesnt work, even with the phones i use on the front panel...
I tried to reboot, to reinstal drivers, and nothing change...
Could you help me please ?

well it has nothin to do with the zalman (but i want to get one too, is it the gold color one? how is it's) but besides that since u opened your case up and then it started, try taking your card out and vacuuming the PCI slot, the card, make sure all dust is clean, i opened my case once and my audio was horrible after but its because the dust jumped around and got into places, i blew it out and it was fine, give that a try, also blow out the ports too.

Xfi Platinum 4.1 speaker setup, rear speakers laggin

Heya
I've had my Xfi platinum for a couple of years now and have been really pleased. A mate of mine gave me his old pair of B&W 60's the other day so I thought I might as well plug them in and boost my system from a 2. to a 4. surround. I've got the B&W's plugged in as my front speakers through an amp, and I've plugged my old acti've 2. PC speakers in as my rears, however there's a slight lag between the front and rear speakers. Anyone have any ideas why this might be?
Thanks in a advance!!!
N
Intel Conroe 6400
3GB RAM
Windows XP Pro
Creative Xfi Platinum

Bump
Still havent found a solution : (

New XFi Platinum ser

Similar Messages

Maybe you are looking for