New ZENworks Configuration Management 11 Forums

Welcome to the new ZENworks Configuration Management 11 Forums.
Information about ZEN ZCM 11 can be found at http://www.novell.com/products/zenwo...tionmanagement
Thanks for participating in the Novell Forums and we hope your experience here is a good one.

Hi Shaun,
That is perfect..
Please can you put that somewhere obvious on the website, The web site
tries to break it down but it gets very confusing...
Thanks very much for the quick reply
Peter
On 2/02/11 4:59 PM, Shaun Pond wrote:
> Peter,
>
> product info: http://www.novell.com/products/zenworks/
>
> what features are in each edition:
> http://www.novell.com/documentation/...a/brkfw3r.html
>
> that should give you a good start...

Similar Messages

Configuration Managment Pack for Non Oracle Systems (new)

Hi ,
There is a pack called "Configuration Management" for the database. This pack manage hardware , software , updates, patches, etc for host that have installed any Oracle Software.
Now, in EM Release 2 there is a new pack "Configuration Managment Pack for Non Oracle Systems" wich basically will allow me to the same but without the requirement to have any Oracle software installed.
The question is : Where can i find a white paper about it? i been looking around and there is only mentions of the product, but not extra info. I know is out already 3k p/processor..
Any ideas?
Sergio Benavides

Found this dated Oct 2005
(Note the "priced in Advance of Availability" piece)
Standalone Managers
Configuration Management Pack for Non-Oracle Systems (priced in Advance of Availability) 2.375 522,59 Per Processor -
Provisioning Pack (priced in Advance of Availability) 2.375 522,59 Per Processor -
Service Level Management Pack (priced in Advance of Availability) 79 17,42 Test -
(Must license with Beacon Plus Test pricing) 2.375 522,59 Beacon -
System Monitoring Plug-in for Hosts (priced in Advance of Availability) 1.188 261,29 Per Processor -
System Monitoring Plug-in for Non Oracle Databases (priced in Advance of Availability) 1.188 261,29 Per Processor -
System Monitoring Plug-in for Non Oracle Middleware (priced in Advance of Availability)
25 1.188 261,29 Per Processor -
System Monitoring Plug-in for Network Devices (priced in Advance of Availability)
26 1.188 261,29 Per Network Device -
System Monitoring Plug-in for Storage (priced in Advance of Availability)
27

Zenworks Desktop Management for Windows 7

Hello,
We are trying to figure out what is the solution for Windows 7. We are currently in a Novell environment (I believe Zenworks 7). Being unfamiliar with the Zenworks Desktop Management - can someone please explain the following to me:
We are trying to find the application launcher answer to deploying on Windows 7. Whenever I run the ZfDAgent.msi (7 agent/Zenworks Desktop Management) on a Windows 7 (Enterprise) machine, it says the following:
"The Remote Management Mirror Driver can only be installed on Windows 2000and Windows XP machines". Is there a new version of the Zenworks Desktop management software available/coming out for Windows 7?
Any help is greatly appreciated!

Originally Posted by ketter
On Mon, 17 May 2010 20:36:02 GMT, Yappy70
<[email protected]> wrote:
>
>Hello,
>
>We are trying to figure out what is the solution for Windows 7. We are
>currently in a Novell environment (I believe Zenworks 7). Being
>unfamiliar with the Zenworks Desktop Management - can someone please
>explain the following to me:
>
>We are trying to find the application launcher answer to deploying on
>Windows 7. Whenever I run the ZfDAgent.msi (7 agent/Zenworks Desktop
>Management) on a Windows 7 (Enterprise) machine, it says the following:
>
>"The Remote Management Mirror Driver can only be installed on Windows
>2000and Windows XP machines". Is there a new version of the Zenworks
>Desktop management software available/coming out for Windows 7?
>
>Any help is greatly appreciated!
Windows 7 is not supported on Zenworks for Desktops 7. You will need
to upgrade to Zeworks Configuration Management 10. I'm in the middle
of doing this myself right now.
Regards,
Ken
Thanks for the quick reply -- by chance have you ran across any white papers, webcasts, or documentation as to the desktop application features included with Zenworks Configuration Management 10? Such as how the application explorer/window are handled with this new version? I tried doing a search to no avail.
Thanks for any suggestions!

