New xfi2 firmware issue

since i installed the new xfi2 firmaware my computer only recognizes my player for about 0 seconds before it closes it.

to be honest these are the solutions that may or may not work..
first thing I would try is rebooting the phone by holding the sleep/wake button and home button for 15 seconds until you see the white apple logo
if that doesn't work I would restore from backup and if that doesn't work I would restore as new if all else fails take it to your closest apple store they may replace the phone for a working one..

Similar Messages

New E61 firmware issues

I upgraded to the new firmware this week and found that my sip stopped working the working. I have tried playing with the settings but so far no luck if anyone has got it working with Asterisk please post your settings here.
3.0633.09.04
20-11-06
RM-89
Nokia E61

Hi vahmed,
I'm experiencing the same problem with the new firmware....
Have you find a fix for it?
Is there a way to reflash the previous firmware?
Thanks,
Fabian

Quality of new build of HP Pavilion 23xi / firmware issue?

Hi. I bough one HP Pavilion 23xi one year ago and I was very impressed with the image quality. So I bought one recently, but I noticed a difference between them: when viewed from above or side, this latest one has light leaks and a not-so-uniform display of colors, which get washed out more quickly when viewed from other angles. This does not happen with the first one, and it's independant of operating system (tried on Windows 8.1 64bit and OSX Yosemite.
Is it a build quality or firmware issue?
Firmware of monitor 1: RIM111 / 2013
Firmware of monitor 2: RIM232 / 2014
Also the OSD is different between monitors - how can I update firmware RIM111 to RIM232 ?
Thank you.

Hello @bmoreira,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the quality of your new monitor shows light leaks and not-so-uniform display of colors from different viewing angles. I would be happy to assist you in this matter!
I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Happy on Leopard, hangs on sleep with Tiger: Firmware issue?

I have an early 2005 G5 dual 2.0 that I bought new. It has 2.5GB of RAM and two drives: a 1TB and a just-recently-reinstalled original 160 GB drive.
I've updated it through the years and recently it's been running Leopard 10.5.8 on the 1TB drive.
I've just replaced it with a Mac Pro as my main machine, and wanted to set up the G5 to run Classic apps, so installed the original 160GB drive, wiped it clean with Drive Genius, and did an erase and install from my original 10.4 CD, followed by a bunch of Software Update runs to get it to 10.4.11.
Trouble is, when booted in 10.4.11, every time it sleeps, the fans go into high gear and the system hangs, so I have to press the power button to shut it down.
I cleaned off the disk and reinstalled.
I zapped the PRAM/NVRAM.
I booted in Open Firmware and did a reset.
I disconnected the 10.5 disk.
I ran Apple Hardware Test.
I disconnected all cables and pressed the PMU/SMU reset button.
Had a very nervous day when reconnecting the power cord gave me a solid power LED and a non-operational power button, until I got brave and reset the PMU again with the power cord plugged in (against Apple advice, but some folks said it worked). That got me booted again.
Ran through several cycles of circle-with-bar gray screen boots, hang with loud fan boots, safe boots, etc.
None of these steps indicated anything unusual or stopped the loud fan/dark screen/hang under 10.4.11.
I'm now at the point where the machine boots fine, sleeps fine, and is generally happy as a clam when booted on my tried-and-true 10.5.8 disk, but does the loud fan/dark screen/hang when booted under 10.4.11, most consistently around sleep time, but sometimes just trying to boot.
Other possible useful debugging info:
Right now, the only things plugged in are Ethernet, Apple Keyboard, Apple Mighty Mouse, and VGA monitor with DVI adapter.
Internal speaker no longer works, but headphone jack does.
I did try during this process to get my old Thrustmaster ADB joystick running via a Griffin iMate, but those experiments are on hold until I get the base system stable.
Most posts about similar behaviors (for example, http://discussions.apple.com/thread.jspa?threadID=2444469&start=0&tstart=0) point to a hardware issue, but that doesn't make sense to me because there aren't any issues under 10.5.8.
My current thinking is that it may possibly be a firmware issue, that I have a version installed that requires 10.5.x and is not compatible with 10.4.x. System Profiler lists
Boot ROM Version: 5.2.4f1
However, I can't find much info about this version.
Even if I found a 10.4-friendly Firmware Update, I'm not sure the machine would let me install an older version.
So, does my thinking seem sound, or are there other avenues I should pursue?

