New xorg and xorg-server
Now that I've installed xorg from testing every time I do an update it wants to replace xorg with xorg-server :?:
kk, thanks for the info moo-crumpus
Similar Messages
-
Trying to set up a new DB and Mobile server ....
I have a server runing ora 9i and mobile server 10.2 on linux,
Now trying to change the server to a new one with linux and
Oracle 10.1. and 10.3 as the mobile server.
Did the following steps.
1.All users were logged off in old server
2.stopped mobile server
2. Exported using system full db
3. imported the same to new system
4. Checked ADMIN_JDBC_URL,THIN_JDBC_URL and found the new server settings.
. every thing is fine except mobile server part.
when try to start mobile server it gives following.
[oracle@test bin]$ ./runmobileserver
2008-03-05 11:29:03.169 NOTIFICATION JMS Router is initiating ...
2008-03-05 11:29:04.188 ERROR J2EE HTTP0004 Internal error raised tyring to instantiate web-application: webtogo defined in web site OC4J 10g (10.1.3) Default Web Site. Application: mobileserver does not exist. Error creating Web application: webtogo
08/03/05 11:29:04 Oracle Containers for J2EE 10g (10.1.3.0.0) initialized
Then tryied ./repwizard and it says system does not have required priviledge. But as to the help section all roles were assigned to System.
if anyone has the correct method of transfering the entire db and mobileserver to a new server please post details.
I need to sync clients on the new server without refreshing.
Help is appreciated.Thanks rekounas,
I was out of the office for few days and back again at work.
I made a mistake while running the repwizard.
now its ok.
Problem was i was using mobileadmin to run repwizard.
But i tried it with database schema(back end) user and password now ok and
running on 10g r3. but it does a complete refresh on the new server. that takes time and i think there should be some parameter to make it only fast refresh. -
New modem and now server cant be accessed
Changed modem today from BT to ntl - internet etc all working ok.
But since the change the server cannot be accessed.
Go > Connect to Server ..... never connects.
At the server...
Try to connect to Server preferences.... get 'Server cannot be found on the network"
In System Preferences Network pane on left is...
Ethernet - Connected. (Looks OK)
lPv4 - not connected. (The pane on the right shows expected server info - i hit connect and it prompts for password but just says server does not exist.)
This is the second time this has happened. In frustration last time I just reinstalled OSX Server (It is Leopard version)
There has to be an easier remedy.
Anyone help?Changing the modem shouldn't be a problem. Try resetting the modem - power it down and let it rest a moment, then power it back up again. Some need more power-off time than others for the reset to be effective. While it is powered down, disconnect the coaxial cable as well. Literally unscrew it and leave it disconnected for a moment or two.
Don't do anything with your Extreme just yet. -
[SOLVED] Blinking screen - new Xorg and Intel issue
Screen is blinking after opening laptop lid no matter what i did (nothing, lock screen, hibernate, standby). It blinks every 10-20 seconds for about 1-2 seconds, and cpu% used by X's raises from 0.3-1.0 to even 10% and system slows down a little in that moment. My Xorg logs:
$ cat /var/log/Xorg.0.log
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
# closing & opening laptop lid
# right after opening (properly i suppose)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "CMO", prod id 4609
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4609
# after 10-20 seconds
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "CMO", prod id 4609
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4609
# over and over...
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "CMO", prod id 4609
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4609
Blinking stops when i restart computer.
I have newest xorg and intel drivers (xorg-server 1.7.1.901-2 & xf86-video-intel 2.9.1-1). I tried also downgrade this (and related) packages to older versions (even xorg-server 1.5.* & xf86-video-intel 2.4.*) and the same happens... with only one difference. On that oldest packages I've tried screen doesn't blinks, but the wallpaper of the desktop is changing: my -> default -> my -> default... with the same frequency . I was googling a lot, believe me. I study IT on a University and I asked my friends from there, and they just run out of ideas. In addition i can write that it isn't my laptop fault because windows xp works fine and ubuntu 9.04 (i had before archlinux) also worked good. It has started on ubuntu 9.10, so I thought I move to archlinux, and its still here? I suppose its a problem with intel drivers or xorg, but somehow linked with power management of the monitor(?). But why then older packages don't work? Please, I will be grateful for any help.
My /etc/X11/xorg.conf file generated by 'Xorg -configure' command:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri2"
Load "record"
Load "dbe"
Load "dri"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
#Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -HSync -Vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by joda (2009-12-01 09:49:38)SOLVED!!! Must enable KMS => switch off vga option in grub, and replace it with "i915.moduleset=1"
-
Update problems with catalyst and xorg-server
/etc/pacman.conf
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch
$ pacman -Syu
:: catalyst-utils: benötigt xorg-server<1.12.0
$ pacman -Si xorg-server
Repositorium : extra
Name : xorg-server
Version : 1.12.0-1
Mmmmh ...
Ranomierpacman.conf
#[...] standart stuff
#yaourt repos
[archlinuxfr]
Server = http://repo.archlinux.fr/x86_64
#catalyst repos
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch
#EOF
Updating
$ pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
archlinuxfr is up to date
catalyst is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: catalyst-utils: requires xorg-server<1.12.0
Information about the required package
# LC_ALL=C pacman -Si xorg-server
Repository : extra
Name : xorg-server
Version : 1.12.0-1
URL : http://xorg.freedesktop.org
Licenses : custom
Groups : xorg
Provides : x-server
Depends On : libxdmcp libxfont udev libpciaccess libdrm pixman libgcrypt libxau
xorg-server-common xf86-input-evdev
Optional Deps : None
Conflicts With : nvidia-utils<=290.10
Replaces : None
Download Size : 1273.11 KiB
Installed Size : 3818.00 KiB
Packager : Andreas Radke <[email protected]>
Architecture : x86_64
Build Date : Mon Mar 5 07:00:50 2012
MD5 Sum : 499b6f00f70cab6f75d0cea349b69fd6
SHA256 Sum : 0d9a4a50770912e8d90b21ffe9dbb0d83d58e60598088d55881000fccf1e87e2
Signatures : Yes
Description : Xorg X server
But in the repos IS the 1.12.x package of xorg-server
wondering, ok then i take these repos
Last edited by Ranomier (2012-03-13 18:42:18) -
Issues with Arch, xorg and Asus eee 4G 701
Hello, this is my first post here
I installed Arch 2009.02 on my Asus eee 701(4G), the installation went well and the system was up and running within minutes. I configured the wireless card (Atheros) which arch supported out-of-the-box and updated the system with pacman -Syu. Then, I installed the intel driver for the vga of the eee and attempted to configure X.