Kerberos Configuration Manager for SQL Server: Access of system information failed!

I'm trying to use the new Kerberos Configuration Manager for SQL Server tool that was released recently to verify SPN on several SQL Servers, but any time I attempt to connect to a server I get the following error in the log:
6/24/2013 3:48:22 PM Info: Connect to WMI, \\<HOSTNAME>\root\cimv2
6/24/2013 3:48:25 PM Error: Access of system information failed System.DirectoryServices.AccountManagement.PrincipalOperationException: An error (1332) occurred while enumerating the group membership. The member's SID could not be resolved.
at System.DirectoryServices.AccountManagement.SAMMembersSet.IsLocalMember(Byte[] sid)
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNextLocal()
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNext()
at System.DirectoryServices.AccountManagement.FindResultEnumerator`1.MoveNext()
at System.Linq.Enumerable.Contains[TSource](IEnumerable`1 source, TSource value, IEqualityComparer`1 comparer)
at KerberosCM.WMIHelper.isUserLocalAdmin(SystemInfo si, UserPrincipal user)
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
6/24/2013 3:48:25 PM Error: Error System.Exception: Access of system information failed!
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
at KerberosCM.SystemInfo.GetInfo()
at KerberosConfigMgr.Utility.Login(String serverName, String login, String password, Boolean isCmdLine, Form uiForm)
Things I have tried to resolve this:
1. Verified that my account is a Domain Admin.
2. Attempt to connect locally without inputting any information for server/user/pw
3. Attempt to connect remotely using server/user/pw
I always receive the same error message and log: Access of system information failed!
Has anyone else run into this issue?

Update to this:
There were some invalid user accounts added to the Local Administrators group only showing up as a GUID. This caused the enumeration of the group to fail and generate the error in my original post. Removing those user accounts from the Administrators group
got past the enumeration error.
However, now when attempting to connect to the servers (locally or remotely) I get this error:
6/27/2013 10:24:24 AM Info: Connect to WMI, \root\cimv2
6/27/2013 10:24:38 AM Error: Access of system information failed System.Runtime.InteropServices.COMException (0x80070035): The network path was not found.
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_AdsObject()
at System.DirectoryServices.PropertyValueCollection.PopulateList()
at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
at System.DirectoryServices.AccountManagement.SAMStoreCtx.ResolveCrossStoreRefToPrincipal(Object o)
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNextForeign()
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNext()
at System.DirectoryServices.AccountManagement.FindResultEnumerator`1.MoveNext()
at System.Linq.Enumerable.Contains[TSource](IEnumerable`1 source, TSource value, IEqualityComparer`1 comparer)
at KerberosCM.WMIHelper.isUserLocalAdmin(SystemInfo si, UserPrincipal user)
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
6/27/2013 10:24:38 AM Error: Error System.Exception: Access of system information failed!
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
at KerberosCM.SystemInfo.GetInfo()
at KerberosConfigMgr.Utility.Login(String serverName, String login, String password, Boolean isCmdLine, Form uiForm)

Why when I try to Build === Configuration Manager === Active solution platform === New does not open up a platform configuration window???

I have read that in order to process my .xlsx file using Microsoft.Jet.OLEDB.4.0 Connection String I need to create a "x86" Active Solution Platform.
Welllll, when I <Right-Click> on my Solution in Microsoft Visual Studio, and <Click> on
Configuration Manager and then <Click> the Active solution platform
and choose <New...> absolutely nothing happens. How can I try and create a new
Active solution platform if nothing happens and I don't get a dialog box or window?
Am I doing something wrong here?
Do I have a Setting that is incorrect?
Thanks for your review and am hopeful for a reply.
ITBobbyP85

Hi ITBobbyP85,
After testing the issue in my SSIS project, I also couldn’t add a new Active solution platform in the SSIS project.
As per my understanding, I think the Active solution platform doesn’t supported in Business Intelligence projects (SSAS, SSRS and SSIS). If the project is application project(C#, VB, etc.), by default, the target platform is x86. And we can also configure
the project to target to a 64-bit platform. For more details about how to configure projects to target platforms, please see:
http://msdn.microsoft.com/en-IN/library/ms185328.aspx
The following screenshots are for your references:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