No PCI cards other than stock video card.
No 3rd party kexts running. Just a fresh install of 10.4, then everything Software Update fed me to get to 10.4.11.
Safe boot does not change the behavior.
I ran several more experiments and have some more results to share.
Booting from the Tiger disk reliably caused the machine to become unresponsive when going into sleep mode, after which the fans would go to full speed after a couple of minutes. Occasionally, upon power down and power up, I'd get the gray screen with the circle/slash graphic. Powering down and powering up would then result in a successful reboot.
Booting from the Leopard disk would not cause the machine to hang when going in to sleep. However, I did notice that the machine wasn't really sleeping, either. The screen would blank, but I never heard hard disks park (the option to "put hard disks to sleep when possible" is checked in the Energy Saver System Preference), and the case fans continued spinning at low (normal) speed. Wake up took no time at all and made no sound except from the monitor. It may not be sleeping, but at least it's not crashing, either.
Perhaps there really is a hardware issue, and Leopard is handling it more gracefully than Tiger. Unfortunately, Apple Hardware Test isn't finding it, and I see nothing indicated in the logs.
It's less than ideal, but unless I find a solution, I may just put the machine in never sleep mode to keep it from crashing.

Firmware Issues / BUG Report for WRT54GS v1.1

Hi all,
Router = WRT54GS (version 1.1 as printed on the bottom of the router)
My current firmware (most up to date) = v 4.71.4
I have found a few issues when using the following:
QoS related issues:
When using QoS, if users wish to disble it tempermentally (or change any other option), then re-enable it, any wireless device cannot access the LAN or WAN. This is regardless of static or DHCP IP. In order to fix this the user must reset the wireless security after re-enabling the QoS (disable the wireless security, save settings, set the security options again, and save settings)
If a user changes the routers IP to something other than the default when using QoS wireless devices are unable to connect using either static or dynamic IP.
Other issues I have encountered:
When setting wireless security up I chose WPA2-Personal (TKIP+AES). I also use MAC filter as well and only allow those that I specify to connect to the router. This works no problem. My problem is that if I disable SSID broadcasting my wireless devices will not connect regardless of static or dynamic IP. I have made sure there is sufficient strengh of the network (by sitting only a few feet from the router with my laptop to test this).
How do I report these issues? Will they be addressed in the next future release of firmware?
Thanks,
Pete

Hi, just to let you know. Reset, then re-configured and it is still having the issues as I have posted above. So deffiantly a router firmware issue I would say.
New Firmware version upgraded to: v4.70.8
Pete
Message Edited by aniceguy on 05-01-2009 01:58 AM

MAJOR EWS ACCESS FIRMWARE ISSUE IN "MADE IN THAILAND" HP 7520 PRINTERS

MAJOR EWS ACCESS FIRMWARE ISSUE IN "MADE IN THAILAND" HP 7520 PRINTERS
I've borrowed 2 "Made in China" HP Photosmart 7520's. Both have a fully working EWS. (Serial Numbers begins with CN)
I've purchased 2 "Made in Thailand" HP Photosmart 7520's. EWS does NOT respond in either one. (Serial Number begins with TH)
This same finding is reported by numerous other users.
The bad news is that I cannot locate "Made in China" 7520's in any of the large electronics stores to purchase. Apparently HP has shifted their 7520 production to Thailand and in doing so has introduced a very significant bug that results in an ability to access EWS in the Thailand 7520's.
HP- Are you working to remedy the firmware bug in the "Made in Thailand" 7520's that results in a total inability to access EWS? (I'm not interested in a work-around solution. I want to be able to directly access EWS as per the specs and software)

Hi mlrobins,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Someone to confirm Drobo firmware issue?