The issues started at this point. "Xorg -configure" appeared to work, but when I did "X -config /root/xorg.conf.new" all I could see was the mouse cursor as an X and nothing more. The touchpad didn't respond and nothing worked.
Then, I tried using "xorgcfg" but even though the screen worked great (I could see the stuff displayed), the system couldn't receive any input from the touchpad and thus the result was just a little bit better than with "Xorg -configure". I tried to reboot and use a USB mouse to see if the cursor responded but to no avail...
As a last resort, I decided to use the xorg.conf found on the eee page of the archwiki. I downloaded it in my PC, saved it and used wget to move it from my ftp server to the eee. I moved it to /etc/X11/ as xorg.conf and attempted to run "X -config /etc/X11/xorg.conf" to see if it worked. Unfortunately, no result. xorg attempted to start and then quit with the error "Fatal server error: no screens found".
That's pretty much it... I have no idea what to do next or why the xorg.conf found in the Arch wiki doesn't work... Any suggestions would be really appreciated...
Last edited by DreamAxe (2009-02-19 08:23:39)I did what you suggested above, but it still fails. Then I studied the log and I found this:
Parse error on line 10 of section files in file /etc/X11/xorg.conf
"RgbPath" is not a valid keyboard in this section
Any suggestions on how to solve this?
EDIT: OK, the discussion page on the Archwiki helped. All I had to do was remove the 'RgbPath "/usr/share/X11/rgb"' line and xorg worked flawlessly
Last edited by DreamAxe (2009-02-20 05:03:26) -
Openbox and Xorg 6.8.0 w/composite
I have tried flux, pekwm, waimea and many others. They all did not handle composite very will if at all.
My config is simple torsmo and widow manager with lots of terms and apps, ie. firefox-0.10, thunderbird-0.8, abiword, gnumeric, eterm, etc. All simple.
Openbox handles composite flawlessly, xcomposite -cCF. In addition memory usage is great, very low.
Just thought I would drop a line this is awsome. I wanted something like flux I will be trying transpency soon.
It is worth a try.....and is under active devel.
WaltI too was amaze by the fact that it follows standards of freedesktop.org. I think waimea will follow suit when the developer gets time. But, openbox has such a leap on the development.
Still have not tried transpency yet. But, pbpanel and torsmo are just awsome!!!
composite is part of the new version of xorg 6.8.0. It allows shadowing of windows.
Composite OPTIONS:
-d display
Specifies the display to manage.
Specifies the display to manage.
-a Automatic server-side compositing. This instructs the server to
use the standard composition rules. Useful for debugging.
-c Client-side compositing with soft shadows and translucency sup-
port.
-f When -c is specified, enables a smooth fade effect for transient
windows like menus, and for all windows on hide and restore
events.
-n Simple client-side compositing.
-s Server-side compositing with hard-edged shadows.
-C When -c is specified, attempts to avoid painting shadows on pan-
els and docks.
-F When -f is specified, also enables the fade effect when windows
change their opacity, as with transset(1).
-S Enables synchronous operation. Useful for debugging. -
Sever issue with Xorg and Nvidia Drivers
I run a 2.6.20 kernel with Xorg and Nvidia drivers all from arch rep on a Asus NV6200. Everything works fine, except one thing. When I exit X, the monitor shuts down imediatly. It wont start up at all, not even by manual startup. I cant understand what happens. The configuration is correct, is done with the correct settings for my video-card and monitor taken directly from the documentation. I cant use my X server at all since several days ... I checked the logs and there are no EE's. Anyway ... here is the log. Help anyone can help, I cant use X at all.
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux solarflare 2.6.20-ARCH #1 SMP PREEMPT Fri Mar 16 20:22:11 CET 2007 i686
Build Date: 27 February 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 21 03:26:45 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "AOC 7F+"
(**) | |-->Device "NVIDIA 6200"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(**) FontPath set to:
/usr/share/fonts/misc
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c34a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1106,3099 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1317,0985 card 1113,1216 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1019,0996 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1019,0996 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1019,0996 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1019,0996 rev 50 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0221 card 1043,820c rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xeaffffff (0x3000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xe8000000/24, 0xd0000000/28, 0xe9000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9755
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9755
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) NVIDIA dlloader X Driver 1.0-9755 Mon Feb 26 23:23:13 PST 2007
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.03.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): AOC Spectrum7F (CRT-0)
(--) NVIDIA(0): AOC Spectrum7F (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] 0 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[8] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[10] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[19] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[20] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[23] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.No ... the problem is in the kernel that comes precompiled.
I did this test.
The first time I installed the kernel I unloaded nvidiafb since I dont like it.
When I install nvidiafb back something strange happends. Nvidia module fails to load.
The modprobe sais it cannot find the device nvidia.ko ... but it is there!
So my best guess is, there is something with the kernel. Any ideas?
Problem resolved, installed older driver
Last edited by Nefer-Ra (2007-03-22 02:59:25) -
Hi.
I was running an older version catalyst and xorg, but I upgraded everythin to try to get rid of an issue, and now the problem is much worse.
For some reason the open source ati/radeon drivers now result in a very high load average, so I'm trying to get the catalyst drivers to work.
However, I'm getting a floating point error.
