New Z* field in selection of MB51

Hello,
we added new Z* field in selection of MB51 (SPRO -> Materials Mgmt -> Inventory Mgmt & Pyhsyical Inv -> Reporting -> Define field selection for material document list) but in selection of MB51 this field does not have any text only technical name. Could you tell what it is reason?
Thank you

are you saying u have appended a new field in mseg and mkpf and this Z field is then also added in the MB51 reporting via the node u mentioned but still the techincal name is visble although u have mentioned the name/label in data element and its active.
U may get in touch with abap team as its possible to change the name of a field via tcode CMOD /SMOD i have seen one abaper doing that but dont remeber the procedure to do that ....

Similar Messages

Adding a new input field on selection screen after input in a select option

Hi Experts,
There are 2 input fields on the selection screen.
I would like to add a new select option field when a value is entered in the 2nd field <b>only</b>. If there is an input in the 1st field or both the fields, the new input field should not appear.
Message was edited by:
        Gaurav Kothari

execute the code .
you will get sel option for s_lgort only when there is a value in s_werks.
tables mard.
select-options: s_matnr for mard-matnr,
                s_werks for mard-werks,
                s_lgort for mard-lgort modif id abc.
at selection-screen output.
if not s_werks[] is initial and s_matnr[] is initial.
loop at screen.
if screen-group1 = 'ABC'.
screen-active = '1'.
modify screen.
endif.
endloop.
else.
loop at screen.
if screen-group1 = 'ABC'.
screen-active = '0'.
modify screen.
endif.
endloop.
endif.

How to add a new tab(field ) in selecting ranked list(cj20n)

Hi,
I want to add a tab/field for position of employee while selecting ranked list.As i have to select employees on the basis of their skills and positions .I have used requirement profile but it is selecting on the basis of skils and not on the basis of position.
If I select Item tab it selects on the basis of Positions But i want to select on the combination of both skills and positions.
So i want to add field (position ) when it shows ranked list of employees.
Thanks

Hi
I'll try to explain better my need.
I've 10 CO-PA Key-Figures used to Split in the Cost of a material in different Cost Items.
Using the customizing I fill these key-figures using some rules.
The new requirement is use SOMETIME the same KF, by displaying different Costs overwritting the original values using the exit ZXYEXF05. But I need to know when the user wants consider the original value of KF, and when he wants overwrite these values (when I have to run teh exit). So I thought to create a new Selection-screen field (Char1), to permit to the user to pass to some report this user request. I thought to define a global variable, and add it to several reports when this feature is required.
Can you suggest a better solution ???
I could create some empty KF and fill them using teh exit, but I would prefer not expand the CO-PA structure.
Thanks for help.
Claudio

Add new field as selection parameter in HUMO report

Dear Experts,
We have arequirement to add a new selection criteria in a standard report HUMO.
We need to add a new filtering field from VEPO table.
How can we do this without going for development.
Please suggest
Regards,
Shashidhar

Hi Sashidhar,
First go to the program RHU_HELP and you need to enhance the code using the enhancement technique using implicit enhancement. You can add your new selection criteria at line no 257( need to create an new implicit enhancement).
Hope this is helpful for you.
Regards,
Ramesh.