The other day, I was using Lr to move a folder from an internal work drive to my external 4-bay FW800 Drobo storage device. There were many files within the folders and was taking a while so I plugged in a card reader to import new files. Both devices were on my FW800 bus on my new Mac Pro. Seems normal, but the Drobo reset itself when I added the Lexar card reader and CF card. I've gone back and forth with Drobo for months now and today, they concluded, "don't do that" and implied that it's my computer having the issues while disregarding my claim that it can be reproduced on all 3 of my Mac workstations in my office.
Does anybody else have a 4-bay FW800 Drobo that can get it to fail when:
1) Drobo is in the middle of a FW800 transfer (a simple large file copy/paste is sufficient)
2) Add another FW800 device to the bus
**This isn't a Lightroom issue, but I appreciate anybody that can help as I use the Drobo with Lightroom**

Thanks for your comments. It's tempting to do what you did and just resort to lower performance in trade for stability, but it's hard to do because of the money paid for performance AND stability. And, as well, time is money.
Drobo has most recently advised me: "don't do that" which isn't a suggestion that sits well with me. For a device that's magically 'plug-in-and-forget', it's been a non-stop stress situation and time suck for me the entire year+ I've owned it. They did replace the unit because a firewire port failed, but the new unit still has this disconnect issue like the previous. I've confirmed for them that the issue happens on multiple workstations so it's either a fundamental OS issue or more likely a Drobo programming issue. You've now confirmed that it happens on Win7 so that rules out the OS.
Most other reputable companies won't put their customers through the diagnostics hell I've been through with their tech support and numerous trouble tickets. They've been nice all along, but mostly dismissive, contradictory and forgetful about what I've done to prove their product isn't working. The most recent troubleshooting tip was "don't do that". This is the same day Apple says "send back your computer and we'll send you a new one overnight". That's customer service that cares.
I'd expect Data Robotics, by now, to say something like: "it looks like you have uncovered a firmware issue. Our newer products do not have the same issue. We will be sending you an upgraded product to remedy this issue." Instead, they say "sorry, don't do that."

6280 firmware issue

this phone performed well until recently when i tried playing a jar file and it corrupted some files.Then it just kept on restarting. when i went to the nokia center they said its an hardware issue and they changed it.They reloaded Nokia firmware 3.65. one of my green themes is missing.
Can anyone suggest me of a new stable firmware.
to check ur firmware: *#000#Message Edited by terence1910 on 04-Dec-2006
09:52 PM

Latest firmware is 5.92, but it can depend on if your handset is operator branded or not.
My brothers been using 5.92 for a while now and says it's a big improvement from his previous version 3.81 (o2 uk Post Pay branded 6280).
First use the search to see if your question has already been answered...
Secondly I will not knowingly assist in breaking the forum rules.
My information is always changing, what I post at the time is usually true.

IPod touch 2nd gen restored 3 times in a week - hardware or firmware issue?

I have a 2nd gen 32 gig ipod touch that I purchased just before christmas. Everything has been just great until this past week. It has crashed hard..3 times now. I get the apple logo and it won't boot any further.
Each time has been random, crashed once while watching a movie, once in safari and once while playing a game.
I've just restored it, again. Anyone have any ideas? Firmware issue? Or hardware issue? Is there any way for me to roll back to a previous firmware?
Is anyone else having the same problem?
Any thoughts would be appreciated. I'd hate to have to send it back to Apple.
Thanks in advance!

OK now I get it.
You're going to have to do a full restore to factory settings and begin adding the music, video and apps back one category at a time.
Don't get in a rush, you need to know where/when the problem starts.
If every thing's fine for the week with music and video but crashes the day after you install "that app." then you'll know.
Also some apps have caused trouble in the past but you'll have to list them for anyone else to tell.
Just a note of warning : you may have a music or video file as the problem but you may also have a "quantity" problem.
The first will be fixable with a new file, from Apple(iTunes) if it's not something you created, so you'll need to have at least a rough idea of what was on your computer when the crashes started.
Make notes if you have to!
If the crashes continue then it's the Apple store, it could still be hardware or some program corruption, but at least you'll have eliminated a few contenders.

Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email. What is happening?

Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email to the same recepient. What is happening?

