New z77a gd80 build with 3770k -startup loop problem - please help

I just got a new z77a gd 80, 3770k, and haf x case for my new build.  I put it all together and when i boot the fans and power go on the motherbard but it quickly shutn the sdown and retarts over and over again.  I removed the 3770k and put my 2600k in.  The same thing happens.  I uninstalled the z77a gd80 from the case and put my z68a gd80 board in with the 3770k chip.  samething.  i have tested the power supply by using my spare one.  this didn't help at all all.  i also switch the ram out.  That did not work either.  Please someone help.  I  am down my old pc and my new one now :(
Long shot - would leaving the doors open on the case for whatever weird reason cause this?  I know that sounds insane but i can't think of anything else.

Quote from: sewn on 15-December-12, 01:04:23
Xmad  USB 3.0 pins can make the board not boot?
I think it is the standoff screws because my old z68a board gets stuck in the boot loop.  See I install every whole in the haf x case with these screws.  I thought that is what i was supposed to do from the picture in the haf x manual.  I have now read you are only supposed to put the stand offs in the 9 screw holes not the entire board.
The extra stand off, bent cpu pins, or bent and shorted usb3.0 header pins can all cause a boot failure.

Similar Messages

  • Powerbook G4 12" 867mhz with dvd/cd drive problems - please help!

    Hello all,
    Just realized this thread should have been in this section. I put it in the using your powerbook section. Sorry for the double post. I just wanted it to be in the right section.
    I have just inherited a powerbook g4 from a family member who is upgrading to a new machine. It has dvd/cd drive problems. I'm totally new to OSX and a notebook machine and need some assistance. I've been briefly scanning the forums here and noticed problems with these drives on the model computer. Is there a way to fix this with an install of older software? Here is the problem, if I insert a cd into the super drive it mounts on the desktop, and itunes will play it but it skips and sounds very distorted. I haven't tried a dvd but was told it doesn't even see the dvds on the desktop. Here are the know specs on the machine:
    867mhz
    640 mb ram
    mac os x 10.5.1
    boot rom version 4.5.5f4
    the burner info: matshita dvd r uj-015
    firmware version: docb
    Thanks in advance!

    Good Morning Mac,
    According to your posted specs for the 12" G4PB you have the bare minimum requirements for Leopard. Even Tiger (10.4.11) should have 1GB RAM for decent performance (see my signature specs).
    An easily installed 1GB RAM stick can be obtained at either of these reliable vendors:
    http://eshop.macsales.com/ or http://www.crucial.com/
    However, we are getting ahead of ourselves. Try the following in this order:
    Repair Disk Permissions with /Applications/Utilities/Disk Utility/Repair DP, then do the following:
    Run Repair HD from original CD or DVD install disk ........
    Insert disk and re-start holding down the 'C' key until you see the spinning gear.
    At Installer level...... DO NOT CONTINUE
    At top left, use 'Utilities' Menu for Tiger or later and go 'Disk Utility'
    Select your HD volume with Operating system on...
    Select First Aid tab then select Repair Hard Disk button
    If "RED" errors are repaired, run again, until none are reported then +run again+ just to be sure you are OK
    Do NOT continue with the Installer... QUIT the Installer and return to the Finder ......... Eject the Disc
    RESTART ..... Repair Disk Permissions .... AGAIN!
    Try the above stuff first .... if that doesn't help, we will get into the "RESETS" steps next!
    DIXIE

  • Bex Query with Hierarchy on Workbook problem please help

    Hi all,
    I have a problem, Im trying to copy information from specific cells on a query that I opened using Analyser, heres the situation:
    Account            Amount    New Col
    22110200           15 dlls
    -22110201          4 dlls
    -22110202          5 dlls
    -22110204          6 dlls
    121101010000   1dlls          4 dlls
    121101020000   1dlls          5 dlls
    121101040000   1dlls          6 dlls
    4,5 and 6 dlls are amounts from the first 3 accounts, I tried simpy copying the information but for some reaseon when the report reloads the informacion is lost.
    Also I using Hierarchy to display the values so if I copy the value from cell Q700 the value will change is the levels on the Hierarchy are expanded.
    Is there anyway to do this? please help.
    Thanks in advance

    Hi,
    Thanks for the answer, Is it possible to call the Macro when the user Expands a node? or it needs to be called from a button or combination of keys?
    Thanks again

  • My iphone 5 is no longer charging with new apple cord and lint has been cleared. Please help.

    My iphone 5 is no longer charging with a new apple cord and lint has been cleared. Please help. It just started happening this week and I have tried everything. Is this a software / driver problem?  We all know the battery doesn't last a full day if you "use" your phone like a normal person. I am very frustrated! My daughters iphone 5 started doing this a few days later than mine as well.

    Not much help I'm afraid but I use my iPhone 5 like a 'normal' person and it's battery almost all day. Perhaps there's a hardware fault somewhere? Have you tried the usual reset and restore?

  • Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.

    Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
    Have tried all tricks found on the net and followed every advice from apple support.
    Still black screen with blinking curser when mini is rebooting following partitioning via bootcamp.
    Very nice and fast mashine, wouldnt like to return it.
    thanks allan

    Is that an Apple SSD?
    what model is it?
    Is there a firmware update if non Apple?
    Lion is not server version.
    Windows is ? ISO or retail?
    Google macmini Windows 7 SSD Apple Boot Camp

  • I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020  monochrome)

    I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020  monochrome)

    I had the exact same problem
    It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable

  • HT201493 How do I get my old apple ID/email from popping up and asking to verifie it's getting annoying? I've change everything to my new email an my old one keeps popping up please help me stop it from popping up all the time?