[Forum FAQ] Configuration Manager Console shows nothing if you change SSRS to using SSL after Reporting Service Point is installed

If the SSRS is changed to SSL mode and http binding is removed after Reporting Service Point is installed. The Configuration Manager Console shows nothing in Reporting Pane. After digging into this problem, the cause is that the SSRS information has not
been updated in Configuration Manager Database. The following steps are taken for finding the root cause.
1. After changing to SSL, the Reporting Service Point log shows the error as shown in Figure 1.
The request failed with HTTP status 404: Not Found.
(!) SRS not detected as running
Failures reported during periodic health check by the SRS Server DB2.SCJIZHO.COM.
Figure 1
From the error, seems the cause was the Reporting Service Point detected a wrong port. We digged around in Registry and found the information is a Registry key named ReportServerUri at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP. After changing the Report
Server address to https. The error is gone as shown in Figure 2. But the issue remains, the Console still shows nothing. It is not a right direction.
Figure 2
2. Open the Console log file, it also shows some valuable information.
instance of __ExtendedStatus
                Operation = "ExecQuery";
                ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'PRI'";
                ProviderName = "WinMgmt";
\r\n
[1, PID:3136][04/24/2014 01:46:00] :Property: 'LastModifiedTime'\r\nSystem.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.PropertyData.RefreshPropertyInfo()
   at System.Management.PropertyDataCollection.get_Item(String propertyName)
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
[52, PID:3136][05/11/2014 20:14:15] :[ReportProxy] - User-specified default Reporting Point [PRI.scjizho.com] could not be found, [DB2.scjizho.com] is now the default Reporting Point (Figure 3).
Figure 3
It seems the Console wants to access the old http site and it fails to get into the site for sure. Actually, the Site Configuration information is come from Site Control File and as we all know that ConfigMgr 2012 doesn’t store the Site Control file in the
file system. However, it’s stored in the SQL database (as XML file). The XML file is stored in a view named vSMS_SC_SiteControlXML. This view is a read-only view. We cannot edit it directly. The related table stored the SSRS information for this view is SC_SysResUse_Property.
Running the following query will list the SSRS address. We can see the address is still the old one. This is why the Console shows nothing.
SELECT
name,
value2
FROM dbo.SC_SysResUse_Property
where name
='ReportServerUri'
or name=
'ReportManagerUri'
Remarks:
This article is just to let you know why the Console cannot show the Reports after changing to SSL mode. We do not intend to make you change the table in Database, if you want to change it, you will be at your own risk. The real solution to this situation
is to reinstall your Reporting Service Point.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Ok, but how do you solve this problem? Does uninstalling the RP and adding it back solve this problem?
http://www.enhansoft.com/

[Forum FAQ] WSUS Configuration Manager failed to subscribe to update categories and classifications on WSUS Server

Symptom:
You might see an error in Software Update Point Status Message when you run software updates synchronization. (Figure 1)
WSUS Configuration Manager failed to subscribe to update categories and classifications to WSUS Server “Server Name”
Figure 1
When you check the WCM.log, WSUSCtrl.log and wsyncmgr.log. There is an error in WCM.log-“Category Product:6d76a2a5-81fe-4829-b268-6eb307e40ef3 (Windows 7 Language Packs) not found
on WSUS”. (Figure 2)
WCM.log:
Figure 2
Cause:
Windows 7 language packs are available for computers that are running Windows 7 Ultimate or Windows 7 Enterprise. The Windows 7 language packs can be installed only from the Optional
Updates section in Windows Update. However, these language packs are not available on the Microsoft Windows Server Update Services (WSUS) server or through the Microsoft Download Center.
For more information, please review the link below:
Windows 7 language packs are available for computers that are running Windows 7 Ultimate or Windows 7 Enterprise
http://support.microsoft.com/kb/2534462/he
Resolution:
Go to Administration -> Overview -> Site Configuration -> Sites -> Right-click CAS -> Configure Site Components -> SUP Products tab, uncheck “Windows 7 Language
Packs”, then sync again. (Figure 3)
Figure 3
After Sync successfully, the “Windows 7 Language Packs” option disappeared. (Figure 4)
Figure 4
Alternative:
About installing Windows 7 language packs, you could use SCCM 2012 Package feature (download manually) or Windows Update.
http://windows.microsoft.com/en-HK/windows/language-packs#lptabs=win7
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