Here's the log
[ 13.823]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 13.823] X Protocol Version 11, Revision 0
[ 13.823] Build Operating System: Linux 2.6.35-ARCH x86_64
[ 13.823] Current Operating System: Linux harah 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64
[ 13.823] Kernel command line: root=/dev/disk/by-uuid/a8eaea92-ee81-4bb0-9bb8-6904e884df07 ro nomodesetting
[ 13.823] Build Date: 01 November 2010 10:29:19PM
[ 13.823]
[ 13.823] Current version of pixman: 0.20.0
[ 13.823] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.823] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.823] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 6 19:52:38 2010
[ 13.857] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.857] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.929] (==) ServerLayout "aticonfig Layout"
[ 13.929] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 13.929] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 13.930] (**) | |-->Device "aticonfig-Device[0]-0"
[ 13.930] (==) Automatically adding devices
[ 13.930] (==) Automatically enabling devices
[ 13.993] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.993] Entry deleted from font path.
[ 14.079] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 14.090] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 14.090] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.090] (II) Loader magic: 0x7d3360
[ 14.090] (II) Module ABI versions:
[ 14.090] X.Org ANSI C Emulation: 0.4
[ 14.090] X.Org Video Driver: 8.0
[ 14.090] X.Org XInput driver : 11.0
[ 14.090] X.Org Server Extension : 4.0
[ 14.091] (--) PCI:*(0:1:0:0) 1002:9480:104d:9035 rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 14.091] (II) Open ACPI successful (/var/run/acpid.socket)
[ 14.091] (II) "extmod" will be loaded by default.
[ 14.091] (II) "dbe" will be loaded by default.
[ 14.091] (II) "glx" will be loaded by default.
[ 14.091] (II) "record" will be loaded by default.
[ 14.091] (II) "dri" will be loaded by default.
[ 14.091] (II) "dri2" will be loaded by default.
[ 14.091] (II) LoadModule: "extmod"
[ 14.284] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 14.296] (II) Module extmod: vendor="X.Org Foundation"
[ 14.296] compiled for 1.9.2, module version = 1.0.0
[ 14.296] Module class: X.Org Server Extension
[ 14.296] ABI class: X.Org Server Extension, version 4.0
[ 14.296] (II) Loading extension MIT-SCREEN-SAVER
[ 14.296] (II) Loading extension XFree86-VidModeExtension
[ 14.296] (II) Loading extension XFree86-DGA
[ 14.296] (II) Loading extension DPMS
[ 14.296] (II) Loading extension XVideo
[ 14.296] (II) Loading extension XVideo-MotionCompensation
[ 14.296] (II) Loading extension X-Resource
[ 14.296] (II) LoadModule: "dbe"
[ 14.296] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 14.310] (II) Module dbe: vendor="X.Org Foundation"
[ 14.310] compiled for 1.9.2, module version = 1.0.0
[ 14.310] Module class: X.Org Server Extension
[ 14.310] ABI class: X.Org Server Extension, version 4.0
[ 14.310] (II) Loading extension DOUBLE-BUFFER
[ 14.310] (II) LoadModule: "glx"
[ 14.310] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.332] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 14.334] compiled for 7.6.0, module version = 1.0.0
[ 14.334] (II) Loading extension GLX
[ 14.334] (II) LoadModule: "record"
[ 14.334] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 14.335] (II) Module record: vendor="X.Org Foundation"
[ 14.335] compiled for 1.9.2, module version = 1.13.0
[ 14.335] Module class: X.Org Server Extension
[ 14.335] ABI class: X.Org Server Extension, version 4.0
[ 14.335] (II) Loading extension RECORD
[ 14.335] (II) LoadModule: "dri"
[ 14.335] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 14.365] (II) Module dri: vendor="X.Org Foundation"
[ 14.365] compiled for 1.9.2, module version = 1.0.0
[ 14.365] ABI class: X.Org Server Extension, version 4.0
[ 14.365] (II) Loading extension XFree86-DRI
[ 14.365] (II) LoadModule: "dri2"
[ 14.366] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 14.366] (II) Module dri2: vendor="X.Org Foundation"
[ 14.366] compiled for 1.9.2, module version = 1.2.0
[ 14.366] ABI class: X.Org Server Extension, version 4.0
[ 14.366] (II) Loading extension DRI2
[ 14.366] (II) LoadModule: "fglrx"
[ 14.391] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 14.858] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 14.864] compiled for 1.4.99.906, module version = 8.79.4
[ 14.864] Module class: X.Org Video Driver
[ 14.868] (II) Loading sub module "fglrxdrm"
[ 14.868] (II) LoadModule: "fglrxdrm"
[ 14.868] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 14.893] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 14.893] compiled for 1.4.99.906, module version = 8.79.4
[ 14.893] (II) ATI Proprietary Linux Driver Version Identifier:8.79.4
[ 14.893] (II) ATI Proprietary Linux Driver Release Identifier: 8.791
[ 14.893] (II) ATI Proprietary Linux Driver Build Date: Oct 26 2010 22:57:54
[ 14.893] (++) using VT number 7
[ 14.894] (WW) Falling back to old probe method for fglrx
[ 15.013] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 15.025] (--) Chipset Supported AMD Graphics Processor (0x9480) found
[ 15.027] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 15.027] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 15.027] (II) AMD Video driver is signed
[ 15.027] (II) fglrx(0): pEnt->device->identifier=0x1382b40
[ 15.027] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[ 15.028] (II) Loading sub module "vgahw"
[ 15.028] (II) LoadModule: "vgahw"
[ 15.028] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 15.042] (II) Module vgahw: vendor="X.Org Foundation"
[ 15.042] compiled for 1.9.2, module version = 0.1.0
[ 15.042] ABI class: X.Org Video Driver, version 8.0
[ 15.042] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 15.042] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 15.042] (==) fglrx(0): Default visual is TrueColor