    How do I get my old apple ID/email from popping up and asking to verifie it's getting annoying? I've change everything to my new email an my old one keeps popping up please help me stop it from popping up all the time?

    Did you change the ID you are using for iCoud?  If so, did you delete the account, then sign back in with your new ID on your device?

  • Unable to update software or upload pics from SD card-how do I remove files from startup disk? Please help!

    Unable to update software or upload pics from SD card-how do I remove files from startup disk? Please help!

    Hello Smile_333
    The article below will assist with finding things and help increase the hard drive space for your computer. The best way is to have an external hard drive to copy things to if you do not want to delete and loose things.
    OS X Mountain Lion: Increase disk space
    http://support.apple.com/kb/PH10677
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I cant connect my new wimax usb stick bm328 on my macbook pro. please help me

    i cant connect my new wimax usb stick bm328 on my macbook pro. please help me

    The Hardware Test detected a RAM problem.  Take out the chips and make certain that the connections are clean and reinstall them.  Make certain that they are well seated. 
    If the problem occurs again, test with one chip at a time.  Also swap bays if necessary.
    Please indicate if you have installed new RAM and if so what brand and the specifications.
    Ciao.
    Message was edited by: OGELTHORPE

  • Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

    Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • 990fxa gd80 raid 0 problem please help me i am begging you

    so i will start with my set up
    990fxa dg80 mb
    fx 8350 cpu
    780ti
    8 gig of ram
    256 hdd
    2x samsung 850 evo
    750 hybrid drive
    So at this stage all my data is on the 750 hdd and the disk is stored away. my problem started with me buyng 2 mx100 256 ssds . If my bios is set to ide or ahci they work fine i had my windows instaled on 1 of them all woks fine. Once i switch my bios to raid ( before i set up my raid 0) boot up win 7 instalation i do not see any drives ( i know is normal) load the drivers for the raid controler (sb950 for w7 as it says in themanual) and only my 256 hdd shows up but not the ssds . Than i set them up in ld raid 0 same problem . Tryed on another 2 mbs ... 1 same and a gygabite same problem. So i was sure there is a problem with ssds. I got rid of them got 2 new 850 evo 250 gb same problem. please help me i am so desparate i am willing to pay woth body organs for help

    I..have a few questions...
    1. You set BIOS to the RAID mode, and under that option there's a Board SATA RAID ROM, do you set it as Legacy ROM?
    2. Did you enter Ctrl+F to initialize the drives/Delete Array(If they're used SSDs) and create RAID0?
    3. Is your Win7 64 bit or 32 bit?
    4. I assume it's 64 bit, did you copy the W764 folder for driver loading?
    And make sure you get the driver from here:
    http://www.msi.com/support/mb/990FXAGD80.html#down-driver&Win7 64

  • My apps wont open and i keep downloading new apps, hard resetting, syncing and nothing works! PLEASE HELP

    My apps wont open and i keep downloading new apps, hard resetting, syncing and nothing works! PLEASE HELP  

    Then restore the iPod.  First from backup and if problem persists, restore to factory defaults/new iPod.

  • HT2953 i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can  anyone please help?

    i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can  anyone please help?

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • Hi, All. Iam using Adobe Document Cloud. After saving a pdf document to this cloud, I am able to see my PC folders . How to disable this? Does my PC folders are also available across other PC's to access them with my Adobe ID? Please help me. Thanks

    Hi, All. Iam using Adobe Document Cloud. After saving a pdf document to this cloud, I am able to see my PC folders as well with a browsing option  . How to disable this? Does my PC folders will  also available across other PC's to access them with my Adobe ID? Please help me. Thanks in advance.

    Hi indi68632954,
    I can understand your concern & you need to worry about this, as your PC folders won't be available on other PC's as this option is just to browse through the files of the specific system on which you are working as shown in the screenshot below.
    Only the files uploaded on the Document cloud will be available over Internet using Adobe Document Cloud service upon the authentication of your Adobe ID & password.
    I hope this will answer your query.
    In case if you have any further query please let us know, we will be happy to assist you.
    Regards,
    Aadesh

  • I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

    I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

    I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

Maybe you are looking for

  • Refresh page after execute event

    Hi all, I have a question, please help. I have a button on the view SOHOverView(BT115H_SLSO) to change the status. *** part of code of event *** CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN'      EXPORTING        objnr               = objnr        user_st

  • Delta package not fetching all records from Delta queue in r/3

    Hello, I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system. The Delta has been initialized and everyday the delta is being moved from r/3. I observed that when I execute my delta package not all delta records are fetched i

  • Updating interactive PDFs from InDesign 6

    I designed a form in InDesign 6 and exported it as an interactive PDF. Can I revise the Indesign version and export it again without losing the additional formatting that I originally did in Acrobat Pro? For example, I altered the size of some boxes

  • Highlights and Shadow brush

    Hello, I'm trying out the Aperture 3.0 trial version, and have upgraded it to the latest patch 3.1.2. The problem I am having is with the Highlights & Shadows brush - it just won't apply any changes to the image. I can apply changes using the H&S bri

  • Problems with sending requests

    I cannot send requests from my N900 such as  *102# or *111*1# after typing in dialing mode and tryin to call I see only WRONG NUMBER and its not operator answer but from phone. Is there any different way to make such requests?