I managed to fix my issue by coping the Client, ClientUpgrade, and Scripts from the files from SCCM install discs folder SMSSETUP to c:\program files\Microsoft Configuration Manager folder. I noticed that some of the files in the scripts
folder was missing and I copied the other folders over because I felt that maybe my local copy of the Client installer where missing some key files as well. Once I did that and disabled software update push, restarted the wsus computer, and re-enabled
the software update push it was able to publish the client and start installing it that way.
I thing the initial log messages where pointing me in the wrong direction for a few hours because I was thinking it was permissions as well and kept trying to figure that out but in the end I do not believe any of that was the reason I was receiving the
same error as you where.

When converting over to HTTPS and PKI for clients, not all actions are available in configuration manager cpl

I'm not exactly sure which forum heading this should go under so if this isn't correct please let me know or move it on my behalf.
So I am trying to setup Internet Based Client Management in SCCM 2012 R2 and have come across a few articles on how to do so. I think I have mostly gotten it to work but I seem to be having a client issue when deploying new machines. My already
deployed servers seem to have picked up the PKI setting no problem. In the past when I would deploy a new windows client everything would be fine. When i converted over to PKI in my test environment I am now having issues when I go to deploy a
new windows client. I don't get all of the Actions listed in the Configuration Manager control panel. All I have are Discovery Data Collection, Machine Policy Retrieval and Eval, User Policy Retrieval and Eval, and Windows Installer Source list Update
Cycles, before all of them would populate no problem. I have let this machine sit here for several hours and nothing has changed yet. It does say PKI for client certificate. Sometimes when I would deploy new machines it would say NONE for
Client certificate. In my production environment it says self-signed. I have found if i uninstall the client and re-install the client it does populate all of the cycles but I don't understand why it is not working on deployment.
Ok so maybe not all the time that when i reinstall the client it fixes it. I just did an uninstall and reinstall on a test client and all it has under actions are machine and user policy cycles.
Does anyone have any ideas?

Hi,
I think SCCM client installed before the GPO applied, so you don't a certificate available when it is required.
You can export and import the certificate by using MDT integration, try this blog for PKI part:
How To: Build and Capture in Configuration Manager 2012 using HTTPS
And in addition, you can upload the log to your onedrive so you can share with us.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Configuration Manager 2012 R2 - SRS Reporting Services not configuring Report Server

Hi all,
I am running stand-alone primary site and remote (shared) SQL 2012 SP1 on Windows 2012 R2 Standard. Remote SQL server is currently hosting multiple instances and Configuratoin Manager is running on a custom instance. SCOM databases also co-exist on the same
SQL environment (different instance with SSRS installed & running perfectly).
After setting up the Reporting Services role on Configuration Manager environment, srsrpsetup.log & srsrpMSI.log states installation is successful. However, when monitoring srsrp.log file, we encounter the below message -
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 5232 (0x1470).
SMS_SRS_REPORTING_POINT 02/12/2014
07:44:00 7828 (0x1E94)
This is a SRS Reporting Point Role as SRSRP registry key exists.
SMS_SRS_REPORTING_POINT 02/12/2014 07:44:15
5232 (0x1470)
Waiting for changes for 0 minutes SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Timed Out... SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Check state SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Check server health. SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Registry change SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Timed Out... SMS_SRS_REPORTING_POINT
02/12/2014 07:45:15 5232 (0x1470)
Steps taken so far -
1. Switched reporting services to run from local system account to domain account.
2. Created new Report Server database on our instance and reconfigured Reporting Services to this DB.
3. Un-installed and re-installed Reporting Services role in Configuration Manager
4. Un-installed and re-installed SSRS on Configuration Manager (dedicated) SQL instance after removing Reporting Services role in CM12.
I have referred couple of links on forum and none seem to help resolve this issue.
Let me know if there is anything specific I missed out from my end. Appreciate any assistance.
Regards,
mittu