[ 15.042] (**) fglrx(0): Option "DPMS" "true"
[ 15.042] (==) fglrx(0): RGB weight 888
[ 15.042] (II) fglrx(0): Using 8 bits per RGB
[ 15.042] (==) fglrx(0): Buffer Tiling is ON
[ 15.043] (II) Loading sub module "fglrxdrm"
[ 15.043] (II) LoadModule: "fglrxdrm"
[ 15.043] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 15.201] ukiDynamicMajor: found major device number 251
[ 15.201] ukiDynamicMajor: found major device number 251
[ 15.201] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 15.201] ukiOpenDevice: node name is /dev/ati/card0
[ 15.201] ukiOpenDevice: open result is 11, (OK)
[ 15.201] ukiOpenByBusid: ukiOpenMinor returns 11
[ 15.201] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 15.201] (==) fglrx(0): NoAccel = NO
[ 15.201] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 15.201] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4650" (Chipset = 0x9480)
[ 15.201] (--) fglrx(0): (PciSubVendor = 0x104d, PciSubDevice = 0x9035)
[ 15.201] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 15.201] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 15.201] (--) fglrx(0): MMIO registers at 0xd0020000
[ 15.201] (--) fglrx(0): I/O port at 0x0000d000
[ 15.201] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 15.225] (II) fglrx(0): AC Adapter is used
[ 15.269] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 15.352] (II) Loading sub module "vbe"
[ 15.352] (II) LoadModule: "vbe"
[ 15.353] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 15.367] (II) Module vbe: vendor="X.Org Foundation"
[ 15.368] compiled for 1.9.2, module version = 1.1.0
[ 15.368] ABI class: X.Org Video Driver, version 8.0
[ 15.368] (II) fglrx(0): VESA BIOS detected
[ 15.368] (II) fglrx(0): VESA VBE Version 3.0
[ 15.368] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 15.368] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 15.368] (II) fglrx(0): VESA VBE OEM Software Rev: 11.20
[ 15.368] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 15.368] (II) fglrx(0): VESA VBE OEM Product: M96
[ 15.368] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 15.408] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 15.408] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR3
[ 15.408] (II) fglrx(0): PCIE card detected
[ 15.408] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 15.408] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 15.410] (II) fglrx(0): Using adapter: 1:0.0.
[ 15.441] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 15.466] (II) fglrx(0): Interrupt handler installed at IRQ 45.
[ 15.466] (II) fglrx(0): RandR 1.2 support is enabled!
[ 15.466] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 15.466] (==) fglrx(0): Center Mode is disabled
[ 15.466] (II) Loading sub module "fb"
[ 15.466] (II) LoadModule: "fb"
[ 15.467] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.485] (II) Module fb: vendor="X.Org Foundation"
[ 15.485] compiled for 1.9.2, module version = 1.0.0
[ 15.485] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.485] (==) fglrx(0): Active stereo disabled
[ 15.485] (II) Loading sub module "ddc"
[ 15.485] (II) LoadModule: "ddc"
[ 15.485] (II) Module "ddc" already built-in
[ 16.276] (II) fglrx(0): Finished Initialize PPLIB!
[ 16.880] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 16.880] (II) fglrx(0): Output DFP1 has no monitor section
[ 16.880] (II) fglrx(0): Output CRT1 has no monitor section
[ 16.908] (II) Loading sub module "ddc"
[ 16.908] (II) LoadModule: "ddc"
[ 16.908] (II) Module "ddc" already built-in
[ 16.908] (II) fglrx(0): Connected Display0: LVDS
[ 16.908] (II) fglrx(0): Display0: Failed to get EDID information.
[ 17.262] (II) fglrx(0): Cannot get EDID information for LVDS
[ 17.277] (II) fglrx(0): Output LVDS connected
[ 17.277] (II) fglrx(0): Output DFP1 disconnected
[ 17.277] (II) fglrx(0): Output CRT1 disconnected
[ 17.277] (II) fglrx(0): Using exact sizes for initial modes
[ 17.277] (II) fglrx(0): Output LVDS using initial mode 1600x900
[ 17.277] (II) fglrx(0): DPI set to (96, 96)
[ 17.277] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4650 has 2 configurable heads and 1 displays connected.
[ 17.277] (==) fglrx(0): PseudoColor visuals disabled
[ 17.277] (II) Loading sub module "ramdac"
[ 17.277] (II) LoadModule: "ramdac"
[ 17.277] (II) Module "ramdac" already built-in
[ 17.278] (==) fglrx(0): NoDRI = NO
[ 17.278] (==) fglrx(0): Capabilities: 0x00000000
[ 17.278] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 17.278] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 17.278] (==) fglrx(0): UseFastTLS=0
[ 17.278] (==) fglrx(0): BlockSignalsOnLock=1
[ 17.278] (--) Depth 24 pixmap format is 32 bpp
[ 17.278] (II) Loading extension ATIFGLRXDRI
[ 17.278] (II) fglrx(0): doing swlDriScreenInit
[ 17.278] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 17.278] ukiDynamicMajor: found major device number 251
[ 17.278] ukiDynamicMajor: found major device number 251
[ 17.278] ukiDynamicMajor: found major device number 251
[ 17.278] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 17.278] ukiOpenDevice: node name is /dev/ati/card0
[ 17.278] ukiOpenDevice: open result is 16, (OK)
[ 17.278] ukiOpenByBusid: ukiOpenMinor returns 16
[ 17.278] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 17.278] (II) fglrx(0): [uki] DRM interface version 1.0
[ 17.278] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 17.278] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 17.278] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f30163fd000
[ 17.278] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 17.278] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 17.278] (II) fglrx(0): swlDriScreenInit done
[ 17.278] (II) fglrx(0): Kernel Module Version Information:
[ 17.278] (II) fglrx(0): Name: fglrx
[ 17.278] (II) fglrx(0): Version: 8.79.4
[ 17.278] (II) fglrx(0): Date: Oct 26 2010
[ 17.278] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 17.278] (II) fglrx(0): Kernel Module version matches driver.