How can I add a new field in selection screen for this report

*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
        mseg,
        mch1,
        *mch1,
        mkpf,
        mchb ,
        makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
      wa_message_tab type esp1_message_wa_type ,
      sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout   type slis_layout_alv                     ,
      gt_fldcat   type slis_t_fieldcat_alv with header line,
      gt_header   type slis_t_listheader   with header line,
      gt_sortin   type slis_t_sortinfo_alv with header line,
      g_repid     like sy-repid                            .
define add-fieldcat.
gt_fldcat-fieldname     = &1.
gt_fldcat-ref_tabname   = &2.
gt_fldcat-seltext_s     = &3.
gt_fldcat-seltext_m     = &3.
gt_fldcat-seltext_l     = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt       = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
        sel   type xfeld,
        matnr type matnr,
        maktx type maktx,
        charg type charg_d,
        menge type menge_d,
        erfmg type erfmg,
       end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
      gv_code   like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
      gv_matdoc type bapi2017_gm_head_ret-mat_doc,
      gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
      with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
   exporting
     input = 'Z_ORAN'
   importing
     output = v_atinn.
call screen 100.
*&      Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
    mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule.                 " status_0100 OUTPUT
*&      Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
         screen      like screen,
         index       type i,
         selected(1) type c,
         vislength   like icon-oleng,
         invisible(1) type c,
       end   of cols.
case ok_code.
    when 'DELE'.
      delete itab where sel eq 'X'.
    when 'ENTE'.
      check *mch1-charg is not initial.
      read table itab into witab with key charg = *mch1-charg.
      if not sy-subrc is initial.
        witab-charg = *mch1-charg.
        select single matnr from mch1 into witab-matnr
                           where charg eq witab-charg.
        if not syst-subrc is initial.
          set cursor field '*MCH1-CHARG'.
          message e115(12) with *mch1-charg.
        endif.
        select single maktx from makt into witab-maktx
                           where matnr eq witab-matnr
                             and spras eq syst-langu.
        witab-erfmg = 1.
        concatenate witab-matnr witab-charg into lv_objek .
        clear ls_inob .
        select single * into ls_inob
                        from inob
                        where objek = lv_objek and
                              klart = '023'    and
                              obtab = 'MCH1' .
        select single atflv from ausp into witab-menge
                 where objek = ls_inob-cuobj and
                       klart = '023' .
        append witab to itab.
**added
        clear *mch1-charg.
**added
      endif.
    when 'SAVE'.
      if mkpf-budat is initial.
        set cursor field 'MKPF-BUDAT'.
        message e055(00).
      endif.
      if mseg-lgort is initial.
        set cursor field 'MSEG-LGORT'.
        message e055(00).
      endif.
      if mseg-umlgo is initial.
        set cursor field 'MSEG-UMLGO'.
        message e055(00).
      endif.
      if mseg-bwart is initial.
        set cursor field 'MSEG-BWART'.
        message e055(00).
      endif.
      refresh imseg.
      loop at itab into witab.
        move-corresponding witab to wmseg.
        append wmseg to imseg.
      endloop.
      call function 'ZMM_POPUP_WITH_DATA'
        exporting
          imseg = imseg
        importing
          answer = answer.
      if answer eq 'Y'.
        perform create_goods_movement.
      endif.
    when 'P--'.
      clear ok_code.
      perform paging using 'P--'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P-'.
      clear ok_code.
      perform paging using 'P-'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P+'.
      clear ok_code.
      clear lines.
      perform paging using 'P+'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P++'.
      clear ok_code.
      perform paging using 'P++'.
      set cursor field 'MARA-MATNR' line 1.
    when 'SORA'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab ascending by (field).
      endif.
    when 'SORZ'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab descending by (field).
      endif.