I talked with a tech today and he said I cloud is having problems which should be resolved shortly.
In the mean time I used the .me smtp server settings which allowed me to send mail.

Problems with the NEW V50 Firmware

Hi all... my nokia 5800 faces some problems here after upgrading to the new V50 firmware, not sure whether have u all encountered it before...
1. Sometimes when typing SMS, the cursor will keep moving backwards and hang there (sounding tut tut tut... continuously and unstoppable)
2. Sometimes the vibration on touching the screen will suddenly become stronger than normal, like suddenly Zeeek, zek, zek rather than normal zek, zek, zek~
I am not sure whther it is common in V50 firmware or it happens only to my specific phone.
Please help !!! Thanks~

A hard reset is needed to clean everything out on your phone. In fact, it is best to do a hard reset BEFORE any firmware update. This is because of possible inconsistencies with system files our own usage may have made. Installation of apps also has an effect, as they create their own system files which are set to be compatible to that of older firmware. New files and new system files coming with the newer firmware adding new features everywhere (this one, v50, in fact from my understanding affects display and icon system files due to the kinetic scrolling in icon menu) may have caused incompatibilities with certain apps. Also one must take into consideration orphaned files caused by installation and uninstallation of apps.
All of these possible incompatibilities may exist on both phone or memory card which both contains system files. First thing, try to run a disk check on the memory card, if nothing happens, you format. If nothing still happens, you reinstall the fw into the phone. If nothing still happens, you put a formatted card and format the phone and reinstall.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Photoshop CS4 new document dialog issue...

http://img50.imageshack.us/img50/7835/optionpu6.gif
Can this Photoshop CS4 new document dialog issue be improved? Info in the pic.

there's a feature request section at the top of the fourm allen. these kinds of posts should be done in there, so the programmers and engineers at adobe have them all in one place.

Beige G3 boot from **** problem; open firmware issues; bad motherboard?

Dear all,
I'm having huge boot/startup problems with my beige G3 that had been happily running OSX 10.3.9, but for purposes of this discussion we can (mostly) revert to OS 9. Originally, the machine was a G3 @300; was upgraded more than a year ago to a ZIF G4 @500.
To make a long story short, it won't boot from any hard drives, will not boot from any OS X CD, and will only occasionally boot from a 9.x startup CD (whether Apple or Norton Utilities). I think it's an open firmware issue, possibly caused by a bad motherboard (rev. 2).
All this started happening after I used techtool pro, but I think that's coincidence (even though I acknowledge that, for cops and computer users, there are no coincidences.) Also, as discussed below, I'm having the same problems with an HD that wasn't even in the computer when all these things began.
Here are some of the things I've done.
--repeatedly reset PRAM, both with key combinations and removing battery. The only time it will boot from a 9.x CD is after resetting PRAM.
--removed all add-on PCI cards.
--removed additional VRAM
--removed all memory cards and tried replacing one at a time.
--disconnected both existing hard drives and replaced with an older OS 9.x hard drive (approx 60 mb) that I'd used before. Also tried different ribbon cables.
--unplugged floppy drive
--disconnected PCI ATA disk controller that I'd been using for running a large (1.8 gb) hard drive.
--regarding open firmware: readenv usually shows totally normal default AND installed settings. Using reset-all works fine -- at least it makes the machine reboot, but doesn't solve the problem. reset-nvram does NOT work -- says it's an "unknown word."
--using startup keys like holding down the option key, or shift key, or X key or cmd-option plus two others I can't remember, has no effect. Again, after I've tried any kind of reboot, the ONLY way to get the C-key at startup to boot the CD is by resetting the pram (key combination). Otherwise, the usual result of these experiments is a dark screen on startup -- nothing at all (and the LCD monitor tells me "no input.")
--regarding OSX: sometimes (and I emphasize sometimes) I can get the machine to start booting from an OSX 10.2 CD, but it won't complete the process. Sometimes I get a "prohibited" (as in no-parking, no-smoking) icon; sometimes it will start booting (grey screen, OS X Apple icon), then crash (horizontal grey and white jagged bars); sometimes it will show the OS 9 start icon (the tiny smiling Mac SE), but not boot at all.
--when I get the mac successfully booted with an OS 9.x CD (again, this works sometimes, but not always), the old hard drive with two partitions does show on the desktop and can be accessed. Using either disk repair or Norton Utilities shows the 9.2 system partition on the hard drive to be fine. But if I go to the startup disk control panel, confidently set the 9.2 partition as my startup disk, then reboot, there's no change. It won't boot and I'm back at square one.
--even when I do get successfully booted with 9.x, the machine will still occasionally crash for no reason -- ie when I'm moving a Window.
--the only thing I haven't done is slowed down the processor. It's a ZIF G4 bought more than a year ago from XLR8 your Mac. I'm running at the default 500 mhz, and it's never given me any trouble.
So I think it's a bad motherboard or ROM. Thoughts?
Thanks.