[ 17.278] (II) fglrx(0): Kernel Module Build Time Information:
[ 17.278] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.36-ARCH
[ 17.278] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 17.278] (II) fglrx(0): Build-Kernel __SMP__: no
[ 17.278] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 17.278] (II) fglrx(0): [uki] register handle = 0x00004000
[ 17.326] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
[ 17.326] (II) fglrx(0): DRI initialization successfull
[ 17.326] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a8000
[ 17.351] (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624)
[ 17.351] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption)
[ 17.351] (II) fglrx(0): Largest offscreen area available: 1664 x 960
[ 17.355] (==) fglrx(0): Backing store disabled
[ 17.355] (II) Loading extension FGLRXEXTENSION
[ 17.355] (**) fglrx(0): DPMS enabled
[ 17.355] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 17.355] (**) fglrx(0): Textured Video is enabled.
[ 17.355] (II) LoadModule: "glesx"
[ 17.355] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 17.801] (II) Module glesx: vendor="X.Org Foundation"
[ 17.801] compiled for 1.4.99.906, module version = 1.0.0
[ 17.801] (II) Loading extension GLESX
[ 17.801] (II) fglrx(0): GLESX enableFlags = 528
[ 17.829] (II) fglrx(0): GLESX is enabled
[ 17.829] (II) fglrx(0): Acceleration enabled
[ 17.829] (II) LoadModule: "amdxmm"
[ 17.860] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 17.924] (II) Module amdxmm: vendor="X.Org Foundation"
[ 17.924] compiled for 1.8.99.905, module version = 1.0.0
[ 17.924] (II) Loading extension AMDXVOPL
[ 17.924] (II) Loading extension AMDXVBA
[ 17.943] (II) fglrx(0): UVD feature is enabled
[ 17.945] (II) fglrx(0): Enable composite support successfully
[ 17.945] (WW) fglrx(0): Option "VendorName" is not used
[ 17.945] (WW) fglrx(0): Option "ModelName" is not used
[ 17.945] (II) fglrx(0): X context handle = 0x1
[ 17.945] (II) fglrx(0): [DRI] installation complete
[ 17.945] (==) fglrx(0): Silken mouse enabled
[ 17.994] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 17.994] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 17.994] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 17.994] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 19.414] (--) RandR disabled
[ 19.414] (II) Initializing built-in extension Generic Event Extension
[ 19.414] (II) Initializing built-in extension SHAPE
[ 19.414] (II) Initializing built-in extension MIT-SHM
[ 19.414] (II) Initializing built-in extension XInputExtension
[ 19.414] (II) Initializing built-in extension XTEST
[ 19.414] (II) Initializing built-in extension BIG-REQUESTS
[ 19.415] (II) Initializing built-in extension SYNC
[ 19.415] (II) Initializing built-in extension XKEYBOARD
[ 19.415] (II) Initializing built-in extension XC-MISC
[ 19.415] (II) Initializing built-in extension SECURITY
[ 19.415] (II) Initializing built-in extension XINERAMA
[ 19.415] (II) Initializing built-in extension XFIXES
[ 19.415] (II) Initializing built-in extension RENDER
[ 19.415] (II) Initializing built-in extension RANDR
[ 19.415] (II) Initializing built-in extension COMPOSITE
[ 19.415] (II) Initializing built-in extension DAMAGE
[ 19.416] ukiDynamicMajor: found major device number 251
[ 19.417] ukiDynamicMajor: found major device number 251
[ 19.417] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 19.417] ukiOpenDevice: node name is /dev/ati/card0
[ 19.417] ukiOpenDevice: open result is 17, (OK)
[ 19.417] ukiOpenByBusid: ukiOpenMinor returns 17
[ 19.417] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 20.423]
Backtrace:
[ 20.553] 0: /usr/bin/X (xorg_backtrace+0x28) [0x49f1a8]
[ 20.553] 1: /usr/bin/X (0x400000+0x60239) [0x460239]
[ 20.553] 2: /lib/libpthread.so.0 (0x7f30158e9000+0xf1c0) [0x7f30158f81c0]
[ 20.553] 3: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x133d3bd) [0x7f300efcb3bd]
[ 20.553] 4: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x133e0ad) [0x7f300efcc0ad]
[ 20.553] 5: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x133e776) [0x7f300efcc776]
[ 20.553] 6: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x1399111) [0x7f300f027111]
[ 20.553] 7: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x1393dbe) [0x7f300f021dbe]
[ 20.553] 8: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x11e9e74) [0x7f300ee77e74]
[ 20.553] 9: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x11da94b) [0x7f300ee6894b]
[ 20.553] 10: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x1332d9) [0x7f300ddc12d9]
[ 20.553] 11: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x9c3dc4) [0x7f300e651dc4]
[ 20.553] 12: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x9c3f20) [0x7f300e651f20]
[ 20.553] 13: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (__driCreateNewScreen_20050727+0x999) [0x7f300efcedb9]
[ 20.553] 14: /usr/lib/xorg/modules/extensions/libglx.so (0x7f3013776000+0x1ab47) [0x7f3013790b47]
[ 20.553] 15: /usr/lib/xorg/modules/extensions/libglx.so (0x7f3013776000+0x1c2a5) [0x7f30137922a5]
[ 20.553] 16: /usr/bin/X (InitExtensions+0x91) [0x484711]
[ 20.553] 17: /usr/bin/X (0x400000+0x21133) [0x421133]
[ 20.553] 18: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f301486ec4d]
[ 20.553] 19: /usr/bin/X (0x400000+0x20e79) [0x420e79]
[ 20.554] Floating point exception at address 0x7f300efcb3bd
[ 20.554]
Fatal server error:
[ 20.554] Caught signal 8 (Floating point exception). Server aborting
[ 20.554]
[ 20.554]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 20.554] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 20.554]
[ 20.554] (II) fglrx(0): Backup framebuffer data.
[ 20.555] (II) fglrx(0): Backup complete.
My xorg.conf file (generated by aticonfig --initial)
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
And my lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M96 [Mobility Radeon HD 4650]
01:00.1 Audio device: ATI Technologies Inc RV710/730
06:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
08:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 14)
0a:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0a:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0a:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
Relevant line is:
01:00.0 VGA compatible controller: ATI Technologies Inc M96 [Mobility Radeon HD 4650]
Any help would be greatly appreciated.
I also tried disabling dri in xorg.conf, since dri appears in the backtrace for the error. That resulted in a segfault coming from something related to gl, so I disabled all acceleration, and got a black screen.