    when 'PRNT'.
      perform write_alv.
endcase.
endmodule.                 " user_command_0100 INPUT
*&      Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule.                 " read_table OUTPUT
*&      Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule.                 " write_table INPUT
*&      Module exit INPUT
module exit input.
leave to screen 0 .
endmodule.                 " exit INPUT
*&      Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
    i_goodsmvt_items-material   = witab-matnr.
    i_goodsmvt_items-entry_qnt = witab-erfmg.
    i_goodsmvt_items-entry_uom = 'ST'.
    i_goodsmvt_items-move_type = mseg-bwart.
    i_goodsmvt_items-plant      = mseg-werks.
    i_goodsmvt_items-stge_loc   = mseg-lgort.
    i_goodsmvt_items-move_plant = mseg-umwrk.
    i_goodsmvt_items-move_stloc = mseg-umlgo.
    i_goodsmvt_items-batch      = witab-charg.
    append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
    perform determine_bapi_code using mseg-bwart
                             changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header = gv_header
      goodsmvt_code    = gv_code
    importing
      goodsmvt_headret = gv_headret
      materialdocument = gv_matdoc
      matdocumentyear = gv_matyear
    tables
      goodsmvt_item    = i_goodsmvt_items
      return           = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
    exit.
endloop.
if sy-subrc ne 0.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_COMMIT'
      exporting
        wait = 'X'.
    wa_message_tab-msgid = 'M7'..
    wa_message_tab-msgty = 'S'.
    wa_message_tab-msgno = '060'.
    wa_message_tab-msgv1 = gv_matdoc.
    wa_message_tab-msgv2 = ''.
    wa_message_tab-msgv3 = ''.
    wa_message_tab-msgv4 = ''.
    append wa_message_tab to i_message_tab.
else.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
    loop at i_return.
      wa_message_tab-msgid = i_return-id.
      wa_message_tab-msgty = i_return-type.
      wa_message_tab-msgno = i_return-number.
      wa_message_tab-msgv1 = i_return-message_v1.
      wa_message_tab-msgv2 = i_return-message_v2.
      wa_message_tab-msgv3 = i_return-message_v3.
      wa_message_tab-msgv4 = i_return-message_v4.
      append wa_message_tab to i_message_tab.
    endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
    tables
      i_message_tab = i_message_tab.
endform.                    " create_goods_movement
*&      Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
    select single gmcode from t158g into p_code
    where tcode eq lt_t158b-tcode.
    if sy-subrc is initial.
      exit.
    endif.
endloop.
endform. " determine_bapi_code
*&      Form paging
form paging using code.
data: i type i,
        j type i.
case code.
    when 'P--'. tc_itab-top_line = 1.
    when 'P-'.
      tc_itab-top_line = tc_itab-top_line - line_count.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
    when 'P+'.
      i = tc_itab-top_line + line_count.
      j = tc_itab-lines - line_count + 1.
      if j le 0.
        j = 1.
      endif.
      if i le j.
        tc_itab-top_line = i.
      else.
        tc_itab-top_line = j.
      endif.
    when 'P++'.
      tc_itab-top_line = tc_itab-lines - line_count + 1.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
endcase.
endform.                    " paging
*&      Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra             = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_buffer_active        = ''
      i_callback_program     = g_repid
      i_save                 = 'A'
    i_callback_top_of_page = 'TOP_OF_PAGE'
      is_layout              = gs_layout
      it_fieldcat            = gt_fldcat[]
     it_sort                = gt_sortin[]
    tables
      t_outtab               = itab[].
endform.                    " write_alv
     Form find_list_header
form find_list_header.
data : v_datum(10),
         v_datlo(10),
         v_dathi(10),
         v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform.                    " find_list_header
     Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear   gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform.                    " fill_field_cat
     Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up            = 'X'.
gt_sortin-fieldname     = 'MATNR'. append gt_sortin.
endform.                    " fill_sortinfo
     Form top_of_page                                              *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      i_logo             = 'ZKUTAS'
      it_list_commentary = gt_header[].
endform.                    " top_of_page