It seems that Reporting Services for SCOM and SCCM cannot co-exist on the same server (it sounds like a bad idea anyway)
http://www.systemcentercentral.com/system-center-2012using-a-common-sql-backend-database-sysctr-scom-scsm/
https://social.technet.microsoft.com/Forums/en-US/7e6b5ae9-04c8-4c5d-a77f-9f5208d4e65f/is-it-possible-to-deploy-2-scom-2012-r2-reporting-in-a-sql-server-which-already-has-scom-reporting?forum=operationsmanagerreporting
https://social.technet.microsoft.com/Forums/systemcenter/en-US/0332b156-bc36-4699-8775-a561915f35ab/scom-2012-reporting-components-with-a-shared-sql-cluster?forum=operationsmanagerdeployment
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Zenworks Linux Management Device Registration Issue

All,
Below is a detailed description of a resistration issue using Zenworks
Linux Management 7.
Hardware Configuration:
1- DSL Modem (Westell Model 2200)
1- DI 614+ 2.4 GHz Broadband Wireless Router (includes 4-5 ethernet
ports) with a IP address of 192.168.0.1
1- PC Server running Redhat SUSE Linux Enterprise Server 9 (has a static
IP address of 192.168.0.103). This machine is running the Zenworks 7
Linux Management Software and is able to sucessfully launch the Zenworks
7 Control Panel.
1- Redhat Linux Enterprise Server 3 on a completely different network
with a static IP address (207.44.142.56). This machine is running the
Zenworks Linux Management Agent install using the ./zlm-install -a
command.
Network Configuration:
The broadband DSL modem is connected directly to the WAN ethernet port on
the wireless router
The primary PC server running Redhat SUSE Linux Enterprise Server 9 has a
direct connection to one of the ethernet ports on the wireless broadboard
router with a private static IP address of 192.168.0.103 and has a public
IP of 70.22.107.168.
The DSL modem is has a direct connection to the telephone line.
The Redhat Linux Enterprise Server 3 is on a completely different network
with a IP of 207.44.142.56.
No firewalls are configured on the primary server and the wireless router
Port Forwarders are configured on the broadband wireless router as
follows:
zlm1
192.168.0.103
TCP 80/80
always
zlm2
192.168.0.103
TCP 443/443
always
zlm3
192.168.0.103
TCP 524/524
always
zlm4
192.168.0.103
TCP 1299/1299
always
zlm5
192.168.0.103
TCP 2544/2544
always
zlm6
192.168.0.103
TCP 5506/5506
always
zlm7
192.168.0.103
TCP 10389/10389
always
zlm8
192.168.0.103
TCP 10636/10636
always
Goal:
To successfully register the Redhat Linux Enterprise 3 server (i.e. the
managed device with IP 207.44.142.56) with the primary server
(192.168.0.103 SUSE Redhat Enterprise Server 9 machine) so it can be
viewed and managed from the Zenworks 7 Control panel.
Nature of Problem:
When attempting to register the managed device (207.44.142.56) with the
primary server (192.168.0.103) which resides inside of my Wireless Local
Area Network (WLAN) via the following command, it appears to fail. I'm
unable to view or configure this managed device inside of the Zenworks 7
Linux Management Control Panel. The following are 2 manual approaches
that I take to register the managed device and the results for each.
Register using private IP approach:
/opt/novell/zenworks/bin/rug sa https://192.168.0.103
Results: ERROR: Could not add 'https://192.168.0.103': Download failed:
(https://192.168.0.103/zenworks-registration/service.xml) Error:
ConnectFailure
Register using public IP approach:
/opt/novell/zenworks/bin/rug sa https://70.22.107.168
Results: ERROR: Could not add 'https://70.22.107.168': Download failed:
(https://70.22.107.168/zenworks-registration/service.xml) Error:
ConnectFailure
Regards,
Darrick Addison
Sr. Software Engineer/Consultant
ASC Technologies, LLC
Ph: 443.257.9116
Fax: 410.360.5570
E-mail: [email protected]
Web: www.asctllc.com