Thanks!Was there a kernel update in a recent upgrade? If so, you need to rebuild the catalyst drivers.
-
Problem with regular crash with Xorg and nvidia
Hello!
I am using a archlinux distribution for about 5 years. There was sometime problems but now it is very unstable. Every reboot I have a crash of Xorgs and with this a crash of system. Log:
Backtrace:
0: /usr/bin/Xorg (xorg_backtrace+0x3b) [0x809bdab]
1: /usr/bin/Xorg (0x8048000+0x520f5) [0x809a0f5]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb78d840c]
3: /usr/bin/Xorg (0x8048000+0x272a0) [0x806f2a0]
4: /usr/bin/Xorg (0x8048000+0x1a685) [0x8062685]
5: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb750db86]
6: /usr/bin/Xorg (0x8048000+0x1a271) [0x8062271]
Fatal server error:
Caught signal 3 (Quit). Server aborting
About 1 month ago it looks like restart of Xorgs when I press enter key. Alway ENTER key. After some updates/nvidia driver combinations - doesn't change anything. Now after fresh reinstall (well crashes destroys my ext3 filesystem an I need to reinstal the root file system) there are crashes, but now, every freeze I have to restart system. Now I am switchingo into ubuntu, I will try to check sometimes if something changed.
Cashes repeats every reboot from... maby 3-4 months. Now I can say my system is not stable, I use this in work - so this situation is really bad.
My configuration:
[mik@mik-l ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8600M GS] (rev a1)
04:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
06:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
06:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
06:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
06:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
06:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
I am using compiz and emerald.
greetes
AleExtra
Sorry for my poor english - I always read documentation, not writing this.well, after some time, the crach come back. In work I have fully updated system, in home, I wont update system, because of this problem.
On random (I think) enter it crached:
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Backtrace:
0: /usr/bin/Xorg (xorg_backtrace+0x3b) [0x809f81b]
1: /usr/bin/Xorg (0x8048000+0x54745) [0x809c745]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb787240c]
3: /usr/bin/Xorg (0x8048000+0x40170) [0x8088170]
4: /usr/bin/Xorg (0x8048000+0x1a705) [0x8062705]
5: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7466c76]
6: /usr/bin/Xorg (0x8048000+0x1a2f1) [0x80622f1]
Fatal server error:
Caught signal 3 (Quit). Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) BTC USB Multimedia Keyboard: Close
(II) UnloadModule: "evdev"
(II) BTC USB Multimedia Keyboard: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
and restart Xorg -
Intel 82845G and xorg 1.8 - anyone got it working?
By 'working' I mean 'not crashing'. I can install xorg 1.8 just fine, but rebooting every half an hour is not my thing. The crashes happen even if I'm just typing away at the xterm.
[karol@black ~]$ lspci -v | grep -i -A8 VGA
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) (prog-if 00 [VGA controller])
Subsystem: IBM NetVista A30p
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at 88000000 (32-bit, prefetchable) [size=128M]
Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
There are some bug reports in both our and upstream bugtrackers but the issues are still open.
I'm quite happy w/ xorg 1.6 I have so it's not a life-or-death situation by any means. If you got it working, please tell me how you did it - there's a myriad of "switches" to flip and I'm too lazy / busy to try them all out. I've tried a few and got nowhere, so I'm asking you, my fellow Archers.Same hardware here, having this issue for about two years now with linux in general, about six months ago I start using arch, to my surprise it didn't crash that much and when it did a least it took me to the console login, so no data was lost. a month ago I switch to arch completely and just for the fun of it I have four arch DE in my single computer the results are as follow:
Gnome=no crashes smooth performance even with composite enabled (the simple one build in gnome)
KDE=freezes on some heavy loaded webpages with flash media, a strange garbaged screen occurs when I am using some software in root mode like dolphin then it crash and takes me to login window. this could be kde I have no idea.
Xfce=freezes with heavy flash media once in a while. can be restarted by killing x.
LXDE=no crashes/freezes (I use it just for internet surfing)
all of the above with up to date software.
Coming from Ubuntu lucid I may said that the driver has been improved, and probably cutting the fat out of the system may improve performance. I use gnome as my main system and all I can say is that finally I can use my computer for something else other than trying to fix xorg and intel. I was really moved to buy a new one but Arch just give me some more juice out of this old machine. same intel card than described in the first post. this is definitely not my Ubuntu 8.04 which was flying in amazing compositing effects but a least is back to a tool I can work on.
All of my systems are fresh installs, all of them with the xorg 1.8 and the ..34.. kernel since the beginning, there is no xorg.conf file on any, I haven't had a crash in which I need to do a hard restart. -
Wizardpen and Xorg 1.8.1, Genius Tablet problem and solution
Hello!!! I post this information just to contribute with a solution to a problem I was fighting with in the last days. I search for an answer and did not find it. If someone need more information feel free to ask. Oh! And sorry for my english.
The Problem:
After the update of Xorg and the Wizardpen driver from the AUR my tablet was not working anymore. The hal policy did not work, because Xorg now uses other method for hotplugged devices. If you want to learn more read this http://wiki.archlinux.org/index.php/Xorg#InputClasses
Solution:
We have to tell Xorg wich is the driver for that device creating an InputClass. To do that, we need some info about the tablet first. Execute:
grep -i name /proc/bus/input/devices
and search for a line with the name of your tablet. In my case is:
Name="UC-LOGIC Tablet WP8060U"
Now we need to calibrate the tablet, first execute:
cat /proc/bus/input/devices
And search for a devices with the name you see before. In my case:
I: Bus=0003 Vendor=5543 Product=0005 Version=0100
N: Name="UC-LOGIC Tablet WP8060U"
P: Phys=usb-0000:00:02.0-3/input0
S: Sysfs=/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input5
U: Uniq=
H: Handlers=mouse0 event5
B: EV=1f
B: KEY=c01 0 3f0001 0 0 0 0 0 0 0 0
B: REL=303
B: ABS=100000f
B: MSC=10
See the line "H: Handlers=mouse0 event5". The last part tells you the device is in event5 (note that we do not use the mouse0), in your case could be other. Use this info to execute the next command with your event number:
wizard-calibrate /dev/input/event5
Follow the on screen instruccions (press the pen on a corner of the tablet and on the oposite corner). The last lines of the output look like this:
Driver "wizardpen"
Option "TopX" "2691"
Option "TopY" "3249"
Option "BottomX" "31462"
Option "BottomY" "30089"
Option "MaxX" "31462"
Option "MaxY" "30089"
We will use this info in a moment.