HI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer

Impact of Addition of New Value Fields in the existing Op. Concern-COPA

Hi All,
Want to know the steps of adding new value fields in the existing operating concern in COPA?
What is the overall impact of addition of New Value fields in the running Operating Concern?
How do we test the addition of new value fields?
Is the addition of New Value fields to the running Operating Concern advisable?
Your support and advice is highly anticipated and appreciated.
Thanks & Regards
9819528669
Ohter details are as follows...
VALUE FIELDS : Defines the Structure of your Costs & Revenues. (Op. Concern 120 Value Fields)
1)     The client requires three new value fields to be created. Value fields for :
-     Other Airport Charges - International
-     Cargo Commission Cost
-     Personal Cost (Direct)
2)     What are the Steps involved in creation of new value fields? The steps are :
1)     Before creating new value field we need to check whether we can use already existing UNUSED value fields (There are 62 value fields created for the op concern 1000, in production the value fields TBUL1-L7 i.e. to be used (I assume) screen shot1 provided. My predecessor has used value field VV291, VV292, VV380 original description being TBUL3, TBUL4, and TBUL1. I believe he has changed the description in development client and created a transport request ref screen shot 2)
2)     You can create new value field thru T-Code KEA6 (4-5 characters beginning with VV) u2013 My predecessor has reused the value fields originally created he has not created new one I believe. please provide give your comments)
3)     Specify whether this field is for Currency or Quantity (currency defined in attribute of op concern and quantity defined by its own field u2013 unit of measure) u2013 My predecessor has configured the three value fields as Currency.
4)     Describe how the values in this field are aggregated over characteristics. (SUM, LAS, AVG) u2013 My predecessor has aggregated all the three value fields as SUM and they are in Active status.
5)     After the value field is created you have to add the value field (active status only) to the operating concern by Editing the Data Structure. (I guess this is done in the next step)
6)     Assign newly created Value fields to the Operating Concern u2013 T-Code KEA0 (In development client the value fields are assigned to the op concern 1000 refer screen shot 3. In the production client also those three value fields exist (does it mean they are assigned? your comments please.) As they have the original description TBUL3, TBUL4, and TBUL1 refer screen shot 4.
7)     After the Data Structure is defined you need to activate them. (creates plan vs actual database) u2013 Go to the data structure tab and Choose Activate. The status in dev client is Active with correct description but in the production client it is Active with the OLD description. After addition of the value field you need to regenerate the operating concern. T-Code KEA0 u2013 right?
8)     Condition Types are assigned to Value Fields? Donu2019t know u2013 T-Code KE45 (I think this is NOT required in our case u2013 Please give your comments)
9)     Define and Assign Valuation Strategy u2013 Cost assigned to Value fields u2013 T-Code KE4U (I think this is also NOT required in our case)
10)     Define PA Transfer Structure for Settlement u2013 T-Code KEI1 (This step is crucial u2013 I think I have to to include newly created value fields, but am not aware how to do it and what is the connectivity or what happens after this is done)
Note: My predecessor has created a Transport Request No# KEDK902167 for the value fields created by him.
3)     Whether my predecessor has performed all the steps for value field creation? How to test it and check that?
4)     If yes then, Do I need to perform additional configuration or can I proceed to transport it to Production?
5)     What is COPA Allocation Structure & PA Transfer Structure? Where and Why It is used?
6)     What are the different methods of cost and revenue allocations in SAP?
7)     I have checked the status of the value fields across clients, It is as followsu2026
     Value Field     Value Field For     Description     Development      Quality     Production
1     VV291     Other Airport Charges International     TBUL3     Exists      DNE     DNE
2     VV292     Cargo Commission Cost     TBUL4     Exists      DNE     DNE
3     VV380     Personal Cost u2013 Direct     TBUL1     Exists      DNE     DNE
#DNE : Does Not Exist (assumed since the description given to value field is not the same as in development client.)

HI sree,
ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
Thank You!
Best Regards,
pradheep.

New Value Field Transport

Experts,
How shall I transport a new value field I have created. Also, I have assigned this value field to one of the operating concern...
I understand it has to be transported via KE3i. After that needs to Select Operating Concern..after that I am confused what to select ??
Please advice
Amit

Hi,
If Value field is assigned to Data structure then you need to regenerate operating concern in KEAO. you cannot transport single value fields in COPA. All value fields which are assigned to Data structure are picked during transport.
Regards,
Sreekanth

Transporting New Value Fields in COPA

Hi All,
I have created new value fields in COPA and regenerated the Op Concern in Dev. I need help to transport them to Quality and then to Production.
Basically I need help on the Objects I need to select and pre-cautions I need to take.
Appreciate your help on this.
Thanks.
Sree

HI sree,
ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
Thank You!
Best Regards,
pradheep.