On Tue, 08 Nov 2005 02:40:58 GMT, [email protected] wrote:
> Below is a detailed description of a resistration issue using Zenworks
> Linux Management 7.
duplicate question - can I gently mention a point? Whilst we naturally
understand that you may need information/help in a hurry, asking the
same question in multiple forums dilutes the answers you get, and makes
more work for those of us who have to read them; it would help if you
could avoid this in future.
Many thanks
(c) Shaun Pond, stolen without permission ;-)
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

SSRS 2008 configuration Manager - "Invalid Class"

Reporting Services Configuration Manager is throwing an error when I try to "Find" the server. The manager starts up and takes me to the "Reporting Services Configuration Connection" window. I click on the "Find" button (leaving the default comptuer name as-is; the local machine) and get the error message "Invalid Class" with the title "Reporting Services Configuration Manager".
I've been searching around the interner and only found one forum post with a similar problem to my own. It was on this forum and the advice seemed to be pointing towards a problem with WMI, but it seemed that the user never found a solution. I've downloaded and ran the WMI diagnostics program and the log does contain quite a few warnings, but I don't know how to go about solving most of them. I did run regsvr32 on some dll files though :)
I won't post any logs yet, as I have no idea where the problem may be based. Please advise and I will post the required information.

Hi SiM99,
The issue shoule be caused by the case onpnt mentioned and you are trying to use Reporting Services Configuration Manager 2008 to connect to Reporting Services 2005. From your post, I am sure you never install SQL Server 2005 in the server. But, sometimes, SQL Server Express 2005 may be installed with other program. So, I would suggest you checking if SQL Server Expree 2005 is installed in the server using Services control(by running command services.msc). If SQL Server Express 2005 is installed, please uninstall it.
The issue should be caused by the uncompleted installation too. There may be a error during the installation.
Could you please check if there is any error in the installation error message?
By default, we can get the installation logs from:
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Log\Summary.txt
By the way, could you please follow these steps to check if the Reporting Services WMI provider is installed correctly?
1. Run command wbemtest
2. Click "Connect"and connect to “ROOT\Microsoft\SqlServer\ReportServer”(type this path in the Namespace textbox)
3. After connecting to the name space, click "Query" to query “SELECT * from __namespace”. There would be one data in the record window(while the server only have one RS instance).
4. Double-click the record, in the new properties windows, get the path value such as “\\<server>\ROOT\Microsoft\SqlServer\ReportServer:__NAMESPACE.Name="RS_MSSQLSERVER" ”
5. Now, close all sub dialogs, and then re-connect to “ROOT\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER”. "RS_MSSQLSERVER" is the Namespace.Name in step4
6. Query “SELECT * from __namespace” again.
7. Repeat step4,5, we will get the new path “ROOT\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER\v10”
8. Repeat step2 to 7 until there is no record in the Query result dialog. Finally, the path is \\server\ROOT\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER\v10\admin
If we can't get the final path \\server\ROOT\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER\v10\admin, it means the Reporting Services WMI provider is not installed correctly.
Please try using the following method to solve it:
1.Execute the Command windows.
2.Go to the folder C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer\bin
3.Run the command: MOFCOMP reportingservices.mof
Please feel free to ask, if you have any more questions.
Thanks,
Jin Chen
Jin Chen - MSFT