Later create a text file /etc/X11/xorg.conf.d/70-wizardpen.conf and put this content in it, but remember to change the text "THE NAME OF YOUR TABLET" to match the name you find previously and the configuration of your tablet calibration:
Section "InputClass"
Identifier "wizardpen"
MatchProduct "THE NAME OF YOUR TABLET"
MatchDevicePath "/dev/input/event*"
Driver "wizardpen"
Option "TopX" "2691"
Option "TopY" "3249"
Option "BottomX" "31462"
Option "BottomY" "30089"
Option "MaxX" "31462"
Option "MaxY" "30089"
EndSection
Section "InputClass"
Identifier "wizardpen ignore mouse dev"
MatchProduct "THE NAME OF YOUR TABLET"
MatchDevicePath "/dev/input/mouse*"
Driver ""
EndSection
In my case the file is
Section "InputClass"
Identifier "wizardpen"
MatchProduct "UC-LOGIC Tablet WP8060U"
MatchDevicePath "/dev/input/event*"
Driver "wizardpen"
Option "TopX" "2691"
Option "TopY" "3249"
Option "BottomX" "31462"
Option "BottomY" "30089"
Option "MaxX" "31462"
Option "MaxY" "30089"
EndSection
Section "InputClass"
Identifier "wizardpen ignore mouse dev"
MatchProduct "UC-LOGIC Tablet WP8060U"
MatchDevicePath "/dev/input/mouse*"
Driver ""
EndSection
Restart X or restart your computer and that's all. MY TABLET WORKS!!!
I read somewhere else, I don't remember where, that you can set other match sentences for Xorg that do not work for me, for some reason this is false for my tablet so I did not use this but for you may work. Inside the "Section" -> "EndSection" you can try to put this "Match" sentences in case Xorg failed to recognize your device.
MatchIsTablet "on"
MatchVendor "UC-LOGIC|KYE Systems|Ace Cad"
MatchDevicePath "/dev/input/by-id/usb-UC-LOGIC_Tablet_WP8060U-event-mouse"
The last one is obtained whit this command:
ls /dev/input/by-id
search for two devices, one called usb-name_of_your_tablet-event-mouse and other called usb-name_of_your_tablet-mouse, in my case the output of the "ls /dev/input/by-id" command is:
usb-UC-LOGIC_Tablet_WP8060U-event-mouse
usb-UC-LOGIC_Tablet_WP8060U-mouse
If you want to try you have to put those devices names in the right place, note that this not work for me. The file /etc/X11/xorg.conf.d/70-wizardpen.conf would be like this, remember to change the device path to match yours:
Section "InputClass"
Identifier "wizardpen"
MatchIsTablet "on"
MatchDevicePath "/dev/input/by-id/usb-UC-LOGIC_Tablet_WP8060U-event-mouse"
MatchVendor "UC-LOGIC|KYE Systems|Ace Cad"
Driver "wizardpen"
Option "TopX" "2691"
Option "TopY" "3249"
Option "BottomX" "31462"
Option "BottomY" "30089"
Option "MaxX" "31462"
Option "MaxY" "30089"
EndSection
Section "InputClass"
Identifier "wizardpen ignore mouse dev"
MatchIsTablet "on"
MatchDevicePath "/dev/input/by-id/usb-UC-LOGIC_Tablet_WP8060U-mouse"
MatchVendor "UC-LOGIC|KYE Systems|Ace Cad"
Driver ""
EndSection
Ok, I hope someone find this usefull, good luck!
Last edited by gooze (2010-06-25 18:55:18)I updated the driver to the last version in AUR. It works without any configuration at me (no calibration or custom xorg.conf entries). I tried with xorg-server 1.9+ only, though.
-
I'm running Solaris Express 10 x86 4/05 on a Dell Optiplex GX260. Xorg refuses to give me a refresh rate higher than 60Hz. This is using the i810 driver but it also happens with the VESA driver. Here's my xorg.conf:
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "bitstream"
Load "type1"
# Load "speedo"
# This loads the Xst module
Load "Xst"
# This loads the SolarisIA module
Load "IA"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/X11/lib/X11/fonts/TrueType/"
FontPath "/usr/X11/lib/X11/fonts/Type1/"
FontPath "/usr/X11/lib/X11/fonts/Type1/sun/"
FontPath "/usr/X11/lib/X11/fonts/F3bitmaps/"
FontPath "/usr/X11/lib/X11/fonts/misc/"
FontPath "/usr/X11/lib/X11/fonts/100dpi/"
FontPath "/usr/X11/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11/lib/X11/fonts/local/"
# FontPath "/usr/X11/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-85
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 48-120
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** Intel i810 (generic) [i810]"
Driver "i810"
VideoRam 8192
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** Intel i810 (generic) [i810]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSectionIf I use the Xsun server, everything works great. I get 1024x768 at 85Hz. With Xorg, I get 1024x768 at 60Hz. Why won't Xorg drive the display at a decent refresh rate?
Thanks.I upped the log verbosity on Xorg and checked the Xorg.0.log file. I found some interesting things.
First, I found this line:
(II) I810(0): Will use BIOS call 0x5f05 to set refresh rates for CRTs.
Later on, I found these:
(WW) I810(0): Extended BIOS function 0x5f05 not supported.
(II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method.
(WW) I810(0): Set VBE Mode rejected this modeline.
Trying standard mode instead!
Presumably, "standard mode" is an eye-watering 60Hz.