Transport COPA new value field

Hello SAP Experts,
I have created a new COPA value field. Now i would like to transport the same to Test (Acceptance or Quality) server, can you kindly let me know how can i proceed with this.
Your inputs are highly appreciable in this regard.
Many thanks in advance.
Regards,
Pavan Kumar P

Hi,
Please read note 131664 regarding the use transaction KE3I to transport operating concern structures.
In principle you can transport a new value field with a transport of an operating concern - part 'Structures: ABAP Repository objects' in transaction KE3I.
You need to perform the following steps:
1. Value field added in source system thro tcode KEA6
2. Regenerate the environment of operating concern in source system (tcode KEA0)
3. Transport using KE3I (select: ABAP repository objects)
4. Regenerate the environment of operating concern in target system.
Via transaction code KE3I you have the option to transport specific object classes. If you select 'Structures: ABAP Repository objects' the following settings are transported:
Cross-client objects in the SAP Repositiory
- Tables and structures of the operating concern (CE1xxxx - CE8xxxx)
- Domains and data elements for CO-PA characteristics
- Master data tables for CO-PA characteristics (without data)
Cross-client control tables
- CO-PA field catalog
- View directory
Normally we advise customer to add a new value field/characteristic to
DEV then transport to QAS and then transport to PRD. This ensures that
the operating concerns in the 3 systems are in sync.
regards
Waman

Adding new value fields to an existing and productive operating concern

Hi,
I would like to have 5 new value fields active in 4 out of 6 operating concerns that I am working with.
Is it correct that I could do this one of the following ways:
1. Use a value field that exists already in an operating concern and rename it?
In this case is it necessary to regenerate the operating concern?
Do I transport the change ?
2. Create an entirely new value field, and assign it to the operating concern?
Is it necessary to regenerate the operating concerns in question?
Do I transport the change?
3. Select a value field that is currently in the system but is not assigned to any operating concern eg some kind of SAP delivered value field? How do I assign it to the op con? Do I need to re gen the op con?
Which way is the best or is there a 4th option?
Thanks for your help in adviance
Regards
Aisling

Hi,
This note is a catalogue of notes of consulting notes where SAP tell you steps, reports to use and son . If you read them (these notes and related notes) you have the steps, guides, reports that you must use. Better advice. Try a solution with all steps in mind and check it in a quality enviroment. As you know there a lot of things in CO-PA concern (you have your own tables, with your own fields, your reports as KE2Rxxxx, and so on), your secondary indexes, etc.. , the best is try the solution in your Quality Enviroment (a quasi-clone of your production enviroment) and check the results (create SO, invoices, after modifications to check possible problems,...).
Regards,
Eduardo
pd: I forgot. If the size of tables (CE4xxxx, CE1XXXX, ...check them with DB02) are so big, get the opinion of a Basis Consultant. Surely in the before note there notes about this issue.
Edited by: Eduardo Hinojosa on Apr 23, 2010 2:41 PM

Additional field in selection screen of a abap query

Hi,
I am adding a new additional field in the selection screen through abap query(using transaction SQ02) which is of type VBRK-FKSTO.
The value entered can be 'X' or empty space.But the value which is entered in the selection screen is not getting reflected in the code.Kindly advice me on what needs to be done to capture the selection screen value in the code.
Regards,
S.Subasree

Hi
You can add new field in VFX3 selection screen as follow. In the report code we can see various explicit enahcement points provided by SAP.One of them is ENHANCEMENT-POINT sdblbddl_01 SPOTS es_sdblbddl STATIC. Here you can declare your selection screen parameters. Then in the processing i can see a call customer fucntion happening in VBSK_DISPALY which you can implement to add your logic.
Thanks
Nabheet

New Text Field To Be Added in Audit Management

Hi All,
I need to create new text fields in addition to the existing fields in Audit Management screen for all the audit components in the TEXT TAB in transaction PLMD_AUDIT.
I would like to know is it possible or not and if not possible then what is the alternate way to include more inofrmation.
Will be rewarded...
Regards,
Ram.