Exception with the Configuration Manager

Hi All,
I need to access the Configuration Manager in my J2EE application on NetWeaver 7.0.
I follow the guidelines on http://help.sap.com/saphelp_nw04/helpdata/en/0d/7fcb4974874767be388007bf9e5c2a/content.htm
In the application-j2ee-engine.xml file, I add:
<reference
   reference-type="hard">
   <reference-target
      provider-name="sap.com"
      target-type="service">configuration</reference-target>
</reference>
And my Java code is as follows:
Context ctx = new InitialContext();
ApplicationConfigHandlerFactory appCfgHdlFctry = (ApplicationConfigHandlerFactory)ctx.lookup("ApplicationConfiguration");
ApplicationConfigurationHandler cfgHandler = appCfgHdlFctry.getApplicationConfigurationHandler();
But, at the call appCfgHdlFctry.getApplicationConfigurationHandler() I get an Java exception:
java.rmi.RemoteException: You are trying to get-application-information of an application with name null, which is not legal
Could you tell me what cause that issue?
Thanks,
Viet

instrumento wrote:
WOW, Strike one for this web forum. It looks fine in Rich Text and HTML and looks all garbled after posting ....
Well, strike one for the browser where I was doing the post :-) It looks fine from home.
Anyone knows what is going on?

VHD for System Center Configuration Manager 2012 R2

I just downloaded of TechNet the VHD of System Center Configuration Manager 2012 R2. However when you bring it online it is in the domain Conteso. I have searched all over TechNet and the web, but there is no record of the admin password nor is there
any documented instructions with the download.
http://www.microsoft.com/en-us/download/details.aspx?id=40840
Best regards,
Dave Clauson
Partner Online Technical Community
We hope you get value from our new forums platform! Tell us what you think:
http://social.microsoft.com/Forums/en-US/partnerfdbk/threads
This posting is provided "AS IS" with no warranties, and confers no rights

Hi,
I think you should find the password for Windows Server 2012 R2. Please try
R2Preview!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

New to System Manager - Advise needed on my requirements

Hi there!
I am very new to System Manager 2012, so I am seeking advise on how to best start my project. I read the initial part of the Getting Started guide ( http://technet.microsoft.com/library/dn235548.aspx ), but System Manager is a big product so I need
to double check the direction I should take, based on my design requirements.
So here is what I am trying to achieve in two bullet points:
- I got my own monitoring system application that I can query via an API. The API is REST based (i.e. HTTP GET/POST operations) and I already wrote a Python script to query my API so I can export data and alerts from it.
- I'd like to integrate the data/alerts coming from my own monitoring application into the Microsoft System center.
Questions:
1) in the first page of the Getting Started guide, I can see I am offered the option to download several evaluation virtual hard disks (e.g. App Controller, Operation Manager, Service Manager, Orchestrator, Virtual Machine Manager). Not sure which one I
should use for what I am trying to achieve?
2) depending on the component picked in point (1), what's the best documentation link to start studying how the Microsoft application works, and how to integrate the data coming from my API?
3) is my Python script fine to run on the Microsoft Virtual Machine, in order to query my API and pass the data to the System Manager 2012?
Thanks in advance for your help, and looking forward to actively join your community!
Wally

The system center suite contains several products.
For monitoring purposes you should look into the Operations Manager product.
Have a look here for details on OpsMgr:
http://technet.microsoft.com/en-us/library/hh509025.aspx.
These forums are specifically for Configuration Manager.
Tim | Blog |
@Tim_DK

SCCM 2012 R2 Configuration Manager Client Package - stuck "In Progress"