The beige Mac is now operating happily again. My original tentative diagnosis remains the same (although still tentative): corrupted PRAM from bad battery, compounded by bad cables that wrote corrupted data to hard drives, and also (possibly) allowing Tech Tool Pro (a utility that I now regard with deep suspicion) to create a "virtual" startup partition.
A few things I've learned along the way that hopefully may be useful:
--remember that the Ex Post Facto utility can be used to help OS X startup, not just installation. This applies to hard drives, emergency CDs, installation CDs, etc. If you can boot into any working hard drive partition (OS 9 or a backup OS 10), then run Ex Post Facto (same program runs on either OS 9 or X -- don't ask me how) and tell it what system you want to start up from. Also, the utility has sometimes told me that the startup extensions on the disc that I wanted to boot up from were bad, and offered to fix them (which works).
--at least on my Mac (beige, v. 2 motherboard), resetting the CUDA button, resetting the PRAM, resetting Open Firmware and "draining" the memory by unplugging the computer and disconnecting the battery for several hours ALL DO DIFFERENT THINGS.
Specifically, if I'm having trouble booting (from a hard drive or a CD), the FIRST thing I do is restart and resetting the PRAM on the fly -- holding down command, option, P and R at startup, and waiting for the chimes (preferably at least 3-4 times).
If I do that and DON'T hear the chimes, that's my cue for my SECOND action -- restarting into open firmware (command, option O and F keys on startup). That should bring up the black text on white background open firmware screen. View other posts or apple support for details, but if you do PRINTENV and see a bunch of weird gibberish after the default/installed lists, you know that it was messed up and you need to clear it through reset nvram and reset all commands. Be aware some of these commands do or do not work depending upon what version of Open Firmware you have.
After I've rebooted with Open Firmware, then on restart I should be able to reset the PRAM on the fly. If that works, then either let the machine run and see what happens, or hold down the C command and see if it will boot from the CD
Usually, if I've fixed everything as above, the machine will boot into whatever version of OS 9 it finds on a hard drive. That's fine with me -- at that point, use Ex Post Facto to reboot into your OS X. (Before I forget: I used the shareware startup CD creator program BootCD to make an emergency boot CD based on OS 10.2.8 (which theoretically will support a beige mac in native fashion) and Disk Warrior, the god of disk repair utilities. Even though the CD should boot just by holding down the C key on startup, it doesn't -- but if I use Ex Post Facto to boot it, no problems (although the process is very slow -- be patient). Then I can fix almost anything using Disk Warrior.)
If none of the above works, then I'll try resetting the CUDA (on my beige minitower, it's a very small black button inconveniently located between a PCI slot and the side of the computer housing). Hold it down for 15 seconds. That should REALLY clear the PRAM. I know this does something different from the previous steps because this is the only action (except the battery disconnect -- next) that clears the date and time from the memory.
If all else fails, I will unplug the computer and disconnect the battery, then push the CUDA button for 15 seconds and let the machine sit overnight.
One final finding -- I thought I'd fixed everything, but both my hard drives suddenly quit working, I discovered that during all this repeated connect/disconnect of things, one of the male pins inside one of the connectors on my Acard ATA PCI card had broken off. Not good. Fortunately, the card had a second connector, which works fine. And I did some extensive shaking of the computer to make sure (I hope) that the broken pin hadn't landed on a circuit board.
All this took more than two weeks, and the advice of this board was much appreciated. Now I'm on to my next adventure -- trying to figure out why a combo Firewire/USB PCI card won't mount an external drive on Firewire, but will on USB. I've tried two cards with same result -- but a Firewire-only card works just fine.)
Regards to all,
Graham