Hi Ram,
New text field can be added in the texts tab of plmd_audit transaction is achieved by ,
1) The following entries has to be maintained in the view V_TTXIDI Object, Id, Meaning.
Object-select cgpl_text
Id : you need to define(this id you will refer in the initial value of the attribute in the BADI-name of your text field).
Meaning : short description of your BADI.
save your entries & activate it.
2) Implement this BADI "PLM_AUDIT_TEXT_ID"
within the method "GET_TEXT_IDS" we need add our code for adding the new text fields.Within this method the code for standard text fields would be existing.
3) In the attributes tab of the ZCL_DEF_IM_PLM_AUDIT_TEXT_ID -class interface ,you need to pass the initial value,which has been defined in the view "V_TTXIDI".
4) Finally activate your BADI.The newly added text fields would be available in the PLMD_AUDIT tcode.
Hope this solves your requirement.
Regards,
Keerthi

How to Add/Concatenate to a text field, values selected in a combo box

I have a combo box form field that allows the user to select a value from a list and click on an Add button. The Add button should add/concatenate the vaue selected to a text field in order to create a list of values selected. I'm not sure how to do this using Javascript in Acrobat? I know I need to add the javascript to the Add button's Mouse Up action. Any help would be greatly appreciated. Thanks!

Thanks so much - it works!
>>> "Gilad D (try67)" <[email protected]> 9/25/2013 9:16 AM >>>
Re: How to Add/Concatenate to a text field, values selected in a combo box created by Gilad D (try67) ( http://forums.adobe.com/people/try67 ) in JavaScript - View the full discussion ( http://forums.adobe.com/message/5712118#5712118 )
Let's say the text field's name is "Text1", and the combo is called "Combo1". You can then use this code as the MouseUp script of the Add button:
var f1 = this.getField("Text1");
var f2 = this.getField("Combo1");
if (f1.value=="") f1.value = f2.value;
else f1.value = f1.value + ", " + f2.value;
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5712118#5712118
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5712118#5712118
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5712118#5712118. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in JavaScript by email ( mailto:[email protected].com ) or at Adobe Community ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=3286 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Adding a new text field in Shopping Cart screen

Hi,
I am new to SRM and I am working on SRM 5.0
My requirement is to add a text field for buyer's note with unlimited length similar to Approver's note in Shopping Cart screen.
I have seen in the forum that many have done this earlier and i need step by step procedure to complete this task.
I am able to create text field in Text Schema, but this field is not reflecting in shopping cart screen. Do i need to do any thing extra apart from maintaining in Text schema?
Can you please send the detailed procedure to do this task?
Thanks in advance.
Regards,
Vamsee

Hi Saritha,
Thank you for your help. In fact, i have gone through this link and followed the steps there. But, the Text ID is not reflecting in my shopping cart.
We are using SRM 5.0. The requirement is to add a new text field with unlimited length similar to the existing Approveru2019s note field in Shopping Cart screen at header level.
I have followed the steps mentioned below.
1.Go to SRM IMGSRM Server->Cross-Application Basic Settings->Text Schema
2.Execute Define Text Types and then select the entry BBP_PD Text Object and click on Text Type.
Here, create new entry for ID as ZHTXT and Description and save it.
3.Execute Define Text Schema and then select the existing Text Schema SC ( Shopping Cart) and click on Texts for Schema.
Here, assign the newly created Text ID with details Header/Item etc.
4.I am not executing the last step Define Fixed Values for Texts, as the Text Schema SC is already assigned Transaction Type Transaction Type SHC.
Please suggest do I need to perform any extra steps apart from Text Schema to reflect the Text ID which I created in my Shopping cart screen? Or do we need to code anything on ITS side?
Thanks in advance.
Regards,
Vamsee

Can't open new tab by going to file/new tab (or CTRL+T or clicking on the new tab field). Only way is to right click on a link and choose open in new tab.

Can't open new tab by going to file/new tab (or CTRL+T or clicking on the new tab field). Only way is to right click on a link and choose open in new tab.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

New Z* field in selection of MB51

Similar Messages

Maybe you are looking for