Hi Team; I’m having 2 issues with SCCM 2012 R2:
Issue 1: I'm having a strange issue with the default XXX00002 package - "Configuration Manager Client Package",
it will not deploy to the Secondary Site DP. The console is saying "In Progress" - below is the output from the
distmgr.log file.
~Package BDC00002 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6032 (0x1790)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00002, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.444+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00002. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~SourceVersion (1) of package BDC00002. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~Package BDC00003 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6092 (0x17CC)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00003, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.464+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6032 GMTDATE=Mon Mar 17 20:00:23.476 2014
ISTR0="Configuration Manager Client Package" ISTR1="BDC00002" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="BDC00002"
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.477+240><thread=6032 (0x1790)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.476+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.484+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.476+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.495+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00003. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.496+240><thread=6092 (0x17CC)>
~SourceVersion (1) of package BDC00003. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.497+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6092 GMTDATE=Mon Mar 17 20:00:23.510 2014
ISTR0="Configuration Manager Client Upgrade Package" ISTR1="BDC00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400
AVAL0="BDC00003" $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.510+240><thread=6092 (0x17CC)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.510+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.515+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.510+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.526+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1sfb1dbj.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.571+240><thread=6032 (0x1790)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.572+240><thread=6032 (0x1790)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.574+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\abaibh8y.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.637+240><thread=6092 (0x17CC)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.683+240><thread=6092 (0x17CC)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.685+240><thread=6092 (0x17CC)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:26.886+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.948+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.950+240><thread=4900 (0x1324)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:31.934+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.021+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.023+240><thread=4900 (0x1324)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.108+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.111+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:06:28.094+240><thread=4968 (0x1368)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:30:52.271+240><thread=2936 (0xB78)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.002+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.977+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.979+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:06:55.337+240><thread=4968 (0x1368)>
Issue 2: I'm trying to deploy a couple of Packages/Applications using SCCM 2012 R2 running on Win2K8 R2 with no luck, knowing that I could install the packages
on a test VM “in the DataCenter site”, but when trying to deploy the packages to production PC “in the Office Site”,
the status is packages deployment compliance stuck at 0%
Infrastructure:
3 SCCM servers: CAS, PRI & SEC. Both CAS and PRI are in the DataCenter site, and SEC is in the Office site. The office site has several IP subnets.
Boundaries are configured through Forest Discovery “IP Ranges and AD Sites” since that the AD site should contain all the IP subnets that the AD site contains, Boundaries groups are also configured and a site reference
server is configured for each group respectively.
A OU based Collection has been configured that contains 13 PC "the collection contains the PCs that the packages should be installed.
Packages/Applications are configured correctly since that I could successfully deploy the packages to the test VM which is on the same subnet as the CAS and the PRI servers "the DataCenter subnet". The issue
is that I can't deploy the packages to production PCs in the Office subnet!
Firewall rules are configured and applied via GP, and I even turned Windows Firewall off, and still nothing! I tried to manually initiate Computer Policy download via the SCCM GUI and via a script, still no luck!
I tried configuring IP Subnet Boundaries, still no luck!!
Here are the last 2 lines in the LocationServices.log of a client PC at the Office Site:
<![LOG[MPLIST requests are throttled for 00:00:44]LOG]!><time="14:47:00.766+240" date="03-17-2014" component="LocationServices" context="" type="2" thread="5776"
file="lssecurity.cpp:4528"> <![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="14:47:00.777+240" date="03-17-2014" component="LocationServices" context="" type="1"
thread="4884" file="lsad.cpp:770">
And here are the last 4 lines in the ClientLocation.log
<![LOG[Rotating assigned management point, new management point [1] is: BBK-SCCM-PRI.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:04.880+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6311">
<![LOG[Assigned MP changed from <BBK-SCCM-PRI.bbk2310.com> to <BBK-SCCM-PRI.bbk2310.com>.]LOG]!><time="14:49:04.891+240" date="03-17-2014" component="ClientLocation" context="" type="1"
thread="3600" file="lsad.cpp:1532"> <![LOG[Rotating proxy management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:05.345+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6374">
<![LOG[Rotating local management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="14:49:05.786+240"
date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6436">
It looks like clients in the Office Site can’t connect to the DP/MP of the Secondary Site server which is also a DP.
While on the PC that the application was installed on I see the folowing in the LocationService.log:
<![LOG[Distribution Point='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSPKG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities>', Signature='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSSIG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1.tar', ForestTrust='TRUE',]LOG]!><time="14:42:59.506+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="lsutils.cpp:415"> <![LOG[Calling back with locations for location request {144620BC-4BF0-4878-9554-F67D305ECCF8}]LOG]!><time="14:42:59.522+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="replylocationsendpoint.cpp:220">
Is there something wrong with the Distribution point on the Secondary Site server?
Please help…
Thanks..

Update:
I fixed the issue with the default XXX00002 package - "Configuration Manager Client Package", it will not deploy to the Secondary Site DP. I did that through "Update Distribution Points" option, and after a while the status was 100%.
However; the second issue is still unsolved...
Please help..

New ZENworks Configuration Management 11 Forums

Similar Messages

Maybe you are looking for