24" iMac firmware issue

I have a 24" iMac (Early 2009) that has what I believe to be a firmware issue. The computer boots up to show the grey Apple logo, with a spinning gear and progress bar showing up pretty quickly. The progress bar fills maybe 5%, then goes away, leaving the Apple logo and spinning gear. The computer doesn't boot any further, with the gear continuing to spin. It won't boot from an external drive, an install disc, or netboot. I'm unable to clear the PRAM (holding the keys down does nothing). I've removed and re-installed the RAM, and I've removed the CMOS battery on the logic board and put it back in after a couple minutes. Nothing has changed. I'm guessing a firmware update was installed and power was shut-off mid-update, causing to be stuck in this loop. Am I missing something? Is there anything I can do to clear this EFI update or reset the firmware somehow?

Hello All
As a 'newbie-switcher' (think that's right!?!), I am already on my second iMac in three months, with the first being returned within a week due to it restarting on it's own a couple of times a day and reporting no error at all! My current iMac has worked flawlessly until around a week ago when the restarting behaviour returned but as often as before, maybe once every couple of days. I reset the PRAM & SMC and checked\repaired permissions and all seemed ok until I then updated the EFI firmware a couple of days ago. I am now having similar problems, if not identical to those described here with the iMac not waking from sleep, shuting down or restarting again on it's own. And once I found it would not start at all, the screen stayed black but the fans were running on full speed! I have again reset the PRAM and SMC and will now wait and see!
During my investigations to these problems I was able to cause the iMac to instantly shutdown and restart by simply touching the cables at the rear, Power or Keyboard, and last night I shut it down by simply putting my cup of coffee down next to the iMac!!! So you would think that a loose connection on the power cord could be to blame, but flexing and bending the cables and conectors will not re-create the problem!?!
Do you guys think that I should be looking to swap it for iMac number three (third time lucky?), do you think it sounds more like a hardware problem with the power supply or the firmware?

Anything new with keyboard issues in XP

read alot of posts but doesnt appaer to be anything new on keyboard issues in XP. works for awhile then nothing.mouse does work. i dont have an old keyboard around i can use. was hoping it was something to do with XP settings.
any word ?

I seemed to have the same issues other people were reporting: USB keyboard would disconnect every five minutes or so, would sometimes re-connect by itself, would other times freeze and require re-plugging. The mouse would usually keep working even when plugged into keyboard. This would happen on all USB ports. It was most noticeable in Windows (through Boot Camp and through Parallels), but it would also happen less noticeably in OS X. In OS X, it would often recover without re-plugging, but errors would show up in the Console logs. It seemed to get worse the longer my computer was on.
Turned out, for me at least, to be a faulty keyboard. Although I tested the keyboard on another computer and it was fine, on the Intel iMac it had the disconnection problem. I repaired permissions, verified the disk, reset PRAM, restarted in Safe Boot, but nothing helped.
I called Apple about it. They replaced the keyboard under warranty, and since then (about two weeks) the problem has not occured once, in OS X or in Windows.
If you haven't done so already, I recommend thorough troubleshooting. Disconnect all other peripherals other than the mouse and monitor your logs in OS X (open Console under Utilities) to see if USB errors come up. Boot into in Safe Boot mode by pressing Shift on start-up. If the error still comes up in OS X, as it did in my case, then you have a valid problem you can call Apple about. If it happens only in Windows, unfortunately it might be harder to make a case since Boot Camp is beta software. When you call Apple you can desscribe all the testing you already did.
(are you still under warranty?)
20" iMac Core Duo Mac OS X (10.4.6)

New xfi2 firmware issue

Similar Messages

Maybe you are looking for