This is on a Dell Optiplex GX260 with BIOS revision A09. The video chipset is an onboard Intel 82845 and the driver is Xorg's i810.
Everything works fine with Sun's X server. I get a nice 87Hz refresh at 1024x768. I'm surprised that Xorg can't set the refresh on this machine. It's listed as Test Suite Level 2 certified in the HCL. Unless somebody can tell me what I'm doing wrong here, I'm going to post this incompatibility as a comment on the HCL. -
Can you run Window Maker with new xorg?
Each time I try to run it I see just window with information that Window Maker segfaulted.
I deleted GNUstep in my home, then called wmaker.conf, but that didn't help.
Yesterday I updated Window Maker, because new package appeared, but that also didn't help.
Any ideas?yup, wmaker and xorg both from testing work together
-
X crashes after last Kernel, Xorg and Nivida update despite downgrade
Hey,
Since I upgraded my system two days ago with the kernel 3.1.4, nvidia 289.05.09.3 and Xorg 1.11.2-1 my X kept crashing passed login from SLIM. I Downgraded all those packages and dependencies to the last working version for me, but I keep getting the error.
I would appreciate some pointers because I'm not even sure of what's causing the crash. Thanks !
This is where it happens in the logs: Xorg.0.log:
[ 35.331] (**) Option "xkb_rules" "evdev"
[ 35.331] (**) Option "xkb_model" "evdev"
[ 35.331] (**) Option "xkb_layout" "gb"
[ 35.332] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 35.332] (II) No input driver/identifier specified (ignoring)
[ 38.550] (II) Power Button: Close
[ 38.550] (II) UnloadModule: "evdev"
[ 38.550] (II) Unloading evdev
[ 38.603] (II) Power Button: Close
[ 38.603] (II) UnloadModule: "evdev"
[ 38.603] (II) Unloading evdev
[ 38.710] (II) PIXART USB OPTICAL MOUSE: Close
[ 38.710] (II) UnloadModule: "evdev"
[ 38.710] (II) Unloading evdev
[ 38.710]
Backtrace:
[ 38.741] 0: /usr/bin/X (xorg_backtrace+0x26) [0x566aa6]
[ 38.741] 1: /usr/bin/X (0x400000+0x16a709) [0x56a709]
[ 38.741] 2: /lib/libpthread.so.0 (0x7f0aa5130000+0xf850) [0x7f0aa513f850]
[ 38.741] 3: /lib/libc.so.6 (0x7f0aa4054000+0x1207b4) [0x7f0aa41747b4]
[ 38.741] 4: /usr/bin/X (mieqEnqueue+0x8c) [0x5472ac]
[ 38.741] 5: /usr/bin/X (0x400000+0x46f24) [0x446f24]
[ 38.741] 6: /usr/bin/X (xf86PostKeyboardEvent+0x4b) [0x48215b]
[ 38.741] 7: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f0a9e646000+0x481e) [0x7f0a9e64a81e]
[ 38.741] 8: /usr/bin/X (0x400000+0x6c9a7) [0x46c9a7]
[ 38.741] 9: /usr/bin/X (0x400000+0x9258e) [0x49258e]
[ 38.741] 10: /lib/libpthread.so.0 (0x7f0aa5130000+0xf850) [0x7f0aa513f850]
[ 38.741] 11: /usr/bin/X (0x400000+0x16abe0) [0x56abe0]
[ 38.741] 12: /lib/libpthread.so.0 (0x7f0aa5130000+0xf850) [0x7f0aa513f850]
[ 38.741] 13: /lib/libc.so.6 (sigprocmask+0x10) [0x7f0aa4088c20]
[ 38.741] 14: /usr/bin/X (0x400000+0x2948c) [0x42948c]
[ 38.741] 15: /usr/bin/X (0x400000+0x29a01) [0x429a01]
[ 38.741] 16: /usr/bin/X (0x400000+0x22f2c) [0x422f2c]
[ 38.741] 17: /lib/libc.so.6 (__libc_start_main+0xed) [0x7f0aa407517d]
[ 38.741] 18: /usr/bin/X (0x400000+0x231ad) [0x4231ad]
[ 38.741] Segmentation fault at address 0x10
[ 38.741]
Fatal server error:
[ 38.741] Caught signal 11 (Segmentation fault). Server aborting
[ 38.741]
[ 38.741]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 38.741] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 38.741]
[ 38.790] (II) AT Translated Set 2 keyboard: Close
[ 38.790] (II) UnloadModule: "evdev"
[ 38.790] (II) Unloading evdev
[ 39.043] Server terminated with error (1). Closing log file.meh That was evdev's fault.
Maybe you are looking for
-
Copyright symbol in XML Publisher report
Hi All, I have the following requirement in XML Publisher report, The user may include © (Copyright) symbol in the goal section (performance management module) and save it to oracle. It is storing in oracle correctly and i am seeing the ascii char is
-
Reversing document through FB08
Hi, when I am trying to reverse one document the system is giving error. Cost center VSNL/INHQSSUILD blocked against direct postings on 01.12.2007 Message no. KI260 Diagnosis Cost center INHQSSUILD, controlling area VSNL is locked for primary posting
-
Mail 4.4 crashed with OSX 10.6.6 and exchange 2007
Hello *mail 4.4 crashed when I start it* *I use exchange 2007 ans OSX10.6.6* *Thanks you for your help* +Process: Mail [749]+ +Path: /Applications/Mail.app/Contents/MacOS/Mail+ +Identifier: com.apple.mail+ +Version: 4.4 (1082)+ +Build Info: Mail-1082
-
[SOLVED] Kernel 3.0 become 2.6.32.48-1-lts after update?
Hi everybody, After I updated my laptop yesterday, I can not change the screen resolution. It is only 1024*768 while the maximum is 1336*768. Then I figure out the kernel was downgraded from 3.0 to arch 2.6.32.48-1-lts. In the /boot folder, I only fi
-
TS3694 Error while updating iphone 4 to ios6 , an unknown error occurred 3194
an unknown error occurred 3194 ...while updating to ios 6